L62 计算机设备 标准查询与下载

NAVY MIL-C-85388 NOTICE 1-1996 CP-1444/A型武器瞄准电脑

MIL-C-85388(AS) is inactive for new design and is no longer used, except for replacement purposes.

COMPUTER, WEAPON AIMING CP-1444/A

ARINC 644A BOOK-1996 便携式多用途接入终端

Portable Multi-Purpose Access Terminal (PMAT)

Portable Multi-Purpose Access Terminal (PMAT)

ARINC 644A-1996 便携式多用途接入终端

Portable Multi-Purpose Access Terminal (PMAT)

Portable Multi-Purpose Access Terminal (PMAT)

AIR FORCE MIL-STD-1750 A NOTICE 4-1996 十六位计算机指令集架构

SIXTEEN-BIT COMPUTER INSTRUCTION SET ARCHITECTURE

SIXTEEN-BIT COMPUTER INSTRUCTION SET ARCHITECTURE

PD 6595-1996 欧洲微试验芯片用参数提取技术

Parameter extraction techniques for the European mini test chip

EP 202-1996 BSI 电子笔记本.演示管理系统

BSI Electronic Book. Environmental Management Systems

IEEE 1101.10-1996 使用IEEE 1101.1-91设备规程的微计算机附加机械规范

Specifies dimensions which will ensure the mechanical and "Requirements and Tests of Environmental Conditions for Structures for Electronic Equipment" interchangeability of subracks and plug-in units, based on IEEE Std 1101.1, IEC 297-3, IEC 297-4, using IEC 603-2 based connectors and IEC 48D/1587-1 and IEC 48D/1587-3 requirements.

Standard for Additional Mechanical Specifications for Microcomputers Using the IEEE Std 1101.1-1991 Equipment Practice IEEE Computer Society Document

NAVY MIL-C-85247 NOTICE 2-1996 CP-1005A/A型大气数据计算机

MIL-C-85247(AS) is inactive for new design and is no longer used, except for replacement

COMPUTER, AIR DATA CP-1005A/A

ANSI/IEEE 1156.2:1996 计算机系统的环境规范标准

Contains minimum environmental withstand conditions applicable to computer systems and all of their associated components.

Standard for Environmental Specifications for Computer Systems

ANSI/IEEE 1101.10:1996 使用IEEE标准1101.1-1991设备实施规程的微型电子计算机用附加机械规范标准

Specifies dimensions which will ensure the mechanical and "Requirements and Tests of Environmental Conditions for Structures for Electronic Equipment" interchangeability of subracks and plug-in units, based on IEEE Std 1101.1, IEC 297-3, IEC 297-4, using IEC 603-2 based connectors and IEC 48D/1587-1 and IEC 48D/1587-3 requirements.

Standard for Additional Mechanical Specifications for Microcomputers Using the IEEE Std 1101.1-1991 Equipment Practice

EP 202-1995 BSI 电子笔记本.演示管理系统

BSI Electronic Book. Environmental Management Systems

ISO/IEC 14536:1995 信息技术 微处理机系统 未来总线+TM、轮廓M(军用)

Information technology - Microprocessor systems - Futurebus+<(hoch)TM>, Profile M (military)

BS ISO/IEC 13963:1995 信息技术.90mm光盘盒式磁带的数据交换.容量:每盒式磁带230兆位

This International Standard specifies the characteristics of 90 mm Optical Disk Cartridges (ODC) with a capacity of 230 Mbytes per Cartridge. The Standard specifies three related, but different implementations of such cartridges, viz. Type R/W Provides for data to be written, read and erased many times over the whole recording surface of the disk using the thermo-magnetic and magneto-optical effects. Type P-ROM Provides for a part of the disk surface to be embossed by stamping or other means. This part of the disk is read without recourse to the magneto-optical effect. All parts which are not embossed provide for data to meet the requirements of Type R/W. Type O-ROM Provides for the whole of the disk surface to be embossed and reproduced by stamping or other means. This type of disk is read without recourse to the magneto-optical effect. Type R/W, Type P-ROM and Type 0-ROM are also referred to as "fully rewritable", "partially embossed" and "fully embossed", respectively. This International Standard specifies - the conditions for conformance testing and the Reference Drive; - the environments in which the cartridges are to be operated and stored; - the mechanical and physical characteristics of the cartridge, so as to provide mechanical interchangeability between data processing systems; - the format of the information on the disk, both embossed and user-written; including the physical disposition of the tracks and sectors, the error correction codes, and the modulation method used; - the characteristics of the embossed information on the disk; - the magneto-optical characteristics of the disk, enabling processing systems to write data onto the disk; - the minimum quality of user-written data on the disk, enabling data processing systems to read data from the disk. This International Standard provides for interchange between optical disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 230 megabytes per cartridge

ARMY MIL-C-51327 NOTICE 1-1995 M28A1型核计算机设备

This commercial item description covers brown kraft paper used for general wrapping applications.

CALCULATOR SET, NUCLEAR, M28A1

BS ISO/IEC 13213:1995 信息技术.微处理器系统.微型计算机总线控制和状态寄存器(CSR)体系机构

Defines the address-space maps, the bus transaction sets, and the node's CSRs. Includes the format and content of the configuration ROM on the node providing the parameters necessary to autoconfigure systems with nonprocessor nodes provided by multiple vendors. The annexes provide background for understanding the usage of this CSR Archtecture specification.

Information technology - Microprocessor systems - Control and Status Registers (CSR) Architecture for microcomputer buses

BS ISO/IEC 10861:1995 信息技术.微处理器系统.高性能同步32位总线:多总线Ⅱ

Defines the operation, functions, and attributes of the IEEE 1296 bus standard. Defines a high-performance 32-bit synchronous bus standard. Intended for general purpose applications to optimize block transfers, including protocol for message passing. Intended to support multiple processor modules in a functionally partitioned configuration and heterogeneous processor types in the same system and heterogeneous processor types in the same system.

Information technology - Microprocessor systems - High-performance synchronous 32-bit bus: MULTIBUS II

DLA SMD-5962-94734-1995 16 MEG X 1 DRAM数字的互补金属氧化物半导体硅单片电路线型微电路

This drawing forms a part of a one part -one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes Q and M) and space application (device class V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN).

MICROCIRCUIT, MEMORY, DIGITAL, CMOS, 16 MEG X 1 DRAM, MONOLITHIC SILICON

DLA SMD-5962-95569-1995 32-BIT植入的精简指令集计算机微型处理器硅单片电路线型微电路

his drawing forms a part of a one part -one part number documentation system (see 6.6 herein). Two product assurance classes consisting of mllitary high reliability (device classes Q and M) and space application I (device class V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Nuher (PIN).

MICROCIRCUIT, DIGITAL, 32-BIT EMBEDDED RISC MICROCPROCESSOR, MONOLITIC SILICON

DLA SMD-5962-94733-1995 数字的互补金属氧化物半导体1200配置逻辑排列硅单片电路线型微电路

This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of mi Litary high r e l . isbility (device classes Q and MI and space application (device class VI, and a choice of case outlines and lead finishes are available and are reflected i n the Part or Identifying Number (PIN). Available, a choice of Radiation Hardness Assurance (RHA) levels are reflected I n the PIN. Device class M microcircuits represent non-JAN class B microcircuits I n accordance with 1 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 I n conjunction with compliant non-JAN devices". When

MICROCIRCUIT, MEMORY, DIGITAL, CMOS 12000 GATE CONFIGURABLE LOGIC ARRAY, MONOLITHIC SILICON

DLA SMD-5962-90548 REV A-1995 硅单片,小型电脑系统界面总线控制器,线性微型电路

This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of radiation hardness assurance (RHA) levels are reflected in the PIN.

MICROCIRCUIT, DIGITAL, CMOS, SCSI BUS CONTROLLER, MONOLITHIC SILICON