U12 船体通用结构 标准查询与下载
共找到 188 条与 船体通用结构 相关的标准，共 13 页
本标准适用于钢质船体结构。
Hull structure flow holes, ventilation holes, through welding holes
- ICS
- CCS
- U12
- 发布
- 1984-02-10
- 实施
- 1985-01-01
本标准适用于钢质船体结构。
Hull structural section end shape
- ICS
- 47.020.10
- CCS
- U12
- 发布
- 1984-02-10
- 实施
- 1985-01-01
本标准适用于船长大于和等于90米的货船船体结构，其他船舶可参照使用。
Hull structure intersecting cut and patch
- ICS
- 47.020.10
- CCS
- U12
- 发布
- 1984-02-10
- 实施
- 1985-01-01
This specification establishes the requirements for manufacture and acceptance of the Fuel Tank Module (SIXCON).
MODULE, FUEL TANK (SIXCON)
- ICS
- CCS
- U12
- 发布
- 1984
- 实施
本文件适用于各种水面战斗舰艇，登陆舰艇以及按《舰船建造规范》建造的辅助舰船。
Design method of bilge and ballast water system of surface warship
- ICS
- CCS
- U12
- 发布
- 1983-02-01
- 实施
Design Estimation Method for Submarine Seakeeping
- ICS
- CCS
- U12
- 发布
- 1983-02-01
- 实施
Calculation method for design of submarine drainage system
- ICS
- CCS
- U12
- 发布
- 1983-02-01
- 实施
本文件适用于客种水面战斗舰艇，登陆舰艇和按《舰船建造规范》建造的辅助舰船。
Design method of water fire fighting system for surface ships
- ICS
- CCS
- U12
- 发布
- 1983-02-01
- 实施
Technical requirements for the installation of ternary zinc anodes for submarine hulls
- ICS
- 47.020.10
- CCS
- U12
- 发布
- 1983-02-01
- 实施
Design method of conventional submarine rudder equipment
- ICS
- CCS
- U12
- 发布
- 1983-02-01
- 实施
本标准适用于Gu、GuT型减震橡胶接管(CB 798-79)和压力平衡式减震橡胶接管(附图1)、非平衡式减震橡胶接管(附图2)以及附录所列的金属波纹管(附图3)。
Configuration and installation technical conditions of submarine shock absorber
- ICS
- CCS
- U12
- 发布
- 1980-05-13
- 实施
Specifies the type, principal dimensions and technical requirements. Does not apply to special rubber packings intended to create heat-insulating labyrinths.
Shipbuilding; Inland navigation; Sealing rubber for covers of cargo hatches
- ICS
- 21.140
- CCS
- U12
- 发布
- 1979-06
- 实施
Specifies the main manufacturing dimensions and also the corresponding openings to be provided in bulkheads and decks. Concerns exclusively those pieces fabricated and attached by welding, to be used with flanges in accordance with ISO 2084.
Shipbuilding; Welded bulkhead pieces with flanges for steel pipework; PN 6, PN 10 and PN 16
- ICS
- 47.020.10
- CCS
- U12
- 发布
- 1978-07
- 实施
This specification covers requirements for one type and Size of body armor insert.
INSERT, BODY ARMOR
- ICS
- CCS
- U12
- 发布
- 1977
- 实施
Markings required to indicate the deck in which a hatchway is situated, the hatchway to which the beam belongs, and the position of the beam in the hatchway.
Specification for the marking of hatchway beams
- ICS
- 47.020.50
- CCS
- U12
- 发布
- 1967-12-29
- 实施
- 1967-12-29
Markings required to indicate the deck in which a hatchway is situated, the position of the hatchway in that deck, and the section of the hatchway of which the cover forms a part.
Specification for the marking of wooden hatchway covers
- ICS
- 47.020.50
- CCS
- U12
- 发布
- 1967-12-29
- 实施
- 1967-12-29
This specification covers the manufacture, assembly, preparation for delivery of the Marker, Location, Marine Mk 25 and Mods 2 and 3, and the methods of examination and tests upon which product acceptance shall be based.
MARKER, LOCATION, MARINE MK 25 AND MODS 2 AND 3
- ICS
- CCS
- U12
- 发布
- 1966-08-12
- 实施
本标准规定的贺形钢支柱适用于各种类型的水面舰艇，供加强甲板板架及甲板装置之用。
Round steel pillar type and basic size
- ICS
- CCS
- U12
- 发布
- 1962-03-28
- 实施
- 1962-05-01
