GB/T 10541-2013 (English Version) Rubber hose, oil suction and discharge, offshore mooring

Standard No.: GB/T 10541-2013
Language: Chinese, Available in English version
Release Date: 2013
Published By: General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Status: Be replaced 2024-04
Replace By: GB/T 10541-2023
Latest: GB/T 10541-2023
Replace: GB/T 10541-2003

Scope: This standard specifies the classification and structure, general requirements, special requirements, sample hoses for identification, inspection rules, marking and packaging, storage and transportation of rubber hoses for oil drainage and suction at offshore moorings. This standard is applicable to crude oil or liquid petroleum products with an ambient temperature between -29 °C and 52 °C, transporting -20 °C to 82 °C and aromatic hydrocarbon content not exceeding 50% on the seabed or water surface, at -0.085 MPa to 1.5 MPa Rubber hoses that work under internal pressure. This standard applies to rubber hoses with an inner diameter of 400 mm or less and continuous oil delivery operations at a flow rate of no more than 21 m/s, and rubber hoses with an inner diameter of 400 mm or more and a flow rate of no more than 15 m/s. This standard does not apply to rubber hoses for transporting liquefied petroleum gas and natural gas.

GB/T 10541-2013 Referenced Document

GB/T 1298-2008 Carbon tool seels
GB/T 14905 Rubber and plastics hoses—Determination of adhesion between components*， 2020-11-19 Update
GB/T 1690-2010 Rubber,vulcanized or thermoplastic.Determination of the effect of liquids
GB/T 5567 Rubber and plastics hoses and hose assemblies.Determination of resistance to vacuum
GB/T 7762-2003 Rubber,vulcanized or thermoplastic--Resistance to ozone cracking--Static strain test
GB/T 8163 Seamless steel pipes for liquid service*， 2018-05-14 Update
GB/T 9572 Rubber and plastics hoses and hose assemblies.Determination of electrical resistance and conductivity
GB/T 9573 Rubber and plastics hoses and hose assemblies.Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
GB/T 9576 Rubber and plastics hoses and hose assemblies—Guidelines for selection, storage, use and maintenance*， 2019-08-30 Update
GB/T 9577 Rubber and plastics hose and hose assemblies--Rules for marking,package and transportation
GB/T 9867-2008 Rubber,vulcanized or thermoplastic.Determination of abrasion resistance using a rotating cylindrical drum device

2023 GB/T 10541-2023 Offshore mooring oil exhaust and suction rubber hose
2013 GB/T 10541-2013 Rubber hose, oil suction and discharge, offshore mooring
2003 GB/T 10541-2003 Rubber hose,oil suction and discharge,offshore mooring
1989 GB/T 10541-1989 Classification, dimension and basic requirement for rubber hose--Oil suction and discharge--Offshore mooring