GB/T 2423.36-2005
Environmental testing for electric and electronic products Part.2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens (English Version)

GB/T 2423.36-2005
Standard No.
GB/T 2423.36-2005
Language
Chinese, Available in English version
Release Date
2005
Published By
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Status
 2020-01
Replace By
GB/T 2423.35-2019
Latest
GB/T 2423.35-2019
Replace
GB/T 2423.36-1986
Scope
This part of GB/T 2423 applies to the comprehensive test of high temperature vibration (sinusoidal) for heat dissipation and non-heat dissipation test samples, which is basically a combination of test Fc: vibration (sine) and test B: high temperature. This test method is limited to the case where the test sample is exposed to high temperature conditions to achieve temperature stabilization.

GB/T 2423.36-2005 Referenced Document

  • GB/T 2421-1999 Environmental testing for electric and electronic products Part 1: General and guidance
  • GB/T 2422-1995 Environmental testing for electric and electronic products. Terms and definitions
  • GB/T 2423.10 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal)*2019-06-04 Update
  • GB/T 2423.2-2001 Environmental testing for electric and electronic products Part 2: Test methods Tests B: Dry heat
  • GB/T 2423.22 Environmental testing.Part 2:Test methods.Test N:Change of temperature*2012-12-31 Update

GB/T 2423.36-2005 history

  • 2019 GB/T 2423.35-2019 Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests
  • 2005 GB/T 2423.36-2005 Environmental testing for electric and electronic products Part.2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
  • 1986 GB/T 2423.36-1986 Basic environmental testing procedures for electric and electronic products--Tests Z/BFc:Combined high temperature/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens

GB/T 2423.36-2005 Environmental testing for electric and electronic products Part.2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens was changed to GB/T 2423.35-2019 Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests.


GB/T 2423.36-2005 -All Parts

GB/T 2423.1-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold GB/T 2423.10-2019 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal) GB/T 2423.101-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test: Inclinations and swings GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal) GB/T 2423.11-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fd: Random vibration wide band--General requirements GB/T 2423.12-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fda: Random vibration wide band--Reproducibility high GB/T 2423.13-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdb: Random vibration wide band--Reproducibility medium GB/T 2423.14-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdc: Random vibration wide band--Reproducibility low GB/T 2423.15-2008 Environmental testing for electric and electronic products.Part 2:Tests methods.Test Ga and guidance:Acceleration,steady GB/T 2423.16-2022 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth GB/T 2423.17-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist GB/T 2423.18-2021 Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic(sodium chloride solution) GB/T 2423.19-2013 Environmental testing.Part 2:Test methods.Test Kc:Sulphur dioxide test for contacts and connections GB/T 2423.2-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat GB/T 2423.20-2014 Environmental testing.Part 2: Test methods.Test Kd: Hydrogen sulphide test for contacts and connections GB/T 2423.21-2008 Environmental testing for electric and electronic products.Part 2 Test methods Test M:Low air pressure GB/T 2423.22-2012 Environmental testing.Part 2:Test methods.Test N:Change of temperature GB/T 2423.23-2013 Environmental testing.Part 2:Test methods.Test Q:Sealing GB/T 2423.24-2022 Environmental testing—Part 2: Test methods—Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering GB/T 2423.25-2008 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests GB/T 2423.26-2008 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests GB/T 2423.27-2020 Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests GB/T 2423.28-2005 Environmental testing for electric and electronic products.Part2:Test methods-Test T:Soldering GB/T 2423.29-1999 Environmental testing for electric and electronic products-- Part 2:Test methods Test U:robustness of terminations and integral mounting devices GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state GB/T 2423.30-2013 Environmental testing.Part 2:Test methods.Test XA and guidance:Immersion in cleaning solvents



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved