M54 遥控、遥测设备与系统 标准查询与下载

IEC 60870-6-505/AMD1:2005 远程控制设备和系统.第6-505部分:与ISO标准和ITU-T推荐标准相一致的远程控制协议.TASE.2用户指南.修改件1

This standard is Telecontrol equipment and systems - Part 6-505: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 User guide; Amendment 1.

Telecontrol equipment and systems - Part 6-505: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 User guide; Amendment 1

IEC 60870-6-802:2005 远程控制设备和系统.第6-802部分:与ISO标准和ITU-T推荐标准相一致的远程控制协议.TASE.2对象模型

This part of IEC 60870 specifies a method of exchanging time-critical control centre data through wide-area and local-area networks using a full ISO compliant protocol stack. It contains provisions for supporting both centralized and distributed architectures. The standard includes the exchange of real-time data indications, control operations, time series data, scheduling and accounting information, remote program control and event notification.

Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models

IEC 60870-6-802:2002/AMD1:2005 修改件1.远动设备和系统.第6-802部分:与ISO标准和ITU-T建议兼容的远动协议.TASE.2对象模型

This is Amendment 6 to IEC 60870-6-802-2002 (Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models)

Amendment 1 - Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models

DLA QPL-83383-16-2005 热自由线路遥控操作断路器一般规格

This list has been prepared for use by or for the Government in the procurement of products covered by Specification MIL-PRF-83383. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

CIRCUIT BREAKERS, REMOTE CONTROL, THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR

ETSI EN 300 718-3-2004 电磁兼容性和无线频谱事务(ERM).雪崩信标.收发系统.第3部分:包含导则R&TTE中条款3.3e的基本要求的欧洲协调标准(版本1.2.1)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering essential requirements of article 3.3e of the R&TTE Directive (V1.2.1)

SJ 20885-2003 GPS探空系统通用规范

General specification for GPS radiosonde system

DIN EN 60870-5-101:2003 远动设备和系统.第5-101部分:传输协议.基本远动任务的配套标准

Telecontrol equipment and systems - Part 5-101: Transmission protocols; Companion standard for basic telecontrol tasks (IEC 60870-5-101:2003); German version EN 60870-5-101:2003

BS EN 60870-5-101:2003 远动设备和系统.传输协议.基本远动任务的配套标准

This part of IEC 60870-5 applies to telecontrol equipment and systems with coded bit serial data transmission for monitoring and controlling geographically widespread processes. It defines a telecontrol companion standard that enables interoperability among compatible telecontrol equipment. The defined telecontrol companion standard utilizes standards of the IEC 60870-5 series of documents. The specifications of this standard present a functional profile for basic telecontrol tasks. Further companion standards, based on the IEC 60870-5 series are under consideration. This standard defines ASDUs with time tags CP24Time2a which includes three octets binary time from milliseconds to minutes. In addition to these specifications, ASDUs with time tags CP56Time2a, which includes seven octets binary time from milliseconds to years, are defined in this standard (see 6.8 of IEC 60870-5-4 and 7.2.6.18 of this standard). ASDUs with time tags CP56Time2a are used when the controlling station is not able to add the time from hours to years unambiguously to the received ASDUs which are tagged from milliseconds to minutes. This may happen when using networks with uncertain transmission delays or if temporary failure of a network occurs. Although this companion standard defines the most important user functions, other than the actual communication functions, it cannot guarantee complete compatibility and interoperability between equipment of different vendors. An additional mutual agreement is normally required between concerned parties regarding the methods of use of the defined communication functions, taking into account the operation of the entire telecontrol equipment. Standards specified in this standard are compatible with standards defined in IEC 60870-5-1 to IEC 60870-5-5 (see Clause 2).

Telecontrol equipment and systems - Transmission protocols - Companion standard for basic telecontrol tasks

ISO 14223-1:2003 动物的射频识别.高级应答机.第1部分:空中接口

This part of ISO 14223 specifies the air interface between the transceiver and the advanced transponder used in the radiofrequency identification of animals, this specification being fully backwards-compatible with those of ISO 11784 and ISO 11785. As a direct extension of ISO 11785, it is to be used in conjunction with that International Standard. Transponders are in conformance with this part of ISO 14223 provided they meet the requirements of Clause 5 and of Clause 6 or 7 or 8. Transceivers are in conformance provided they meet the requirements of Clauses 5, 6, 7 and 8.

Radiofrequency identification of animals - Advanced transponders - Part 1: Air interface

EN 60870-5-101:2003 遥控设备和系统.第5-101部分:传输协议.遥控作业的配套标准 IEC 60870-5-101-2003

This part of IEC 60870-5 applies to telecontrol equipment and systems with coded bit serial data transmission for monitoring and controlling geographically widespread processes. It defines a telecontrol companion standard that enables interoperability among compatible telecontrol equipment. The defined telecontrol companion standard utilizes standards of the IEC 60870-5 series of documents. The specifications of this standard present a functional profile for basic telecontrol tasks. Further companion standards, based on the IEC 60870-5 series are under consideration. This standard defines ASDUs with time tags CP24Time2a which includes three octets binary time from milliseconds to minutes. In addition to these specifications, ASDUs with time tags CP56Time2a, which includes seven octets binary time from milliseconds to years, are defined in this standard (see 6.8 of IEC 60870-5-4 and 7.2.6.18 of this standard). ASDUs with time tags CP56Time2a are used when the controlling station is not able to add the time from hours to years unambiguously to the received ASDUs which are tagged from milliseconds to minutes. This may happen when using networks with uncertain transmission delays or if temporary failure of a network occurs. Although this companion standard defines the most important user functions, other than the actual communication functions, it cannot guarantee complete compatibility and interoperability between equipment of different vendors. An additional mutual agreement is normally required between concerned parties regarding the methods of use of the defined communication functions, taking into account the operation of the entire telecontrol equipment. Standards specified in this standard are compatible with standards defined in IEC 60870-5-1 to IEC 60870-5-5 (see Clause 2).

Telecontrol equipment and systems Part 5-101: Transmission protocols �C Companion standard for basic telecontrol tasks (Incorporates Amendment A1: 2016)

JIS B 0186:2003 移动式机器人.词汇

この規格は，移動ロボットに関して用いる主な用語及び定義について規定する。備考 移動ロボットとは，移動環境に適合した移動手段を備え，自動的に移動することができるロボットである。

Mobile robots -- Vocabulary

IEC 60870-5-101:2003 远动设备和系统.第5-101部分:传输协议.基本远动任务的配套标准

This part of IEC 60870-5 applies to telecontrol equipment and systems with coded bit serial data transmission for monitoring and controlling geographically widespread processes. It defines a telecontrol companion standard that enables interoperability among compatible telecontrol equipment. The defined telecontrol companion standard utilizes standards of the IEC 60870-5 series of documents. The specifications of this standard present a functional profile for basic telecontrol tasks. Further companion standards, based on the IEC 60870-5 series are under consideration. This standard defines ASDUs with time tags CP24Time2a which includes three octets binary time from milliseconds to minutes. In addition to these specifications, ASDUs with time tags CP56Time2a, which includes seven octets binary time from milliseconds to years, are defined in this standard (see 6.8 of IEC 60870-5-4 and 7.2.6.18 of this standard). ASDUs with time tags CP56Time2a are used when the controlling station is not able to add the time from hours to years unambiguously to the received ASDUs which are tagged from milliseconds to minutes. This may happen when using networks with uncertain transmission delays or if temporary failure of a network occurs. Although this companion standard defines the most important user functions, other than the actual communication functions, it cannot guarantee complete compatibility and interoperability between equipment of different vendors. An additional mutual agreement is normally required between concerned parties regarding the methods of use of the defined communication functions, taking into account the operation of the entire telecontrol equipment. Standards specified in this standard are compatible with standards defined in IEC 60870-5-1 to IEC 60870-5-5 (see Clause 2).

Telecontrol equipment and systems - Part 5-101: Transmission protocols; Companion standard for basic telecontrol tasks

DIN EN 60870-6-503:2003 远程控制设备和系统.第6-503部分:与 ISO 标准和 ITU-T 推荐标准相一致的远程控制协议.TASE.2 服务和协议 (IEC 60870-6-503:2002); 德文版本 EN 60870-6-503:2002、英文文本

The document specifies a method of exchanging time-critical control center data through wide- and local-area networks using a full ISO compliant protocol stack, by means of the Telecontrol Application Service Element No. 2 (TASE.2). It contains provisions for supporting both centralized and distributed architectures. The standard includes the exchange of real-time data indications, control operations, time series data, scheduling and accounting information, remote program control, and event notification.

Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations; TASE.2 services and protocol (IEC 60870-6-503:2002); German version EN 60870-6-503:2002, text in English

DIN EN 60870-6-802:2003 远程控制设备和系统.第6-802部分:与 ISO 标准和 ITU-T 推荐标准相一致的远程控制协议.TASE.2 目标模式 (IEC 60870-6-802-2002); 德文版本 EN 60870-6-802-2002、英文文本

The document proposes object models from which to define object instances and which represents objects for transfer through wide- and local-area networks by means of a Telecontrol Application Service Element No. 2 (TASE.2).

Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations; TASE.2 object models (IEC 60870-6-802:2002); German version EN 60870-6-802:2002, text in English

BS EN 60870-6-802:2002 遥测设备和系统.符合ISO标准和ITU-T推荐标准的远程控制协议.TASE.2目标模式

Telecontrol equipment and systems - Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models

BS EN 60870-6-503:2002 遥测设备和系统.符合ISO标准和ITU-T推荐标准的远程控制协议.TASE.2服务和协议

Telecontrol equipment and systems - Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocol

IEC 60870-6-802:2002 远程控制设备和系统.第6-802部分:与ISO标准和ITU-T推荐标准相一致的远程控制协议.TASE.2目标模式

Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations; TASE.2 Object models

BS DD IEC TS 60870-6-602:2002 遥控设备和系统.与ISO标准和ITU-T推荐规范兼容的遥控协议.TASE传输配置文件

Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. TASE transport profiles

PD IEC TR 60870-1-5:2002 远程控制设备和系统.一般技术条件.带有扰码器的调制解调器传输程序对使用协议IEC 60870-5 的传输系统的数据完整性的影响

Telecontrol equipment and systems - General considerations - Influence of modem transmission procedures with scramblers on the data integrity of transmission systems using the protocol IEC 60870-5

BS EN 60870-5-104:2001 遥控设备和系统.传输协议.使用标准传输概要的IEC 60870-5-101的网络存取

This part of IEC 60870 applies to telecontrol equipment and systems with coded bit serial data transmission for monitoring and controlling geographically widespread processes. It defines a telecontrol companion standard that enables interoperability among compatible telecontrol equipment. The defined telecontrol companion standard utilizes standards of the IEC 60870-5 series. The specifications of this part present a combination of the application layer of IEC 60870-5-101 and the transport functions provided by a TCP/IP (Transmission Control Protocol/Internet Protocol). Within TCP/IP, various network types can be utilized, including X.25, FR (Frame Relay), ATM (Asynchronous Transfer Mode) and ISDN (Integrated Service Data Network). Using the same definitions, alternative ASDUs (Application Service Data Unit) as specified in other IEC 60870-5 companion standards (for example, IEC 60870-5-102) may be combined with TCP/IP, but this is not described further in this part.NOTE Security mechanisms are outside the scope of this standard.

Telecontrol equipment and systems - Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles