GB/T 35022-2018
Additive manufacturing.Main characteristics and corresponding test methods.Parts and powder materials

Standard No.

GB/T 35022-2018

Language

Chinese

Release Date

2018

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Lastest

GB/T 35022-2018

Scope

This standard gives the main characteristics, test items, test methods and test reports of the parts prepared by the additive manufacturing process and the powder raw materials used in the additive manufacturing process. This standard applies to the testing of metal parts, plastic parts and ceramic parts prepared by additive manufacturing processes, as well as related powder raw materials.

GB/T 35022-2018 Referenced Document

• GB/T 1.1 Directives for standardization—Part 1: Rules for the structure and drafting of standardizing documents*， 2020-03-31 Update
• GB/T 1.2 Directives for standardization—Part 2:Drafting rules of standardizing documents based on ISO/IEC standardizing documents*， 2020-11-19 Update
• GB/T 1.22 Directives for work of standardization Unit2:Methodology for the development of standards Part22:Rule of "reference to standards"
• GB/T 1.4 Standardization Work Guidelines Chemical Analysis Method Standard Compilation Provisions
• GB/T 1.6 Regulations on Compilation of Terminology Standards in Standardization Work Guidelines
• GB/T 1031 Geometrical Product Specifications(GPS).Surface texture:Profile method.Surface roughness parameters and their values
• GB/T 1033.1 Plastics.Methods for determining density of non-celluar plastics.Part1:Immersion method,liquid pyknometer method and titration method
• GB/T 1040.1 Plastics—Determination of tensile properties—Part 1:General principles*， 2018-12-28 Update
• GB/T 1040.2 Plastics—Determination of tensile properties—Part 2: Test conditions for moulding and extrusion plastics*， 2022-07-11 Update
• GB/T 1040.3 Plastics. Determination of tensile properties. Part 3: Test conditions for films and sheets
• GB/T 1040.4 Plastics. Determination of tensile properties. Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
• GB/T 1041 Plastics.Determination of compressive properties
• GB/T 1043.1 Plastics.Determination of charpy impact properties.Part 1:Non-instrumented impact test
• GB/T 10700 Test methods for elastic moduli of fine ceramics (advanced ceramics,advanced technical ceramics).Bending method
• GB/T 11546.1 Plastic.Determination of creep behaviour.Part 1:Tensile creep
• GB/T 1182 Geometrical product specifications(GPS)—Geometrical tolerancing—Tolerances of form, orientation, location and run-out*， 2018-09-17 Update
• GB/T 11986 Surface active agents--Powders and granules--Mesurement of the angle of repose
• GB/T 13298 Inspection methods of microstructure for metals
• GB/T 1479.1 Metallic powders—Determination of apparent density—Part 1:Funnal method
• GB/T 1479.2 Metallic powders—Determination of apparent density—Part 2:Scott volumeter method
• GB/T 1480 Metallic powders.Determination of particle size by dry sieving
• GB/T 1634.1 Plastics—Determination of temperature of deflection under load—Part 1:General test method*， 2019-05-10 Update
• GB/T 1636 Plastics.Determination of apparent density material that can be poured from a specified funnel
• GB/T 1800.1 Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 1: Basis of tolerances, deviations and fits*， 2020-04-28 Update
• GB/T 1804 General tolerances Tolerances for linear and angular dimensions without individual tolerance indications
• GB/T 1843 Determination of Izod Impact Strength of Plastics
• GB/T 2039 Metallic materials.Uniaxial creep testing method in tension
• GB/T 228 Metallic materials--Tensile testing at ambient temperature
• GB/T 229 Metallic materials—Charpy pendulum impact test method*， 2020-09-29 Update
• GB/T 230.1 Metallic materials.Rockwell hardness test.Part 1:Test method
• GB/T 231.1 Metallic materials—Brinell hardness test—Part 1: Test method
• GB/T 2411 Plastics and ebonite.Determination of indentation hardness by means of a durometer(shore hardness)
• GB/T 2913 Test for whiteness of plastics
• GB/T 2916 Plastic.Vinyl chloride homopolymer and copolymer resins.Sieve analysis using air-jet sieve apparatus
• GB/T 3075 Metallic materials—Fatigue testing—Axial force-controlled method*， 2021-08-20 Update
• GB/T 3398.1 Plastics.Determination of hardness.Part 1:Ball indentation method
• GB/T 3398.2 Plastics.Determination of hardness.Part 2:Rockwell hardness
• GB/T 3682 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
• GB/T 3850 Impermeable sintered metal materials and hardmetals.Determination of density
• GB/T 3851 Hardmetals.Determination of transverse rupture strength
• GB/T 3979 Methods for the measurement of object color
• GB/T 4337 Metallic materials.Fatigue testing.Rotating bar bending method
• GB/T 4340.1 Metallic materials.Vickers hardness test.Part 1:Test method
• GB/T 4739 Test method for measuring the colorimetry of ceramic pigment
• GB/T 5163 Sintered metal materials,excluding hardmetals.Permeable sintered metal materials.Determination of density,oil content,and open porosity
• GB/T 6569 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
• GB/T 7314 Metallic materials—Compression test method at room temperature
• GB/T 7704 Non-destructive testing—Practice for residual stress measurement by X-ray
• GB/T 8489 Test method for compressive strength of fine ceramics (advanced ceramics,advanced technical ceramics)
• GB/T 9341 Plastic.Determination of flexural properties
• GB/T 9345.1 Plastics.Determination of ash.Part1:General methods

GB/T 35022-2018 history

• 2018 GB/T 35022-2018 Additive manufacturing.Main characteristics and corresponding test methods.Parts and powder materials