Q62 石膏制品 标准查询与下载

KS F 3504-2012 石膏板制品

이 표준은 주로 건축물의 벽, 천장에 사용하는 기초재 및 마감재인 석고 보드 제품에 대하여

Gypsum boards

ASTM C1280-12a 外部石膏面板产品作为外保护壳应用的标准规格

1.1 This specification covers the minimum requirements for and methods of application of exterior gypsum panel products that are specifically designed for use as a substrate for exterior cladding. 1.1.1 This specification does not cover gypsum panel products that are specifically designed for interior applications. 1.2 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories. 1.2.1 This specification shall govern where it is more stringent (size or thickness of framing and size and spacing of fasteners) than the fire-rated construction. 1.3 Where sound control is required for a gypsum panel product assembly, the details of construction shall be in accordance with the acoustical test report of an assembly that has met the required acoustical value(s). 1.3.1 This specification shall govern where it is more stringent (size or thickness of framing and size and spacing of fasteners) than the sound-rated construction. 1.4 Where resistance to racking loads or shear is required for a gypsum panel product assembly, the details of construction shall be in accordance with the racking or shear test report of an assembly that has met the required racking or shear value(s). 1.4.1 This specification shall govern where it is more stringent (size or thickness of framing and size and spacing of fasteners) than the racking or shear-tested construction. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The text of this standard references notes which provide explanatory material. These notes shall not be considered as requirements of the standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing

ASTM C1658/C1658M-12 玻璃纤维石膏板的标准规格

1.1 This specification covers the glass mat gypsum panels described in 1.1.1-1.1.3. 1.1.1 Glass mat interior gypsum panel, designed for use on walls, ceilings, or partitions and that affords a surface suitable to receive decoration. 1.1.2 Glass mat coreboard gypsum panel, and glass mat shaftliner gypsum panel, designed for use as a base in multilayer systems or as gypsum studs or cores in semisolid or solid gypsum board partitions, or in shaftwall assemblies. 1.1.3 Glass mat water-resistant gypsum panel, designed to be used as a base for the application of ceramic or plastic tile on walls or ceilings. This product is also suitable for decoration. (This is distinct from a coated glass mat water-resistant gypsum panel ASTM 1178.) 1.2 Specifications applicable to all glass mat gypsum panels are located in Sections 1-4 and 8-10. Specifications applicable to specific glass mat gypsum panels are located in the following sections: Section Glass mat interior gypsum panel5 Glass mat coreboard gypsum panel, and glass mat shaftliner gypsum panel6 Glass mat water-resistant gypsum panel7 1.3 The values stated in either inch-pound units or SI (metric) are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be used independent of the other. Values from the two systems shall not be combined.

Standard Specification for Glass Mat Gypsum Panels

ASTM C473-12 石膏心墙板产品物理试验的标准试验方法

1.1 These test methods cover the physical testing of gypsum panel products. 1.2 The test methods appear in the following order: Section Flexural Strength (Method A) 7 Core, End and Edge Hardness (Method A) 8 Nail Pull Resistance (Method A) 9 Flexural Strength (Method B) 11 Core, End and Edge Hardness (Method B) 12 Nail Pull Resistance (Method B) 13 Humidified Deflection 14 End Squareness 15 Nominal Thickness 16 Recessed- or Tapered Edge Depth 17 Width 18 Length

Standard Test Methods for Physical Testing of Gypsum Panel Products

JC/T 2076-2011 接缝纸带

本标准规定了接缝纸带的术语和定义、产品标记、要求、试验方法、检验规则以及包装、标志、运输和贮存。 本标准适用于在纸面石膏板施工中板材间拼接、防止开裂用的接缝纸带。其他接缝条带可参照本标准执行。

Paper joint tape

JC/T 2078-2011 石膏装饰条

本标准规定了石膏装饰条的术语和定义、分类和标记、一般要求、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于建筑物室内装饰用的石膏装饰条，如石膏线、石膏线脚、石膏角线、石膏内角。

Gypsum cornices

JC/T 2075-2011 嵌缝石膏

本标准规定了嵌缝石膏的术语和定义、原材料、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于在纸面石膏板施工中以填嵌板材缝隙或找平用的石膏基嵌缝材料。其他嵌缝材料或者用于其他类型板材嵌缝的石膏基材料也可参照本标准。

Joint gypsum

JC/T 2074-2011 烟气脱硫石膏

本标准规定了烟气脱硫石膏的等级和标记、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于采用石灰石/石灰-石膏湿法对含硫烟气进行脱硫净化处理而产生的以二水硫酸钙（CaSO·2HO）为主要成分的烟气脱硫石膏。

Flue gas desulfurization gypsum

JC/T 2077-2011 复合保温石膏板

本标准规定了复合保温石膏板的分类和标记、一般要求、技术要求、试验方法、检验规则以及标志、包装、运输、贮存。 本标准适用于以聚苯乙烯泡沫塑料与纸面石膏板用胶粘剂粘合而成的在建筑室内保温用的复合保温石膏板。采用其他工艺与其他高效保温材料与纸面石膏板复合而成的保温石膏板也可参照本标准执行。

Gypsum plasterboard thermal insulation composite panels

NF P73-201-2:2011 建筑工程.传统纤维(石膏)灰泥顶板.第2部分:特别行政示范条款的承包标书.

Building works - Traditional fibrous (gypsum) plasterworks - Part 2 : contract bill of special administrative model clauses.

NF P73-201-1-2:2011 建筑工程.传统纤维(石膏)灰泥顶板.第1-2部分:材料选择的一般标准

Building works - Traditional fibrous (gypsum) plasterworks - Part 1-2 : general criteria for selection of materials.

DIN EN 12859:2011 石膏块.定义,要求和试验方法;德文版本EN 12859-2011

This European Standard specifies the characteristics and performance of gypsum blocks with smooth faces for which the main intended uses are construction of non-load bearing partitions or independent wall linings and the fire protection of columns, lift shafts, shafts for services, etc. Gypsum blocks are not used to build ceilings. It covers the following performance characteristics related to the essential requirements: - reaction to fire; - resistance to fire; - direct airborne sound insolation; - release of dangerous substances to be measured according to the corresponding European test methods, as well as: - thermal resistance to be calculated from the thermal conductivity values gives in 4.3.2. It describes the reference tests for technical specifications.This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry: - convenience classes for density; - convenience classes for pH. It provides for the evaluation of conformity of the product to this European Standard. This European Standard does not cover gypsum blocks of thickness less than 50 mm or gypsum storey height units.

Gypsum blocks - Definitions, requirements and test methods; German version EN 12859:2011

BS EN 12859:2011 石膏块.定义,试验方法和要求

This European Standard specifies the characteristics and performance of gypsum blocks with smooth faces for which the main intended uses are construction of non-load bearing partitions or independent wall linings and the fire protection of columns, lift shafts, shafts for services, etc. Gypsum blocks are not used to build ceilings. It covers the following performance characteristics related to the essential requirements:  reaction to fire;  resistance to fire;  direct airborne sound insulation;  release of dangerous substances; to be measured according to the corresponding European test methods, as well as:  thermal resistance to be calculated from the thermal conductivity values given in 4.3.2. It describes the reference tests for technical specifications. This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry:  convenience classes for density;  convenience classes for pH. It provides for the evaluation of conformity of the product to this European Standard. This European Standard does not cover gypsum blocks of thickness less than 50 mm or gypsum storey height units.

Gypsum blocks. Definitions, requirements and test methods

ASTM C1396/C1396M-11 石膏灰泥板标准规范

1.1 This specification covers the gypsum boards described in 1.1.1-1.1.9. Note 18212;Specifications C840, C841, C844 and C1280 contain application procedures for gypsum board. 1.1.1 Gypsum wallboard, designed for use on walls, ceilings, or partitions and that affords a surface suitable to receive decoration. 1.1.2 Predecorated gypsum board, designed for use as the finished surfacing for walls, ceilings, or partitions. 1.1.3 Gypsum backing board, coreboard, and shaftliner board, designed for use as a base in multilayer systems or as a gypsum stud or core in semisolid or solid gypsum board partitions, or in shaft wall assemblies. Note 28212;The terms backing board, coreboard, and shaftliner board refer to different end uses. The term gypsum backing board, as used in this specification, shall include gypsum coreboard and gypsum shaftliner board unless otherwise stated. 1.1.4 Water-resistant gypsum backing board, designed primarily to be used as a base for the application of ceramic or plastic tile on walls or ceilings. This product is also suitable for decoration. 1.1.5 Exterior gypsum soffit board, designed for use on exterior soffits and carport ceilings that are completely protected from contact with liquid water. 1.1.6 Gypsum sheathing board, designed for use as sheathing on buildings. 1.1.7 Gypsum base for veneer plaster, designed for use as a base for the application of gypsum veneer plaster. 1.1.8 Gypsum lath, designed for use as a base for the application of gypsum plaster. 1.1.9 Gypsum ceiling board, designed for use on interior ceilings with framing spaced not more than 24 in. [610 mm] on center and that affords a surface suitable to receive water-based texture and other decoration. This product is also suitable for use on interior walls. 1.2 Specifications applicable to all gypsum boards are located in Section 1-4 and 13-15. Specifications applicable to specific gypsum boards are located in the following sections: Section Gypsum Wallboard, Predecorated Gypsum Board, and Laminated Gypsum Board5 Gypsum backing board, gypsum coreboard, gypsum shaftliner board6 Water-resistant gypsum backing board7 Exterior gypsum soffit board8 Gypsum sheathing board

Standard Specification for Gypsum Board

ASTM C1178/C1178M-11 涂层玻璃纤维板的防水石膏背衬板的标准规格

1.1 This specification covers coated glass mat water-resistant gypsum backing panel designed for use on ceilings and walls in bath and shower areas as a base for the application of ceramic or plastic tile. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Within the text, the SI units are shown in brackets. 1.3 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel

ASTM C1264-11 石膏心墙板制品的抽样,检验,淘汰,合格认证,包装,标记,运输,搬运和贮存的标准规格

1.1 This specification covers sampling; inspection; rejection; certification; packaging and marking; and shipping, handling, and storage of gypsum panel products.

Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products

ASTM C1280-11 石膏外保护壳应用的标准规格

1.1 This specification covers the minimum requirements for and methods of application of gypsum sheathing for use as a substrate for exterior wall cladding. 1.2 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories. 1.2.1 This specification shall govern where it is more stringent (size or thickness of framing and size and spacing of fasteners) than the fire-rated construction. 1.3 Where sound control is required for a gypsum sheathing assembly, the details of construction shall be in accordance with the acoustical test report of an assembly that has met the required acoustical value(s). 1.3.1 This specification shall govern where it is more stringent (size or thickness of framing and size and spacing of fasteners) than the sound-rated construction. 1.4 Where resistance to racking loads or shear is required for a gypsum sheathing assembly, the details of construction shall be in accordance with the racking or shear test report of an assembly that has met the required racking or shear value(s). 1.4.1 This specification shall govern where it is more stringent (size or thickness of framing and size and spacing of fasteners) than the racking or shear-tested construction. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The text of this standard references footnotes which provide explanatory material. These footnotes shall not be considered as requirements of the standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Application of Gypsum Sheathing

ASTM C840-11 石膏板的应用和加工的标准规格

1.1 This specification covers the minimum requirements for the methods of application and finishing of gypsum board, including related items and accessories. 1.2 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories. 1.2.1 Where this specification is more stringent (size or thickness of framing: size and spacing of fasteners) than the fire-rated construction, this specification shall govern. 1.3 Where sound control is required for a gypsum board assembly, details of construction shall be in accordance with reports of acoustical tests of assemblies that have met the required acoustical values. 1.4 Unheated spaces above gypsum board ceilings shall be properly ventilated (see Appendix X2). 1.5 The various application systems are located in the following sections: I Application of Single-Ply Gypsum Board to Wood Framing Members 8 II Application of Two-Ply Gypsum Board to Wood Framing Members9 III Application of Gypsum Board by Adhesive Nail-On to Wood Framing Members10 IV Semi-Solid Gypsum Board Partitions11 V Solid Gypsum Board Partitions12 VI Application of Gypsum Board with Adhesives to Interior Masonry or Concrete Walls13 VII Application of Gypsum Board to Rigid Foam Insulation14 VIII Application of Gypsum Board to Steel Framing and Furring15 IX Arches and Bending Radii16 X Application of Gypsum Board to Receive Tile by Adhesive Application 17 XI Exterior Application of Gypsum Wallboard and Exterior Gypsum Soffit Board18 XII Floating Interior Angles19 XIII Control (Expansion) Joints20 XIV Foil-Backed Gypsum Board21 XVApplication of Vinyl Faced Gypsum Board22 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Application and Finishing of Gypsum Board

JC/T 698-2010 石膏砌块

本标准规定了石膏砌块的术语和定义、分类和标记、原材料、要求、试验方法、检验规则以及标志、运输、贮存等内容。 本标准适用于建筑物中非承重隔墙用的石膏砌块

Gypsum blocks

JC/T 829-2010 石膏空心条板

本标准规定了石膏空心条板的术语和定义、外形、规格、标记、原材料、要求、试验方法、检验规则和标志、运输、贮存。 本标准适用于建筑物中非承重内隔墙用的石膏空心条板。

Gypsum panel with cavities