CSA N292.4-2023
放射性废物和辐照燃料的储存

Storage of radioactive waste and irradiated fuel


标准号
CSA N292.4-2023
发布
2023年
发布单位
SCC
当前最新
CSA N292.4-2023
 
 
适用范围
  Full Description Preface  This is the first edition of CSA N292.4, Storage of radioactive waste and irradiated fuel . This Standard is part of the CSA N292 series of Standards on radioactive waste management.  This Standard is a consolidation of and replaces CSA N292.1, Wet storage of irradiated fuel and other radioactive materials, and CSA N292.2, Interim dry storage of irradiated fuel. In addition to the contents of those two Standards, this Standard draws on clauses developed for CSA N292.7, Deep geological disposal of radioactive waste and irradiated fuel, where relevant, to ensure that the entire lifecycle of facilities that include storage of radioactive waste or irradiated fuel is covered in this Standard. This includes, but is not limited to, adding requirements and guidance on engagement, site evaluation, monitoring and surveillance, site preparation, construction, and commissioning.  This Standard works in concert with CSA N292.0, General principles for the management of radioactive waste and irradiated fuel, which specifies common requirements for the management of radioactive waste or irradiated fuel.  The CSA N-Series Standards provide an interlinked set of requirements for the management of nuclear facilities and activities. CSA N286 provides overall direction to management to develop and implement sound management practices and controls, while the other CSA Group nuclear Standards provide technical requirements and guidance that support the management system. This Standard works in harmony with CSA N286 and does not duplicate the generic requirements of CSA N286; however, it might provide more specific direction for those requirements.  This Standard draws on the experience both in Canada and internationally in storage of radioactive waste, irradiated fuel, or other radioactive materials and reflects current best practices.  Users of this Standard are reminded that the design, manufacture, construction, commissioning, operation, and decommissioning of nuclear facilities in Canada are subject to the provisions of the Nuclear Safety and Control Act and its supporting Regulations.  This Standard was prepared by the Subcommittee on Storage of Radioactive Waste and Irradiated Fuel, under the jurisdiction of the Technical Committee on Radioactive Waste Management and the Strategic Steering Committee on Nuclear Standards, and has been formally approved by the Technical Committee. Scope  1.1 Storage facilities and storage areas  1.1.1 Storage of radioactive waste or irradiated fuel  This Standard specifies requirements for standalone storage facilities and areas within other facilities dedicated to storage of  a) radioactive waste; or  b) irradiated fuel.  Notes:  1) This includes waste management facilities built within or adjacent to nuclear power plant (NPP) sites, research reactors, and portions thereof that are dedicated to storage of radioactive waste or irradiated fuel.  2) This Standard may be used as guidance for other facilities that house areas for storage of radioactive waste or irradiated fuel, such as research facilities, medical facilities, isotope production facilities, manufacturing facilities, processing facilities, laboratories, or industrial facilities.  3) Storage occurs either in a dry medium, such as in dry storage containers or storage buildings, or in a wet medium, such as in wet storage bays.  4) In this Standard, a) the term “storage system” refers to both standalone storage facilities and storage areas within other types of facilities; and  b) the term “storage facility” refers to standalone facilities for storage of radioactive waste or irradiated fuel, but can generally be considered synonymous with “storage system”.  1.1.2 Wet storage of other radioactive materials  The requirements in this Standard also pertain to wet storage of other radioactive materials requiring shielding or decay heat dissipation.  Notes:  1) In this Standard, the term “other radioactive materials” refers to radioactive materials other than irradiated fuel (e.g., sealed sources).  2) Unless specified, the clauses in this Standard apply to radioactive waste, irradiated fuel, and other radioactive materials.  1.1.3 Storage of damaged or defective irradiated fuel  This Standard includes requirements for storage of damaged or defective irradiated fuel.  Note: For dry storage of damaged or defective fuel, there can be additional processing and packaging requirements that are not detailed in this Standard.  1.1.4 On-site transfer  This Standard includes requirements for on-site transfer of radioactive waste, irradiated fuel, or other radioactive materials  a) from wet storage to dry storage; and b) within a storage system.  1.2 Lifecycle activities  This Standard specifies the requirements for the following activities that occur during the lifecycle of a storage facility:  a) Indigenous, public, and stakeholder engagement (see Clause 5);  b) site evaluation (see Clause 6);  c) design (see Clause 7);  d) monitoring and surveillance (see Clause 8);  e) safety assessment (see Clause 9);  f) site preparation (see Clause 10);  g) construction (see Clause 11);  h) commissioning (see Clause 12);  i) operation (see Clause 13); and  j) decommissioning (see Clause 14).  Note: Decommissioning of storage facilities and other facilities containing nuclear substances is subject to the requirements in CSA N294.  1.3 Exclusions  This Standard excludes requirements for  a) siting of a storage facility, apart from siting-related aspects during the lifecycle activities of Indigenous, public, and stakeholder engagement; site evaluation; design; and safety assessment;  b) other items that might be stored within the storage system;  Note: Examples of such items include tools.  c) wet source storage gamma irradiators;  Note: Wet source storage gamma irradiators are designed and licensed in accordance with ANSI/HPS N43.10 and IAEA Specific Safety Guide No. SSG-8.  d) off-site transport of radioactive waste, irradiated fuel, or other radioactive materials, including storage during transport, to or from a storage system;  Note: For the off-site transportation of radioactive materials, see the Packaging and Transport of Nuclear Substances Regulations.  e) site evaluation during decommissioning; and  f) uranium mine and mill tailings.  1.4 CSA N292.0  This Standard is used in conjunction with CSA N292.0.  1.5 Users  This Standard applies to waste organizations or facilities associated with storage of radioactive waste, irradiated fuel, or other radioactive materials, as defined in Clause 1.1.  Note: Waste organizations can refer to waste generators, waste brokers, waste receivers, waste processors, and the operating organizations of waste management facilities.  1.6 Terminology  In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.  Notes to tables and figures are considered part of the table or figure and may be written as requirements.  Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

CSA N292.4-2023相似标准


推荐

关于放射性检测仪检测气体来源

  对环境造成放射性污染的人工污染源除了医用射线源、核试验产生放射性沉降以及核能工业各种放射性废物外,还包括设有辐射源各种装置与设备等。医用射线一般占人工污染源94%,占所有射线总量30%。因此,对医用射线污染源监控是放射性污染源监控主体。核能工业包括核燃料开采、反应堆运行辐照燃料回收等,在这些过程中都会产生放射性污染。...

放射性检测仪主要来源

  对环境造成放射性污染的人工污染源除了医用射线源、核试验产生放射性沉降以及核能工业各种放射性废物外,还包括设有辐射源各种装置与设备等。医用射线一般占人工污染源94%,占所有射线总量30%。因此,对医用射线污染源监控是放射性污染源监控主体。核能工业包括核燃料开采、反应堆运行辐照燃料回收等,在这些过程中都会产生放射性污染。...

十二五核安全及污染防治重点项目投资约800亿元

其中,核安全改进工程包括核电厂安全、研究堆燃料循环设施安全、辐射防护改造工程项目;放射性污染治理工程包括核设施退役及放射性污染废物治理、区域废物处置场建设、铀矿地址勘探与矿冶设施项目、伴生矿尾矿(渣)坝监测预警系统示范项目、辐照装置退役及放射源回收项目等。...

放射性废物处置遇技术难关

放射性废物来源   地质勘探、铀矿开采、选矿矿石   含有铀、镭其他天然放射性核素铀矿山废石、尾矿水冶厂尾砂,放射性水平较低   铀精制、转化、同位素分离燃料元(组)件制造   含铀坑道废水、选矿水等   核电厂其反应堆运行   含活化产物裂变产物中、低放射性废物固体废物及卸出燃料   核燃料后处理厂运行   含裂变产物锕系元素高放射性废液废物   ...


储存 测试方法


/

ASTM RR-D02-1598 2003 D5304-通过氧气超压评估中间馏分燃料储存稳定性的测试方法 DIN 55657 E:2012-08 涂料和清漆 采用利用冷凝试验或糊剂储存施加附加应力的剥离试验, 剥离强度试验和拉伸搭接剪切强度试验评估涂层上弹性胶粘剂的试验方法 DIN 55657 E:2016-04 涂料和清漆 采用利用冷凝试验或糊剂储存施加附加应力的剥离试验, 剥离强度试验和拉伸搭接剪切强度试验评估涂层上弹性胶粘剂的试验方法 DIN EN 16806-1 E:2014-12 纺织品和纺织品 含有相变材料(PCM)的纺织品 第1部分:热储存和释放能力的测定(草案) DIN CEN/TS 17188:2018*DIN SPEC 78002:2018 从报废轮胎(ELT)中获得的材料 大袋中储存的颗粒和粉末的取样方法 DIN EN ISO 21043-2 E:2019-11 法医学 第2部分:物品的识别、记录、收集、运输和储存(草案) DIN 54056:1968 纺织品色牢度测试 染色和印花储存升华色牢度的测定 DIN EN 1300 E:2011-10 安全储存装置 根据高安全性锁抵抗非法开启的性能对锁分类(草案) AS 5388.1:2012/Amdt 1:2017 法医分析-材料的识别、记录、回收、运输和储存 DIN EN ISO 21043-2 E:2017-09 法医学 第2部分:物品的识别、记录、收集、运输和储存(草案) AS/NZS 1462.26:2003/AMD 1:2003 塑料管及配件测试方法 外部储存用塑料管的耐老化测定 DIN EN ISO 11987 E:2011-02 眼科光学 接触镜 储存寿命的测定(草案) DIN EN 60749-6 E:2016-09 半导体器件机械和气候测试方法第6部分:高温储存(草案) DIN EN ISO 13212 E:2013-05 眼科光学 接触镜保护产品 储存寿命的测定指南(草案) DIN EN 1862:1997 玻璃纤维增强热固性塑料 (GRP) 制成的管道 DIN 在化学环境中储存后弯曲时的相对蠕变系数的测定 DIN EN 1429:1999 沥青和沥青结合料 沥青乳液筛分残留物的测定和筛分储存稳定性的测定 SEMI E146-0306-2006 测定用于储存和运输硅片的微环境中的颗粒污染的测试方法 AATCC TM163-2013(2020)e4-2023 储存色牢度的测试方法:染料转移

AENOR

UNE 55539-1:1994 表面活性剂 用于表面活性剂和含有它们的制剂的体积分析中使用的标准溶液的制备、标准化和储存方法 第1部分:一般规定 UNE 55539-2:1994 表面活性剂 用于表面活性剂和含有它们的制剂的体积分析中使用的标准溶液的制备、标准化和储存方法 第2部分:氢氧化钠溶液,浓度介于 UNE 55539-3:1994 表面活性剂 用于表面活性剂和含有它们的制剂的体积分析中使用的标准溶液的制备、标准化和储存方法 第3部分:浓度介于两者之间的盐酸溶液 UNE 55539-9:1994 表面活性剂 用于表面活性剂和含有它们的制剂的体积分析中使用的标准溶液的制备、标准化和储存方法 第9部分:浓度为 0.02 的高锰酸钾溶液 UNE 55539-10:1994 表面活性剂 用于表面活性剂和含有它们的制剂的体积分析中使用的标准溶液的制备、标准化和储存方法 第10部分:重铬酸钾溶液,浓度 1/60 UNE 55539-7:1994 表面活性剂 用于表面活性剂和含有它们的制剂的体积分析中使用的标准溶液的制备、标准化和储存方法 第7部分:浓度为 0.05 MOL/L 的碘溶液 UNE 55539-6:1994 表面活性剂 用于表面活性剂和含有它们的制剂的体积分析中使用的标准溶液的制备、标准化和储存方法 第6部分:浓度为 0.1 M 的硫氰酸铵溶液 UNE 55539-4:1994 表面活性剂 用于表面活性剂和含有它们的制剂的体积分析中使用的标准溶液的制备、标准化和储存方法 第4部分:硫酸溶液,浓度在 0, UNE 55539-8:1994 表面活性剂 用于表面活性剂和含有它们的制剂的体积分析中使用的标准溶液的制备、标准化和储存方法 第8部分:浓度为 0.1 MOL 的硫代硫酸钠溶液 UNE 55539-5:1994 表面活性剂 用于表面活性剂和含有它们的制剂的体积分析中使用的标准溶液的制备、标准化和储存方法 第5部分:硝酸银溶液,浓度为 0.1 MOL/L UNE 55539-11:1994 表面活性剂 用于表面活性剂和含有它们的制剂的体积分析中使用的标准溶液的制备、标准化和储存方法 第11部分:氢氧化钠的甲醇溶液,浓度 UNE 55539-13:1995 表面活性剂 用于表面活性剂和含有它们的制剂的体积分析中使用的标准溶液的制备、标准化和储存方法 第13部分:乙二腈-四乙酸二钠溶液(E UNE 55539-12:1995 表面活性剂 用于表面活性剂和含有它们的制剂的体积分析中使用的标准溶液的制备、标准化和储存方法 第12部分:浓度为 0 的高氯酸醋溶液 UNE 55539-14:1995 表面活性剂 用于表面活性剂和含有它们的制剂的体积分析中使用的标准溶液的制备、标准化和储存方法 第14部分:具有缓冲 PH 值的标准溶液 UNE-EN 12701:2002 结构粘合剂 储存 与结构粘合剂和相关材料的产品寿命有关的词和短语的测定 UNE-EN 60749-6:2003 半导体器件 机械和气候试验方法 第6部分:高温储存 UNE-EN 14395-1:2005 有机材料对供人类消费的水的影响 储存系统中水的感官评估 第1部分:测试方法 UNE-EN 14498:2005 混凝土结构保护和修复用产品和系统 试验方法 空气干燥和水储存循环后注射产品的体积和重量变化 UNE-EN ISO 16000-11:2006 室内空气 第11部分:建筑产品和家具中挥发性有机化合物排放的测定 取样、样品储存和试样制备(ISO 16000-11:2006) UNE-EN 15659:2010 安全储存装置 耐火性的分类和试验方法 轻火储存装置 UNE-EN 13399:2010 沥青和沥青粘合剂 改性沥青储存稳定性的测定 UNE-EN 13575:2012 用于化学品地上储存的静态热塑性塑料罐 吹塑或旋转模塑聚乙烯罐 要求和测试方法 UNE 135124:2012 车辆约束的金属安全屏障 处理和储存条件 安装程序和控制方法 UNE-EN 61427-1:2013 可再生能源储存用二次电池和蓄电池组 一般要求和试验方法 第1部分:光伏离网应用 UNE-EN 1429:2013 沥青和沥青粘合剂 沥青乳液筛分残留物的测定,以及通过筛分测定储存稳定性

德国标准化学会

DIN EN 976-1:1997-09 玻璃增强塑料(GRP)地下储罐 - 用于非压力储存液体石油燃料的卧式圆柱形储罐 - 第 1 部分:单壁储罐的要求和试验方法 DIN EN 12701:2001-12 结构粘合剂 - 储存 - 与结构粘合剂和相关材料的产品寿命相关的单词和短语的测定 DIN EN 14498:2004-12 用于保护和修复混凝土结构的产品和系统 测试方法 空气干燥和水储存循环后注射产品的体积和重量变化 DIN EN 14395-1:2005-01 有机材料对人类消费水的影响 储存系统中水的感官评估 第1部分:测试方法 DIN EN ISO 16000-11:2006-06 室内空气 第11部分:建筑产品和家具中挥发性有机化合物排放量的测定 样品的取样、储存和测试样品的制备 DIN 51471:2010-01 液体石油产品 燃料油 EL 储存稳定性的测定 DIN EN 13575:2012-06 用于地上储存化学品的静态热塑性储罐 吹塑或旋转成型聚乙烯储罐 要求和测试方法 DIN EN 1429:2013-08 沥青和沥青粘合剂 沥青乳液筛分残留物的测定 以及筛分储存稳定性的测定 DIN EN 16806-1:2016 纺织品和纺织品 含有相变材料(PCM)的纺织品 第1部分:热储存和释放能力的测定;德文版 EN 16806-1:2016 DIN 55657:2016 涂料和清漆. 采用利用冷凝试验或糊剂储存施加附加应力的剥离试验, 剥离强度试验和拉伸搭接剪切强度试验评估涂层上弹性胶粘剂的试验方法 DIN EN 17150:2017 非饮用水地下非压力输送和储存用塑料管道系统 箱体短期抗压强度测定的试验方法 DIN EN 17151:2017 非饮用水地下非压力输送和储存用塑料管道系统 箱子长期抗压强度测定的试验方法




Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号