V21 管件、卡箍、密封件 标准查询与下载

SAE AS5960B-2013 航空器液压系统用400℉(204℃)、5080 psi(35000 kPa)金属编织物加固的聚四氟乙烯软管组件

This document defines the requirements for polytetrafluoroethylene (PTFE) lined, metallic braid reinforced, hose assembly suitable for use in 400 °F (204 °C), 5080 psi (35 000 kPa) aircraft hydraulic systems. NOTE: The SI metric units defined herein are soft conversion units.

Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35 000 kPa), 400 °F (204 °C), Aircraft Hydraulic Systems

SAE AIR1243C-2013 帽材密封用抗不密封设计原则

This SAE Aerospace Information Report (AIR) provides information on anti blow-by design practice for cap-strip seals. Suggestions for piston cap strip seal sidewall notch design and other anti blow-by design details are also described. It also includes information on two key investigations based on the XC-142 as part of the text and as Appendix A. The purpose of this document is to provide adequate information to the designer so that the problem will not reoccur.

Anti Blow-By Design Practice for Cap Strip Seals

SAE ARP381B-2013 带法兰轮毂.齿条式木质螺旋桨No. 10, No. 20

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Hub, Flanged - Spline Type Wood Propeller No. 10, No. 20

SAE AS4680B-2013 支管台用短非扩口和非扩口减径管联合配件

Fitting, Union, Reducer, Short Flareless and Flareless to Boss

SAE AS4676B-2013 运行中的舱壁和支管台短非扩口三通配件

Fitting, Tee, Bulkhead and Boss on Run, Short Flareless

SAE AS4677B-2013 运行中的舱壁支管台强侧短非扩口三通配件

Fitting, Tee, Bulkhead, on Run, Boss on Side, Short Flareless

SAE AS4681B-2013 短非扩口和非扩口减径管/扩充器舱壁联合配件

Fitting, Union, Reducer/Expander Bulkhead, Flareless and Short Flareless

HB/Z 75-2012 航空用小直径薄壁无缝钢管超声检测方法

本指导性技术文件规定了用局部水浸超声脉冲横波反射法对航空用小直径薄壁无缝钢管进行自动检测的一般要求、检测程序、检测记录和检测报告。本指导性技术文件适用于外径6 mm~50 mm、壁厚0.5 mm~2 mm,且壁厚与外径之比不大于0.2的冷拔/轧无缝钢管。其他相近规格的钢管和高温合金、钛合金无缝管可参照执行。

Ultrasonic testing method for small-diameter thin-wall seamless steel pipe used in aviation

SAE AS63B-2013 航空器4螺栓化油器法兰.单一桶 No. 2, 3, 4, 5, 6, 7, & 9

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Carburetor Flange, Aircraft, 4 Bolt - Single Barrel No. 2, 3, 4, 5, 6, 7, & 9

SAE AS1003H-2013 运行中的舱壁标准和减径管非扩口三通配件

Fitting, Tee, Standard and Reducer, Bulkhead on Run, Flareless

SAE J518-1-2013 液压法兰管,管道和软管连接,4-螺栓连接法兰连接.第1部分:3.5 MPa至35 MPa (代码 61)

This SAE Standard covers general and dimensional specifications for the Code 61 metric (type 1) and inch (type 2) flanged heads, flange clamps (FC & FCM), and split flange clamps (FCS & FCSM) applicable to four-screw flange type tube, pipe, and hose connections. Also, included are the recommended port dimensions and port design considerations. Type 2 (inch) flange clamps and split flanges are not for new design. The flange heads specified are incorporated into fittings having suitable means for attachment of tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial pr

Hydraulic Flanged Tube, Pipe, and Hose Connections, 4-Screw Flange Connection Part 1: 3.5 MPa to 35 MPa (Code 61)

SAE J518-2-2013 4-螺栓连接法兰液压法兰管,管件和软管连接.第2部分: 42 MPa (Code 62)

This SAE Standard covers general and dimensional specifications for the Code 62 metric (type 1) and inch (type 2) flanged heads, flange clamps (FC and FCM), and split flange clamps (FCS & FCSM) applicable to four-screw flange type tube, pipe, and hose connections. Also included are the recommended port dimensions and port design considerations. Type 2 (inch) flange clamps and split flanges are not for new design. The flange heads specified are incorporated into fittings having suitable means for attachment of tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial p

Hydraulic Flanged Tube, Pipe, and Hose Connections, 4-Screw Flange Connection Part 2: 42 MPa (Code 62)

SAE ARP820A-2012 带有Ⅱ型(-65 到 +275 ℉)O形密封圈的3000 psi液压系统设备的物理和性能试验

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This document outlines proposed test methods for the qualification of O-ring packings intended for use in aircraft hydraulic systems utilizing MIL-H-5606 fluid at rated service pressures up to 3000 psi and temperatures ranging from -65 to 275 F. It will also serve as the basis for the future preparation of a complete packing specification after basic elastomer types have been established by capability of performance.

Physical and Performance Tests for Type II (-65 to +275 °F) O-Ring Packings, 3000 psi Hydraulic Service

BS ISO 6772:2012 航空航天系列.流体系统.液压软管,管和配件装配的冲击试验

Aerospace. Fluid systems. Impulse testing of hydraulic hose, tubing and fitting assemblies

SAE AS614C-2012 液压和气动,重型,400℉,4000 psi金属加强,聚四氟乙烯软管接头

This SAE Aerospace Standards (AS) defines the requirements for heavy duty polytetrafluoroethylene (PTFE) lined, metallic reinforced, hose assemblies suitable for use in high temperature, high pressure, 4000 psi, aircraft and missile hydraulic fluid systems.

Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 400°F, Heavy Duty, Hydraulic and Pneumatic

SAE AS604E-2012 液压重量级400℉,3000 psi,金属加固,聚四氟乙烯软管接头

This Aerospace Standard (AS) defines the requirements for a heavy braid polytetrafluoroethylene (PTFE) lined, metallic reinforced, hose assembly suitable for use in high temperature, 400 °F, high pressure, 3000 psi, aircraft hydraulic fluid systems, also for use in pneumatic systems which allow some gaseous diffusion through the PTFE wall. The -20 size operating temperature is limited to 275 °F maximum.

Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Heavyweight, Hydraulic

SAE AS4667A-2012 短非扩口式保留螺母45度弯头装配

Elbow Assembly, 45 degrees, Retained Nut, Short Flareless

SAE AS1339G-2012 液压和气动轻型3000 psi, 400℉金属增强聚四氟乙烯软管组件

This Aerospace Standard (AS) defines the requirements for a lightweight polytetrafluoroethylene (PTFE) lined, metallic reinforced, hose assembly suitable for use in high temperature, 400 °F, high pressure, 3000 psi, aircraft hydraulic systems, also for use in pneumatic systems which allow some gaseous diffusion through the PTFE wall.

Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400°F, Lightweight, Hydraulic and Pneumatic

SAE AS4409B-2012 内扩和扩口管,减径管和非减径管,弯头 45°,装配总成

Fitting Assembly, Elbow 45°, Reducer and Nonreducer, Internal Flare to Flared Tube

SAE AS620G-2012 航空器中等压力高温曲聚四氟乙烯金属增强的软管组件

This SAE Aerospace Standard (AS) defines the requirements for a convoluted polytetrafluoroethylene (PTFE) lined, metallic reinforced, hose assembly suitable for use in aircraft fluid systems at temperatures of -65 to 400 degrees F and at operating pressures per Table 1.

Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft