L62 计算机设备 标准查询与下载

JJF 1261.6-2012 计算机显示器能源效率标识计量检测规则

本规则规定了在电网电压下正常工作的普通用途计算机使用的独立的阴极射线管显示设备、液晶显示设备和主要功能为计算机显示器的带有调谐器/接收器的显示设备的能源效率标识的计量要求、计量检测程序、计量检测方法、计量检测结果评定准则和检测报告等内容。 本规则适用于显示器能源效率标识计量监督检测,委托检测可参考本规则进行。生产和销售显示器产品的单位亦可参照本规则进行检测。 本规则不适用于具有显示器功能但主要功能为电视的显示设备。 接受检测的显示器应是生产者自检合格的产品，或者是销售者进口、销售的商品。

Rules of Metrology Testing for Energy Efficiency Label of Computer Monitors

ISO/IEC/IEEE 60559:2011 信息技术.微处理器系统.浮点算法

Information technology - Microprocessor Systems - Floating-Point arithmetic

IEEE 1413-2010 硬件可靠性预测的架构

Standard Framework for Reliability Prediction of Hardware

ANSI/NFPA 75-2009 信息技术设备的保护标准

This standard covers the requirements for the protection of information technology equipment and information technology equipment areas.

Standard for the Protection of Information Technology Equipment

ANSI/INCITS 407 Erratum-2009 信息技术.基本输入输出系统增强的光盘驱动器设施.3(EDD-3),勘误表

Information Technology - BIOS Enhanced Disk Drive Services - 3 (EDD-3), Erratum

HS/T 19-2006 海关计算机系统软硬件选型规范

Regulations on selecting types of software and hardware for computer system at Custom

ANSI/IEEE 1101.1:2008 使用IEC 60603-2连接器的微型计算机用机芯规范的标准

The basic dimensions of a range of modular subracks conforming to IEC 60297-3 (1984-01) and IEC 60297-4 (1995-03) for mounting in equipment according to IEC 60297-1 (1986-09) and ANSI/EIA 310-D-1992, together with the basic dimensions of a compatible range of plug-in units, printed boards, and backplanes, are covered. The dimensions and tolerances necessary to ensure mechanical function compatibility are provided. This standard offers total system integration guidelines (advantages: shorter design and development time, etc.).

Standard for Mechanical Core Specifications for Microcomputers Using IEC 60603-2 Connectors

ANSI/IEEE 1014:2008 通用底板总线用标准:VME总线

This standard specifies a high-performance backplane bus for use in microcomputer systems that employ single or multiple microprocessors. It is based on the VMEbus specification, released by the VME Manufacturers' Group in August of 1982. The bus includes four subbuses: data transfer bus, priority interrupt bus, arbitration bus, and utility bus. The data transfer bus supports 8-, 16-, and 32-bit transfers over a non-multiplexed 32-bit data and address highway.

Standard for a Versatile Backplane Bus: VMEbus

KS C IEC TS 62393:2007 便携式和手持式多媒体设备.移动计算机.蓄电池运行时间的测量

이 규격은 배터리 실행 시간에 대해 표준화하는 문제를 명확히 하기 위해서, 특별한 예로서

Portable and hand-held multimedia equipment-Mobile computers-Battery run-time measurement

KS X 5001-2007 个人计算机(1)

이 규격은 개인용 컴퓨터(1)(이하 개인용 컴퓨터라 한다)의 구성 및 이와 관련된 주요 기

Personal computer(1)

KS X 5002-2007 键盘的字母数字键排列

이 규격은 정보처리용 자료 입력 장치에서 공통적으로 수용하는 건반부분의 배열에 대한 상대적

Keyboard layout for information processing

ANSI/ISA 60079-27-2007 现场总线本质安全概念(FISCO)和现场总线不易燃概念(FNICO)

This standard contains the details of apparatus, systems and installation practice for use with the Fieldbus Intrinsically Safe Concept (FISCO) for installation and use in Class I, Zones 0 and 1 and the Fieldbus Non-Incendive Concept (FNICO) for installation and use in Class I, Zone 2. It is based on the concepts of Manchester encoded, bus powered systems designed in accordance with IEC 61158-2 which is the physical layer standard for Fieldbus installations.

Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO)

GJB 5866-2006 多模块欧式卡(VME)64位数据总线

VME 总线标准规定了在紧耦合硬件配置中，用于互连微处理器、数据存储设备和外围控制设备的接口系统。该接口系统设计目的如下： a）允许 VME 总线上各设备之间相互通信，但不干扰连接到 VME 总线上其他设备的内部活动； b）规定设计设备时所要求的电气和机械特性，该设备可同 VME 总线系统上其他设备进行可靠的通信； c）规定详细定义 VME 总线和与其接口的设备之间相互作用的协议； d）提供描述系统协议的术语和定义； e）允许有较大的设计余量，以使设计者可优化性能价格比，而又不影响系统的兼容性； f） 提供一个性能主要受器件限制而不受系统接口限制的系统。

Versa Module Eurocard (VME) 64 bit data bus

ITU-T Y.1542-2006 达到端到端IP性能目标的框架 第12研究组

Compared to networks and systems that are circuit-based, those based on IP pose distinctly different challenges for planning and achieving the end-to-end performance levels necessary to adequately support the wide array of user applications (voice, data,

Framework for achieving end-to-end IP performance objectives Study Group 12

ITU-T Y.1391-2006 多承载、多载波环境中的业务管理结构

This Recommendation defines architectural requirements for the edge-to-edge management and/or control of client services transported over various transport network topologies and technologies. The services for which such management capabilities are requir

Architecture of service management in multi bearer multicarrier environment

ITU-T Y.1381-2006 传输MPLS(T-MPLS)体系传输网络设备功能块的特性

Characteristics of Transport MPLS equipment functional blocks Also Known as G.1381

Characteristics of Transport MPLS equipment functional blocks Also Known as G.1381

ITU-T Z.146-2006 测试和测试控制符号版本3:国际应急首选方案的支持(第17研究组)

This Recommendation defines the way of using ASN.1 as defined in ITU-T Recs X.680, X.681, X.682 and X.683 with TTCN-3 (Testing and Test Control Notation 3) as defined in ITU-T Rec. Z.140. Content of this Recommendation has been moved into this separate Re

Testing and Test Control Notation version 3 (TTCN-3): Using ASN.1 with TTCN-3 Study Group 17

ITU-T Z.144-2006 测试和测试控制符号版本3:国际应急首选方案的支持(第17研究组)

In this Recommendation, the expression "Administration" is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.

Testing and Test Control Notation version 3 (TTCN-3): Runtime interface (TRI) Study Group 17

ITU-T Z.145-2006 测试和测试控制符号版本3:国际应急首选方案的支持(第17研究组)

Testing and Test Control Notation version 3 (TTCN-3): Control Interface (TCI) Study Group 17

Testing and Test Control Notation version 3 (TTCN-3): Control Interface (TCI) Study Group 17

ITU-T Y.2601-2006 基于未来数据包网络的基本特点和要求 第13研究组

This Recommendation provides fundamental characteristics of a future packet based network (FPBN). This Recommendation provides user plane, control plane and management plane requirements for the architecture of an FPBN comprised of transport stratum packe

Fundamental characteristics and requirements of future packet based networks Study Group 13