L05 可靠性和可维护性 标准查询与下载

KS B ISO 11146-2:2006 激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.第2部分:一般像散束

이 규격은 레이저 빔의 폭(지름), 발산각과 전달률을 측정하는 방법을 기술한다. 이 규격은

Lasers and laser-related equipment-Test methods for laser beam widths, divergence angles and beam propagation ratios-Part 2:General astigmatic beams

JIS C 5750-3-1:2006 可靠性管理.第3-1部分:应用指南.可靠性的分析技术.方法学指南

この規格は，通常使用される信頼性解析手法の-一般的な指針について規定する。

Dependability management -- Part 3-1: Application guide -- Analysis techniques for dependability -- Guide on methodology

GJB/Z 108A-2006 电子设备非工作状态可靠性预计手册

本指导性技术文件为电子设备和系统的非工作状态可靠性预计提供了基本的数据和方法。 本指导性技术文件适用于电子设备和系统在非工作状态下的可靠性预计，其中元器件非工作可靠性详细预计法适用于产品已具有详细的元器件清单的设备研制阶段：元器件非工作计数可靠性预计法适用于产品研制的初步设计阶段。 本指导性技术文件提供的基本失效率数据未考虑核辐射环境，也未考虑电离辐射的影响。

Nonoperating reliability prediction handbook for electronic equipment

NF C20-341:2006 可靠性分析技术.可靠性方块图法和布尔数学体系法

Analysis techniques for dependability - Reliability block diagram and Boolean methods.

IEC 60706-3:2006 设备维修性.第3部分:可维修性的验证及可维修性数据的收集、分析与报告

This part of IEC 60706 describes the various aspects of verification necessary to ensure that the specified maintainability requirements of an item have been met and provides suitable procedures and test methods. While maintainability verification as such should be a mandatory part of any maintainability programme (see IEC 60300-3-10), each individual case requires appropriate methods to be carefully selected in order to ensure overall costeffectiveness. This standard also addresses the collection, analysis and presentation of maintainability related data, which may be required during, and at the completion of, design and during item production and operation.

Maintainability of equipment - Part 3: Verification of maintainability and collection, analysis and presentation of maintainability data

IEC 61124:2006 可靠性试验.恒定失效率和恒定失效强度的符合性试验

This International Standard gives a number of optimized test plans, the corresponding operating characteristic curves and expected test times. In addition the algorithms for designing test plans using a spreadsheet program are also given, together with guidance on how to choose test plans. This standard specifies procedures to test whether an observed value of – failure rate, – failure intensity, – mean time to failure (MTTF), – mean operating time between failures (MTBF), conforms to a given requirement. It is assumed, except where otherwise stated, that during the accumulated test time, the times to failure or the operating times between failures are independent and identically exponentially distributed. This assumption implies that the failure rate or failure intensity is constant. Four types of test plans are described as follows: – truncated sequential tests; – time/failure terminated tests; – fixed calendar time terminated tests without replacement; – combined test plans. This standard does not cover guidance on how to plan, perform, analyse and report a test. This information can be found in IEC 60300-3-5. This standard does not describe test conditions. This information can be found in IEC 60605-2 and in IEC 60605, Parts 3-1 to 3-6.

Reliability testing - Compliance tests for constant failure rate and constant failure intensity

IEC 60812:2006 系统可靠性分析技术.失效模式和效应分析(FMEA)程序

Describes the procedure and gives guidance as to how they may be applied to achieve various objectives by providing the procedural steps necessary to perform an analysis, by identifying appropriate terms, assumptions, criticality measures, failure modes,

Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)

IEC 61078:2006 可靠性分析技术.可靠性方框图和布尔代数法

This International Standard describes procedures for modelling the dependability of a system and for using the model in order to calculate reliability and availability measures. The RBD modelling technique is intended to be applied primarily to systems without repair and where the order in which failures occur does not matter. For systems where the order of failures is to be taken into account or where repairs are to be carried out, other modelling techniques, such as Markov analysis, are more suitable. It should be noted that although the word “repair” is frequently used in this standard, the word “restore” is equally applicable. Note also that the words “item” and “block” are used extensively throughout this standard: in most instances interchangeably.

Analysis techniques for dependability - Reliability block diagram and boolean method

KS A IEC 61124:2005 可靠性测试.恒定故障率及恒定故障强度的符合性试验

이 규격은 다음의 관찰된 값이 일정한 요건에 적합한지를 시험하기 위한 절차를 규정한다.

Reliability testing-Compliance tests for constantfailure rate and constant failure intensity

KS A IEC 61164:2005 可靠性增长.统计审定及测定方法

이 규격은 신뢰도 향상 프로그램에서 생성된 고장 데이터에 근거한 신뢰도 성장 평가를 위

Reliability growth-Statistical test and estimation methods

KS A IEC 62309:2005 产品的可靠性(包括重复使用部件).机能及实验的要求事项

이 규격에서는 재사용 부품의 신뢰성 및 기능과 신제품에 재사용 부품의 사용을 검토하기 위한

Dependability of products containing reused parts-Requirements for functionality and tests

NF C20-300-3-3:2005 可靠性管理.第3-3部分:应用指南.寿命周期成本分析

Dependability management - Part 3-3 : application guide - Life cycle costing analysis.

IEC 60300-3-3:2005 可信性管理.第3-3部分:应用指南.生命周期成本分析

Provides a general introduction to the concept of life cycle costing, covers all applications and particularly highlights the costs associated with dependability of the product. Explains the purpose and value of life cycle costing and outlines the genera

Dependability management - Part 3-3: Application guide - Life cycle costing

DIN EN 60300-3-2:2005 可信性管理.第3-2部分:应用指南.可信性数据的现场收集

This part of IEC 60300 provides guidelines for the collection of data relating to reliability, maintainability, availability and maintenance support performance of items operating in the field. It deals in general terms with the practical aspects of data collection and presentation and briefly explores the related topics of data analysis and presentation of results. This standard can be applied during monitoring of samples of items or, more widely, of whole populations. It is applicable, without restriction to diverse items, from components to systems and networks, including hardware, software and man/machine interactions.

Dependability management - Part 3-2: Application guide - Collection of dependability data from the field (IEC 60300-3-2:2004); German version EN 60300-3-2:2005

GJB 451A-2005 可靠性维修性保障性术语

本标准规定了有关可靠性、维修性和保障性的常用术语及其定义。 本标准适用于军用产品的可靠性、维修性和保障性的有关工作。

Reliability, maintainability and supportability terms

JEDEC JESD48B-2005 产品不连续性

This standard is applicable to suppliers and affected customers of electronic components.

Product Discontinuance

DIN EN 60300-3-1:2005 可靠性管理.第3-1部分:应用指南.可靠性分析技术.方法指南(IEC 60300-3-1-2003)

This part of IEC 60300 gives a general overview of commonly used dependability analysis techniques. It describes the usual methodologies, the advantages and disadvantages, data input and other conditions for using various techniques.This standard is an introduction to selected methodologies and is intended to provide the necessary information for choosing most appropriate analysis methods.

Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology (IEC 60300-3-1:2003); German version EN 60300-3-1:2004

BS EN 60300-3-2:2005 可靠性管理.应用指南.现场收集可靠性数据

This part of IEC 60300 provides guidelines for the collection of data relating to reliability, maintainability, availability and maintenance support performance of items operating in the field. It deals in general terms with the practical aspects of data collection and presentation and briefly explores the related topics of data analysis and presentation of results. Emphasis is made on the need to incorporate the return of experience from the field in the dependability process as a main activity. This standard can be applied during monitoring of a population sample or, more widely, of whole populations. It is applicable, without restriction to diverse items, from components to systems and networks, including hardware, software and man/machine interactions. The items considered may have been designed, manufactured, installed, operated and maintained by one or more organizations. This standard applies to all possible relationships between suppliers and users. It applies to situations where some items may be repaired on site while others may only be replaced on site and repaired at centralized facilities. No recommendations are made, however, of how to organize maintenance support.

Dependability management - Application guide - Collection of dependability data from the field

DIN EN 60300-3-3:2005 可靠性管理.第3-3部分:应用指南.寿命周期费用分析

This part of IEC 60300 provides a general introduction to the concept of life cycle costing and covers all applications. Although the life cycle costs consist of many contributing elements, this standard particularly highlights the costs associated with dependability of the product. This standard is intended for general application by both customers (users) and suppliers of products. It explains the purpose and value of life cycle costing and outlines the general approaches involved. It also identifies typical life cycle cost elements to facilitate project and programme planning.#,,#

Dependability management - Part 3-3: Application guide - Life cycle costing (IEC 60300-3-3:2004); German version EN 60300-3-3:2004

DIN EN 62309:2005 含再用部件的产品的可靠性.功能性要求和试验

Dependability of products containing reused parts - Requirements for functionality and test (IEC 62309:2004); German version EN 62309:2004