L05 可靠性和可维护性 标准查询与下载

KS A IEC 62429:2009 可靠性成长.独特复合系统的早期故障压力测试

이 표준은 ‘유일 복합 시스템’의 최종 시험이나 수락 시험에서 신뢰성 성장에 관한 지침을

Reliability growth-Stress testing for early failures in unique complex systems

GJB 6919-2009 导电纤维丝束性能测试评价方法

本标准规定了导电纤维丝束性能测试评价的基本要求、测试项目、测试方法和数据处理等。 本标准适用于对电力设施实施攻击的导电纤维丝束性能测试评价。

Test and evaluation methods of conductorial-fibre performance

BS EN 60300-3-16:2008 可靠性管理.第3-16部分:应用指南.维护支持业务规范指南

This part of IEC 60300 describes a framework for the specification of services related to the maintenance support of products, systems and equipment that are carried out during the operation and maintenance phase. The purpose of this standard is to outline, in a generic manner, the development of agreements for maintenance support services as well as guidelines for the management and monitoring of these agreements by both the company and the service provider. This standard is intended for use by a wide range of suppliers, maintenance support organizations and users and can be applied to all items. For consistency in this standard, the user, operator and owner are referred to as the company and the organization or vendor providing the maintenance support service is called the service provider. This standard is applicable to items, which include all types of products, equipment and systems (hardware and software). Most of these require a certain level of maintenance to ensure that their required functionality, dependability, capability, economic, safety and regulatory requirements are achieved. NOTE For consistency, this standard will use the term “item” as defined in 3.1.4, except where the context requires otherwise.

Dependability management — Part 3-16: Application guide — Guidelines for specification of maintenance support services

IEC 60300-3-15:2009 可信性管理.第3-15部分:应用指南.系统可靠性工程

This part of IEC 60300 provides guidance for an engineering system’s dependability and describes a process for realization of system dependability through the system life cycle. This standard is applicable to new system development and for enhancement of existing systems involving interactions of system functions consisting of hardware, software and human elements. This standard also applies to providers of subsystems and suppliers of products that seek system information and criteria for system integration. Methods and tools are provided for system dependability assessment and verification of results for achievement of dependability objectives.

Dependability management – Part 3-15: Application guide – Engineering of system dependability

IEC 60300-3-11:2009 可信性管理.第3-11部分:应用指南.可靠性为中心的维修

Dependability management - Part 3-11: Application guide - Reliability centred maintenance

DIN EN 60300-3-16:2009 可靠性管理 第3-16部分 应用指南 维护支持服务的规范指南

Dependability management - Part 3-16: Application guide - Guidelines for the specification of maintenance support services (IEC 60300-3-16:2008); German version EN 60300-3-16:2008

BS EN 60300-3-4:2008 可靠性管理.应用指南.可靠性要求的规范指南

This part of IEC 60300 gives guidance on specifying the required dependability characteristics in specifications, together with specifications of procedures and criteria for verification and validation. The guidance provided includes the following: – advice on specifying quantitative and qualitative reliability, maintainability, availability and maintenance support requirements; – advice to purchasers of a system on how to ensure that the specified requirements will be fulfilled by suppliers; – advice to suppliers to help them to meet purchaser requirements. Other documents, such as legislation and governmental regulation may also place requirements on systems and these should be applied in addition to any specifications derived in accordance with this standard. NOTE 1 Whilst mainly addressing system and equipment level reliability, many of the techniques described in the different parts of IEC 60300 may also be applied to products, items or at the component level. The term system is used throughout this standard. NOTE 2 This standard does not give guidance on the management of dependability programmes or on the various activities necessary to fulfil stated availability, reliability, maintainability and maintenance support requirements. For this general guidance, see other standards. NOTE 3 Safety and environment specifications are not directly considered in this guide. However, much of the guidance in this standard could also be applied to safety or environmental specification. NOTE 4 Specifications for the dependability of a service are not considered in this guide. This includes the provision of a service such as those provided through Public-Private Partnership procurements.

Dependability management - Application guide - Guide to the specification of dependability requirements

DIN EN 62429:2008 可靠性增长.在特定综合系统中的早期失效压力测试

Reliability growth - Stress testing for early failures in unique complex systems (IEC 62429:2007); German version EN 62429:2008

BS EN 62429:2008 可靠性增长 在特定综合系统中的早期失效应力测试

Reliability growth - Stress testing for early failures in unique complex systems

NF C20-300-3-4*NF EN 60300-3-4:2008 可靠性管理.第3-4部分:应用指南.可靠性要求的规范指南

Dependability management - Part 3-4 : application guide - Guide to the specification of dependability requirements.

DIN EN 60300-3-4:2008 可靠性管理.第3-4部分:应用指南.可靠性要求的规范指南

Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements (IEC 60300-3-4:2007); German version EN 60300-3-4:2008

JIS C 5750-4-2:2008 可靠性管理.第4-2部分:软件使用期的可靠性.应用指南

この規格は，信頼できるソフトウェアの達成に影響を与えるソフトウェアライフサイクルのアクティビティのすべて及びディペンダビリティプログラム諸活動の側面に関する指針について規定する。

Dependability management -- Part 4-2: Software dependability through the software life-cycle processes -- Application guide

JIS C 5750-4-1:2008 可靠性管理.第4-1部分:应用指南.含回收再利用部件的产品的可靠性.功能性和试验的要求

この規格は，リュース部品を新製品に組み込む場合における，リュース部品の信頼性と機能性とを確認するための考え方及び使用法について規定する。それは.製品の設計寿命に関して，再認定されていることが宜言されたリュース部品を含んでいる製品に，必要とする試験又は分析についての情報及び諸基準を提供する。

Dependability management -- Part 4-1: Application guide -- Dependability of products containing reused parts -- Requirements for functionality and test

ANSI/VITA 51.0-2008 可靠性预测

This document provides an electronics failure rate predicition methodology and self assessment standard.

Reliability Prediction

IEC 62429:2007 可靠性增长 在特定综合系统中的早期失效压力测试

This International Standard gives guidance for reliability growth during final testing or acceptance testing of unique complex systems. It gives guidance on accelerated test conditions and criteria for stopping these tests. “Unique” means that no information exists on similar systems, and the small number of produced systems means that information deducted from the test has limited use for future production. This standard concerns reliability growth of repairable complex systems consisting of hardware with embedded software. It can be used for describing the procedure for acceptance testing, "running-in", and to ensure that reliability of a delivered system is not compromised by coding errors, workmanship errors or manufacturing errors. It only covers the early failure period of the system life cycle and neither the constant failure period, nor the wear out failure period. It can also be used when a company wants to optimize the duration of internal production testing during manufacturing of prototypes, single systems or small series. It is applicable mainly to large hardware/software systems, but does not cover large networks, for example telecommunications and power networks, since new parts of such systems cannot usually be isolated during the testing. It does not cover software tested alone, but the methods can be used during testing of large embedded software programs in operational hardware, when simulated operating loads are used. It addresses growth testing before or at delivery of a finished system. The testing can therefore take place at the manufacturer's or at the end user's premises. If the user of a system performs reliability growth by a policy of updating hardware and software with improved versions, this standard can be used to guide the growth process. This standard covers a wide field of applications, but is not applicable to health or safety aspects of systems. This standard does not apply to systems that are covered by IEC 62279[39].

Reliability growth - Stress testing for early failures in unique complex systems

DIN EN 60068-2-69:2007 环境测试.第2-69部分:试验.试验Te:润湿称量法进行表面安装设备(SMD)电子元件的可焊性测试

Environmental testing - Part 2-69: Tests - Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method (IEC 60068-2-69:2007); German version EN 60068-2-69:2007

IEC 60300-3-4:2007 可靠性管理.第3-4部分:应用指南.可靠性要求的规范指南

This part of IEC 60300 gives guidance on specifying the required dependability characteristics in specifications，together with specifications of procedures and criteria for verification and vaIidation． The guidance provided includes the following： 一advice on specifying quantitative and qualitative reliability，maintainability，availability and maintenance support requirements； ——advice to purchasers of a system on how to ensure that the specified requirements will be fulfilled by suppliers； 一advice to suppliers to help them to meet purchaser requirements． Other documents，such as legislation and governmental regulation may also place requirements on systems and these should be applied in addition to any specifications derived in accordance with this standard． NOTE 1 Whilst mainly addressing system and equipment level reliability．many of the techniques described in the different parts of IEC 60300 may also be applied to products，items or at the component level．The term system is used throughout this standard． NOTE 2 This standard does not give guidance on the management of dependability programmes or on the various activities necessary to fulfil stated availability，reliability，maintainability and maintenance support requirements． For this general guidance，see other standards． NOTE 3 Safety and environment specifications are not directly considered in this guide．However，much of the guidance in this standard could also be applied to safety or environmental specification NOTE 4 Specifications for the dependability of a service are not considered in this guide．This includes the provision of a service such as those provided through Public—Private PartnershiP procurements．

Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements

BS EN 61163-1:2006 可靠性应力筛分.第1部分:批制造的可修复组件

This part of IEC 61163 describes particular methods to apply and optimize reliability stress screening processes for lots of repairable hardware assemblies, in cases where the assemblies have an unacceptably low reliability in the early failure period, and when other methods, such as reliability growth programmes and quality control techniques, are not applicable. The reasons for using reliability stress screening may be time constraints and/or the very nature of the deficiencies that the reliability stress screening is designed to catch. The processes apply to any stage of a series production of repairable assemblies (see Figure 3). The methods for setting up a process can be used during production planning, during pilot-production, as well as during well-established running production. A prerequisite for the application of the methods is that a certain level of flaws remaining in the outgoing assembly can be specified. The processes described are general processes for reliability stress screening in cases where no specific process is described in a product standard. They are also intended for use by IEC committees in connection with preparation of product standards. A reliability stress screening process can form part of an overall reliability programme (see IEC 60300-2).

Reliability stress screening - Part 1: Repairable assemblies manufactured in lots

JEDEC JESD659B-2007 故障机械传动可靠性监测

This standard presents a methodology for monitoring component and subassembly reliability. It can be of use to suppliers and users interested in known reliability as an attribute of the component through the production life.

Failure-Mechanism-Driven Reliability Monitoring [Replaced: JEDEC JESD29-A]

KS A IEC 61709:2006 电子部件.可靠性.变换的故障率及应力模型的基准条件

이 규격은 전자장비에 사용되는 부품의 신뢰성 예측을 위해 고장률 데이터 사용에 관한 지침을

Electronic components－Reliability－Reference conditions for failure rates and stress models for conversion