Q74 塑料构配件 标准查询与下载

DIN EN 1455-1:1999 建筑结构中污物和废水排放(低温和高温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管道、管件和系统规范

The document specifies the requirements for pipes," fittings and the system of acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) solid-wall piping systems in the field of soil and waste discharge (low and high temperature) inside buildings (marked with ""B"")"," for both inside buildings and buried in ground within the building structure (market with ""BD"").#",#

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specification for pipes, fittings and the system; German version EN 1455-1:1999

DIN EN 1565-1:1999 建筑结构中污物和废水排放(低温和高温)用塑料管道系统.苯乙烯共聚掺混料(SAN+PVC).第1部分:管道、管件和系统规范

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system; German version EN 1565-1:1998

DIN EN 513:1999 窗门生产用无增塑聚氯乙烯(PVC-U)型材.人工风蚀测定耐气候性和耐风化性

Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering; German version EN 513:1999

ASTM F1700-99 实心乙烯基楼板砖标准规范

1.1 This specification covers solid vinyl floor tiles that are monolithic, surface decorated or printed, and that have binder contents referenced in Table 1. 1.2 This type of floor covering is intended for use in commercial, light commercial, and residential buildings. General information and performance characteristics which determine serviceability and recommended use are included in this specification. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 The values stated in inch-pounds are to be regarded as the standard. The values given in parenthesis are provided for information only.

Standard Specification for Solid Vinyl Floor Tile

NF P38-301-3:1998 透光塑料单层屋顶.第3部分:PVC片的试验方法和特殊要求(欧洲标准EN 1013-3)

Light transmitting profiled plastic sheeting for single skin roofing. Part 3 : specific requirements and test methods for sheets of polyvinyl chloride (PVC).

ASTM F1913-98 没有背衬的乙烯基薄楼板覆层的标准规范

1.1 This specification covers sheet floor covering having a vinyl wear layer without backing. Products also may contain a clear specialty performance top layer(s). 1.2 This type of floor covering is intended for use in commercial and light commercial buildings. General information and performance characteristics, which determine service-ability and recommended use, are included in this specification. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Vinyl Sheet Floor Covering Without Backing

ASTM F1914-98 弹性楼板覆层的短期陷穴和剩余陷穴的标准试验方法

1.1 This method covers the determination of short term indentation and residual indentation of resilient nontextile floor coverings, such as vinyl plastic, linoleum, and felt-backed materials, when subjected to a concentrated load. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Short-Term Indentation and Residual Indentation of Resilient Floor Covering

JIS A 6930:1997 住宅用塑料薄膜蒸汽阻挡层

この規格は，主として住宅を断熱構造とする場合において，断熱構造部の防露のために，別に防湿層を構成する際に使用するプラスチック系フィルムについて規定する。

Plastic films vapour barrier for residential use

DB62/T 496-1997 大型塑料螺旋管

本标准规定了塑料螺旋管的技术要求、试验方法和检验规则等。本标准中的塑料螺旋管适用于输水工程、农田灌溉、盐碱地改良排水，城市排水、排污、公路路基排水以及电缆和通讯电缆的套管、圆形柱的模板、高架桥的空心管等工程。

Large plastic spiral pipe

ASTM D4803-97 聚氯乙烯(PVC)建筑产品中预测生热性的标准试验方法

1.1 This test method covers prediction of the heat buildup in rigid and flexible PVC building products above ambient air temperature, relative to black, which occurs due to absorption of the sun''s energy. Note 1-This test method is expected to be applicable to all types of colored plastics. The responsible subcommittee intends to broaden the scope beyond PVC when data on other materials is submitted for review. Note 2-There are no ISO standards covering the primary subject matter of this test method. 1.2 The values stated in inch-pound units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific safety hazard statements are given in Section 7.

Standard Test Method for Predicting Heat Buildup in PVC Building Products

ASTM D4803-97(2002)e1 聚氯乙烯(PVC)建筑产品中预测生热性的标准试验方法

Heat buildup in PVC exterior building products due to absorption of the energy from the sun may lead to distortion problems. Heat buildup is affected by the color, emittance, absorptance, and reflectance of a product. Generally, the darker the color of the product, the more energy is absorbed and the greater is the heat buildup. However, even with the same apparent color, the heat buildup may vary due to the specific pigment system involved. The greatest heat buildup generally occurs in the color black containing carbon black pigment. The black control sample used in this test method contains 2.5 parts of furnace black per 100 parts of PVC suspension resin. The maximum temperature rise above ambient temperature for this black is 90°F (50°C) for a 45° or horizontal surface when the sun is perpendicular to the surface and 74°F (41°C) for a vertical surface assuming that the measurements were done on a cloudless day with no wind and heavy insulation on the back of the specimen.8 See Appendix X1. This test method allows the measurement of the temperature rise under a specific type heat lamp, relative to that of a black reference surface, thus predicting the heat buildup due to the sunrsquo;energy. The test method allows prediction of heat buildup of various colors or pigment systems, or both. This test method gives a relative heat buildup compared to black under certain defined severe conditions but does not predict actual application temperatures of the product. These will also depend on air temperature, incident angle of the sun, clouds, wind velocity, insulation, installation behind glass, etc. 1.1 This test method covers prediction of the heat buildup in rigid and flexible PVC building products above ambient air temperature, relative to black, which occurs due to absorption of the sun''s energy.Note 18212;This test method is expected to be applicable to all types of colored plastics. The responsible subcommittee intends to broaden the scope beyond PVC when data on other materials is submitted for review. Note 28212;There are no ISO standards covering the primary subject matter of this test method.1.2 Rigid PVC exterior profile extrusions for assembled windows and doors are covered in Specification D 4726.1.3 Rigid PVC exterior profiles for fencing are covered in Specification F 964.1.4 Rigid PVC siding profiles are covered in Specification D 3679.1.5 Rigid PVC soffit profiles are covered in Specification D 4477.1.6 Rigid PVC and Rigid CPVC plastic building products compounds are covered in Specification D 4216.1.7 The text of this test method references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this test method.1.8 The values stated in inch-pound units are to be regarded as the standard.1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific safety hazard statements are given in Section 7.

Standard Test Method for Predicting Heat Buildup in PVC Building Products

JIS K 6785:1995 硬质聚氯乙烯窗户外廓

Profiles for rigid polyvinyl chloride (PVC) window

NF P24-501:1995 窗户制造用未增塑聚氯乙烯型材.主截面耐跌落物撞击的测定

Unplasticized polyvinychloride (PVC-U) profiles for the fabrication of windows and doors. Determination of the resistance to impact of main profiles by falling mass.

NF P24-502:1995 窗户制造用未增塑聚氯乙烯型材.加热150℃后外观试验方法

Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Appearance after exposure at 150 degrees celsius. Test method.

NF P24-503:1995 窗户制造用未增塑聚氯乙烯型材.热收缩性测定

Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Determination of heat reversion.

JG/T 3018-1994 PVC塑料窗

本标准规定了平开及推拉硬聚氯乙烯塑料窗的品种、规格、分类、技术要求、试验方法、检验规则和包装、标志、运输、贮存。 本标准适用于由硬聚氯乙烯（(PVC）异型材组装成的固定窗、平开塑料窗、带纱扇的平开塑料窗、推拉塑料窗和带纱扇的推拉塑料窗。

Rigid polyvinyl chloride windows

JG/T 3005.1-1993 PVC门窗帘吊挂启闭装置

本标准规定了硬聚氯乙烯（PVC）门窗帘吊挂启闭装置的产品分尖、技术要求、试验方法、检验规则、标志、包装、运输、储存等内容。 本标准适用于建筑物门窗和室内装饰用硬聚氯乙烯导轨式门窗帘吊挂启闭装置。

PVC curtain box of windows and doors

JC/T 492-1992 火车客车用片状模塑料（SMC）窗框

Sheet molding compound (SMC) window frame intended to be used in train passenger coaches

DIN 16830-1:1991 高冲击韧性聚氯乙烯(PVC-HI)制窗框.第1部分:检验

This standard contains test methods for high impact polyvinylchloride profiles to be used for the manufactoring of windows and doors.

High impact polyvinyl chloride (PVC-HI) window profiles; testing

DIN 16830-2:1991 高冲击韧性聚氯乙烯(PVC-HI)制白色窗框.第2部分:要求

This standard contains the requirements for white coloured high impact polyvinyl chloride profiles, to be used for the manufactoring of windows and doors.#,,#

High impact white polyvinyl chloride (PVC-HI) window profiles; requirements