In addition to the following provisions, this chapter of GB 15092.1-2003 applies: 1.1 is changed to read: Independently installed switches (mechanical or electronic) with a rated voltage not greater than 480V and a rated current not greater than 63A. This type of switch is intended to be operated by a person via an actuator or by actuating a sensor. The actuator or sensor can be physically or electrically integrated with the switch, or it can be configured separately, and may also include signal transmission between the actuator or sensor and the switch, for example, electrical, optical, acoustic or Temperature signal transmission. Switches with additional control functions required by the on and off functions fall within the scope of this standard. This standard also includes indirectly actuated switches, when the operation of the actuator or sensor is achieved by a remote control, not part of the appliance or equipment (such as a door). 1.2 This article of GB 15092.1-2003 does not apply. 1.3 This article of GB 15092.1-2003 applies. 1.4 This article of GB 15092.1-2003 is not applicable.
GB 15092.4-2006 Referenced Document
GB 5023.3-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 3: Non-sheathed cables for fixed wiring
GB 15092.4-2006 history
2023GB/T 15092.4-2023 Appliance switches - Part 2-4: Particular requirements for individually mounted switches
2006GB 15092.4-2006 Switches for appliances Part 2: Particular requirements for independently mounted switches
1999GB 15092.4-1999 Switches for appliances. Part 2: Particular requirements for independently mounted switches