ZH
RU
ES

standard curve method standard method

standard curve method standard method, Total:500 items.

In the international standard classification, standard curve method standard method involves: Testing of metals, Waxes, bituminous materials and other petroleum products, Non-ferrous metals, Noise with respect to human beings, Machine tools, Semiconducting materials, Sports equipment and facilities, Products of the textile industry, Raw materials for rubber and plastics, Road engineering, Construction materials, Paper products, Iron and steel products, Petroleum products in general, Non-textile floor coverings, Wood-based panels, Packaging materials and accessories, Earth-moving machinery, Construction industry, Springs, Electrical accessories, Reinforced plastics, Paints and varnishes, Elements of buildings, Plastics, Textile fibres, Power transmission and distribution networks, Optics and optical measurements, Rubber and plastics products, Adhesives, Medical equipment, Rubber, Surface treatment and coating, Cellular materials, Welding, brazing and soldering, Measurement of volume, mass, density, viscosity, Wood, sawlogs and sawn timber, Hydraulic fluids, Road vehicles in general, Refractories, Products of the chemical industry, Leather technology, Fasteners, Ceramics, Insulating materials, Glass, Corrosion of metals, Analytical chemistry, Tyres, Electrical wires and cables, Photography, Vocabularies, Electricity. Magnetism. Electrical and magnetic measurements, Electromagnetic compatibility (EMC), Products of non-ferrous metals, Mechanical testing, Paper and board, Internal combustion engines, Protection against fire, Water quality, Aerospace electric equipment and systems, Magnetic materials, Fruits. Vegetables, Cereals, pulses and derived products, Milk and milk products, Sugar. Sugar products. Starch, Standardization. General rules.

AASHTO - American Association of State Highway and Transportation Officials, standard curve method standard method

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
T 272-1986 Standard Method of Test for Family of Curves - One-Point Method (HM-22; PART IIB)
T285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
T 285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
T272-1986 Standard Method of Test for Family of Curves - One-Point Method (Nineteenth Edition; Revised Per Interim Specifications - Tests and Methods - 1999)
TP 107-2018 Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test
PP 62-2009 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA)

The American Road & Transportation Builders Association, standard curve method standard method

AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)
AASHTO T 286-1996 Standard Method of Test for Measurement of Vehicular Response to Traveled Surface Roughness HM-22; Part IIA; ASTM Designation E 1082-90(1995) R(2000)

American Society for Testing and Materials (ASTM), standard curve method standard method

ASTM E561-21 Standard Test Method for KR Curve Determination
ASTM E561-20 Standard Test Method for KR Curve Determination
ASTM E561-19 Standard Test Method for KR Curve Determination
ASTM E561-19e1 Standard Test Method for KR Curve Determination
ASTM E561-22 Standard Test Method for KR Curve Determination
ASTM E561-08e1 Standard Test Method forK-R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM E561-05e1 Standard Test Method forK-R Curve Determination
ASTM E561-15a Standard Test Method for KR Curve Determination
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method forK-R Curve Determination
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM F534-02 Standard Test Method for Bow of Silicon Wafers
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM D1336-97(2003) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D1336-97 Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D3883-04 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts
ASTM D2136-02(2012) Standard Test Method for Coated Fabricsmdash;Low-Temperature Bend Test
ASTM C485-83(2003) Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM C485-83(1999) Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM F534-97 Standard Test Method for Bow of Silicon Wafers
ASTM C485-83(2003)e1 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM F415-87(2005) Standard Test Method for Curl in Carbon Paper
ASTM E561-23 Standard Test Method for KR Curve Determination
ASTM D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM F1832-07 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D6068-96 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM E2948-14 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM F415-87(2000)e1 Standard Test Method for Curl in Carbon Paper
ASTM F415-87(2010) Standard Test Method for Curl in Carbon Paper
ASTM C485-16 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM E561-98 Standard Practice for R-Curve Determination
ASTM E561-15 Standard Test Method for KR Curve Determination
ASTM E561-08 Standard Test Method forK-R Curve Determination
ASTM D3883-99 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM D3883-04(2008) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D3883-04(2012) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM F1304-08 Standard Test Method for Deflection of Resilient Floor Tile
ASTM D3043-00e1 Standard Test Methods for Testing Structural Panels in Flexure
ASTM F1304-03 Standard Test Method for Deflection of Resilient Floor Tile
ASTM D3043-00(2006) Standard Test Methods for Structural Panels in Flexure
ASTM F1304-90(1994)e1 Standard Test Method for Deflection of Resilient Floor Tile
ASTM F1304-01 Standard Test Method for Deflection of Resilient Floor Tile
ASTM D3043-00 Standard Test Methods for Testing Structural Panels in Flexure
ASTM F1304-18 Standard Test Method for Deflection of Resilient Floor Tile
ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
ASTM F556-88(2011) Standard Test Method for Curl of Carbonless Copy Papers
ASTM C485-09 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM D3813/D3813M-98(2003) Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM D3813/D3813M-98 Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM B389-81(1998) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM B389-81(2020) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM C1699-09(2015) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D3885-04 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM C880-98 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C880-06 Standard Test Method for Flexural Strength of Dimension Stone
ASTM D2136-02 Standard Test Method for Coated Fabrics8212;Low-Temperature Bend Test
ASTM D2136-02e1 Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM C480-99(2005) Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM C480-99 Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM C1352-96(2002) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM D2136-02(2007) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM G10-10 Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM F556-88(2001) Standard Test Method for Curl of Carbonless Copy Papers
ASTM F556-88(1996)e1 Standard Test Method for Curl of Carbonless Copy Papers
ASTM C480/C480M-08 Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM G10-83(1996)e1 Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C393-00 Standard Test Method for Flexural Properties of Sandwich Constructions
ASTM F556-88(2006) Standard Test Method for Curl of Carbonless Copy Papers
ASTM E518/E518M-15 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM F1304-08(2013) Standard Test Method for Deflection of Resilient Floor Tile
ASTM C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone
ASTM G10-10(2019) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM D7774-22 Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM D3937-12 Standard Test Method for Crimp Frequency of Manufactured Staple Fibers
ASTM B478-85(2016) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM C880/C880M-15 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C1352/C1352M-15 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM D7774-17 Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM B263-99 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM D1830-17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D4338-97(2004) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4338-97(2011)e1 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4338-97 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4032-94 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D4032-94(2001) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D4032-08 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D3885-07a Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07a(2011) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D4032-08(2012) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM D3885-07a(2019) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07A(2019)e1 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07a(2015) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D4032-08(2016) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
ASTM F3141-23 Standard Guide for Total Knee Replacement Loading Profiles
ASTM D2433-07 Standard Test Methods for Rubber Thread
ASTM D204-02 Standard Test Methods for Sewing Threads
ASTM D204-97 Standard Test Methods for Sewing Threads
ASTM D204-02(2010)e1 Standard Test Methods for Sewing Threads
ASTM D2433-93(2002) Standard Test Methods for Rubber Thread
ASTM D204-02(2021) Standard Test Methods for Sewing Threads
ASTM D204-02(2016) Standard Test Methods for Sewing Threads
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D6905-03 Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D6905-03(2008) Standard Test Method for Impact Flexibility of Organic Coatings
ASTM C480/C480M-08(2015) Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM F1874-98(2011) Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
ASTM D6905-03(2012) Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D3768-22 Standard Test Method for Microcellular Urethanes—Flexural Recovery
ASTM E190-92(2008) Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM C480/C480M-16 Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM D6782-05 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM D6782-04 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM D6782-19 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM D6549-01 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-00 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6200-01(2007) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-00 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM E1082-90(2002) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1082-90(2007) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C16-03(2008) Standard Test Method for Load Testing Refractory Shapes at High Temperatures
ASTM E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C1699-09(2023) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM C1699-08 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D6200-01(2012) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM E2007-00(2006) Standard Guide for Computed Radiology (Photostimulable Luminescence (PSL) Method)
ASTM E2007-00 Standard Guide for Computed Radiology (Photostimulable Luminescence (PSL) Method)
ASTM D2258-99(2005) Standard Practice for Sampling Yarn for Testing
ASTM D2258-99 Standard Practice for Sampling Yarn for Testing
ASTM D6195-22 Standard Test Methods for Loop Tack
ASTM D2259-02(2011) Standard Test Method for Shrinkage of Yarns
ASTM C1025-91(2005) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM D2097-03(2005) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM E518-03 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM E290-97a(2004) Standard Test Methods for Bend Testing of Material for Ductility
ASTM D2097-03 Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM D2097-03(2010) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM F1575/F1575M-21 Standard Test Method for Determining Bending Yield Moment of Nails
ASTM G10-10(2015) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM C674-13(2018) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
ASTM C674-13(2023) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
ASTM D4825-97(2002) Standard Test Method for Measurement of Curl in Cut-Sized Office Paper
ASTM C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM F1575-17 Standard Test Method for Determining Bending Yield Moment of Nails
ASTM D2097-03(2023) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM D1184-98(2020) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM D2097-03(2016) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM D1830-99(2012) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D6549-06(2015) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D4882-97 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM F2771-10 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM D4882-17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM D3885-02 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D648-04 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-00a Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-01 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-07 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D2256/D2256M-09 Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM D6549-06(2011) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D7646-10(2014) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D1907-01 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM D1907-97 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM D1907/D1907M-12(2018) Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM F3359-18 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM F392-93(2004) Standard Test Method for Flex Durability of Flexible Barrier Materials
ASTM E518-00a Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D3937-07 Standard Test Method for Crimp Frequency of manufactured Staple Fibers
ASTM E518-02 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM D7264/D7264M-07 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D2136-94(1998) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM F1874-98(2004) Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
ASTM F1874-98 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
ASTM C1025-91(2010)e1 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM F392/F392M-11 Standard Test Method for Flex Durability of Flexible Barrier Materials
ASTM F384-06(2011) Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
ASTM F3359-19 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM F3359/F3359M-21 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM D3813/D3813M-98(2020) Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
ASTM E190-14 Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM C120/C120M-15a Standard Test Methods for Flexure Testing of Structural and Roofing Slate
ASTM C120/C120M-19 Standard Test Methods for Flexure Testing of Structural and Roofing Slate
ASTM E190-21 Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM C158-02(2012) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM G30-97(2009) Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
ASTM D2136-19 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM D2136-19e1 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM C1025-15 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM D3032-04 Standard Test Methods for Hookup Wire Insulation
ASTM D2969-04 Standard Test Methods for Steel Tire Cords
ASTM D2259-96 Standard Test Method for Shrinkage of Yarns
ASTM D6569-00 Standard Test Method for On-Line Measurement of pH¹
ASTM D6569-05 Standard Test Method for On-Line Measurement of pH¹
ASTM D2259-02(2006)e1 Standard Test Method for Shrinkage of Yarns
ASTM D2259-02 Standard Test Method for Shrinkage of Yarns
ASTM D2259-21 Standard Test Method for Shrinkage of Yarns
ASTM D3823-94 Standard Practice for Determining Ticket Numbers for Sewing Threads
ASTM D3823-01 Standard Practice for Determining Ticket Numbers for Sewing Threads
ASTM A1061/A1061M-09 Standard Test Methods for Testing Multi-Wire Steel Strand
ASTM D2969-04(2010) Standard Test Methods for Steel Tire Cords
ASTM D3032-10 Standard Test Methods for Hookup Wire Insulation
ASTM D3032-21 Standard Test Methods for Hookup Wire Insulation
ASTM D2259-02(2016)e1 Standard Test Method for Shrinkage of Yarns
ASTM D3823-07(2018) Standard Practice for Determining Ticket Numbers for Sewing Threads
ASTM D3032-16 Standard Test Methods for Hookup Wire Insulation
ASTM D3032-21a Standard Test Methods for Hookup Wire Insulation
ASTM D2259-02(2016) Standard Test Method for Shrinkage of Yarns
ASTM D6782-13 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM F2771-09 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM D3111-99 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D3111-10(2018) Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D747-10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D6719-10 Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering
ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM C120-06e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120-06 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120/C120M-09 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM E746-02 Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E746-93(1998) Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM D6717-07(2018) Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM D2256-02 Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM D2256-97 Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM D6482-99 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6549-06(2021) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6515-00(2010) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM E290-97a Standard Test Method for Bend Testing of Material for Ductility
ASTM C158-02(2007) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C1072-06 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM D648-06 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM C5-79(1997) Standard Specification for Quicklime for Structural Purposes
ASTM C5-03(2009) Standard Specification for Quicklime for Structural Purposes
ASTM D7264/D7264M-06 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM E290-09 Standard Test Methods for Bend Testing of Material for Ductility
ASTM C598-93(1998) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM D7264/D7264M-21 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D522/D522M-17(2021) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM E290-13 Standard Test Methods for Bend Testing of Material for Ductility
ASTM D7264/D7264M-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D648-16 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM C598-93(2019) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C158-02(2017) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D3768-11 Standard Test Method for Microcellular Urethanesmdash;Flexural Recovery
ASTM D6515-00(2016) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D522/D522M-17 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D7196-23 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
ASTM D7249/D7249M-12 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
ASTM D7249/D7249M-12e1 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
ASTM D3111-10 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D1578-93(2006)e1 Standard Test Method for Breaking Strength of Yarn in Skein Form
ASTM E1416-04 Standard Test Method for Radioscopic Examination of Weldments
ASTM E1416-09 Standard Test Method for Radioscopic Examination of Weldments
ASTM D6569-05(2009) Standard Test Method for On-Line Measurement of pH¹
ASTM D6569-14 Standard Test Method for On-Line Measurement of pH
ASTM D6569-23 Standard Test Method for On-Line Measurement of pH
ASTM A938-18 Standard Test Method for Torsion Testing of Wire
ASTM D3353-18 Standard Test Methods for Fibrous-Insulated Magnet Wire
ASTM D2969-04(2014) Standard Test Methods for Steel Tire Cords
ASTM D656-87(1999) Standard test method for online pH measurement
ASTM D1907-07 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM D1907/D1907M-12 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
ASTM D3412-01 Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM D3412-95 Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM D3412/D3412M-13(2020) Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM C598-93(2003) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2008) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C393/C393M-11 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393/C393M-11e1 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM D7249/D7249M-18 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
ASTM D7249/D7249M-20 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
ASTM D3929-03(2023) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM C598-93(2013) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C1161-02a Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161-02c Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM B820-98 Standard Test Method for Bend Test for Formability of Copper Alloy Spring Material
ASTM C120-00 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
ASTM D6515-00 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D6515-00(2004) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM G70-07 Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D522-93a(2001) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D6125-97 Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)
ASTM C1161-02b Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM B593-96 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2003) Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM D610-85(1989)e1 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
ASTM G70-81(1998) Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
ASTM B593-96(2003)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2009)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM D6515-00(2009) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM C393/C393M-06 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM B593-20 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D6109-97e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber
ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM F3260-17 Standard Test Method for Determining the Flexural Stiffness of Medical Textiles
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D522-93a Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D6125-97(2002) Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D6395-10 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
ASTM C393/C393M-20 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM F3260-18 Standard Test Method for Determining the Flexural Stiffness of Medical Textiles
ASTM D7811-13(2022) Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM C1161-18 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM B593-21 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2014)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM C1161-02c(2008) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM D3768-06 Standard Test Method for Microcellular Urethanes-Flexural Recovery
ASTM D522/D522M-13 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D6482-06 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-10 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D6482-21 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-23 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D4452-85 Standard Methods for X-Ray Radiography of Soil Samples
ASTM D4452-85(1995)e1 Standard Methods for X-Ray Radiography of Soil Samples
ASTM E1032-95 Standard Test Method for Radiographic Examination of Weldments
ASTM E1032-01 Standard Test Method for Radiographic Examination of Weldments
ASTM E1032-06 Standard Test Method for Radiographic Examination of Weldments
ASTM A938-04 Standard Test Method for Torsion Testing of Wire
ASTM A938-97 Standard Test Method for Torsion Testing of Wire
ASTM D6194-04 Standard Test Method for Glow-Wire Ignition of Materials
ASTM D1577-07 Standard Test Methods for Linear Density of Textile Fibers
ASTM A938-97(2003) Standard Test Method for Torsion Testing of Wire
ASTM D2791-93(2001) Standard Test Methods for Continuous Determination of Sodium in Water
ASTM D1577-01 Standard Test Methods for Linear Density of Textile Fibers
ASTM D1577-96 Standard Test Methods for Linear Density of Textile Fibers
ASTM D6194-03 Standard Test Method for Glow-Wire Ignition of Materials
ASTM D1577-07(2012) Standard Test Methods for Linear Density of Textile Fibers
ASTM E1032-12 Standard Test Method for Radiographic Examination of Weldments
ASTM D1577-07(2018) Standard Test Methods for Linear Density of Textile Fibers
ASTM D3353-10 Standard Test Methods for Fibrous-Insulated Magnet Wire
ASTM F2799-09 Standard Practice for Maintenance of Airplane Electrical Wiring Systems
ASTM D2791-19 Standard Test Method for On-Line Determination of Sodium in Water
ASTM D1676-17 Standard Test Methods for Film-Insulated Magnet Wire
ASTM D2791-13 Standard Test Method for On-line Determination of Sodium in Water
ASTM D6719-22 Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering
ASTM A977/A977M-07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D6549-06 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM A977/A977M-07(2013) Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D6574/D6574M-13 Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
ASTM D1423-02 Standard Test Method for Twist in Yarns by Direct-Counting
ASTM D4724-99 Standard Test Methods for Degree of Filament Yarn Entanglement by Needle Insertion Methods
ASTM D1423-99 Standard Test Method for Twist in Yarns by Direct-Counting
ASTM D4724-99(2005) Standard Test Methods for Degree of Filament Yarn Entanglement by Needle Insertion Methods
ASTM D2281-10 Standard Test Method for Evaluation of Wetting Agents by the Skein Test
ASTM D1423-02(2008) Standard Test Method for Twist in Yarns by Direct-Counting
ASTM D3929-03 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
ASTM D6482-01 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06(2011) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-10(2019) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D6482-06(2016) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM C1228-96 Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
ASTM C1228-96(2015) Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
ASTM D4476-97 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ASTM D4694-96(2003) Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
ASTM F382-99 Standard Specification and Test Method for Metallic Bone Plates
ASTM D3775-07a Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics
ASTM D3775-07 Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics
ASTM F382-99(2003)e1 Standard Specification and Test Method for Metallic Bone Plates
ASTM D4825-97(2007) Standard Test Method for Measurement of Curl in Cut-Sized Office Paper
ASTM D5418-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
ASTM D4476-03 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ASTM D3813/D3813M-98(2007) Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM D4825-97 Standard Test Method for Measurement of Curl in Cut-Sized Office Paper
ASTM D4476-09 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ASTM E2948-16a Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM E2948-22 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM D4338-97(2021) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D1184-98(2012) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies

Association Francaise de Normalisation, standard curve method standard method

NF S30-003*NF ISO 226:2004 Acoustics - Normal equal-loudness-level contours

International Organization for Standardization (ISO), standard curve method standard method

ISO 226:1987 Acoustics; Normal equal-loudness level contours
ISO 226:2023 Acoustics — Normal equal-loudness-level contours
ISO 226:2003 Acoustics - Normal equal-loudness-level contours

British Standards Institution (BSI), standard curve method standard method

BS ISO 226:2003 Acoustics - Normal equal-loudness-level contours

RU-GOST R, standard curve method standard method

GOST 9735-1987 Profile grinders. Standards of accuracy
GOST 1.3-2008 Interstate System for Standardization. Adoption rules and methods for international and regional standards as interstate standards

Korean Agency for Technology and Standards (KATS), standard curve method standard method

KS I ISO 226:2003 Acoustics-Normal equal-loudness level contours
KS I ISO 226:2014 Acoustics — Normal equal-loudness level contours
KS F 2395-2014 Standard test method for bend testing of asphalt mixtures
KS F 2566-2014(2019) Standard test method for flexural performance of fiber reinforced concrete
KS F 2491-2017 Standard test method of the flexural beam test for porous asphalt binder
KS F 2395-2014(2019) Standard test method for bend testing of asphalt mixtures
KS F 2491-2017(2022) Standard test method of the flexural beam test for porous asphalt binder
KS F 2390-2014 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS F 2413-2020 Standard test method for compressive strength of concrete after flexural strength test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, standard curve method standard method

GB/T 4963-2007 Acoustics.Normal equal-loudness-level contours
GB/T 36063-2018 Nanotechnologies—Raman shift standard curve for spectrometer calibration
GB/T 6995.2-2008 Markings for electric wires and cables.Part 2:Standard colours

SE-SIS, standard curve method standard method

SIS SMS 2027-1975 Dust separating. Standard curves for dust
Nr 39-1992

German Institute for Standardization, standard curve method standard method

DIN ISO 226:2006 Acoustics - Normal equal-loudness-level contours (ISO 226:2003);English version of DIN ISO 226:2006-04
DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system
DIN 48051-1:1959-09 Power current overhead lines; bent insulator spindles, standard design

Group Standards of the People's Republic of China, standard curve method standard method

T/SHZSAQS 00084-2022 Formaldehyde standard curve preparation technical regulations
T/CECS 1068-2022 Reliability Appraisal Standards for Hyperbolic Cooling Towers
T/CEC 559-2021 Standard for wind tunnel test methods for overhead transmission lines

Society of Automotive Engineers (SAE), standard curve method standard method

SAE J739-1991 Cutting Edge - Curved Grader, Standard June 1991
SAE ARP958D-2003 Electromagnetic Interference Measurement Antennas; Standard Calibration Method
SAE ARP958D-1999 Electromagnetic Interference Measurement Antennas; Standard Calibration Method
SAE AMS2350A-1963 STANDARD TEST METHODS
SAE AMS2350-1963 STANDARD TEST METHODS
SAE ARP958-1968 BROADBAND ELECTROMAGNETIC INTERFERENCE MEASUREMENT ANTENNAS; STANDARD CALIBRATION REQUIREMENTS AND METHODS

Professional Standard - Agriculture, standard curve method standard method

农业农村部公告第273号 Standard for the detection method of toltrazuril sulfone residues (trial implementation)

American National Standards Institute （ANSI), standard curve method standard method

ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays
ANSI/UL 2556-2005 Standard Test Methods for Wires and Cables (Bulletin)
ANSI/ASTM D1676:2017 Standard Test Methods for Film-Insulated Magnet Wire
ANSI/UL 2556-2013 Standard for Safety for Wire and Cable Test Methods

IT-UNI, standard curve method standard method

UNI S 195-1943

Professional Standard - Aviation, standard curve method standard method

HB 5434.6-1989 Method for determination of standard flexural strength of aircraft wheel brakes

SAE - SAE International, standard curve method standard method

SAE ARP958C-1997 Electromagnetic Interference Measurement Antennas Standard Calibration Method
SAE ARP958B-1996 Electromagnetic Interference Measurement Antennas (Standard Calibration Method)
SAE ARP958A-1992 Electromagnetic Interference Measurement Antennas; Standard calibration method
SAE AMS2350R-1970 STANDARD TEST METHODS
SAE AMS2350P-1970 STANDARDS TEST METHODS

CZ-CSN, standard curve method standard method

CSN 09 3351 Zc-1989

PK-PSQCA, standard curve method standard method

PS 122-1985 PAKISTAN STANDARD METHOD FOR THE DETERMINATION OF CRIMP OF YARN IN FABRIC

Indonesia Standards, standard curve method standard method

SNI ASTM C674:2010 Standart Test Methods for Flexural Properties of Ceramic Whiteware Materials1

YU-JUS, standard curve method standard method

JUS U.M1.042-1987 Determination of ultrasonic pulse velocity and calibration curve

Institute of Electrical and Electronics Engineers (IEEE), standard curve method standard method

IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions
IEEE 2772-2021 Standard for Test Method for Energy Loss of Overhead Conductor

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), standard curve method standard method

ASHRAE APPI IP CH 54-1999 Codes and Standards

工业和信息化部/国家能源局, standard curve method standard method

JB/T 13051-2017 High-power diesel engine crankshaft cleanliness limits and testing method standards

CN-STDBOOK, standard curve method standard method

图书 3-9045 Selected compilation of regulations and standards for enterprise standardization work
图书 3-9747 Principles of Standardization Law

Professional Standard - Aerospace, standard curve method standard method

QJ 2040.2-1991修改单 Calibration methods for standard leaks versus calibration methods
QJ 2040.2-1991 Calibration methods for standard leaks versus calibration methods
QJ 2040.1-1991 Calibration method for standard leak Absolute calibration method
QJ 2040.1-1991修改单 Calibration method for standard leak Absolute calibration method

VE-FONDONORMA, standard curve method standard method

NORVEN 1-5-1962

IX-FAO, standard curve method standard method

CODEX STAN 187-1993 Codex standard for carambola
CODEX STAN 201-1995 Codex standard for oats
CODEX STAN 130-1981 Codex standard for dried apricots
CODEX STAN 186-1993 Codex standard for prickly pear
CODEX STAN 198-1995 Codex standard for rice
CODEX STAN 245-2004 Codex Standard for Oranges
CODEX STAN 183-2001 Codex Standard for Papaya
CODEX STAN 223-2001 Codex Standard for Kimchi
CODEX STAN 200-1995 Codex standard for peanuts
CODEX STAN 279-1999 Codex standard for butter
CODEX STAN 225-2001 Codex Standard for Asparagus
CODEX STAN 184-1993 Codex standard for mangoes
CODEX STAN 299-2010 Codex standard for apples
CODEX STAN 143-1985 Codex standard for dates
CODEX STAN 12-2001 Codex standard for honey
CODEX STAN 197-1995 Codex standard for avocado
CODEX STAN 182-1999 Codex standard for pineapples
CODEX STAN 307-2011(En) Codex Standard for Chili Peppers
CODEX STAN 299-2010(En) Apple Codex Standards

VN-TCVN, standard curve method standard method

TCVN 5788-2009 Standard Test Method for Twist in Yarns by Direct.Counting

National Metrological Technical Specifications of the People's Republic of China, standard curve method standard method

JJF 1708-2018 On Line Calibration Specification for Coriolis Mass Flowmeters by Master Meter Method