GB/T 19520.9-2004
Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-104:Subracks and associated plug-in units-Keying
2021-06
- Standard No.
- GB/T 19520.9-2004
- Language
- Chinese
- Release Date
- 2004
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Replace By
- GB/T 19520.14-2009
- GB/T 19520.19-2020
- Lastest
- GB/T 19520.19-2020
- Scope
- This part of GB/T 19520 is applicable to the expansion characteristics of the coded key insertion method added to the inserts and subracks with panels that comply with GB/T 19520.3, GB/T 19520.4 and GB/T 19520.11. A new type of subrack and plug-in (incompatible with the subrack and plug-in specified in GB/T 19520.3 and GB/T 19520.4) will be produced by supplementing this expansion feature with subracks and plug-ins. The purpose of this part is to standardize the relevant dimensions of subracks and their plug-ins with coding key expansion features added on the basis of GB/T 19520.3, GB/T 19520.4 and GB/T 19520.11, so as to ensure the interchangeability of their dimensions. See GB/T 18663.1 for mechanical and climatic tests.
GB/T 19520.9-2004 history
- 2020 GB/T 19520.19-2020 Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-107: Dimensions of subracks and plug-in units, small form factor
- 2009 GB/T 19520.14-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-103:Keying and alignment pin
- 2004 GB/T 19520.9-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-104:Subracks and associated plug-in units-Keying
GB/T 19520.9-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-104:Subracks and associated plug-in units-Keying was changed to GB/T 19520.14-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-103:Keying and alignment pin.
GB/T 19520.9-2004 -All Parts
GB/T 19520.1-2007 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482.6mm(19in)series Part 1: Panels and racks
GB/T 19520.10-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-105:Subracks and associated plug-in units-Alignment and/or earth pin
GB/T 19520.11-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-107:Subracks and associated plug-in units-Rear mounted plug-in units
GB/T 19520.12-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-101:Subracks and associated plug-in units
GB/T 19520.13-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-102:Injector/extractor handle
GB/T 19520.14-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-103:Keying and alignment pin
GB/T 19520.15-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-104:Connector dependent interface dimensions of subracks and plug-in units
GB/T 19520.16-2015 Mechanical structures for electronic equipment.Dimension of mechanical structures of the 482.6 mm (19 in) series.Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets
GB/T 19520.17-2010 Mechanical structures for electronic equipment.Dimension of mechanical structures of the 482.6 mm (19 in) series.Part 3-105:Dimensions and design aspects for 1U high chassis
GB/T 19520.18-2018 Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1
GB/T 19520.19-2020 Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-107: Dimensions of subracks and plug-in units, small form factor
GB/T 19520.2-2007 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482.6mm(19in)series Part 2: Cabinets and pitches of rack structures
GB/T 19520.3-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 3:Subracks and associated plug-in units
GB/T 19520.4-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 4:Subracks and associated plug-in units-Additional dimensions
GB/T 19520.5-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-100:Subracks and associated plug-in units-Design ovreview
GB/T 19520.6-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-101:Subracks and associated plug-in units-Injector/extractor handle
GB/T 19520.7-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-102:Subracks and associated plug-in units-Electromagnetic shielding provision
GB/T 19520.8-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-103:Subracks and associated plug-in units-Electrostatic discharge protection
GB/T 19520.9-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-104:Subracks and associated plug-in units-Keying