P12 工程水文 标准查询与下载

ISO 9826:1992 明渠水流测量 巴歇尔槽和孙奈利槽

Specifies methods of liquid flow measurement in open channels (particularly in irrigation canals) under steady or slowly varying flow conditions. The flumes used are designed to operate under both free-flow and submergence conditions.

Measurement of liquid flow in open channels; Parshall and SANIIRI flumes

ISO 4362:1992 明渠液体流量测量.梯形拦河堰

Measurement of liquid flow in open channels; trapezoidal profile weirs

BS 3680-4E:1990 明渠流量测量.第4部分:溢流堰和斜槽.第4E节:矩形宽顶堰

Measurement of flow of clean water under free flow conditions. Covers installation conditions, maintenance, head measurement, discharge, relationships, computation of discharge and errors in flow measurement.

Methods of measurement of liquid flow in open channels - Weirs and flumes - Rectangular broad-crested weirs

BS 3680-3M:1990 明渠流量测量.第3部分:河川流量测量.第3M节:大流量测定方法指南

Guidance on the applicability and extension for use of existing methods of discharge measurement under conditions of high discharge. Site selection under those conditions is also considered.

Measurement of liquid flow in open channels - Stream flow measurement - Guide to the methods of measuring high discharges in rivers

BS 3680-8A:1989 明渠流量测量.第8部分:测量仪器和设备.第8A节:转子式流速计

Operational requirements, construction, calibration and maintenance of rotating element devices.

Measurement of liquid flow in open channels - Measuring instruments and equipment - Current meters incorporating a rotating element

ISO/TR 9209:1989 明渠水流测量 湿绳改正的确定

This Technical Report provides an alternative to the procedure given in ISO 748 : 1979, annex C, for the determination of the wetline correction.

Measurement of liquid flow in open channels; determination of the wetline correction

ISO/TR 9123:1986 明渠水流测量.水位-落差-流量的关系

Liquid flow measurements in open channels; Stage-fall-discharge relations

ISO 8363:1986 明渠液体流量测量.选择测量方法的一般指南

Liquid flow measurement in open channels; General guidelines for the selection of methods

BS 3680-4I:1986 明渠中液体流量的测量方法 堰和水槽 V型宽顶堰

Method for the measurement of subcritical flow in small rivers and articifial channels.

Methods of measurement of liquid flow in open channels. Weirs and flumes. V-shaped broad crested weirs

BS 3680-4B:1986 明渠流量测量.第4部分:溢流堰和斜槽.第4B节:三角形剖面堰

Methods for steady flow conditions. Examples are given on the computation of flow rate and associated uncertainty for modular and drowned flow conditions.

Methods of measurement of liquid flow in open channels - Weirs and flumes - Triangular profile weirs

BS 3680-3F:1986 明渠流量测量.第3部分:河川流量测量.第3F部分:确定测量误差用数据的收集和处理

Gives a standard basis for the determination of individual components of the total error for velocity area methods.

Measurement of liquid flow in open channels - Stream flow measurement - Collection and processing of data for determination of errors in measurement

ISO 8333:1985 堰、槽明渠水流测量 V形宽顶堰

Specifies a method for the measurement of subcritical flow in small rivers and artificial channels using V-shaped broad-crested weirs. Covers also selection of site and installation conditions, measurement of head, discharge equations and errors in flow measurement and contains three annexes.

Liquid flow measurement in open channels by weirs and flumes; V-shaped broad-crested weirs

ISO 8368:1985 明渠液体流量测量.液流测量设施选择指南

Liquid flow measurement in open channels; Guidelines for the selection of flow gauging structures

ISO 4365:1985 明渠水流 河、河渠泥沙 含沙量、颗粒级配和相对密度的测定

Liquid flow in open channels; Sediment in streams and canals; Determination of concentration, particle size distribution and relative density

ISO 4360:1984 堰、槽明渠水流测量 三角形剖面堰

Specifies methods for the measurement of the flow of water in open channels under steady flow conditions using triangular profile weirs. The flow conditions considered are steady flows which are uniquely dependent on the upstream head and drowned flows which depend on downstream as well as upstream levels.

Liquid flow measurement in open channels by weirs and flumes; Triangular profile weirs

ISO 6420:1984 明渠水流测量 水文测船定位设备

Specifies methods of determining the position of hydrometric boats with respect to known points on the banks of rivers or estuaries. Applies to conventional surveying techniques and, in recognition of the availability of more sophisticated equipment, describes the principles of operation of currently available electronic positioning equipment.

Liquid flow measurement in open channels; Position fixing equipment for hydrometric boats

ISO 6419-1:1984 水文测量数据传输系统.第1部分:总则

Hydrometric data transmission systems; Part 1 : General

ISO 4371:1984 堰、槽明渠水流测量 在非矩形渠道上对自由溢流量估算的末端测深法(近似法)

Specifies a method for the estimation of subcritical flow of clear water in smooth, essentially horizontal, straight open channels with a vertical drop and discharging freely. Gentle positive slopes not greater than 1 in 2000 are admissible. Covers channels with the following types of cross-section, the nappe being confined: a) trapezoidal; b) triangular; c) parabolic; d) circular.

Measurement of liquid flow in open channels by weirs and flumes; End depth method for estimation of flow in non-rectangular channels with a free overfall (approximate method)

ISO/TR 7178:1983 明渠水流测量 速度-面积法 总误差的研究

Summarizes the results of investigations of the total error in measurements of flow by velocity-area methods. Describes the procedure used and types of errors (section one), and gives recommendation for the collection of data for investigations of errors (section two) with a view to supplementing the information given in ISO 1088.

Liquid flow measurement in open channels; Velocity-area methods; Investigation of total error

ISO 4359:1983 明渠水流测量 矩形、梯形和U形测流槽

Deals with the measurement of flow in rivers and artificial channels under steady or slowly varying flow conditions, using certain types of standing-wave (or critical depth) flumes. An annex gives the guidelines for the selection of weirs and flumes for the measurement of the discharge of water in open channels.

Liquid flow measurement in open channels; Rectangular, trapezoidal and U-shaped flumes