GB 15092.2-2014 (English Version) Switches for appliances.Part 2:Particular requirements for cord switches

Standard No.: GB 15092.2-2014
Language: Chinese, Available in English version
Release Date: 2014
Published By: General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Status: Be replaced 2024-03
Replace By: GB/T 15092.2-2023
Latest: GB/T 15092.2-2023
Replace: GB 15092.2-1994

Scope: This chapter of GB 15092.1-2010 applies after making the following changes: 1.1 Replacement: This part specifies that the switch must be operated by a person through an actuator, or by an excitation sensor. The actuator or sensor may be physically or electrically integrated with the switch or configured separately, and may also include signal transmission between the actuator or sensor and the switch, for example, electrical, optical, acoustic or Temperature signal transmission. Switches with additional control functions subject to the requirements of the switch fall within the scope of this standard. This section also includes indirectly actuated switches, when the operation of the actuator or sensor is achieved by a remote control, appliance or part of the equipment (such as a door). This standard applies to cord switches (mechanical or electronic) with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A, intended for household and similar appliances and equipment, and actuated by hand, foot or other human actions , hereinafter referred to as the switch). 1.2 Replacement: This section applies to switches connected to flexible cords. 1.3 This article of GB 15092.1-2010 applies. 1.4 This article of GB 15092.1-2010 does not apply.

GB 15092.2-2014 Referenced Document

2023 GB/T 15092.2-2023 Appliance switches - Part 2-1: Particular requirements for cord switches
2014 GB 15092.2-2014 Switches for appliances.Part 2:Particular requirements for cord switches
1994 GB 15092.2-1994 Switches for appliances. Part 2:Particular requirements for cord switches