GB/T 19520.4-2004
Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 4:Subracks and associated plug-in units-Additional dimensions (English Version)

GB/T 19520.4-2004

Standard No.: GB/T 19520.4-2004
Language: Chinese, Available in English version
Release Date: 2004
Published By: General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Status: Be replaced 2009-12
Replace By: GB/T 19520.12-2009; GB/T 19520.13-2009
Latest: GB/T 19520.12-2009; GB/T 19520.13-2009

Scope: This section is related to the 482.6 mm (19 in) series of equipment structures, in which plug-ins with or without plug-in connectors adopt connectors in accordance with GB/T 15157.2. This standard intends to ensure mechanical interchangeability and intermateability between inserts and subracks. Subracks and inserts need not correspond to the schematic diagrams of this standard, but the specified dimensions shall be used. The manufacturer is free to select unspecified dimensions and tolerances as required. The purpose of this standard is to ensure the dimensions and details of the active surfaces of printed boards, inserts, interposers and subrack interposers. Printed boards and plug-ins use connectors that comply with GB/T 15157.2.

GB/T 19520.4-2004 history

2009 GB/T 19520.12-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-101:Subracks and associated plug-in units
2004 GB/T 19520.4-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 4:Subracks and associated plug-in units-Additional dimensions

GB/T 19520.4-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 4:Subracks and associated plug-in units-Additional dimensions was changed to GB/T 19520.12-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-101:Subracks and associated plug-in units.

GB/T 19520.4-2004 -All Parts

GB/T 19520.1-2007 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482.6mm(19in)series Part 1: Panels and racks GB/T 19520.10-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-105:Subracks and associated plug-in units-Alignment and/or earth pin GB/T 19520.11-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-107:Subracks and associated plug-in units-Rear mounted plug-in units GB/T 19520.12-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-101:Subracks and associated plug-in units GB/T 19520.13-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-102:Injector/extractor handle GB/T 19520.14-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-103:Keying and alignment pin GB/T 19520.15-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-104:Connector dependent interface dimensions of subracks and plug-in units GB/T 19520.16-2015 Mechanical structures for electronic equipment.Dimension of mechanical structures of the 482.6 mm (19 in) series.Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets GB/T 19520.17-2010 Mechanical structures for electronic equipment.Dimension of mechanical structures of the 482.6 mm (19 in) series.Part 3-105:Dimensions and design aspects for 1U high chassis GB/T 19520.18-2018 Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1 GB/T 19520.19-2020 Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-107: Dimensions of subracks and plug-in units, small form factor GB/T 19520.2-2007 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482.6mm(19in)series Part 2: Cabinets and pitches of rack structures GB/T 19520.20-2023 Mechanical construction of electrical and electronic equipment 482.6 mm (19 in) series mechanical construction dimensions Part 3-108: Dimensions of R-type sub-boxes and plug-ins GB/T 19520.21-2023 Mechanical dimensions of electrical and electronic equipment 482.6 mm (19 in) series mechanical dimensions Part 3-109: Chassis dimensions of embedded computing devices GB/T 19520.22-2023 Mechanical Structure of Electrical and Electronic Equipment 482.6 mm (19 in) Series Mechanical Structure Dimensions Part 3-110: Residential Racks and Cabinets for Smart Homes GB/T 19520.3-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 3:Subracks and associated plug-in units GB/T 19520.4-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 4:Subracks and associated plug-in units-Additional dimensions GB/T 19520.5-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-100:Subracks and associated plug-in units-Design ovreview GB/T 19520.6-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-101:Subracks and associated plug-in units-Injector/extractor handle GB/T 19520.7-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-102:Subracks and associated plug-in units-Electromagnetic shielding provision GB/T 19520.8-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-103:Subracks and associated plug-in units-Electrostatic discharge protection GB/T 19520.9-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-104:Subracks and associated plug-in units-Keying

Copyright ©2007-2024 ANTPEDIA, All Rights Reserved