M54 遥控、遥测设备与系统 标准查询与下载

HJB 410-2008 ZJ-9C导弹指挥仪修理技术要求

本标准规定了ZJ-9C导弹指挥仪（以下简称指挥仪）的修理范围、修理质量要求和检验验收要求及方法。 本标准适用于指挥仪修理和验收。

Repairing technology requirement for ZJ-9C missile fire control system

HJB 409-2008 ZJ-6E导弹指挥仪修理技术要求

本标准规定了ZJ-6E导弹指挥仪（以下简称指挥仪）的修理范围、修理质量要求和检验验收要求及方法。 本标准适用于指挥仪的修理和验收。

Repairing technology requirement for ZJ-6E missile fire control system

KS C IEC 60870-5-6:2007 遥控设备和系统.第5-6部分:IEC 60870-5配套标准的合格检验指南

이 규격은 SCADA의 전단 기능들을 포함한 부지점 자동화 시스템들(SAS) 및 원격제어

Telecontrol equipment and systems－Part 5－6：Guidelines for conformance testing for the IEC 60870－5 companion standards

KS C IEC 60870-6-601:2007 远动设备和系统.第6部分:与ISO标准和ITU-T建议兼容的远动规约.第601节:在通过永久性接入与分组交换数据网定向连接的终端系统中提供定向传送服务的功能性协议子集

이 기능 프로필(FP)은 패킷 자료 교환망(PSDN)에 접근하기 위하여 영구 아날로그 또는

Telecontrol equipment and systems－Part 6：Telecontrol protocols compatible with ISO standards and ITU－T recommendations－Section 601：Functional Profile for providing the Connection-Oriented Transport Service in an End System connected via permanent access t

KS C IEC 60870-5-104:2007 遥控设备和系统.第5-104部分:传输协议.使用标准传输轮廓的KS C IEC 60870-5-101所列标准的网络存取

이 규격은 지형적으로 광범위한 프로세스의 감시와 제어를 위한 암호화된 비트 직렬 데이터 전

Telecontrol equipment and systems－Part 5－104：Transmission protocols－Network access for KS C IEC 60870－5－101 using standard transport profiles

BS DD IEC/TS 60870-5-604:2007 远程控制设备和系统.IEC 60870-5-104配套标准的合格性试验案例

Telecontrol equipment and systems - Conformance test cases for the IEC 60870-5-104 companion standard

IEC TS 60870-5-604:2007 远程控制设备和系统.第5-604部分:IEC60870-5-104配套标准的合格性试验案例

This technical specification which is part of the IEC 60870-5 series describes test cases for conformance testing of telecontrol equipment, Substation Automation Systems [SAS] and telecontrol systems, including front-end functions of SCADA. The use of this part of IEC 60870 facilitates interoperability by providing a standard method of testing protocol implementations, but it does not guarantee interoperability of devices. It is expected that using this specification during testing will minimize the risk of noninteroperability. The goal of this part of IEC 60870 is to enable unambiguous and standardised evaluation of IEC 60870-5 companion standard protocol implementations. The guidelines and conditions for the testing environment are described in IEC 60870-5-6. The detailed test cases per companion standard, containing among others mandatory and optional mandatory test cases per Basic Application Function, ASDU and transmission procedure, will become available as a technical specification (TS). Other functionality may need additional test cases but this is outside the scope of this part of IEC 60870. For proper testing, it is recommended to define these additional test cases. This document is such a Technical Specification for the mentioned companion standard. This part of IEC 60870 deals mainly with communication conformance testing; therefore other requirements, such as safety or EMC are not covered. These requirements are covered by other standards (if applicable) and the proof of compliance for these topics is done according to these standards.

Telecontrol equipment and systems - Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard

ANSI/NBFAA SRSS-01-2007 遥控监示站标准

hese requirements apply to Remote Supervising Stations providing fire-alarm, and supervisory services as described in the National Fire Alarm Code, NFPA 72. These requirements apply to remote stations, that are intended to be located in buildings constructed in accordance with building codes. The requirements for software and hardware, and the installation and operation of an automation system in a remote station are covered by the requirements for automation systems, UL 1981, or by the standards for Control Units for Fire-Protective Signaling Systems, UL 864. A reference made to "supervising station" refers to a remote station. These requirements do not cover the communication channel between the protected property and the station. This includes: a) The company that provides the communication channel and b) The equipment that is used to provide the communication channel. Exception No. 1: If the communication channel is owned and operated by the station, these requirements do apply.

Standard for Remote Supervising Station

BS EN 60870-5-104:2006 遥控设备和系统.传输协议.使用标准传输协议的IEC 60870-5-101的网络通路

This part of IEC 60870 applies to telecontrol equipment and systems with coded bit serial data transmission for monitoring and controlling geographically widespread processes. It defines a telecontrol companion standard that enables interoperability among compatible telecontrol equipment. The defined telecontrol companion standard utilizes standards of the IEC 60870-5 series. The specifications of this part present a combination of the application layer of IEC 60870-5-101 and the transport functions provided by a TCP/IP (Transmission Control Protocol/Internet Protocol). Within TCP/IP, various network types can be utilized, including X.25, FR (Frame Relay), ATM (Asynchronous Transfer Mode) and ISDN (Integrated Service Data Network). Using the same definitions, alternative ASDUs (Application Service Data Unit) as specified in other IEC 60870-5 companion standards (for example, IEC 60870-5-102) may be combined with TCP/IP, but this is not described further in this part. NOTE Security mechanisms are outside the scope of this standard.

Telecontrol equipment and systems - Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles

GJB 21.1B-2006 遥测标准 第1部分：无线电信道

本部分规定了军用遥测系统的无线电频段，同时规定了发射机和接收机的一些与信道相关的技术要求。 本部分适用于军用及民用航天遥测系统的研制和生产。含有此类遥测功能的测控系统也可参照使用。

Telemetry standards Part 1: Radio channel

GJB 383.4A-2006 遥测系统及分系统测试方法 第4部分：遥测发射机测试方法

本部分规定了遥测发射机的测试项目、测试设备、测试条件和测试方法。 本部分适用于军用及民用航天遥测系统的遥测发射机性能指标的测试，可作为GJB 21.1国家军用遥测标准的配套文件。其它同类民用遥测发射机也可参照使用。

Test methods for telemetry systems and subsystems Part 4:Test method for telemetry transmitters

IEC TR 60870-6-505:2006 远程控制设备和系统.第6-505部分:与ISO标准和ITU-T建议兼容的远程控制协议.TASE.2 用户指南

This is Amendment 1 to IEC/TR 60977-2000 (Medical electrical equipment - Medical electron accelerators in the range 1 MeV to 50 MeV -Guidelines for functional performance characteristics )

Telecontrol equipment and systems - Part 6-505: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 User guide

BS DD IEC/TS 60870-5-601:2006 遥控设备和系统.IEC 60870-5-101配套标准的一致性试验案例

This part of the IEC 60870-5 series describes test cases for conformance testing of telecontrol equipment, Substation Automation Systems (SAS) and telecontrol systems, including front-end functions of SCADA. The use of this part of IEC 60870 facilitates interoperability by providing a standard method of testing protocol implementations, but it does not guarantee interoperability of devices. It is expected that using this part of IEC 60870 during testing will minimize the risk of noninteroperability. The goal of this part of IEC 60870 is to enable unambiguous and standardised evaluation of IEC 60870-5 companion standard protocol implementations. The guidelines and conditions for the testing environment are described in IEC 60870-5-6. The detailed test cases per companion standard, containing among others mandatory and optional mandatory test cases per Basic Application Function, ASDU and transmission procedures, will become available as a technical specification (TS). Other functionality may need additional test cases but this is beyond the scope of this part of IEC 60870. For proper testing, it is recommended to define these additional test cases. This part of IEC 60870 deals mainly with communication conformance testing; therefore other requirements, such as safety or EMC are not covered. These requirements are covered by other standards (if applicable) and the proof of compliance for these topics is done in accordance with these standards.

Telecontrol equipment and systems - Conformance test cases for the IEC 60870-5-101 companion standard

YDN 140-2006 网络入侵检测系统技术要求

本标准规定了网络入侵检测系统的系统结构、检测内容、响应方式、系统管理、日志审计、自身安全、性能指标和物理安全。 本标准适用于网络入侵检测系统及相关设备。

Technical requirement for network intrusion detection system

IEC TS 60870-5-601:2006 遥控设备和系统.第5-601部分:IEC 60870-5-101配套标准的一致性测试用例

This part of the IEC 60870-5 series describes test cases for conformance testing of telecontrol equipment, Substation Automation Systems (SAS) and telecontrol systems, including front-end functions of SCADA. The use of this part of IEC 60870 facilitates interoperability by providing a standard method of testing protocol implementations, but it does not guarantee interoperability of devices. It is expected that using this part of IEC 60870 during testing will minimize the risk of noninteroperability. The goal of this part of IEC 60870 is to enable unambiguous and standardised evaluation of IEC 60870-5 companion standard protocol implementations. The guidelines and conditions for the testing environment are described in IEC 60870-5-6. The detailed test cases per companion standard, containing among others mandatory and optional mandatory test cases per Basic Application Function, ASDU and transmission procedures, will become available as a technical specification (TS). Other functionality may need additional test cases but this is beyond the scope of this part of IEC 60870. For proper testing, it is recommended to define these additional test cases. This part of IEC 60870 deals mainly with communication conformance testing; therefore other requirements, such as safety or EMC are not covered. These requirements are covered by other standards (if applicable) and the proof of compliance for these topics is done in accordance with these standards.

Telecontrol equipment and systems - Part 5-601: Conformance test cases for the IEC 60870-5-101 companion standard

IEC 60870-5-104:2006 遥控设备和系统.第5-104部分:传输协议.使用标准传输轮廓的IEC 60870-5-101所列标准的网络存取

This part of IEC 60870 applies to telecontrol equipment and systems with coded bit serial data transmission for monitoring and controlling geographically widespread processes. It defines a telecontrol companion standard that enables interoperability among compatible telecontrol equipment. The defined telecontrol companion standard utilizes standards of the IEC 60870-5 series. The specifications of this part present a combination of the application layer of IEC 60870-5-101 and the transport functions provided by a TCP/IP (Transmission Control Protocol/Internet Protocol). Within TCP/IP, various network types can be utilized, including X.25, FR (Frame Relay), ATM (Asynchronous Transfer Mode) and ISDN (Integrated Service Data Network). Using the same definitions, alternative ASDUs (Application Service Data Unit) as specified in other IEC 60870-5 companion standards (for example, IEC 60870-5-102) may be combined with TCP/IP, but this is not described further in this part. NOTE Security mechanisms are outside the scope of this standard.

Telecontrol equipment and systems - Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles

DIN EN 60870-6-802/A1:2006 遥控设备和系统.第6-802部分:与ISO标准和ITU-T推荐标准相一致的远程控制协议.TASE.2目标模式(IEC 60870-6-802-2002/A1-2005)

Proposes object models from which to define object instances and which represents objects for transfer through wide- and local-area networks by means of a Telecontrol Application Service Element No. 2 (TASE.2). Annex B specifies a method of exchanging information regarding tag and expected changes.

Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models (IEC 60870-6-802:2002/A1:2005); German version EN 60870-6-802:2002/A1:2005, text in English

IEC 60870-5-6:2006 遥控设备和系统.第5-6部分:IEC 60870-5 配套标准的合格检验指南

This part of the IEC 60870-5 series specifies methods for conformance testing of telecontrol equipment, amongst Substation Automation Systems (SAS) and telecontrol systems, including front-end functions of SCADA. The use of this part of IEC 60870-5 facilitates interoperability by providing a standard method of testing protocol implementations, but it does not guarantee interoperability of devices. It is expected that using this part of IEC 60870-5 during testing will minimize the risk of non-interoperability. The goal of this part of IEC 60870-5 is to enable unambiguous and standardised evaluation of IEC 60870-5 companion standard protocol implementations. The guidelines and conditions for the testing environment are described in this part of IEC 60870-5. The detailed test cases per companion standard, containing among others mandatory and optional mandatory test cases per Basic Application Function, ASDU and transmission procedure, will become available as technical specifications (IEC 60870-5-60x). Other functionalities may need test cases, but this is beyond the scope of this part of IEC 60870-5. This part of IEC 60870-5 deals mainly with communication conformance testing; therefore other requirements, such as safety or EMC are not covered. These requirements are covered by other standards (if applicable) and the proof of compliance for these topics should be done according to those standards.

Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards

BS EN 60870-6-501:1996 遥控设备和系统.第6部分:符合ISO标准和ITU-T推荐标准的遥控协议.第501节:TASE.1服务定义

This section of IEC 870-6 defines the services provided by a telecontrol specific applicationservice- element – the Telecontrol Application Service Element No. 1 (TASE.1) – for the exchange of process data in telecontrol systems. The main goals for the design of these services are:

Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 501: TASE.1 Service definitions

DD CLC/TS 61970-2-2005 能源管理系统应用程序接口（EMS-API）第2部分：术语表

This Technical specification provides a glossary for the volume of work produced as part of the IEC 61970 series of documents. Terms and abbreviations that are either specific to the series, or that require explanation because of the way that they are used in it, are supplied.

Energy management system application program interface (EMS-API) — Part 2: Glossary