Y73 日用五金制品 标准查询与下载

QB/T 5040-2017 Y形金属丝

Y-shaped wire

SN/T 4511-2016 进出口小型喷射型点火枪安全要求及测试方法

Safety requirements and test methods for small spray type ignition guns for import and export

DB44/T 1836-2016 不锈钢美容工具

本标准规定了不锈钢美容工具的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于以不锈钢为主体的日用美容工具。

Stainless Steel Grooming Tools

DB37/T 993-2015 银质内胆杯具

Silver liner cup

QB/T 4902-2016 金属垃圾箱

本标准规定了金属垃圾箱的术语和定义、型号命名方法、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于工作单位、物业小区、家庭和酒店客房等场所，有效容积不大于200 L的金属垃圾箱。 类似的非金属垃圾箱可参照使用。 本标准不适用于有效容积大于200 L的垃圾桶、垃圾斗、垃圾集装箱等金属垃圾箱。

Metal waste container

GOST 33748-2016 深拉易开盖铝罐. 通用规格

Aluminum cans of deep drawing with easy open end. General specifications

EN 16732:2015 拉链(拉链).规范

This European Standard specifies performance levels and test methods for the following characteristics of slide fasteners made from interlocking components mounted on tapes: strengths of puller attachment, closed-end, top stop, open-end slide fastener box, reciprocating mechanism, closed slide fastener when extended laterally, open-end attachment when extended laterally, slider locking device, and open-end slide fastener single stringer slider retention and slider resistance to torque. NOTE The tests specified in Annexes B to K have been specifically devised to permit their direct application to finished slide fasteners with a view to giving the user reasonable assurance that a slide fastener conforming to the requirements of this standard can satisfactorily fulfil its intended purpose. Annex L gives information about sampling procedures for bulk quantities of slide fasteners. In addition, performance levels are also specified for colour fastness to washing, dry cleaning and water, and for dimensional stability to washing and dry cleaning. This European Standard is applicable to slide fasteners for general use and is not applicable to slide fasteners for specialist purposes (for example: pressure sealed slide fasteners for diving suits).

Slide fasteners (zips) - Specification

QB/T 4856-2015 不锈钢果蔬刨 通用要求

本标准规定了不锈钢果蔬刨的术语和定义、分类和型号命名、要求、试验方法、检验规则及标志、使用说明、包装、运输和贮存。 本标准适用于以不锈钢材料为功能主体的果蔬刨。

Stainless steel grater.General requirements

QB/T 1621-2015 家具锁

本标准规定了家具锁的术语和定义、产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于各类家具用机械锁。

Furniture lock

SN/T 0746-2015 进出口不锈钢制品检验规程

本标准规定了进出口不锈钢制品的合格评定程序及要求。 本标准适用于与食品接触的不锈钢制品的合格评定活动。

Rules for the inspection of stainless steel products for import and export

DB44/T 1376-2014 金属和混合眼镜架磨损的模拟方法和镍释放量的检测方法

本标准规定了金属和混合眼镜架镍释放量的检测方法以及为测定非镍镀层的金属和混合眼镜架的镍释放量而预先采用的磨损和腐蚀的模拟方法。 本标准的目的是控制眼镜架在制造和表面处理时所用材料的镍释放量，以避免镍对人体的伤害。

Method for simulation of wear of metallic and hybrid spectacle frames and detection of nickel release

QB/T 2172-2014 注塑拉链

本标准规定了注塑拉链的术语和定义、分类、要求、测试条件、试验方法、检验规则和标志、包装、运输、贮存、使用准则。本标准适用于注塑拉链(以下简称拉链),不适用于特种拉链。

Derlin zipper

QB/T 2173-2014 尼龙拉链

本标准规定了尼龙拉链的术语和定义、分类、要求、测试条件、试验方法、检验规则和标志、包装、运输、贮存、使用准则。本标准适用于尼龙拉链(以下简称“拉链”),不适用于特种拉链。

Nylon zipper

QB/T 2171-2014 金属拉链

本标准规定了金属拉链的术语和定义、分类、要求、测试条件、试验方法、检验规则和标志、包装、运输、贮存、使用准则。本标准适用于金属拉链(以下简称“拉链”),不适用于特种拉链。

Metal zipper

DB50/T 261-2014 菜刀

本标准规定了菜刀的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于以碳素复合钢、碳素不锈复合钢及不锈钢等为原料加工制成的菜刀。

kitchen knife

JIS S 2010:2013 铝制厨房用具

This Standard specifies aluminium cookwares which are mainly used in households (hereafter referred to as "cookwares"). However,the following are excluded. a)Cookware of which the whole body has multilayer structure with dissimilar metal. b)Cookware without a handle or that with a detachable handle. c)Cookware for a special purpose and that having special shape. d)Cookware whose inner surface of the body is processed with coating,etc. other than anodic oxide treatment or fluororesin film.

Aluminium cookwares

DIN 81321:2013 搭扣和锁环

Hasp and staple

UL 437-2013 钥匙锁

UL Standard for Safety Key Locks (Eighth Edition; Reprint with Revisions Through and Including October 24@ 2017)

DIN 81319:2013 带弹子锁的活动门插锁

Click for trapdoors with mortise-lock

ANSI/BHMA A156.1-2013 合页和铰链标准

Standard for Butts and Hinges