N13 机械量仪表、自动秤重装置与其他检测仪表 标准查询与下载

JJG 139-2014 拉力、压力和万能试验机检定规程

本规程适用于拉力、压力和万能试验机(以下简称试验机)的首次检定、后续检定和使用中检查。

Tension, Compression and Universal Testing Machines

QB/T 4770-2014 科里奥利粉体定量给料秤

本标准规定了科里奥利粉体定量给料秤的术语和定义、产品型号、计量性能、要求、试验方法、检验规则及标志、包装、运输和贮存。本标准适用于根据质点在均匀转动参照系中作相对运动时受到科里奥利力作用的力学原理,通过测量物料受到的科里奥利力的量值来获得物料的真正瞬时质量流量,通过连续的计量方式,确定并累计固体散状物料质量的科里奥利粉体定量给料秤(以下简称“科里奥利秤”)。

Coriolis constant feed weigher for powder

JB/T 11536.2-2013 电子称量斗 第2部分：技术条件

Electronic Weighing Hoppers Part 2: Specifications

DIN EN ISO 25178-70:2014 几何产品技术规格(GPS). 表面结构: 平面式. 第70部分: 材料测量(ISO 25178-70-2014); 德文版本EN ISO 25178-70-2014

Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014); German version EN ISO 25178-70:2014

DIN EN ISO 25178-605:2014 几何产品技术规格(GPS). 表面结构: 平面式. 第605部分: 非接触式(连贯性扫描干涉法)仪器的标称特性(ISO 25178-605-2014); 德文版本EN ISO 25178-605-2014

Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014); German version EN ISO 25178-605:2014

JB/T 7814-2014 频率信号输出型转速传感器性能评定方法

本标准规定了频率信号输出型转速传感器性能评定的试验方法和评定报告的内容。 本标准适用于在一般条件下测量转速，输出为频率信号的转速传感器（以下简称传感器）。

Methods of evaluating the performance of rotational velocity transducer with frequency output

JB/T 5221-2014 接触式手持数字转速表

本标准规定了接触式手持数字转速表（以下简称转速表）的产品分类、基本参数、技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于短期测量转速用的转速表。

Digital hand-held contact tachometer

JB/T 871-2014 模拟指示式转速表

本标准规定了模拟指示式转速表（以下简称转速表）的术语和定义、产品分类与基本参数、技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于离心式、电动式、磁感应式、磁性式（定时式）等转速表。

Analog indicating tachometer

JB/T 5220-2014 转速数字显示仪

本标准规定了转速数字显示仪（以下简称显示仪）的产品分类、基本参数、技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于输入为频率量的显示仪。

Digital rotation rate display

ASME MFC-16-2014 用电磁流量计在密封管中对液体流量的测量

This Standard is applicable to industrial electromagnetic flowmeters and their application in the measurement of liquid flow. The electromagnetic flowmeters covered by this Standard utilize an alternating electrical current (AC) or pulsed direct-current (pulsed-DC) to generate a magnetic field in electrically conductive and electrically-homogeneous liquids or slurries flowing in a completely filled, closed conduit. This Standard does not cover: Insertion-type electromagnetic flowmeters Electromagnetic flowmeters used in surgical, therapeutic, or other health and medical applications Applications of industrial flowmeters involving nonconductive liquids Highly conductive liquids (e.g., liquid metals)

Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters

BS EN ISO 10360-9:2013 产品几何技术规范(GPS).坐标测量机(CMM)的验收和重新验证试验.带多个探测系统的CMMs

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). CMMs with multiple probing systems

JB/T 11536.1-2013 电子称量斗 第1部分：型式与基本参数

JB/丁ll536的本部分规定了电子称黾斗的吧式与基本寥数。 ′部分适用 」′^铸造厂冲夭炉配料使用的电于称昌斗。

Electronic Weighing Hopper Part 1: Types and Basic Parameters

BS EN ISO 10360-8:2013 几何产品技术规范 (GPS). 坐标测量系统 (CMS) 的验收试验和复检试验. 带光学距离传感器的坐标测量系统 (CMS)

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). CMMs with optical distance sensors

KS Q ISO 11843-7:2013 检测能力.第7部分:基于仪器噪声随机性的方法学

배경 잡음은 시료의 장비 적용 여부와 상관 없이 분석 장비에 편재한다. 이 표준은 측정 불확도의가장 지배적인 출처가 배경 잡음인 경우 최소 탐지 가능치 추정을 위한 수학적 방법론과 관련된다.검출가능최소값은 직접적 또한 수학적으로 배경 잡음의 추측 통계학적 특징에서 유도한다.다음을 위한 기본적인 방법을 명시한다.― 배경 잡음의 추측 통계학적 속성 추출― 반응 변수의 표준편차(SD) 또는 변동계수(CV) 추정을 위한 추측 통계학적 속성 사용― 위에서 구한 SD 또는 CV에 기초한 검출가능최소값 계산이 표준에서 설명하는 방법은 측정 불확도를 일으키는 원인이 장비 출력의 배경 잡음이 다른 요소보다 지배적인 다양한 유형의 측정 장비로 특정 본질의 탐지를 확인하는 데 유용하다. 실행 가능한 방식으로 가시 및 자외선 흡수 분광법, 원자 흡수 분광법, 원자 형광 분광법, 르미네센스 분광법, 액체크로마토그래피, 기체 크로마토그래피를 선택한다.

Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise

JJG 610-2013 A型巴氏硬度计

本规程适用于A型巴氏硬度计的首次检定、后续检定和使用中检查。

Type A Barcol Hardness Testers

DB37/T 2418-2013 电子式路面材料强度测试仪

本标准规定了电子式路面材料强度测试仪的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适于山东省生产的电子式路面材料强度测试仪（以下简称测试仪）。

Electronic pavement material strength tester

JIS B 7440-2:2013 几何产品技术规范(GPS).坐标测量机(CMMs)的验收和再验证试验.第2部分:尺寸测量用坐标测量机

This Standard specifies the acceptance tests for verifying the performance of a coordinate measuring machine (CMM) used for measuring linear dimensions as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the CMM.

Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring linear dimensions

JIS B 7440-5:2013 几何产品技术规范(GPS).坐标测量机(CMM)的验收和复检试验.第5部分:使用多针测试系统的坐标测量机(CMMs)

This Standard specifies acceptance and periodic reverification tests of CMM performance with contacting probing systems and is only applicable to CMMs using —any type of contacting probing system, —a discrete point probing mode, and —spherical or hemispherical stylus tip(s).

Geometrical product specifications (GPS).Acceptance and reverification tests for coordinate measuring machines (CMM).Part 5: CMMs using single and multiple stylus contacting probing systems

ISO 25178-603:2013 产品几何技术规范(GPS) 表面纹理 平面 第603部分 非接触(相移干涉计的显微检查)仪器标称特征

This part of ISO 25178 describes the metrological characteristics of phase-shifting interferometric (PSI) profile and areal surface texture measuring microscopes.

Geometrical product specifications (GPS).Surface texture: Areal.Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments

JIS B 7616:2013 压力秤操作和校准规程

Operation and calibration procedures of pressure balances