Q62 石膏制品 标准查询与下载

BS EN 14566:2008 石膏板系统用机械紧固件.定义、要求和试验方法

This European Standard specifies the characteristics and performance of mechanical fasteners, including nails, screws and staples, intended to be used for the fixing of gypsum plasterboard, gypsum boards with fibrous reinforcement, products from secondary processing and suitable ancillary products as shown in Figure 2, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together. Mechanical fasteners contribute to the stability of the assembly. This European Standard covers the following product performance characteristics: reaction to fire and flexural strength to be measured according to the corresponding European test methods. It provides for the evaluation of conformity of the product to this European Standard. This European Standard also covers the additional technical characteristics that are of importance for the use and acceptance of the products by the construction industry and the reference tests for these characteristics. This European Standard does not cover nails, screws and staples intended for use with materials other than plasterboard and the plasterboard based products referred to above and their associated system components.

Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods

NF P72-604:2008 石膏板用金属串珠和结构要素.定义、要求和试验方法

Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods.

DIN EN 14353:2008 石膏板用金属串珠和结构要素.定义、要求和试验方法

This European Standard specifies the characteristics and performance of metal beads, metal beads combined with paper tape and metal feature profiles designed for use in systems made with gypsum plasterboards, gypsum boards with fibrous reinforcement and products from secondary processing complying with the ENs shown in Figure 2, intended to be used in building construction works. Metal beads and feature profiles, depending upon their material and type, can be featured without decoration, decorated or finished with jointing compounds to receive decoration. It covers the following performance characteristics: reaction to fire and fiexural strength (bending behaviour) to be measured according to the corresponding European test methods. It provides for the evaluation of conformity of the product to this EN. This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry and the reference tests for these characteristics.

Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods; German version EN 14353:2007

NF P72-203-1-1:2008 建筑工程.石膏板铺设工程.第1-1部分:技术模型条款合同单

Building works - Gypsum plasterboards works - Part 1-1 : contract bill of technical model clauses.

NF P72-203:2008 建筑工程.石膏板的铺设工程.第1-1部分:工业模型条款的合同单.第1-2部分:材料选择的一般标准.第2部分:特殊管理条款合同单

Building works - Gypsum plasterboards works - Part 1-1 : contract bill of technical model clauses - Part 1-2 : General criteria for selection of materials - Part 2 : contract bill of special administrative clauses.

DIN EN 15318:2008 石膏块的设计和应用

This European Standard defines the rules for the design of gypsum blocks as specified in EN 12859, assembled with adhesives as specified in EN 12860. Accessory products are also defined in this document. It is applicable to non-loadbearing partition walls and internal insulation of walls in rooms of residential buildings, offices, hospitals, schools etc. and to linings of posts, beams, ducts, shafts etc, that are suitable to receive finishes such as paint and wallpaper without any prior traditional plastering, but having had normal preparation prior to painting. Certain components requiring special provisions are not covered by this standard and require special consideration.

Design and application of gypsum blocks; English version of DIN EN 15318:2008-01

DIN 18183-1:2008 金属框架上带石膏板的隔墙和墙内衬.第1部分:涂覆石膏板

Partitions and wall linings with gypsum boards on metal framing - Part 1: Cladding with gypsum plasterboards

ASTM C1177/C1177M-08 用作防水层的玻璃纤维衬垫石膏基底的标准规范

1.1 This specification covers glass mat gypsum substrate, which is designed to be used as an exterior substrate for a weather barrier. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing

ASTM C840-08 石膏板表面加工和应用标准规范

1.1 This specification covers the minimum requirements for the methods of application and finishing of gypsum board, including related items and accessories. 1.2 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories. 1.2.1 Where this specification is more stringent (size or thickness of framing: size and spacing of fasteners) than the fire-rated construction, this specification shall govern. 1.3 Where sound control is required for a gypsum board assembly, details of construction shall be in accordance with reports of acoustical tests of assemblies that have met the required acoustical values. 1.4 Unheated spaces above gypsum board ceilings shall be properly ventilated (seeAppendix X2). 1.5 The various application systems are located in the following sections: I Application of Single-Ply Gypsum Board to Wood Framing Members 8 II Application of Two-Ply Gypsum Board to Wood Framing Members9 III Application of Gypsum Board by Adhesive Nail-On to Wood Framing Members10 IV Semi-Solid Gypsum Board Partitions11 V Solid Gypsum Board Partitions12 VI Application of Gypsum Board with Adhesives to Interior Masonry or Concrete Walls13 VII Application of Gypsum Board to Rigid Foam Insulation14 VIII Application of Gypsum Board to Steel Framing and Furring15 IX Arches and Bending Radii16 X Application of Gypsum Board to Receive Tile by Adhesive Application 17 XI Exterior Application of Gypsum Wallboard and Exterior Gypsum Soffit Board18 XII Floating Interior Angles19 XIII Control (Expansion) Joints20 XIV Foil-Backed Gypsum Board21 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures)......

Standard Specification for Application and Finishing of Gypsum Board

ASTM C1178/C1178M-08 涂玻璃纤维衬垫防水石膏背板的标准规范

1.1 This specification covers coated glass mat water-resistant gypsum backing panel designed for use on ceilings and walls in bath and shower areas as a base for the application of ceramic or plastic tile. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Within the text, the SI units are shown in brackets. 1.3 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel

BS EN 13915:2007 带蜂窝纸板芯的预制石膏板面板.定义、要求和试验方法

This European Standard specifies the characteristics and performance of prefabricated panels made of gypsum plasterboard facings complying with EN 520 and a cellular paperboard core intended to be used as a lightweight partition, lining and encasement for general use in buildings. This standard covers the following characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load) and thermal resistance to be measured according to the corresponding European test methods. This Standard covers only prefabricated panels installed so that the core is not exposed. The following performance characteristics are linked to systems assembled with prefabricated panels made of gypsum plasterboard facings and a cellular paperboard core: shear strength, fire resistance, direct airborne sound insulation, acoustic absorption and air permeability to be measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions. This document covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Building Industry. It provides for the evaluation of conformity of the products to this document.

Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods

KS F 3507-2007 石膏

이 규격은 건축물의 미장 공사에 사용하는 석고 플라스터에 대하여 규정한다.

Gypsum plaster

NF P72-641:2007 带有多孔纸板芯的预制石膏灰泥板.定义、要求和试验方法

Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods.

DIN EN 13915:2007 带蜂窝纸芯的预制石膏灰泥板面板.定义、要求和试验方法

This European Standard specifies the characteristics and performance of prefabricated panels made of gypsum plasterboard facings complying with EN 520 and a cellular paperboard core intended to be used as a lightweight partition, lining and encasement for general use in buildings. This standard covers the following characteristics: reaction to fire, water vapour permeability, fiexural strength (breaking load) and thermal resistance to be measured according to the corresponding European test methods. This Standard covers only prefabricated panels installed so that the core is not exposed. The following performance characteristics are linked to systems assembled with prefabricated panels made of gypsum plasterboard facings and a cellular paperboard core: shear strength, fire resistance, direct airborne sound insulation, acoustic absorption and air permeability to be measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions. This document covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Building Industry. It provides for the evaluation of conformity of the products to this document.

Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods; English version of DIN EN 13915:2007-11

DIN EN 14246 Berichtigung 1:2007 吊顶石膏成分.定义、要求和试验方法

Gypsum elements for suspended ceilings - Definitions, requirements and test methods; German version EN 14246:2006, Corrigenda to DIN EN 14246:2006-09; German version EN 14246:2006/AC:2007

BS EN 15318:2007 石膏块的设计和应用

This European Standard defines the rules for the design of gypsum blocks as specified in EN 12859, assembled with adhesives as specified in EN 12860. Accessory products are also defined in this document. It is applicable to non-loadbearing partition walls and internal insulation of walls in rooms of residential buildings, offices, hospitals, schools etc. and to linings of posts, beams, ducts, shafts etc, that are suitable to receive finishes such as paint and wallpaper without any prior traditional plastering, but having had normal preparation prior to painting. Certain components requiring special provisions are not covered by this standard and require special consideration.

Design and application of gypsum blocks

KS L 9005-2007 水泥工业用磷酸盐精制石膏

이 규격은 포틀랜드 시멘트의 응결 지연제로 사용하는 인산 부생 정제 석고(인산을 제조할 때

Refined gypsum from phosphate for cement industry

DIN EN 15319:2007 纤维(石膏)灰泥工程设计的一般原则

This European Standard defines the principles for the design of works carried out using fibrous (gypsum) plaster products as defined in EN 13815. Fibrous (gypsum) plaster casts from the three categories of production below (see Clause 4 of EN 13815:2006) should be involved: a) "cpp" allowing regulatory marking CE; b) "cppv" allowing regulatory marking CE; c) "ipp" either when CE marking is required; or without CE marking (see Annex D - Note 2 of EN 13815:2006). This European Standard applies to both new constructions and to the refurbishment, restructuring or conversion of existing buildings. The common fields of application of fibrous plaster are as set out in Table 1 below. Table 1 -- Common fields of application of fibrous plaster

General principles of design of fibrous (gypsum) plaster works; German version EN 15319:2007

JC/T 803-2007 吸声用穿孔石膏板

本标准规定了吸声用穿孔石膏板的术语和定义、分类和标记、技术要求、试验方法、检验规则及包装、标志、贮存、运输。 本标准适用于室内以吸声为目的而设置孔眼的穿孔石膏板。

Perforated gypsum board for acoustic use

JC/T 800-2007 嵌装式装饰石膏板

本标准规定了嵌装式装饰石膏板的术语和定义、分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于作室内吊顶的嵌装式装饰石膏板。

Decorating gypsum board for lay-in installing