Q74 塑料构配件 标准查询与下载

ASTM F387-11 带有泡沫层的弹性地板覆盖物厚度测量的标准试验方法

The overall thickness or caliper of resilient flooring is a basic physical property. However, conventional means of measuring the thickness, such as a hand micrometer or regular dial micrometer, are not applicable for foam-layer products due to the error from compressing the foam. This test method minimizes this type of measuring error and still retains the convenience and speed of measurement. Measurement of the product thickness may be required for quality control purposes or to ensure compliance with applicable specifications. 1.1 This test method covers the determination of the thickness of resilient non-textile floor coverings containing a foam layer as part of the construction. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer

DIN EN 13245-2:2010 塑料.建筑物用未增塑聚氯乙烯(PVC-U)型材.第2部分:内部和外部墙及天花板精整用PVC-U型材和PVC-UE型材.德文版本EN 13245-2-2008 + AC-2009

Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes; German version EN 13245-2:2008 + AC:2009

JG/T 263-2010 建筑门窗用未增塑聚氯乙稀彩色型材

本标准规定了建筑门窗用未增塑聚氯乙稀彩色型材的术语和定义、分类与标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以未增塑聚氯乙烯型材为基材，以共挤、覆膜、涂装、通体着色工艺加工的建筑门窗用未增塑聚氯乙烯彩色型材。

Color unplasticized polyvinyl chloride profiles for wihdow and door

JIS A 5705:2010 聚氯乙烯地板覆盖物

This Japanese Industrial Standard specifies the polyvinyl chloride floor coverings used mainly for building floors. In addition, the comparison table between previous and current editions of this Standard on technically significant revisions is given in Annex A.

Polyvinyl chloride floorcoverings

NF P62-200:2010 弹性地板覆盖物.带有泡沫衬背的同质和异质光滑橡胶地板覆盖物规范.

Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing.

BS EN 12199:2010 弹性地板覆盖物.同质和不同质凸纹橡胶地板覆盖物规范

This European Standard specifies the characteristics of homogeneous and heterogeneous relief or studded rubber floor coverings, supplied in either tile or roll form. This European Standard includes a classification system based on intensity of use, which shows where these resilient floor coverings should give satisfactory service (see EN 685). It also specifies requirements for marking.

Resilient floor coverings .Specifications for homogeneous and heterogeneous relief rubber floor coverings

BS EN 438-9:2010+A1:2013 高压装饰性层压板(HPL).基于热固树胶的薄板材(通常称为层压板).可替换芯层的分类和规范

High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for alternative core laminates

JIS A 5558:2010 窗和门的制造用未增塑聚氯乙烯(PVC-U)型材

Unplasticized polyvinyl chloride (PVC-U) profiles for fabrication of windows and doors

ASTM D4803-10 聚氯乙烯(PVC)建筑产品的预测热装配的标准试验方法

Heat buildup in PVC exterior building products due to absorption of the energy from the sun may lead to distortion problems. Heat buildup is affected by the color, emittance, absorptance, and reflectance of a product. Generally, the darker the color of the product, the more energy is absorbed and the greater is the heat buildup. However, even with the same apparent color, the heat buildup may vary due to the specific pigment system involved. The greatest heat buildup generally occurs in the color black containing carbon black pigment. The black control sample used in this test method contains 2.5 parts of furnace black per 100 parts of PVC suspension resin. The maximum temperature rise above ambient temperature for this black is 90°F (50°C) for a 45° or horizontal surface when the sun is perpendicular to the surface and 74°F (41°C) for a vertical surface assuming that the measurements were done on a cloudless day with no wind and heavy insulation on the back of the specimen. See Appendix X1. This test method allows the measurement of the temperature rise under a specific type heat lamp, relative to that of a black reference surface, thus predicting the heat buildup due to the sun''s energy. The test method allows prediction of heat buildup of various colors or pigment systems, or both. This test method gives a relative heat buildup compared to black under certain defined severe conditions but does not predict actual application temperatures of the product. These will also depend on air temperature, incident angle of the sun, clouds, wind velocity, insulation, installation behind glass, etc. 1.1 This test method covers prediction of the heat buildup in rigid and flexible PVC building products above ambient air temperature, relative to black, which occurs due to absorption of the sun''s energy. Note 18212;This test method is expected to be applicable to all types of colored plastics. The responsible subcommittee intends to broaden the scope beyond PVC when data on other materials is submitted for review. Note 28212;There are no ISO standards covering the primary subject matter of this test method. 1.2 Rigid PVC exterior profile extrusions for assembled windows and doors are covered in Specification D4726. 1.3 Rigid PVC exterior profiles for fencing are covered in Specification F964. 1.4 Rigid PVC siding profiles are covered in Specification D3679. 1.5 Rigid PVC soffit profiles are covered in Specification D4477. 1.6 Rigid PVC and Rigid CPVC plastic building products compounds are covered in Specification D4216. 1.7 The text of this test method references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this test method. 1.8 The values stated in inch-pound units are to be regarded as the standard. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility o......

Standard Test Method for Predicting Heat Buildup in PVC Building Products

JG/T 256-2009 未增塑聚氯乙烯塑料栅栏

本标准规定了未增塑聚氯乙烯(PVC-U)塑料栅栏(以下简称塑料栅栏)的术语及定义、分类和标记、材料、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于起装饰分隔作用的道路、绿地、围墙等场所，由基材为未增塑聚氯乙烯(PVC-U)型材组装成的塑料栅栏。

Unplasticized polyvinyl chloride plastic fence

ANSI/ASTM D4726:2009 刚性聚氯乙烯(PVC)外观规范.组装门和窗户用挤压型材

Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

ASTM D6662-09 聚烯烃基塑料木材盖板的标准规范

1.1 This specification covers polyolefin-based plastic lumber products for use as exterior residential decking boards. 1.2 Plastic lumber products are currently made predominantly with recycled polyolefin plastics (in particular high-density polyethylene) where the products are more or less non-homogenous in the cross-section. However, this specification is also potentially applicable to similar manufactured plastic products made from other plastic and plastic composite materials that have non-homogenous cross-sections. 1.3 This specification details a procedure to calculate recommended span lengths for spacing of support joists. This procedure was developed using experimental data from a typical unreinforced plastic lumber made predominantly from recycled high-density polyethylene. The methodology to develop span lengths for other types and compositions of plastic lumber is detailed in Appendix X1 of this standard. 1.4 The values are stated in inch-pound units, as these are currently the most common units used by the construction industry. Equivalent SI units are indicated in parentheses. However, the units stated for irradiance exposure in the weatherability section (6.3) are in SI units as these are the units commonly used for testing of this type. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 18212;There is no similar or equivalent ISO Standard.

Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

ASTM D4726-09 装配门窗用硬质聚氯乙烯(PVC)外部挤压型材的标准规格

1.1 This specification establishes requirements for the material properties, including dimensional stability, weatherability, and extrusion quality, of rigid poly(vinyl chloride) (PVC) exterior profile extrusions used for assembled windows and doors. Methods for testing and for identifying exterior profile extrusions that comply with this specification are also provided. 1.2 Rigid PVC recycled plastic may be used in this product in accordance with requirements in Section 5. Note 18212;Information with regard to application, assembly, and installation should be obtained from the manufacturers of the profiles and of the windows and doors. Note 28212;Refer to Specification D 3678 for interior profile extrusions. 1.3 Color-hold guidelines are provided in an appendix for the manufacturer''s product development and quality performance use. 1.4 Color-hold guidelines are presently limited to white, grey, beige, light brown, and dark brown (see Figs. X1.1 through X1.5). Additional colors will be added as color guidelines are developed. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Note 38212;There are no ISO standards covering the primary subject matter of this specification. 1.6 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard. 1.7 The following safety hazards caveat pertains only to the test methods portion, Section 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

ASTM E2568-09e1 PB外部加隔热层和装饰面的标准规范

1.1 This specification covers PB Exterior Insulation and Finish Systems (EIFS) defined as an exterior, non-bearing wall covering providing a weather-resistant exterior wall envelope on walls required to be combustible or noncombustible, fire-resistance-rated or nonfire-resistance-rated. Further, PB EIFS is a system described as being applied over expanded polystyrene or polyisocyanurate insulation board, an adhesive or mechanical attachment of the insulation board to a substrate, or both, glass fiber reinforcing mesh, a base coat on the face of the insulation board, and a textured protective finish coat. 1.2 This specification does not cover Class PB EIFS with drainage. 1.3 This specification qualifies EIFS products for use in normal service conditions and is not for evaluating in service EIFS installations. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for PB Exterior Insulation and Finish Systems

ASTM F964-09 护栏用硬质聚氯乙烯外部轮廓的标准规范

The purpose of this specification is to establish a recognized standard of quality for rigid poly vinyl chloride (PVC) exterior profiles for use in assembling agricultural, commercial, and residential fencing and railing. The term “PVC fence” refers to complete fencing and railings systems in which the primary structural members such as posts, rails, spindles, pickets, and gates are made from PVC exterior profiles. Accessory components (not included in this specification), including bolts, screws, hinges, latches, caps, and brackets, may be made from PVC and/or non-PVC materials. The information contained in this specification is intended to be helpful to producers, distributors, and users and to promote understanding between purchasers and sellers.1.1 This specification establishes requirements for the material properties and physical properties, including dimensional tolerances, extrusion quality, and weatherability, of rigid poly vinyl-chloride (PVC) exterior profiles used for agricultural, commercial, residential fencing and railing. Methods for testing and for identifying exterior profile extrusions that comply with this specification are also provided. Note 18212;Information with regard to application, assembly, and installation should be obtained from the manufacturer and/or in accordance with Practice F 1999. Note 28212;Loadbearing characteristics for fence and railing assemblies are not addressed within this specification (for example, windload, horizontal or vertical guardrail loading). 1.2 The material used in these exterior profiles is limited to rigid poly (vinyl chloride) (PVC) compounds in a single homogeneous extrusion or in a coextrusion of two or more PVC compounds in distinct layers. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are provided for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing

DIN EN 13245-2:2008 塑料.建筑物用未增塑聚氯乙烯(PVC-U)型材.第2部分:内部和外部墙及天花板精整用PVC-U型材和PVC-UE型材

This European Standard specifies the health and safety requirements for unplasticized poly(vinyl chloride) (PVC-U) profiles and cellular unplasticized poly(vinyl chloride) (PVC-UE) profiles for interior and exterior wall and ceiling finishes. It also specifies methods for the evaluation of conformity of the products to the requirements, and includes requirements for their marking. The products are intended for use as wall and ceiling finishes for internal and external applications according to the manufacturer's specifications, which may include specifications for the fixings. Profiles for the management of electrical power cables, communication cables and power track systems used for the distribution of electrical power, roofline products (fascia and soffit) including guttering, internal trim profiles including window boards and profiles for windows or doors are not covered by this European Standard.1)

Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes; German version EN 13245-2:2008

BS 4592-6:2008 工业地板和梯板.玻璃增强塑料(GRP)注模开口网状栅栏和保护栅栏.规范

This part of BS 4592 specifies requirements for the design, manufacture, supply and installation of glass reinforced plastics (GRP) moulded open mesh gratings intended for industrial flooring, walkways and stair treads. It is not applicable where access to machinery is required, in which case the requirements of BS EN ISO 14122 apply. NOTE For the common requirements for industrial flooring and stair treads, see BS 4592-0. In addition to the definitive requirements, this standard also requires the items detailed in BS 4592-0:2006, Clause 4 to be documented. For compliance with this standard, both the definitive requirements and the documented items have to be satisfied.

Industrial type flooring and stair treads - Glass reinforced plastics (GRP) moulded open mesh gratings and protective barriers - Specification

JIS A 6930 AMD 1:2008 住宅用塑料薄膜蒸汽阻挡层(修改件)

This standard is an Amendment of Plastic films vapour barrier for residential use.

Plastic films vapour barrier for residential use (Amendment 1)

BS 8204-6:2008 整平板、底基和现场铺设用地板材料.第6部分:合成树脂地板材料.实施规程

This part of BS 8204 gives recommendations for the design and installation of in situ synthetic resin flooring, based on liquid synthetic resin binders in which curing takes place by chemical reaction of the resin components, used internally in buildings. The synthetic resin floorings are bonded to direct finished concrete slabs, polymer-modified cementitious or fine concrete screeds and to existing concrete floors. Annex A gives recommendations for the design and installation of resin terrazzo flooring. Synthetic resin floorings applied to other materials such as timber or metal are not covered by this code of practice. The installation of resilient sports surfacings based on synthetic resins is not covered by this code of practice.

Screeds, bases and in situ floorings - Part 6: Synthetic resin floorings - Code of practice

BS EN ISO 19712-3:2013 塑料. 实心表面处理用装饰材料. 性能的测定. 实心材料表面形状

Plastics - Decorative solid surfacing materials - Determination of properties - Solid surface shapes