U12 船体通用结构 标准查询与下载

DIN 83224:1993 船梯拐弯处平台

The document describes devices suitable for the protection against fall as well as for the recovery of users of especially large ladders. Resting podests are required for ladders of more than 10 m height. They consist of a seating, a back and the necessary framework.#,,#

Resting podests at ladders on ships

DIN 83213:1993 船舷墙踏梯

Footholds on bulwark

DIN 83225:1993 船梯护栏

The document describes devices suitable for the protection against fall as well as for the recovery of users of especially large ladders. Retainers are provided for ladders of more than 6 m height.

Retainers at ladders on ships

ISO 1751:1993 造船及海上结构物 舷窗

Specifies the classification (series, types and models) and gives the dimensions for interchangeability and construction, materials, tests, marking and designation of the side scuttles.

Shipbuilding and marine structures; ships' side scuttles

ISO 3903:1993 造船及海上结构物 普通矩形窗

Specifies the classification (series, types and models) and gives the dimensions for interchangeability and construction, materials, tests, marking and designation of the windows.

Shipbuilding and marine structures; ships' ordinary rectangular windows

ANSI/ASTM F1384:1993 船用接合门着火试验惯例

This test method for fire tests covers marine joiner door assemblies of various materials and types of construction for use in bulkhead openings to retard the passage of fire. Tests made in conformity with this test method will register performance during the test exposure; but such tests shall not be construed as determining suitability for use after exposure to fire. Tests made in conformity with this test method will develop a set of data to assist regulatory agencies to determine the suitability of joiner door assemblies for use in locations where fire resistance is required. This test method should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this practice may be used as elements of a fire risk assessment that takes into account all of the factors that are pertinent to an assessment of the fire hazard of a particular end use. The values stated in SI units are to be regarded as the standard. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Practice for Fire Tests of Marine Joiner Doors

NAVY A-A-50537-1992 木匠工具柜

The Genera Services Administration has authorized the use of this Commercial Item Description.

CHEST, TOOL: CARPENTER OR COMPANY

ASTM F1455-92(2007) 造船用结构部件选择的标准导则

1.1 This guide provides a recommended list of selected ship structure details for use in ship construction.1.2 Structural details which have failed in service and are not recommended for use in ship construction are included as well.1.3 This guide is intended to convey the lessons learned on different configurations of ship structure details, not the dimensions, thickness, or construction methods which would result from structural calculations.

Standard Guide for Selection of Structural Details for Ship Construction

ASTM F1455-92(2011) 船舶建造结构细节部件选择的标准指南

1.1 This guide provides a recommended list of selected ship structure details for use in ship construction. 1.2 Structural details which have failed in service and are not recommended for use in ship construction are included as well. 1.3 This guide is intended to convey the lessons learned on different configurations of ship structure details, not the dimensions, thickness, or construction methods which would result from structural calculations.

Standard Guide for Selection of Structural Details for Ship Construction

ANSI/ASTM F1455:1992 造船用结构部件的选择指南

This guide provides a recommended list of selected ship structure details for use in ship construction. Structural details which have failed in service and are not recommended for use in ship construction are included as well. This guide is intended to convey the lessons learned on different configurations of ship structure details, not the dimensions, thickness, or construction methods which would result from structural calculations

Guide for Selection of Structural Details for Ship Construction

ASTM F1385-92 载油舱平台的标准规程

1.1 This practice provides design, construction, and installation criteria for platforms in cargo tanks.1.2 Where platforms are attached to ladders see Figs. 1-4.1.3 The values stated in SI (metric) units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Platforms in Cargo Tanks

ASTM F1455-92 造船用结构部件选择的标准导则

1.1 This guide provides a recommended list of selected ship structure details for use in ship construction. 1.2 Structural details which have failed in service and are not recommended for use in ship construction are included as well. 1.3 This guide is intended to convey the lessons learned on different configurations of ship structure details, not the dimensions, thickness, or construction methods which would result from structural calculations.

Standard Guide for Selection of Structural Details for Ship Construction

ASTM F1455-92(2001) 造船用结构部件选择的标准导则

1.1 This guide provides a recommended list of selected ship structure details for use in ship construction. 1.2 Structural details which have failed in service and are not recommended for use in ship construction are included as well. 1.3 This guide is intended to convey the lessons learned on different configurations of ship structure details, not the dimensions, thickness, or construction methods which would result from structural calculations.

Standard Guide for Selection of Structural Details for Ship Construction

CB/T 3368-1991 船体防火分隔典型耐火结构型式

本标准规定了船体防火分隔典型耐火结构型式和一般通用尺寸。 本标准适用于各类船舶结构性限界面所设置的各级防火分隔(不包括防火门，甲板敷料，管系通舱附件，电缆贯穿防火分隔面的各种结构型式)。

Typical fire-resistant structural types of hull fire divisions

CB 3371-1991 油船货油舱区域船体节点结构

Hull node structure of cargo oil tank area of oil tanker

CB/T 3371-1991 油船货油舱区域船体节点结构

本标准规定了油船货油舱区域典型船体结构节点、零部件的结构型式和尺寸。 本标准适用于油船、其他船舶、海洋工程建筑物等亦可参照使用。

Hull node structure of cargo oil tank area of oil tanker

CB 3370-1991 箱形船船体结构节点

本标准规定了箱形船船体结构节点的形式和参数。 本标准适用于船长小于60m的起重船、打桩船、挖泥船等非自航的箱形船，其他箱形船舶可参照使用。

Box ship hull structure nodes

BS EN 29519:1991 造船和海上建筑物.踏步阶梯级

Types, dimensions, materials, manufacture and designation.

Shipbuilding and marine structures - Rungs for dog-step ladders

BS 7465:1991 船舶窗户和舷窗术语表

Vocabulary for terms in use relative to any window suitable for installation aboard ships and marine structures.

Glossary of terms for ships windows and side scuttles

NAVY MIL-C-3774 B-1991 容量为12000和16000磅的开口木制板条箱

This specification covers open crates.

CRATES, WOOD; OPEN 12,000- AND 16,000-POUND CAPACITY