共找到 680 条与 制动系统 相关的标准,共 46 页
All-terrain vehicle braking performance requirements and test methods
本文件规定了汽车,摩托车.轻便摩托车及挂车用制动软管.制动软管接头和制动软管总成的结构、性能要求.试验方法.标识。 本文件适用于汽车,摩托车.轻便摩托车及挂车使用的液压,气压,真空制动软管及制动软管接头和制动软管总成。 本文件不适用于汽车用螺旋管和高温输气橡胶软管。
Structure, performance requirements and test methods of brake hose
本标准规定了乘用车自动紧急制动系统(AEBS)的术语和定义、技术要求及试验方法。本标准适用于安装有自动紧急制动系统(AEBS)的M1 类车辆。
Performance requirements and test methods for advanced emergency braking system (AEBS) of passenger cars
本标准界定了ISO3833 中定义的汽车和挂车所使用的制动和制动装置的主要术语。本标准适用于车辆制动过程中所包含的制动系统或零部件,也可用于描述制动过程中的全部或部分特性参数。
Road vehicles—Vocabulary and difinition for braking of automotive vehicles and their trailers
本标准规定了商用车辆自动紧急制动系统(AEBS)的术语和定义、技术要求、、试验方法。 本标准适用于安装有自动紧急制动系统(AEBS)的My、Ms和N类车辆。
Performance requirements and test methods for advanced emergency braking system (AEBS) of commercial vehicles
Road vehicles—Labelling of containers for petroleum-based or non-petroleum-based brake fluid
Performance requirements and testing methods for electronic stability control system(ESC) for commercial vehicles
Brake drum for automobile
本标准规定了高速CAN总线物理层的术语和定义、物理层的一般要求、物理层信令、高速介质访问单元和总线失效管理的技术要求。 本标准适用于125 Kbit/s到1 Mbit/s通讯速率的高速CAN总线。
Passenger cars physical layer technical specification of CAN bus
Passenger cars—Stopping distance at straight-line braking with ABS—Open loop test method
Heavy commercial vehicles—Braking in a turn—Open-loop test methods
Brake disc for automobile
本标准规定了汽车盘式制动器、鼓式制动器、气压制动传动装置、液压制动传动装置和驻车制动装置修理竣工的技术要求及检验规则。 本标准适用于汽车及挂车的制动器和制动传动装置的修理,其他车辆制动器的修理可参照执行。 2
Technical specifications for motor vehicle brake system
本标准规定了商用车辆缓速制动系统的性能试验方法。 本标准适用于装备了缓速制动系统的商用车辆。
Performance test methods for endurance braking systems of commercial vehicles
本标准规定了特定种类汽车内饰材料垂直燃烧特性的技术要求和试验方法。 本标准适用于运载超过22名乘客的M类汽车内饰用窗帘、遮阳帘和/或其他内部悬挂材料,不适用于有站立乘客的城市客车。
Requirement of vertical flammability characteristic and test method for certain category automobile interior material
本标准规定了汽车和挂车气压制动系各部件(包括气顶液制动系中的气动部件)上接口的一种识别标记。 本标准适用于汽车和挂车,也可用于制动系统示意图。
Motor vehicles and towed vehicles.Air braking systems.Identification of connections on units
本标准规定了汽车用气压制动卡钳总成的性能要求及台架试验方法”本标准适用于工作介质为压缩空气的气压制动卡钳总成(不包含制动气室〉”
Performance requirements and bench test methods for air brake caliper assemble of automobile
本标准规定了轻型汽车电子稳定性控制系统的性能要求和试验方法”本标准适用于最大设计总质量不大于3 500 kg的M类和N类车辆的电子稳定性控制系统。 最大投汁息辰量任3 500 kg以上但不大于5000 kg的M类和N类车辆可参照执行。
Performance requirements and testing methods for electronic stability control system (ESC) for light vehicles
本标准规定了商月车辆和挂车制墩系统的技术要求和试验方法。 本标准适用二GB/T15089规定的Mz、M3及N类机动车辆和〇类挂车。 本标准不适用于下列车辆: ————一设计车速不超过25 km/h的车辆;_不能与设计车速超过25 km/h 的机动车辆挂接的挂车。
Technical requirements and testing methods for commercial vehicle and trailer braking systems
本标准规定了乘用车爆胎监测及控制系统的术语及定义、技术要求、试验方法。本标准适用于装备有ABS系统后安装车辆爆胎监测及控制系统的M类车辆。
Technical requirements and testing method of tire blow-out monitoring and controlling system for passenger car
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号