V21 管件、卡箍、密封件 标准查询与下载

SAE AS6104-2012 37度球形扩口标准和减径管45度弯头配件

Fitting, Elbow 45 Degrees, Standard and Reducer, 37 Degrees Spherical, Flared

DIN 65229:2012 航空航天.密封垫片.技术规格.不适用于新设计

Aerospace series - Gaskets sheets - Technical specification; Inactive for new design

SAE AMS6323L-2012 0.50Cr 0.55Ni 0.25Mo(0.38-0.43C)机械钢管(SAE 8740)

This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing. This tubing has been used typically for parts, 0.375 inch (9.52 mm) and under in section thickness at time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 50 HRC when hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.

Steel, Mechanical Tubing 0.50Cr 0.55Ni 0.25Mo (0.38-0.43C) (SAE 8740)

SAE AS5951/SUP 1-2012 航空器液压系统5080 psi(35,000 kPa), 275℉(135℃),对位芳纶增强的聚四氟乙烯软管接头(补充件1)

This supplement forms a part of the Aerospace Standard AS5951, Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35,000 kPa), 275 °F (135 °C), Aircraft Hydraulic Systems, and shall be used to identify hose assembly standards citing this procurement specification.

Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35,000 kPa), 275 °F (135 °C), Aircraft Hydraulic Systems (Supplement 1)

SAE AS4468/SUP 1A-2012 饮用水用,125 psi,内衬硅树脂软管总成采购规范(补充件1)

This supplement forms a part of the Aerospace Standard AS4468, Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification. It shall be used to identify hose assembly standards that are governed by this procurement specification.

Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification (Supplement 1)

SAE AS4623/SUP 1-2012 航空器液压系统重型3000 psi, 275℉对位芳纶增强的聚四氟乙烯软管接头(补充件1)

This supplement forms a part of the Aerospace Standard AS4623, Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000 psi, 275 °F, Heavy Duty, Aircraft Hydraulic Systems, and shall be used to identify hose assembly standards citing this procurement specification.

Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000 psi, 275 °F, Heavy Duty, Aircraft Hydraulic Systems (Supplement 1)

SAE AS1946/SUP 1A-2012 液压和气胎多达1500 psi and 450℉金属增强聚四氟乙烯软管接头(补充件1)

This supplement forms a part of the Aerospace Standard AS 1946, Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, up to 1500 psi and 450 °F, Hydraulic and Pneumatic, and shall be used to identify hose assembly standards citing this procurement specification.

Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450°F, Hydraulic and Pneumatic (Supplement 1)

SAE AS5960/SUP 1-2012 航空器液压系统用5080 psi(35,000 kPa),400℉(204℃),金属编织增强的聚四氟乙烯软管接头(补充件1)

This supplement forms a part of the Aerospace Standard AS5960, Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35,000 kPa), 400 °F (204 °C), Aircraft Hydraulic Systems, and shall be used to identify hose assembly standards citing this procurement specification.

Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35,000 kPa), 400 °F (204 °C), Aircraft Hydraulic Systems (Supplement 1)

SAE AS5420/SUP 1-2012 饮用水用内衬硅树脂125 psig软管总成采购规范(补充件1)

This supplement forms a part of the Aerospace Standard AS 5420, Hose Assembly, Heated 125 psig, Lined Silicone Potable Water, Procurement Specification, and shall be used to identify hose assembly standards citing this procurement specification.

Hose Assembly, Heated 125 psig, Lined Silicone Potable Water, Procurement Specification (Supplement 1)

DIN 65202:2012 航空航天系列.弹性O型圈.尺寸规格.德文和英文文本

Aerospace series - Elastomeric O-rings - Dimensions; Text in German and English

BS EN 2997-003:2012 航空航天系列.连续工作温度为-65℃～175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接的圆形电连接器.方形法兰插座.产品标准

Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak. Square flange receptacle

BS EN 2997-005:2012 航空航天系列.连续工作温度为-65℃～175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接圆形电连接器.密封矩形法兰插座.产品标准

Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65°C to 175°C continuous, 200°C continuous, 260°C peak. Hermetic square flange receptacle. Product standard

SAE AS6044A-2012 精密型无闪光标准管和减径管弯头90度配件

Fitting, Elbow 90 Degree, Standard and Reducer, Flareless, Precision type

SAE AS5813A-2012 管.电加热空速管

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Tube - Pitot, Electrically Heated

SAE AS6043A-2012 精密型无间隙,标准和减径管,在使用中的闷头三通配件

Fitting, Tee, Standard and Reducer, Bulkhead on Run, Flareless, Precision Type

SAE AS4668B-2012 短法兰90°弯头配件

Fitting, Elbow, 90 degrees, Short Flareless

SAE AS17852A-2012 氧气压力异径接头

This specification covers the requirements for two types of oxygen pressure reducers.

Reducers, Oxygen Pressure

SAE AMS7322F-2012 翻砂毛胚80Cu 19Sn铸锡青铜密封环材

This specification covers a cast tin bronze in the form of sealing rings. This product has been used typically for oil seal rings, but usage is not limited to such product.

Rings, Sealing, Cast Tin Bronze 80Cu 19Sn As Cast

SAE J188-2012 高容积膨胀型动力转向压力软管

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This document covers two types of hose fabricated from fabric braid and synthetic rubber, assembled with end fittings for use in automotive power steering applications as flexible connections within the temperature range of -40 degrees C to +120 (-40 degrees F to +250 degrees F) average, 135 degrees C (250 degrees F) maximum peaks. These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsations is required. Type 1 hose shall be suitable for 10.3 MPa (1500 psi) maximum working pressure. Type 2 hose shall be suitable for 10.3 MPa (1500 psi) maximum working pressure.

Power Steering Pressure Hose - High Volumetric Expansion Type (Stabilized Type)

SAE AS3085A-2012 预成型包装.AMS 7280.O型环

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Packing, Preformed - AMS 7280 - O Ring