GB/T 19520.15-2009
Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-104:Connector dependent interface dimensions of subracks and plug-in units (English Version)
- Standard No.
- GB/T 19520.15-2009
- Language
- Chinese, Available in English version
- Release Date
- 2009
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
- GB/T 19520.15-2009
- Scope
- This part of GB/T 19520 includes connector-based interface dimensions for subracks and plug-ins that comply with GB/T 19520.12. This part involves two-piece connectors of GB/T 15157.2, IEC 61076-4-101 and IEC 61076-4-113 series. Since the specific standards for connectors only contain the dimensions of the connectors, the purpose of this standard is to propose the interface dimensions of subracks and inserts related to the above-mentioned connectors. This section will also provide dimensional guidelines for the application of other connectors by specifying the interrelationship between subrack mounting grid spacing and printed board type inserts and backplanes.
GB/T 19520.15-2009 Referenced Document
- GB/T 15157.2-1998 Connectors for frequencies below 3MHz for use with printed boards. Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54mm (0.1 in) with common mounting features
- GB/T 19290.1-2003 Modular order for the development of mechanical structures for electronic equipment practices-Part 1: Generic standard
- GB/T 19520.12-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-101:Subracks and associated plug-in units
- IEC 61076-4-101:2001 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality; Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
- IEC 61076-4-113:2002 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connector having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
GB/T 19520.15-2009 history
- 2009 GB/T 19520.15-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-104:Connector dependent interface dimensions of subracks and plug-in units
GB/T 19520.15-2009 -All Parts
GB/T 19520.1-2007 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482.6mm(19in)series Part 1: Panels and racks
GB/T 19520.10-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-105:Subracks and associated plug-in units-Alignment and/or earth pin
GB/T 19520.11-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-107:Subracks and associated plug-in units-Rear mounted plug-in units
GB/T 19520.12-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-101:Subracks and associated plug-in units
GB/T 19520.13-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-102:Injector/extractor handle
GB/T 19520.14-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-103:Keying and alignment pin
GB/T 19520.15-2009 Mechanical structures for eletronic equipment.Dimensions of mechanical structures of the 482.6 mm(19 in) series.Part 3-104:Connector dependent interface dimensions of subracks and plug-in units
GB/T 19520.16-2015 Mechanical structures for electronic equipment.Dimension of mechanical structures of the 482.6 mm (19 in) series.Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets
GB/T 19520.17-2010 Mechanical structures for electronic equipment.Dimension of mechanical structures of the 482.6 mm (19 in) series.Part 3-105:Dimensions and design aspects for 1U high chassis
GB/T 19520.18-2018 Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1
GB/T 19520.19-2020 Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-107: Dimensions of subracks and plug-in units, small form factor
GB/T 19520.2-2007 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482.6mm(19in)series Part 2: Cabinets and pitches of rack structures
GB/T 19520.20-2023 Mechanical construction of electrical and electronic equipment 482.6 mm (19 in) series mechanical construction dimensions Part 3-108: Dimensions of R-type sub-boxes and plug-ins
GB/T 19520.21-2023 Mechanical dimensions of electrical and electronic equipment 482.6 mm (19 in) series mechanical dimensions Part 3-109: Chassis dimensions of embedded computing devices
GB/T 19520.22-2023 Mechanical Structure of Electrical and Electronic Equipment 482.6 mm (19 in) Series Mechanical Structure Dimensions Part 3-110: Residential Racks and Cabinets for Smart Homes
GB/T 19520.3-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 3:Subracks and associated plug-in units
GB/T 19520.4-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 4:Subracks and associated plug-in units-Additional dimensions
GB/T 19520.5-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-100:Subracks and associated plug-in units-Design ovreview
GB/T 19520.6-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-101:Subracks and associated plug-in units-Injector/extractor handle
GB/T 19520.7-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-102:Subracks and associated plug-in units-Electromagnetic shielding provision
GB/T 19520.8-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-103:Subracks and associated plug-in units-Electrostatic discharge protection
GB/T 19520.9-2004 Mechanical structures for electronic equipment-Dimensions of mechanical structures of the 482,6mm(19 in)series-Part 5-104:Subracks and associated plug-in units-Keying