Q15 墙体材料 标准查询与下载

ASTM C34-12 结构粘土制承重墙砖的标准规格

1.1 This specification covers structural clay loading-bearing wall tile. 1.2 The property requirements of this specification apply at the time of purchase. The use of results from testing of tile extracted from masonry structures for determining conformance or non-conformance to the property requirements (Section 4) of this standard is beyond the scope of this specification. 1.3 Tile covered by this specification are manufactured from clay, shale, or similar naturally occurring substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment must develop sufficient fired bond between the particulate constituents to provide the strength and durability requirements of this specification. (See firing and fired bond in Terminology C1232.) 1.4 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Structural Clay Load-Bearing Wall Tile

ASTM C56-12 结构用粘土非承重砖的标准规格

1.1 This specification covers structural clay nonloadbearing tile (partition, fireproofing, and furring). 1.2 The property requirements of this specification apply at the time of purchase. The use of results from testing of tile extracted from masonry structures for determining conformance or non-conformance to the property requirements (Section 4) of this standard is beyond the scope of this specification. 1.3 Tile covered by this specification are manufactured from clay, shale, or similar naturally occurring substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment must develop sufficient fired bond between the particulate constituents to provide the strength and durability requirements of this specification. (See firing and fired bond in Terminology C1232.) 1.4 Fireproofing tile intended for use in load-bearing masonry shall conform to Specification C34. 1.5 Tile intended for use in fireproofing structural members shall be of such sizes and shapes that they can be erected to cover completely the exposed surfaces of the members. 1.6 The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this specification. 1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Structural Clay Nonloadbearing Tile

ASTM C652-12a 空心砖(粘土或页岩制空心砌块)的标准规格

1.1 This specification covers hollow building brick and hollow facing brick made from clay, shale, fire clay, or mixtures thereof, and fired to incipient fusion. Four types of hollow brick in each of two grades and two classes are covered. In this specification, the term hollow brick shall be understood to mean hollow clay masonry units whose net cross-sectional area (solid area) in any plane parallel to the surface, containing the cores, cells, or deep frogs, is less than 758201;% of its gross cross-sectional area measured in the same plane (see 4.3). This specification does not cover brick intended for use as paving brick (see Specification C902). 1.2 The property requirements of this specification apply at the time of purchase. The use of results from testing of brick extracted from masonry structures for determining conformance or nonconformance to the property requirements (Section 6) of this standard is beyond the scope of this specification. 1.3 Brick covered by this specification are ceramic products manufactured primarily from clay, shale, or similar naturally occurring substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment shall develop sufficient fired bond between the particulate constituents to provide the strength and durability requirements of this specification. Additives or recycled materials are permitted to be included at the option of the manufacturer. (See ???firing??? and ???firing bond??? in Terminology C1232.) 1.4 Hollow brick differ from unglazed structural clay tile (Specifications C34 and C212) and solid brick (Specifications C62 and C216). Hollow brick require greater shell and web thicknesses and higher minimum compressive strength than structural clay tile, but permit greater void area and lesser distance from exposed edge to core hole than solid brick. Therefore, environmental and structural performance may be different in elements constructed of hollow brick from those constructed of structural clay tile or solid brick. 1.5 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)

ASTM C1314-12 砌体棱镜抗压强度的标准试验方法

1.1 This test method covers procedures for masonry prism construction and testing, and procedures for determining the compressive strength of masonry, fmt, used to determine compliance with the specified compressive strength of masonry, f8201;???m. When this test method is used for research purposes, the construction and test procedures within serve as a guideline and provide control parameters. 1.2 This test method also covers procedures for determining the compressive strength of prisms obtained from field-removed masonry specimens. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Compressive Strength of Masonry Prisms

ASTM C530-12 结构用非承重粘土隔墙砖标准规格

1.1 This specification covers unglazed, structural clay, nonloadbearing screen tile. 1.2 The property requirements of this specification apply at the time of purchase. The use of results from testing of tile extracted from masonry structures for determining conformance or nonconformance to the property requirements (Section 4) of this specification is beyond the scope of this standard. 1.3 Tile covered by this specification are manufactured from clay, shale, or similar naturally occurring substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment must develop sufficient fired bond between the particulate constituents to provide the strength and durability requirements of this specification. (See firing and fired bond in Terminology C1232). 1.4 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Structural Clay Nonloadbearing Screen Tile

ASTM C279-12 耐化学腐蚀圬工构件标准规格

1.1 This specification covers solid, kiln fired brick and tile made from clay, shale, or mixtures thereof, suitable for indoor and outdoor use in masonry construction subjected to chemical environments (see Terminology C1232). 1.2 The physical and chemical properties of brick and tile differ from supplier to supplier, mainly because their composition is determined by the source of raw materials. Regardless of the differences, brick and tile are considered to be one of three types and one of two classes as follows: 1.2.1 Type I???For use where low absorption and high acid resistance are not major factors. 1.2.2 Type II???For use where lower absorption and higher acid resistance are required. 1.2.3 Type III???For use where minimum absorption and maximum acid resistance are required. Note 1???Types I, II, and III may not differ significantly in thermal shock resistance. The suitability of a given brick, for a particular application should be determined at the time of purchase by agreement between the purchaser and the supplier.Note 2???Types I and III were formerly designated Type ???H'' and ???L'' respectively. 1.2.4 Class S???For use in standard applications. 1.2.5 Class X???For use where a higher degree of precision and lower permissible variation in size than that permitted for Class S is required. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Chemical-Resistant Masonry Units

ASTM C1405-12 釉面砖(单烧、砖砌块)的标准规格

1.1 This specification covers brick, having a ceramic glaze finish fused to the body during the same process as the unit body firing, that are intended for use in masonry and supplying structural or facing components, or both, to the structure. This specification does not cover double-fired glazed brick. Some double-fired decorative glazes have physical properties which vary from those of single-fired glazes due to the lower temperatures used in applying the decorative coating. 1.2 The property requirements of this specification apply at the time of purchase. The use of results from testing of brick extracted from masonry structures for determining conformance or nonconformance to the property requirements of this specification is beyond the scope of this specification. 1.3 Glazed brick are prismatic units available in a variety of sizes, textures, colors, and shapes. Glazed brick are manufactured from clay, shale, or similar naturally occurring earthy substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment shall develop a fired bond between the particulate constituents to provide the strength and durability requirements of this specification (see Terminology C1232). 1.4 Glazed brick are shaped during manufacture by molding, pressing, or extrusion, and the shaping method is a way to describe the brick. 1.5 Glazed brick are classified into one of two grades, one of two types, one of two classes, and one of three divisions. 1.6 Opacity of the glaze is not required unless specified by the purchaser. 1.7 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard. 1.8 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Glazed Brick (Single Fired, Brick Units)

PD CEN/TS 16368:2011 轻质刨花板.规格

Lightweight Particleboards - Specifications

BS EN 771-2:2011 砌块规范.硅酸钙砌块

Specification for masonry units. Calcium silicate masonry units

JIS R 1250:2011 普通砖和面砖

Common bricks and facing bricks

BS EN 771-1:2011 圬工单位规范.粘土砌块

Specification for masonry units. Clay masonry units

BS EN 771-3:2011 砌块规范.集料混凝土砌块(密实和轻质集料)

Specification for masonry units. Aggregate concrete masonry units (dense and lightweight aggregates)

DB34/T 1499-2011 企口型混凝土腔发泡自保温砌块

本标准适用于工业与民用建筑用自保温砌块。

Foaming self-conserving concrete block with the concrete cavitye of match type

CECS 301-2011 乡村建筑内隔墙板应用技术规程

Technical specification for application of interior partition panels in rural buildings

NF P12-101-21*NF EN 772-21:2011 砌体装置试验方法.第21部分:利用冷水吸收法测定粘土及硅酸钙砌块的吸水性.

Methods of test for masonry units - Part 21 : determination of water absorption of clay and calcium silicate masonry units by cold water absorption.

NF P12-121-5:2011 砌筑块材规范.第5部分:加工的石料砌块.

Specification for masonry units - Part 5 : manufactured stone masonry units.

NF P12-101-1:2011 砌筑块材的试验方法.第1部分:抗压强度测定.

Methods of test for masonry units - Part 1 : determination of compressive strength.

NF P12-101-11*NF EN 772-11:2011 砌筑块材的试验方法.第11部分:骨料混凝土,热压处理加气混凝土,人造石及天然石砌块等由于毛细管作用导致的吸水性的测定,以及粘土的初始吸水速率的测定.

Methods of test for masonry units - Part 11 : determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay

NF P12-121-1:2011 砌块规范.第1部分:粘土砌块.

Specification for masonry units - Part 1 Clay masonry units.

DIN EN 772-16:2011 砌筑块材试验方法.第16部分:尺寸规格测定.德文版本EN 772-16-2011

This European Standard specifies a method of determining the overall dimensions, thickness and combined thickness of shells and webs, depth of voids and plane parallelism of the bed faces of masonry units.

Methods of test for masonry units - Part 16: Determination of dimensions; German version EN 772-16:2011