共找到 149 条与 特种车辆 相关的标准,共 10 页
本标准规定了旅客登机桥的分类、典型结构、技术要求、试验方法、检验规则以及标志、包装、运输、贮存等。 本标准好似用于轮式、柱座式及其他特殊型式的旅客登机桥,对于连接旅客登机桥与航站楼的固定桥也可参照使用。
Passenger boarding bridge
This International Standard specifies minimum requirements for dimensions and unobstructed space around main-deck passenger doors of future types of civil-passenger transport aircraft when they are intended to be compatible with the thousands of passenger-boarding bridges and passenger transfer vehicles existing, or being planned, in airports worldwide. This International Standard is not applicable to existing models of civil transport aircraft, or derivative models with the same fuselage, for which the aircraft mating section of passenger-boarding bridges or passenger transfer vehicles should be made compatible according to ISO 16004. It is not the intent of this International Standard to restrict in any way the basic design of any future types of civil-passenger transport aircraft. However, it aims at clarifying, for aircraft-design engineers, the design characteristics which would make it difficult or impossible for a new type of aircraft to adequately connect with existing airport passenger-boarding bridges or passenger transfer vehicles. If basic aircraft-design requirements impose, on a future model, certain dimensional characteristics not complying with this International Standard, it should be noted that: — either alternative methods of embarking/disembarking passengers will have to be implemented, such as integral aircraft stairs, etc.; — or existing passenger-boarding bridges and/or passenger transfer vehicles in the airports where such a new type of aircraft is to operate will require some degree of modification/reworking; — or additional interface devices/equipment will be required in order to connect such a new type of aircraft with existing passenger-boarding bridges and passenger transfer vehicles; in each case resulting in increased aircraft-handling constraints and operating cost.
Aircraft - Main-deck passenger doors - Interface requirements for connection with passenger-boarding bridge or transfer vehicle
To list the documentation required to ensure inspection, maintenance and calibration of the TLTVs aircraft NLG steering and tractive protection systems or alerting devices can be carried out in accordance with the requirements of this document and the referenced standards. To specify inspection, maintenance and calibration requirements and procedures. To specify special tools requirements. To specify training requirements. To specify recording, traceability and acountability requirements.
TLTV - Aircraft NLG Steering and Tractive Force Protection Systems or Alerting Devices - Inspection, Maintenance and Calibration Requirements
A-A-59212, dated 18 May 1998, has been reviewed and determined to be valid for use in acquisition
WINCHES, DRUMS, POWER-OPERATED, DIESEL-ENGINE-DRIVEN
This document is a guideline for the design of an Aviation Aircraft Refueling and Defueling Tanker Vehicle and for the materials and components used thereon. The criteria set forth herein are the minimum recommendations and are limited to aircraft refueling vehicles for airport operations with operating fuel pressures and flow rates as specified within this document.
Design and Operation of Aircraft Refueling Tanker Vehicles
A-A-52430, dated 15 February 1993, is hereby reinstated and may be used for acquisition.
PADS, CUSHIONING: PERSONNEL-PROTECTION, VEHICULAR (METRIC)
MIL-F-40047C, dated 1 November 2000, is hereby reactivated and may be used for either new or existing design acquisition
FLAG, SIGNAL, RED, VEHICLE, DANGER
この規格は,航空機に用いる一般用プッシュプル単極サーキットブレーカの寸法を規定する。
Aircraft -- General purpose push-pull single-pole circuit-breakers -- Dimensions
This commercial item description covers brown kraft paper used for general wrapping applications.
FLAG, SIGNAL, RED, VEHICLE, DANGER
本标准规定了飞机牵引车的技术要求、试验方法、检验规则及包装、标志、贮运。 本标准适用于在机场范围内牵引或顶推飞机的、内燃机驱动的有杆式飞机牵引车。
Aircraft tow tractors
本标准规定了为各类民用运输飞机服务的飞机清水车(以下简称清水车)的技术要求、试验方法、检验规则、标志、运输和贮存。 本标准适用于采用各类汽车底盘改装的清水车。
Aircraft potable water vehicle
本标准规定了为各类民用运输飞机服务的飞机污水车的技术要求、试验方法、检验规则、标志、运输及贮存。 本标准适用于采用各类汽车底盘改装的污水车。
Aircraft sewage disposal vehicle
本标准规定了为各类民用疏运飞机配餐服务的飞机食品车(以下简称食品车)的定义、技术要求、试验方法、检验规则、标志、运输及贮存。 本标准适用于采用各类汽车底盘改装的食品车。
Aircraft catering vehicle
This Commercial Item Description (CID) describes the requirements of synthetic decking made from Ultra High Molecular Weight Polyethylene (UHMWPE).
DECKING, SYNTHETIC
This notice should be filed in front of MS90908B(AT), dated 10 December 1982.
FILLER TUBE, FUEL TANK - MILITARY VEHICLES
This notice should be filed in front of MS53075B, dated 3 August 1990.
CAP, FUEL TANK-TACTICAL VEHICLE, NON-VENTED
This notice should be filed in front of MS35644F, dated 25 November 1986.
FILLER NECK: FUEL TANK-MILITARY VEHICLES
This notice should be filed in front of MS51300E(AT), dated 13 June 1990.
CAP, FUEL TANK: COMBAT VEHICLE, SPILL-PROOF
The General Services Administration has authorized the use of this commercial item description, for all federal agencies. 1. SCOPE. This commercial item description covers integrally constructed diesel-engine-driven winches with pneumatic controls for general marine and shoreline service. 2. CLASSIFICATION. The winches covered
WINCHES, DRUMS, POWER-OPERATED, DIESEL-ENGINE-DRIVEN
This CID covers wheel rings for pneumatic tire wheels for wheeled tactical vehicles.
RING, SIDE, AUTOMOTIVE WHEEL FOR TACTICAL WHEELED VEHICLES [Superseded: ARMY MS53045 REV A CANC NOTICE 3, ARMY MS53045 REV A VALID NOTICE 2, ARMY MS53045 REV A VALID NOTICE 1, ARMY MS53045 REV A, ARMY MS53045]
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号