M54 遥控、遥测设备与系统 标准查询与下载

BS EN 60870-6-503:2014 遥测设备和系统.符合ISO标准和ITU-T推荐标准的远程控制协议.TASE.2服务和协议

Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. TASE.2 Services and protocol

BS EN 60870-6-702:2014 遥控设备和系统.符合ISO标准和ITU-T推荐标准遥控协议.提供终端系统用TASE.2应用服务的功能概况

Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. Functional profile for providing the TASE.2 application service in end systems

IEC 60870-6-702:2014 远动设备和系统 第6-702部分:与ISO标准及ITU-T建议兼容的远动规约 在终端系统中提供TASE.2应用服务的功能性协议子集

This part of IEC 60870 is a functional profile (FP) and defines the provision of the TASE.2 communications services between two control centre end systems. It is supported by the transport services implemented in accordance with transport-profiles defined for the type of network that interconnects the control centre end systems. This is demonstrated in Figure 1. This FP also defines the provision of the OSI connection-mode presentation and session services between the end systems. ISO/ISP 14226 specifies the AMM11 profiles for MMS. The parts of ISO/ISP 14226 that cover the profile that are used as a basis for this FP are ISO/ISP 14226-1 and ISO/ISP 14226-2. This FP is in alignment with ISO/ISP 14226@ as far as possible@ and maintains this compatibility by reference. There are TASE.2 requirements in addition to ISO/ISP 14226. These requirements are specified in this FP.

Telecontrol equipment and systems - Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.2 application service in end systems

IEC 60870-6-503:2014 远程控制设备和系统.第6-503部分:与ISO标准和ITU-T推荐标准相一致的远程控制协议.TASE.2服务和协议

General This part of IEC 60870 specifies a method of exchanging time-critical control centre data through wide-area and local-area networks using a full ISO compliant protocol stack. It contains provisions for supporting both centralized and distributed architectures. This standard includes the exchange of real-time data indications@ control operations@ time-series data@ scheduling and accounting information@ remote program control and event notification. Though the primary objective of TASE.2 is to provide control centre (telecontrol) data exchange@ its use is not restricted to control centre data exchange. It may be applied in any other domain having comparable requirements. Examples of such domains are power plants@ factory automation@ process control automation@ and others. This standard does not specify individual implementations or products@ nor does it constrain the implementation of entities and interfaces within a computer system. This standard specifies the externally visible functionality of implementations together with conformance requirements for such functionalities.

Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocol

IEC 60870-6-802:2014 远程控制设备和系统.第6-802部分:与ISO标准和ITU-T推荐标准相一致的远程控制协议.TASE.2对象模型

This part of IEC 60870 specifies a method of exchanging time-critical control centre data through wide-area and local-area networks using a full ISO compliant protocol stack. It contains provisions for supporting both centralized and distributed architectures. The standard includes the exchange of real-time data indications@ control operations@ time series data@ scheduling and accounting information@ remote program control and event notification.

Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models

BS IEC 62843:2013 远程保护和多路复用器设备间的N次64kb/s光纤接口标准

Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment

IEC TS 60870-5-7:2013 远程控制设备和系统 第5-7部分 IEC 60870-5-101标准和IEC 60870-5-104标准的安全扩展

Telecontrol equipment and systems - Part 5-7: Security extensions to IEC 60870-5-101 and IEC 60870-5-104 protocols (applying IEC 62351)

IEC 57/1308/DTS:2012 IEC/TS 60870-5-7:遥控设备和系统.第5-7部分:IEC 60870-5-101标准和IEC 60870-5-104标准协议的安全扩展(IEC 62351-5 标准安全认证)

IEC/TS 60870-5-7: Telecontrol equipment and systems - Part 5-7: Security extensions to IEC 60870-5-101 and IEC 60870-5-104 protocols (IEC 62351-5 secure authentication)

CJJ/T 151-2010 城市遥感信息应用技术规范

Technical Specifications for Urban Remote Sensing Information Application

DIN IEC/TS 60870-5-604:2010 远程控制设备和系统.第5-604部分:IEC 60870-5-104配套标准的一致性试验案例

The document describes test cases for conformance testing of telecontrol equipment, Substation Automation Systems (SAS) and telecontrol systems, including front-end functions of SCADA

Telecontrol equipment and systems - Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard (IEC/TS 60870-5-604:2007)

KS C IEC 60870-6-802:2009 远程控制设备和系统.第6-802部分:与ISO标准和ITU-T推荐标准相一致的远程控制协议.TASE.2目标模式

이 표준은 ISO 완전 적합 통신규약 스택을 사용하여 광역 및 지역 망을 통하여 시간-결정

Telecontrol equipment and systems-Part 6-802:Telecontrol protocols compatible with ISO standards and ITU-T recommendations-TASE.2 Object models

KS C IEC TS 60870-5-604:2009 远程控制设备和系统.第5-604部分:KS C IEC 60870-5-104配套标准的合格性试验案例

이 표준은 원격제어 장비, 변전소 제어 시스템[SAS] 및 SCADA의 전단 기능들을 포함

Telecontrol equipment and systems-Part 5-604:Conformance test cases for the KS C IEC 60870-5-104 companion standard

KS C IEC 60870-5-601:2009 遥控设备和系统.第5-601部分:KS C IEC 60870-5-101配套标准的一致性试验案例

이 표준은 원격제어 장비, 변전소 제어 시스템(SAS) 및 SCADA의 전단 기능들을 포함

Telecontrol equipment and systems-Part 5-601:Conformance test cases for the KS C IEC 60870-5-101 companion standard

KS C IEC 60870-6-504:2009 遥控设备和系统.第6-504部分:与ISO标准和ITU-T推荐标准互通的遥控协议.TASE.1用户约定

이 기술 보고서는 TASE.1 응용 프로그램 인터페이스(TAPI), 즉 매개변수 사용 및

Telecontrol equipment and systems-Part 6-504:Telecontrol protocols compatible with ISO standards and ITU-T recommendations-TASE.1 user conventions

KS C IEC 60870-6-702:2009 远动设备和系统.第6-702部分:与ISO标准及ITU-T建议兼容的远动规约.在终端系统中提供TASE.2应用服务的功能性协议子集

이 표준은 기능 프로파일(FP)로 두 제어 센터 종단 시스템들 사이의 TASE.2 통신 서

Telecontrol equipment and systems-Part 6-702, Telecontrol protocols compatible with ISO standards and ITU-T recommendations-Functional profile for providing the TASE.2 application service in end systems

DIN EN 60870-5-6:2009 遥控设备和系统.第5.6部分:符合性测试指南IEC60870-5伙伴标准(IEC 60870-5-6:2006)

Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the EN 60870-5 companion standards (IEC 60870-5-6:2006); German version EN 60870-5-6:2009

BS EN 13757-5:2008 仪表及其远程读数通信系统.第5部分:无线终极转发

This standard defines the requirements for the protocols to use when performing relaying in wireless meter readout networks. This document is an extension to Part 4 of EN 13757, Wireless meter readout (Radio meter reading for operation in the 868 MHz to 870 MHz SRD band). It supports the routing of mode R2, but the routing of mode S and T is not supported. The main use of this standard is to support routed wireless networks for the readout of meters.

Communication systems for meters and remote reading of meters - Part 5:Wireless relaying

DIN IEC/TS 60870-5-601:2009 遥控设备和系统 第5-601部分:IEC 60870-5-101配套标准的一致性试验案例

Telecontrol equipment and systems - Part 5-601: Conformance test cases for the IEC 60870-5-101 companion standard (IEC/TS 60870-5-601:2006)

BS EN 60870-5-6:2009 遥控设备和系统.第5-6部分:与EN 60870-5配套标准的一致性试验指南

This part of the IEC 60870-5 series specifies methods for conformance testing of telecontrol equipment, amongst Substation Automation Systems (SAS) and telecontrol systems, including front-end functions of SCADA. The use of this part of IEC 60870-5 facilitates interoperability by providing a standard method of testing protocol implementations, but it does not guarantee interoperability of devices. It is expected that using this part of IEC 60870-5 during testing will minimize the risk of noninteroperability. The goal of this part of IEC 60870-5 is to enable unambiguous and standardised evaluation of IEC 60870-5 companion standard protocol implementations. The guidelines and conditions for the testing environment are described in this part of IEC 60870-5. The detailed test cases per companion standard, containing among others mandatory and optional mandatory test cases per Basic Application Function, ASDU and transmission procedure, will become available as technical specifications (IEC 60870-5-60x). Other functionalities may need test cases, but this is beyond the scope of this part of IEC 60870-5. This part of IEC 60870-5 deals mainly with communication conformance testing; therefore other requirements, such as safety or EMC are not covered. These requirements are covered by other standards (if applicable) and the proof of compliance for these topics should be done according to those standards.

Telecontrol equipment and systems — Part 5-6: Guidelines for conformance testing for the EN 60870-5 companion standards

GJB 6555-2008 地面气象自动遥测设备通用规范

本规范规定了地面气象自动遥测设备（以下简称设备）的分类、技术要求和质量保证规定等。 本规范适用于地面气象自动遥测设备的设计、制造、检验和验收等。

General specification for automatic surface meteorological telemetry equipments