U12 船体通用结构 标准查询与下载

DIN ISO 6043:1986 造船.受拉伸载荷的孔眼和叉结构总成.主要尺寸

Shipbuilding; eye and fork assemblies under tension load; main dimensions; identical with ISO 6043, edition 1985

CB* 3181.2-1986 船体结构 节点、零部件（船长小于90m）

本标准适用于船长小于90m的货船，属此尺度范围的其他船舶可参照使用。

Hull structural nodes and parts (ship length less than 90m)

DIN ISO 8146:1986 造船.椭圆形眼板

This standard lays down the dimensions and materials of oval eyeplates primarily intended for mounting on ships' decks and as guy eyeplates on ships' derrick booms for cargo handling purposes. They are used for shackle connection.

Shipbuilding; oval eyeplates; identical with ISO 8146, edition 1985

ASTM F1030-86(2008) 门操作装置选择的标准作法

1.1 This practice provides guidance in the selection of manual and power-actuated valve operators. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Selection of Valve Operators

ASTM F994-86(1996) 向船外排水船身渗透连接件的设计与安装

1.1 This specification covers carbon steel overboard discharge hull penetrations for system piping of NPS 1 through NPS 24 (see Note 1). Note 18212;The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such TRADITIONAL terms as nominal diameter, size, and nominal size. 1.2 The minimum pipe schedule and reinforcement dimensions presented in Tables 1-6 are based on specifications in 46 CFR, 56.50-95 and Navy Design Data Sheet 100-1. 1.3 This specification does not include sea chest penetrations. 1.4 This specification does not include penetrations in protective plating.

Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections

ASTM F994-86(2011) 向船外排水船身渗透连接件的设计与安装标准规范

1.1 This specification covers carbon steel overboard discharge hull penetrations for system piping of NPS 1 through NPS 24 (see Note 1). Note 18212;The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such TRADITIONAL terms as nominal diameter, size, and nominal size. 1.2 The minimum pipe schedule and reinforcement dimensions presented in Tables 1-6 are based on specifications in 46 CFR, 56.50-95 and Navy Design Data Sheet 100-1. 1.3 This specification does not include sea chest penetrations. 1.4 This specification does not include penetrations in protective plating.

Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections

ASTM F994-86(2001) 向船外排水船身渗透连接件的设计与安装

1.1 This specification covers carbon steel overboard discharge hull penetrations for system piping of NPS 1 through NPS 24 (see Note 1). Note 18212;The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such TRADITIONAL terms as nominal diameter, size, and nominal size. 1.2 The minimum pipe schedule and reinforcement dimensions presented in Tables 1-6 are based on specifications in 46 CFR, 56.50-95 and Navy Design Data Sheet 100-1. 1.3 This specification does not include sea chest penetrations. 1.4 This specification does not include penetrations in protective plating.

Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections

ASTM F994-86(2006) 向船外排水船身渗透连接件的设计与安装

1.1 This specification covers carbon steel overboard discharge hull penetrations for system piping of NPS 1 through NPS 24 (see Note 1). Note 18212;The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such TRADITIONAL terms as nominal diameter, size, and nominal size. 1.2 The minimum pipe schedule and reinforcement dimensions presented in Tables 1-6 are based on specifications in 46 CFR, 56.50-95 and Navy Design Data Sheet 100-1. 1.3 This specification does not include sea chest penetrations. 1.4 This specification does not include penetrations in protective plating.

Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections

CB* 3277-1985 船体结构 钢质护舷材

本标准适用于沿海的拖船、推船、客货船、工程船及驳船，其他船舶可参照使用。

Hull structure steel fenders

NAVY MIL-P-18066 C-1985 船舰建筑夹板

This specification covers three classes of plywood for ship and boat building and special applications.

PLYWOOD, SHIP AND BOAT CONSTRUCTION

ISO 8146:1985 造船及海上结构物 椭圆形眼板

Lays down the dimensions and materials of oval eyeplates primarily intended for mounting on ships' decks and as guy eyeplates on ships' derrick booms for cargo handling purposes.

Shipbuilding and marine structures; Oval eyeplates

CB* 3185.2-1984 船体结构 舷墙（船长小于90m）

本标准适用于船长小于90m的货船、拖船、推船和船长小于75m的渔船，其他船舶可参照使用。

Hull structure bulwarks (ship length less than 90m)

CB* 3186.2-1984 船体结构 舭龙骨（船长小于90m）

本标准适用于船长小于90m的货船、拖船、推船以及船长小于75m的渔船，其他船舶可参照使用。

Hull structure Bilge keel (less than 90m in length)

NAVY MIL-L-19140 E-1984 阻滞剂处理的木材和夹板

This specification covers requirements for fire-retardant treated lumber and plywood, including laminated veneer lumber processed by pressure impregnation, using qualified fire-retardant chemical treatments .

LUMBER AND PLYWOOD, FIRE-RETARDANT TREATED

CB 1108-1984 水面舰艇舱室照度标准

为保障明视觉作业的需要，舰艇各舱室、部位、工作面上的最低照度值如表1和表2。

Illumination standards for cabins of surface warships

NAVY MIL-M-29414-1984 水槽模块

This specification establishes the requirements for manufacture and Government acceptance of the Water Tank Module.

MODULE, WATER TANK (SIXCON)

CB* 3187-1983 船体结构 圆弧形舷缘泄水沟

本标准适用于船长大于90m且具有圆弧形舷缘的各种船舶。

Hull structure arc-shaped gunwale drain

CB* 3186.1-1983 船体结构 舭龙骨

本标准适用于船长等于或大于90m的货船，其他船舶可参照使用。

Hull Structure Bilge Keel

CB* 3181.1-1983 船体结构 节点、零部件

本标准适用于船长等于或大于90m的货船，其它船舶可参照使用。

Hull structure nodes and parts

CB* 3185.1-1983 船体结构 舷墙

本标准适用于船长等于或大于90m的货船，其他船舶可参照使用。

hull structure bulwarks