ZH
RU
ES

double standard curve method

double standard curve method, Total:500 items.

In the international standard classification, double standard curve method involves: Construction industry, Non-ferrous metals, Testing of metals, Noise with respect to human beings, Machine tools, Sports equipment and facilities, Waxes, bituminous materials and other petroleum products, Road engineering, Rubber and plastics products, Products of the textile industry, Raw materials for rubber and plastics, Semiconducting materials, Electrical wires and cables, Components and accessories for telecommunications equipment, Chipless working equipment, Earth-moving machinery, Iron and steel products, Electrical accessories, Medical equipment, Technical drawings, Gears, Characteristics and design of machines, apparatus, equipment, Petroleum products in general, Springs, Construction materials, Paper products, Packaging materials and accessories, Pipeline components and pipelines, Optics and optical measurements, Vocabularies, Electricity. Magnetism. Electrical and magnetic measurements, Road vehicles in general, Refractories, Reinforced plastics, Lubricants, industrial oils and related products, Plastics, Organic chemicals, Photography, Adhesives, Insulating materials, Hydraulic fluids, Non-textile floor coverings, Wood-based panels, Telecommunication systems, Soil quality. Pedology, Powder metallurgy, Measurement of volume, mass, density, viscosity, Paints and varnishes, Elements of buildings, Textile fibres, Aids for disabled or handicapped persons, Kitchen equipment, Milk and milk products, Aerospace electric equipment and systems, Surface treatment and coating, Cellular materials, Welding, brazing and soldering, Analytical chemistry, Particle size analysis. Sieving, Products of the chemical industry, Leather technology, Fasteners, Ceramics, Magnetic materials, Solar energy engineering, Paint ingredients, Linear and angular measurements, Glass, Corrosion of metals, Coatings and related processes used in aerospace industry, Acoustics and acoustic measurements, Building accessories, Services, Rubber.

Group Standards of the People's Republic of China, double standard curve method

T/CECS 1068-2022 Reliability Appraisal Standards for Hyperbolic Cooling Towers
T/IAWBS 017-2022 Test method for full width at half maximum of double crystal X-rayrocking curve of diamond single crystal substrate
T/IAWBS 015-2021 Test method for full width at half maximum of double crystal X-ray rocking curve of Ga2O3 single crystal substrate
T/IAWBS 016-2022 X-ray double crystal rocking curve FWHM test method for silicon carbide single wafer
T/SHZSAQS 00084-2022 Formaldehyde standard curve preparation technical regulations

AASHTO - American Association of State Highway and Transportation Officials, double standard curve method

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
T 272-1986 Standard Method of Test for Family of Curves - One-Point Method (HM-22; PART IIB)
PP 62-2009 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA)
T272-1986 Standard Method of Test for Family of Curves - One-Point Method (Nineteenth Edition; Revised Per Interim Specifications - Tests and Methods - 1999)
T285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
T 285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
R 62-2013 Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
TP 107-2018 Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test
PP 96-2018 Proposed Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures Using the Indirect Tension Testing Method
T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2004 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP 125-2016 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2003 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2008 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1998 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1997 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2005 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2012 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 321-2007 Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (HMA) Subjected to Repeated Flexural Bending
T 321-2003 Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (MHA) Subjected to Repeated Flexural Bending
TP 107-2014 Standard Method of Test for Determining the Damage Characteristic Curve of Asphalt Mixtures from Direct Tension Cyclic Fatigue Tests

American Society for Testing and Materials (ASTM), double standard curve method

ASTM B478-85(2016) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E561-21 Standard Test Method for KR Curve Determination
ASTM E561-20 Standard Test Method for KR Curve Determination
ASTM E561-19 Standard Test Method for KR Curve Determination
ASTM E561-19e1 Standard Test Method for KR Curve Determination
ASTM E561-22 Standard Test Method for KR Curve Determination
ASTM E561-08e1 Standard Test Method forK-R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM E561-05e1 Standard Test Method forK-R Curve Determination
ASTM E561-15a Standard Test Method for KR Curve Determination
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method forK-R Curve Determination
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D5418-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM D1336-97(2003) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D1336-97 Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM E561-98 Standard Practice for R-Curve Determination
ASTM E561-15 Standard Test Method for KR Curve Determination
ASTM E561-08 Standard Test Method forK-R Curve Determination
ASTM D3883-04 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM B911/B911M-00 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
ASTM B911/B911M-22 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
ASTM B911/B911M-12(2016) Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
ASTM E561-23 Standard Test Method for KR Curve Determination
ASTM D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM F534-02 Standard Test Method for Bow of Silicon Wafers
ASTM F1832-07 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D6068-96 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM E2948-14 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM F3141-23 Standard Guide for Total Knee Replacement Loading Profiles
ASTM B911/B911M-05 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
ASTM D3883-99 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM D3883-04(2008) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D3883-04(2012) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM B911/B911M-12 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
ASTM D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM B389-81(1998) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM B389-81(2020) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM C1699-09(2015) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM C485-83(2003) Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM C485-83(1999) Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM F534-97 Standard Test Method for Bow of Silicon Wafers
ASTM C485-83(2003)e1 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM F415-87(2005) Standard Test Method for Curl in Carbon Paper
ASTM D3813/D3813M-98(2003) Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM D3813/D3813M-98 Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM F415-87(2000)e1 Standard Test Method for Curl in Carbon Paper
ASTM F415-87(2010) Standard Test Method for Curl in Carbon Paper
ASTM C485-16 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM D6200-01(2007) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-00 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM E1082-90(2002) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1082-90(2007) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C16-03(2008) Standard Test Method for Load Testing Refractory Shapes at High Temperatures
ASTM E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C1699-09(2023) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM C1699-08 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D6200-01(2012) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D2136-02(2012) Standard Test Method for Coated Fabricsmdash;Low-Temperature Bend Test
ASTM D1830-17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D6121-08 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-08a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-08b Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-19 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-19ae1 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-17 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-16a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-14 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM B389-81(2004) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM B389-81(2008) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM D4493-16 Standard Test Method for Solidification Point of Bisphenol A(4,4&x2032;-Isopropylidenediphenol)
ASTM E746-02 Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E746-93(1998) Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM D4338-97(2004) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4338-97(2011)e1 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4338-97 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4882-97 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM F2771-10 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM D4882-17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM D6549-01 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-00 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM F1304-08 Standard Test Method for Deflection of Resilient Floor Tile
ASTM D3043-00e1 Standard Test Methods for Testing Structural Panels in Flexure
ASTM F1304-03 Standard Test Method for Deflection of Resilient Floor Tile
ASTM D3043-00(2006) Standard Test Methods for Structural Panels in Flexure
ASTM F1304-90(1994)e1 Standard Test Method for Deflection of Resilient Floor Tile
ASTM F1304-01 Standard Test Method for Deflection of Resilient Floor Tile
ASTM D3043-00 Standard Test Methods for Testing Structural Panels in Flexure
ASTM F1304-18 Standard Test Method for Deflection of Resilient Floor Tile
ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
ASTM F556-88(2011) Standard Test Method for Curl of Carbonless Copy Papers
ASTM C485-09 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM D6121-03a Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-03 Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-05a Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-19a Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D7014-18 Standard Practice for Installation of Double-Twisted Wire Mesh Gabions and Revet Mattresses
ASTM B362-91(2008) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
ASTM D1830-99(2012) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D6549-06(2015) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6121-02 Standard Test Method for Evaluation of the Load Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM F2771-09 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM D6121-15a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-16 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D648-04 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-00a Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-01 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-07 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM C880-98 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880-06 Standard Test Method for Flexural Strength of Dimension Stone
ASTM D2136-02 Standard Test Method for Coated Fabrics8212;Low-Temperature Bend Test
ASTM D2136-02e1 Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM C480-99(2005) Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM C480-99 Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM C1352-96(2002) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM D2136-02(2007) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM G10-10 Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM F556-88(2001) Standard Test Method for Curl of Carbonless Copy Papers
ASTM F556-88(1996)e1 Standard Test Method for Curl of Carbonless Copy Papers
ASTM C480/C480M-08 Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM G10-83(1996)e1 Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C393-00 Standard Test Method for Flexural Properties of Sandwich Constructions
ASTM F556-88(2006) Standard Test Method for Curl of Carbonless Copy Papers
ASTM E518/E518M-15 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM F1304-08(2013) Standard Test Method for Deflection of Resilient Floor Tile
ASTM C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone
ASTM G10-10(2019) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM D7774-22 Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM D3937-12 Standard Test Method for Crimp Frequency of Manufactured Staple Fibers
ASTM C880/C880M-15 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C1352/C1352M-15 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM D7774-17 Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM D6121-06 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-06a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6549-06(2011) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D7646-10(2014) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D3885-04 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D6549-06(2021) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM C120-06e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120-06 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120/C120M-09 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM F2531-05 Standard Test Method for Load Capacity of Treestand Seats
ASTM F1605-95(2007) Standard Test Method for Performance of Double-Sided Griddles
ASTM F1605-95(2001) Standard Test Method for Performance of Double-Sided Griddles
ASTM F1605-95(2001)e1 Standard Test Method for Performance of Double-Sided Griddles
ASTM F1605-95 Standard Test Method for Performance of Double-Sided Griddles
ASTM F1605-14 Standard Test Method for Performance of Double-Sided Griddles
ASTM F1605-14(2019) Standard Test Method for Performance of Double-Sided Griddles
ASTM D4493-20 Standard Test Method for Solidification Point of Bisphenol A(4,4′-Isopropylidenediphenol)
ASTM D4493-12 Standard Test Method for Solidification Point of Bisphenol A (4,4`-Isopropylidenediphenol)
ASTM D6905-03 Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D6905-03(2008) Standard Test Method for Impact Flexibility of Organic Coatings
ASTM C480/C480M-08(2015) Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM F1874-98(2011) Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
ASTM D6905-03(2012) Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D3768-22 Standard Test Method for Microcellular Urethanes—Flexural Recovery
ASTM E190-92(2008) Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM C480/C480M-16 Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM D6121-12a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D4032-94 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D4032-94(2001) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D4032-08 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D3885-07a Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07a(2011) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D4032-08(2012) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D3885-07a(2019) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07A(2019)e1 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07a(2015) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D4032-08(2016) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM E1541-98 Standard Practice for Specifying and Matching Color Using the Colorcurve System
ASTM C1656-07 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
ASTM D8165-21e1 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D6121-13 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-15 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6482-99 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6143-97 Standard Test Method for Iron Content of Bisphenol A (4,4180 - Isopropylidenediphenol)
ASTM E1181-02(2008) Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM E1181-02(2008)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM D6143-09 Standard Test Method for Iron Content of Bisphenol A (4,4180; - Isopropylidenediphenol)
ASTM D6121-09 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D4882-05(2012) Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM C1025-91(2005) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM D2097-03(2005) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM E518-03 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E290-97a(2004) Standard Test Methods for Bend Testing of Material for Ductility
ASTM D2097-03 Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM D2097-03(2010) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM F1575/F1575M-21 Standard Test Method for Determining Bending Yield Moment of Nails
ASTM G10-10(2015) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM C674-13(2018) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
ASTM C674-13(2023) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
ASTM D4825-97(2002) Standard Test Method for Measurement of Curl in Cut-Sized Office Paper
ASTM C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM F1575-17 Standard Test Method for Determining Bending Yield Moment of Nails
ASTM D2097-03(2023) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM D1184-98(2020) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM D2097-03(2016) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM A977/A977M-07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D6549-06 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM A977/A977M-07(2013) Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM B913-00e1 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM B913-00 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM D8165-19 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D8165-19a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D8165-20a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D8165-21 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D8165-20 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D8165-22 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D8165-17 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM C1656-13 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
ASTM D6482-06 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-10 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D6482-21 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-23 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D801-02(2009) Standard Test Methods for Sampling and Testing Dipentene
ASTM E1181-87(1998)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM E1181-02 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM D2589/D2589M-88(2019) Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber
ASTM E1181-02(2023) Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM D801-02(2022) Standard Test Methods for Sampling and Testing Dipentene
ASTM D801-02(2013) Standard Test Methods for Sampling and Testing Dipentene
ASTM A977-97 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM G75-07 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM F3359-18 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM F392-93(2004) Standard Test Method for Flex Durability of Flexible Barrier Materials
ASTM E518-00a Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D3937-07 Standard Test Method for Crimp Frequency of manufactured Staple Fibers
ASTM E518-02 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D7264/D7264M-07 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D2136-94(1998) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM F1874-98(2004) Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
ASTM F1874-98 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
ASTM C1025-91(2010)e1 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM F392/F392M-11 Standard Test Method for Flex Durability of Flexible Barrier Materials
ASTM F384-06(2011) Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
ASTM F3359-19 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM F3359/F3359M-21 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM D3813/D3813M-98(2020) Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
ASTM E190-14 Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM C120/C120M-15a Standard Test Methods for Flexure Testing of Structural and Roofing Slate
ASTM C120/C120M-19 Standard Test Methods for Flexure Testing of Structural and Roofing Slate
ASTM E190-21 Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM C158-02(2012) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM G30-97(2009) Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
ASTM D2136-19 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM D2136-19e1 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM C1025-15 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM D3885-02 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM E1124-10 Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
ASTM D6482-01 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06(2011) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-10(2019) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D6482-06(2016) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM A773/A773M-01 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM A773/A773M-96 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM A773/A773M-21 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
ASTM A773/A773M-14 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
ASTM F1577-05 Standard Test Methods for Detention Locks for Swinging Doors
ASTM F1577-05(2012) Standard Test Methods for Detention Locks for Swinging Doors
ASTM D6515-00(2010) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM E290-97a Standard Test Method for Bend Testing of Material for Ductility
ASTM C158-02(2007) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C1072-06 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM D648-06 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM C5-79(1997) Standard Specification for Quicklime for Structural Purposes
ASTM C5-03(2009) Standard Specification for Quicklime for Structural Purposes
ASTM D7264/D7264M-06 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM E290-09 Standard Test Methods for Bend Testing of Material for Ductility
ASTM C598-93(1998) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM D7264/D7264M-21 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D522/D522M-17(2021) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM E290-13 Standard Test Methods for Bend Testing of Material for Ductility
ASTM D7264/D7264M-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D648-16 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM C598-93(2019) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C158-02(2017) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D3768-11 Standard Test Method for Microcellular Urethanesmdash;Flexural Recovery
ASTM D6515-00(2016) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D522/D522M-17 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D7196-23 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
ASTM D3111-99 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D3111-10(2018) Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D747-10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D6121-11 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-12 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D6121-12b Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D1907-01 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM D1907-97 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM D1907/D1907M-12(2018) Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM E1124-97(2004) Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
ASTM E1124-10(2016) Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
ASTM E305-07 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM C1656-13(2018) Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
ASTM E305-13 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM C1656-13(2023) Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
ASTM E2310-04(2015) Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy
ASTM D2433-07 Standard Test Methods for Rubber Thread
ASTM D204-02 Standard Test Methods for Sewing Threads
ASTM D204-97 Standard Test Methods for Sewing Threads
ASTM D204-02(2010)e1 Standard Test Methods for Sewing Threads
ASTM D2433-93(2002) Standard Test Methods for Rubber Thread
ASTM D204-02(2021) Standard Test Methods for Sewing Threads
ASTM D204-02(2016) Standard Test Methods for Sewing Threads
ASTM D6121-10 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D7249/D7249M-12 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
ASTM D7249/D7249M-12e1 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
ASTM D3111-10 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D2589-88(2002) Standard Test Method for McNett Wet Classification of Duel Asbestos Fiber

The American Road & Transportation Builders Association, double standard curve method

AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)
AASHTO R 62-2013 Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
AASHTO T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO TP 107-2014 Standard Method of Test for Determining the Damage Characteristic Curve of Asphalt Mixtures from Direct Tension Cyclic Fatigue Tests
AASHTO T 286-1996 Standard Method of Test for Measurement of Vehicular Response to Traveled Surface Roughness HM-22; Part IIA; ASTM Designation E 1082-90(1995) R(2000)

GM North America, double standard curve method

GM 9985154-1996 Lubricant - Hypoid Gear, Standard Differential
GM 9985044-1996 Lubricant, Hypoid Gear, Standard Differential, 80W

Association Francaise de Normalisation, double standard curve method

NF S30-003*NF ISO 226:2004 Acoustics - Normal equal-loudness-level contours

International Organization for Standardization (ISO), double standard curve method

ISO 226:1987 Acoustics; Normal equal-loudness level contours
ISO 226:2023 Acoustics — Normal equal-loudness-level contours
ISO 226:2003 Acoustics - Normal equal-loudness-level contours
ISO/TR 13989-2:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Part 2: Integral temperature method
ISO/TR 13989-1:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Part 1: Flash temperature method

British Standards Institution (BSI), double standard curve method

BS ISO 226:2003 Acoustics - Normal equal-loudness-level contours
BS EN 3373-014:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 °C - Product standard
BS EN 3373-008:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C. Product standard
BS EN IEC 61853-4:2018 Photovoltaic (PV) module performance testing and energy rating - Standard reference climatic profiles
BS EN 3373-007:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs. Product standard
BS ISO/TR 13989-2:2001 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Integral temperature method
BS ISO/TR 13989-1:2001 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Flash temperature method

RU-GOST R, double standard curve method

GOST 9735-1987 Profile grinders. Standards of accuracy
GOST 7766-1988 Single-acting closed two-crank presses. Parameters and dimensions. Norms of accuaracy

Korean Agency for Technology and Standards (KATS), double standard curve method

KS I ISO 226:2003 Acoustics-Normal equal-loudness level contours
KS I ISO 226:2014 Acoustics — Normal equal-loudness level contours
KS F 2395-2014 Standard test method for bend testing of asphalt mixtures
KS F 2390-2014 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS F 2566-2014(2019) Standard test method for flexural performance of fiber reinforced concrete
KS F 2390-2019 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS F 2491-2017 Standard test method of the flexural beam test for porous asphalt binder
KS F 2395-2014(2019) Standard test method for bend testing of asphalt mixtures
KS F 2491-2017(2022) Standard test method of the flexural beam test for porous asphalt binder

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, double standard curve method

GB/T 4963-2007 Acoustics.Normal equal-loudness-level contours
GB/T 32188-2015 Test method for full width at half maximum of double crystal X-ray rocking curve of GaN single crystal substrate
GB/T 36063-2018 Nanotechnologies—Raman shift standard curve for spectrometer calibration
GB/Z 6413.1-2003 Calculation of scuffing load capacity of cylindrical,bevel and hypoid gears--Part 1:Flash temperature method
GB/Z 6413.2-2003 Calculation of scuffing load capacity of cylindrical,bevel and hypoid gears--Part 2:Integral temperature method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, double standard curve method

GB/T 34612-2017 Measurement method for X-ray double crystal diffraction rocking curve of sapphire crystals

SE-SIS, double standard curve method

SIS SMS 2027-1975 Dust separating. Standard curves for dust
Nr 39-1992

German Institute for Standardization, double standard curve method

DIN ISO 226:2006 Acoustics - Normal equal-loudness-level contours (ISO 226:2003);English version of DIN ISO 226:2006-04
DIN 48051-1:1959-09 Power current overhead lines; bent insulator spindles, standard design
DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system
DIN 55912-2 Bb.2:1999 Pigments - Titanium dioxide pigments - Methods of analysis; establishing a calibration graph using the X-ray fluorescence analysis

Society of Automotive Engineers (SAE), double standard curve method

SAE J739-1991 Cutting Edge - Curved Grader, Standard June 1991
SAE J2435-1999 Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Double Flaring, and Beading
SAE J356-1999 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading
SAE J356-1986 WELDED FLASH CONTROLLED LOW CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING

YU-JUS, double standard curve method

JUS N.C2.331-1982 Telecommunications. Moisture resistant ccnnection cotd with strana^ paired conductors TG 31
JUS N.C2.341-1983 Telecommunications. Connection cords with stranded paired conductors, TG 41 and TG 41S
JUS U.M1.042-1987 Determination of ultrasonic pulse velocity and calibration curve
JUS U.J1.070-1986 Fire protection. Standard time-temperature curve in fire resistance test furnaces for constructions

TIA - Telecommunications Industry Association, double standard curve method

TIA-568.2-C-2009 Balanced Twisted-Pair Telecommunications Cabling and Components Standards
TIA-568.2-C ERTA-2010 Balanced Twisted-Pair Telecommunications Cabling and Components Standards
TIA/EIA-568-B.2-2001 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components
TIA-568.2-C-2-2014 Balanced Twisted-Pair Telecommunications Cabling and Components Standard@ Addendum 2: Alternative Test Methodology for Category 6A Patch Cords (Addendum to TIA-568-C)
TIA-568.2-C-1-2016 Balanced Twisted-Pair Telecommunications Cabling and Components Standard@ Addendum 1: Specifications for 100 Ω Category 8 Cabling

American National Standards Institute （ANSI), double standard curve method

ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays
ANSI Y14.7.2-1978 Gear and spline drawing standards - Part 2: Bevel and hypoid gears
ANSI/UL 497-2004 Standard for Safety for Protectors for Paired-Conductor Communications Circuits
ANSI/TIA-568-C.2-2009 Balanced Twisted-Pair Telecommunications Cabling and Components Standard
ANSI/ASTM F1605:2014 Standard Test Method for Performance of Double-Sided Griddles
ANSI/ICEA S-99-689-2012 ICEA Standard for Broadband TP Filled, PE, Cu
ANSI/ICEA S-98-688-2012 ICEA Standand for Broadband TP Aircore, PE, CU

IT-UNI, double standard curve method

UNI S 195-1943

American Society of Mechanical Engineers (ASME), double standard curve method

ASME Y14.7.2-1978 Gear and spline drawing standards - Part 2: Bevel and hypoid gears
ASME Y14.7.2-1978(R2004) Gear and Spline Drawing Standards-Part 2: Bevel and Hypoid Gears
ASME STP-PT-094-2022 Determination of Stress Strain Curves of 304, 304L, 316, 316L for Strain-Based Design Criteria

American Gear Manufacturers Association, double standard curve method

AGMA 11FTM10-2011 New Methods for the Calculation of the Load Capacity of Bevel and Hypoid Gears
AGMA 12FTM15-2012 New Methods for the Calculation of the Load Capacity of Bevel and Hypoid Gears
AGMA 96FTM2-1996 New Way of Manufacturing Bevel and Hypoid Gears in a Continuous Process
AGMA 96FTM1-1996 Computer Based Approach Aimed at Reproducing Master Spiral Bevel and Hypoid Pinions and Gears

AGMA - American Gear Manufacturers Association, double standard curve method

12FTM15-2012 New Methods for the Calculation of the Load Capacity of Bevel and Hypoid Gears
11FTM10-2011 New Methods for the Calculation of the Load Capacity of Bevel and Hypoid Gears
96FTM2-1996 New Way of Manufacturing Bevel and Hypoid Gears in a Continuous Process
96FTM1-1996 Computer Based Approach Aimed at Reproducing Master Spiral Bevel and Hypoid Pinions and Gears

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, double standard curve method

GJB/J 5973-2007 Calibration specifIcation for secondary standard two-temperature two-pressure humidity generator

Military Standard of the People's Republic of China-General Armament Department, double standard curve method

GJB 8621-2015 Calibration specification for standard humidity generator using two-stage dual-temperature and dual-pressure method

PK-PSQCA, double standard curve method

PS 122-1985 PAKISTAN STANDARD METHOD FOR THE DETERMINATION OF CRIMP OF YARN IN FABRIC

国家市场监督管理总局、中国国家标准化管理委员会, double standard curve method

GB/T 38719-2020 Metallic materials—Tube—Determination of biaxial stress-strain curve of tube by hydro-bulging test
GB/T 38684-2020 Metallic materials—Sheet and strip—Biaxial stress-strain curve by means of bulge test—Optical measuring systems

Institute of Electrical and Electronics Engineers (IEEE), double standard curve method

IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions

(U.S.) Ford Automotive Standards, double standard curve method

FORD WSS-M2C940-A-2005 LUBRICANT, LIMITED SLIP REAR AXLE HYPOID, SAE 85W-140 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSL-M2C192-A-2010 LUBRICANT, SAE 75W-140, HYPOID GEAR, SYNTHETIC ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESW-M2C105-A-2004 LUBRICANT, HYPOID GEAR - SAE 90 SULFUR PHOSPHORUS - 10% ADDITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSP-M2C196-A-2009 OIL, FRICTION MODIFIER, HYPOID GEAR, LUBRICANT ADDITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSP-M2C197-A-2010 LUBRICANT, REAR AXLE HYPOID, THERMALLY STABLE, SAE 80W-90 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD EST-M2C118-A-2004 OIL FRICTION MODIFIER, HYPOID GEAR, LUBRICANT ADDITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***

Underwriters Laboratories (UL), double standard curve method

UL 497 BULLETIN-2007 UL Standard for Safety Protectors for Paired Conductor Communications Circuits

NEMA - National Electrical Manufacturers Association, double standard curve method

NEMA WC 76-2018 Standard for Controlled Impedance Shielded Twisted Pairs in Internal Electrical Cable
NEMA WC 63.1-1996 Performance Standard for Twisted Pair Premise Voice and Data Communications Cables
NEMA WC 63.1-2005 Performance Standard for Twisted Pair Premise Voice and Data Communications Cable

(U.S.) Telecommunications Industries Association , double standard curve method

TIA/EIA-568-B.2 ERTA-2002 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components
TIA-568-C.2-2009 Balanced Twisted-Pair Telecommunications Cabling and Components Standards
TIA-568-C.2 ERTA-2010 Balanced Twisted-Pair Telecommunications Cabling and Components Standards
TIA-568-C.2-2-2014 Balanced Twisted-Pair Telecommunications Cabling and Components Standard, Addendum 2: Alternative Test Methodology for Category 6A Patch Cords (Addendum to TIA-568-C)
TIA-568-C.2-1-2016 Balanced Twisted-Pair Telecommunications Cabling and Components Standard, Addendum 1: Specifications for 100 Ω Category 8 Cabling
TIA-568-B.2-11-2005 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components Addendum 11 ?Specification of 4-Pair UTP and SCTP Cabling Addendum 11: DECEMBER 2005
TIA-568-B.2-9-2007 Commercial Building Telecommunications Cabling Standard Part 2 - Balanced Twisted-Pair Cabling Components Addendum 9 ?Additional Category 6 Balance Requirements and Measurement Procedures
TIA-568-B.2-6-2003 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 6 ?Category 6 Related Component Test Procedures Addendum 6 to TIA-568-B.2
TIA-568-B.2-5-2003 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted Pair Cabling Components Addendum 5 - Corrections to TIA/EIA-568-B.2 Addendum 5 to TIA-568-B.2

ICEA - Insulated Cable Engineers Association Inc., double standard curve method

S-92-675-2005-2005 Standard for Coaxial and Coaxial/Twisted Pair Composite Aerial Service Wires Technical Requirements

Professional Standard - Agriculture, double standard curve method

农业农村部公告第273号 Standard for the detection method of toltrazuril sulfone residues (trial implementation)
NY/T 1664-2008 Rapid determination for aflatoxin M in milk.Double flow enzyme-linked immunosorbent assay

RO-ASRO, double standard curve method

STAS 6901-1978 Psycho-physiological acou stics STANDARD CURVES OF EQUAL LOUDNESS LEVEL AND RELATIONS BETWEEN SOUND PRESSURE LEVELS

National Association of Corrosion Engineers (NACE), double standard curve method

NACE RP0197-1997 Standard Format for Computerized Electrochemical Polarization Curve Data Files
NACE RP0197-2004 Standard Format for Computerized Electrochemical Polarization Curve Data Files Item No. 21080

Professional Standard - Aviation, double standard curve method

HB 5434.6-1989 Method for determination of standard flexural strength of aircraft wheel brakes

Professional Standard - Railway, double standard curve method

TB/T 1506-2003 Standards of operation of receiving and departing trains on single and double lines with telephone block and without interlocking

Canadian Standards Association (CSA), double standard curve method

CSA T568.2-2005 Commercial building telecommunications cabling standard — Part 2: Balanced twisted-pair cabling components (First Edition)
CSA T568.2-2-2005 Commercial building telecommunications cabling standard — Part 2: Balanced twisted pair cabling components — Addendum 2 (First Edition)

CZ-CSN, double standard curve method

CSN 09 3351 Zc-1989

National Electrical Manufacturers Association（NEMA), double standard curve method

NEMA WC 63.1-2000 Performance Standard for Twisted Pair Premise Voice and Data Communications Cable

National Metrological Technical Specifications of the People's Republic of China, double standard curve method

JJF 1426-2013 Calibration Specification for Dynamic Parameters of Linear Accelerometer Used Double Centrifuge

VE-FONDONORMA, double standard curve method

COVENIN 636-1974

BR-ABNT, double standard curve method

ABNT PB-528-1979

Indonesia Standards, double standard curve method

SNI ASTM C674:2010 Standart Test Methods for Flexural Properties of Ceramic Whiteware Materials1

European Committee for Standardization (CEN), double standard curve method

EN 3373-007:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs - Product standard
EN ISO 16808:2022 Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO 16808:2022)

商务部, double standard curve method

SB/T 10934.3-2016 Standard bilingual translation of commonly used Chinese dish names Part 3: Chinese translation