Q62 石膏制品 标准查询与下载
共找到 342 条与 石膏制品 相关的标准，共 23 页
本标准规定了石膏砌块的术语和定义、分类和标记、原材料、要求、试验方法、检验规则以及标志、运输、贮存等内容。 本标准适用于建筑物中非承重隔墙用的石膏砌块
Gypsum blocks
- ICS
- 91.100.10
- CCS
- Q62
- 发布
- 2010-11-22
- 实施
- 2011-03-01
이 표준은 도자기 형재용 석고의 성능을 결정하는 물리 시험에 대하여 규정한다.
Method of physical test for plaster of paris mold for pottery
- ICS
- 81.060.10
- CCS
- Q62
- 发布
- 2010-10-26
- 实施
- 2010-10-26
이 표준은 도자기 제조에 사용하는 형재용 석고(이하 형재용 석고라 한다.)에 대하여 규정한
Plaster of paris mold for pottery
- ICS
- 81.060.10
- CCS
- Q62
- 发布
- 2010-10-26
- 实施
- 2010-10-26
이 표준은 천연 석고, 화학 석고 및 소석고의 화학 분석 방법에 대하여 규정한다.
Methods for chemical analysis of gypsum
- ICS
- CCS
- Q62
- 发布
- 2010-09-03
- 实施
- 2010-09-03
This European Standard specifies the characteristics and performance of metal beads, metal beads combined with paper tape and metal feature profiles designed for use in systems made with gypsum plasterboards, gypsum boards with fibrous reinforcement and products from secondary processing complying with the ENs shown in Figure 2, intended to be used in building construction works. Metal beads and feature profiles, depending upon their material and type, can be featured without decoration, decorated or finished with jointing compounds to receive decoration.It covers the following performance characteristics: reaction to fire and flexural strength (bending behaviour) to be measured according to the corresponding European test methods.It provides for the evaluation of conformity of the product to this EN.This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry and the reference tests for these characteristics.
Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods; German version EN 14353:2007+A1:2010
- ICS
- 91.100.10
- CCS
- Q62
- 发布
- 2010-05
- 实施
Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods.
- ICS
- 91.100.10
- CCS
- Q62
- 发布
- 2010-04-01
- 实施
Analytical methods of gypsum and gypsum products for import and export - Part 4: Determination of volatile sulfur compounds
- ICS
- CCS
- Q62
- 发布
- 2010-01-16
- 实施
- 2010-01-16
Analytical methods of gypsum and gypsum products for import and export - Part 3: Determination of sulfide content
- ICS
- CCS
- Q62
- 发布
- 2010-01-16
- 实施
- 2010-01-16
1.1 These test methods cover the physical testing of gypsum panel products. 1.2 The test methods appear in the following order:
Standard Test Methods for Physical Testing of Gypsum Panel Products
- ICS
- 91.100.10
- CCS
- Q62
- 发布
- 2010
- 实施
1.1 This standard covers terminology relating to gypsum and related building materials and systems. The terms are generically defined. More specific and expanded definitions may appear in appropriate standards.
Standard Terminology Relating to Gypsum and Related Building Materials and Systems
- ICS
- 91.100.10
- CCS
- Q62
- 发布
- 2010
- 实施
1.1 This specification covers accessories used in conjunction with assemblies of gypsum wallboard and gypsum veneer base to protect edges and corners and to provide architectural features (see Fig. 1). 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- ICS
- 91.100.10 (Cement. Gypsum. Lime. Mortar)
- CCS
- Q62
- 发布
- 2010
- 实施
1.1 This standard covers terminology relating to gypsum and related building materials and systems. The terms are generically defined. More specific and expanded definitions may appear in appropriate standards.
Standard Terminology Relating to Gypsum and Related Building Materials and Systems
- ICS
- CCS
- Q62
- 发布
- 2010
- 实施
이 표준은 석면이 함유된 고형시료 상태의 제품 및 원료 중의 석면 분석방법에 대하여 규정한
Determination of asbestos in bulk material
- ICS
- 91.100.20
- CCS
- Q62
- 发布
- 2009-12-29
- 实施
- 2009-12-29
This European Standard specifies the characteristics and performance of gypsum boards with mat reinforcement intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster. Gypsum boards with mat reinforcement are selected for use according to their type, size, thickness and edge profile. The boards may be used for example to provide dry lining finishes to walls, to fixed and suspended ceilings, to partitions, or as cladding to structural columns and beams. Other uses may be for floors, ventilation and smoke extraction ducts, cable trays and sheathing applications.
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement; German version EN 15283-1:2008+A1:2009
- ICS
- 91.100.10
- CCS
- Q62
- 发布
- 2009-12
- 实施
This Standard specifies the characteristics and performance of gypsum fibre boards intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster. Gypsum fibre boards are selected for use according to their type, size, thickness and edge profile. The boards may be used for example to provide dry lining finishes to walls, to fixed and suspended ceilings, to partitions, or as cladding to structural columns and beams. Other uses may be for floors and sheathing applications.
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards; German version EN 15283-2:2008+A1:2009
- ICS
- 01.040.91;91.100.10
- CCS
- Q62
- 发布
- 2009-12
- 实施
DIN EN 520:2009 specifies the characteristics and performance of gypsum plasterboards intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster. The standard covers the following product characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load), impact resistance and thermal resistance. The standard does not cover plasterboards, which have been subject to any secondary manufacturing operations (e. g. insulating composite panels, plasterboards with thin lamination, etc.).
Gypsum plasterboards - Definitions, requirements and test methods; German version EN 520:2004+A1:2009
- ICS
- 91.100.10
- CCS
- Q62
- 发布
- 2009-12
- 实施
Specifications for external renders and internal plasters based on organic binders
- ICS
- 91.100.10
- CCS
- Q62
- 发布
- 2009-10-31
- 实施
- 2009-10-31
This European Standard is applicable to factory-made renders and plasters based on organic binders used for external or internal covering on walls, columns, partitions and ceilings. This European Standard is also applicable to renders and plasters with inorganic binders such as silicates, silanes, siloxanes and silicones. This European Standard contains definitions and final performance requirements. It includes relevant characteristic categories to designate renders and plasters. This European Standard is not applicable to coating materials and coating systems according to EN 1062-1 and EN 13300. This European Standard does not contain recommendations for the design and application of renders and plasters. However, this European Standard may be used for definition of renders and plasters in conjunction with codes of application and national specifications for execution of works.
Specifications for external renders and internal plasters based on organic binders; English version of DIN EN 15824:2009-10
- ICS
- 91.100.10
- CCS
- Q62
- 发布
- 2009-10
- 实施
This European Standard specifies the characteristics and performance of gypsum fibre boards intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster. Gypsum fibre boards are selected for use according to their type, size, thickness and edge profile. The boards may be used for example, to provide dry lining finishes to walls, to fixed and suspended ceilings, to partitions, or as cladding to structural columns and beams. Other uses may be for floors and sheathing applications. This European Standard covers the following product performance characteristics: reaction to fire, water vapour permeability, flexural strength, and thermal resistance. The following performance characteristics are linked to systems assembled with gypsum fibre boards: shear strength, fire resistance, impact resistance, direct airborne sound insulation, acoustic absorption. If required, tests have to be done according to the corresponding European test methods on assembled systems simulating the end use conditions. This European Standard also covers additional technical characteristics that are of importance for the use and acceptance of the product and the reference tests for these characteristics. It provides for evaluation of conformity of the product to this EN. This European Standard does not cover gypsum fibre boards that have been subject to any secondary manufacturing operations (e. g. insulating composite panels, boards with thin lamination etc.). Products covered by EN 520 or EN 13815 are excluded.
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
- ICS
- 01.040.91;91.100.10
- CCS
- Q62
- 发布
- 2009-08
- 实施
This European Standard specifies the characteristics and performance of gypsum boards with mat reinforcement intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster. Gypsum boards with mat reinforcement are selected for use according to their type, size, thickness and edge profile. The boards can be used for example to provide dry lining finishes to walls, to fixed and suspended ceilings, to partitions, or as cladding to structural columns and beams. Other uses can be for floors, ventilation and smoke extraction ducts, cable trays and sheathing applications. This European Standard covers the following product performance characteristics: reaction to fire, water vapour permeability, flexural strength, and thermal resistance. The following performance characteristics are linked to systems assembled with gypsum boards with mat reinforcement: shear strength, fire resistance, impact resistance, direct airborne sound insulation, acoustic absorption. If required, tests should be done according to the corresponding European test methods on assembled systems simulating the end use conditions. This European Standard also covers additional technical characteristics that are of importance for the use and acceptance of the product and the reference tests for these characteristics. It provides for the evaluation of conformity of the product to this EN. This European Standard does not cover gypsum boards with mat reinforcement which have been subject to any secondary manufacturing operations (e. g. insulating composite panels, boards with thin lamination etc.). Products covered by EN 520 or EN 13815 are excluded.
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement
- ICS
- 91.100.10
- CCS
- Q62
- 发布
- 2009-08
- 实施
