ZH
RU
ES

Probe

Probe, Total:66 items.

In the international standard classification, Probe involves: Medical equipment, Radiation measurements, Non-destructive testing, Linear and angular measurements, Analytical chemistry, Veterinary medicine, Soil quality. Pedology, Fertilizers, Products of the textile industry, Clothes, Structures of buildings, Ceramics, Surface treatment and coating, Electricity. Magnetism. Electrical and magnetic measurements.

German Institute for Standardization, Probe

DIN 58855:2008 Medical instruments - Director type Kirschner
DIN 58858:1979 Medical instruments; director type K?nig
DIN 58855:2014 Medical instruments - Director type Kirschner
DIN 96094:2010 Medical instruments - Lachrymal probes type Bowman
DIN 6800-1:1980 Procedures in dosimetry; principles of photon and electron dosimetry with probe-type detectors
DIN 58856:1976 Medical instruments; gall stone probes type Desjardins
DIN 58856:2010 Medical instruments - Gall stone probes type Desjardins
DIN 6801-1:2019-09 Procedures of dosimetry with probe-type detectors for proton and ion radiation - Part 1: Ionization chambers
DIN EN ISO 10360-5:2020 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or sc
DIN EN ISO 18452:2016-09 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer (ISO 18452:2005); German version EN ISO 18452:2016
DIN EN 1071-1:2003 Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe profilometer; German version EN 1071-1:2003

American Society for Testing and Materials (ASTM), Probe

ASTM E499-95(2006) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM D6230-98 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM D6230-13 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM F2170-16 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes

国家市场监督管理总局、中国国家标准化管理委员会, Probe

GB/T 39518-2020 Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems

U.S. Military Regulations and Norms, Probe

ARMY MIL-F-63434 A (3)-1990 FUZE PROBE ASSEMBLY, SPRING ASSEMBLING AND PACKING (TOW)
ARMY MIL-F-63434 A VALID NOTICE 1-1989 FUZE PROBE ASSEMBLY, SPRING ASSEMBLING AND PACKING (TOW)
ARMY MIL-F-63434 A-1982 FUZE PROBE ASSEMBLY, SPRING ASSEMBLING AND PACKING (TOW)
ARMY MIL-F-63412 VALID NOTICE 1-1987 FUZE PROBE ASSEMBLY, PNEUMATIC ASSEMBLING AND PACKING (TOW)
ARMY MIL-F-63412-1981 FUZE PROBE ASSEMBLY, PNEUMATIC ASSEMBLING AND PACKING (TOW)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Probe

GB/T 36052-2018 Surface chemical analysis—Data transfer format for scanning probe microscopy
GB/T 16857.5-2017 Geometrical product specifications(GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 5:CMMs using single or multiple stylus contacting probing systems

SAE - SAE International, Probe

SAE AS4251-1988 Coupling Assemblies@ Non- Locking Probe Style@ Self-Aligning@ Self- Sealing Disconnects

Society of Automotive Engineers (SAE), Probe

SAE AS4251-2013 Coupling Assemblies, Non-Locking Probe Style, Self-Aligning, Self-Sealing Disconnects

Ningxia Provincial Standard of the People's Republic of China, Probe

DB64/T 1599-2019 Real-time fluorescence quantitative PCR method for detection of Chlamydia psittaci with TaqMan MGB probe

British Standards Institution (BSI), Probe

BS ISO 28600:2011 Surface chemical analysis. Data transfer format for scanning-probe microscopy
BS ISO 23729:2022 Surface chemical analysis. Atomic force microscopy. Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
BS ISO 13083:2015 Surface chemical analysis. Scanning probe microscopy. Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
21/30412880 DC BS ISO 23729. Surface chemical analysis. Atomic force microscopy. Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
BS ISO 13095:2014 Surface Chemical Analysis. Atomic force microscopy. Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement
BS EN ISO 10360-5:2010 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs using single and multiple stylus contacting probing systems
BS EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture - Areal - Nominal characteristics of non-contact (confocal chromatic probe) instruments
BS EN ISO 18452:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of thickness of ceramic films by contact-probe profilometer
BS EN ISO 25178-605:2014 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (point autofocus probe) instruments
BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method

RU-GOST R, Probe

GOST 8.593-2009 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for verification
GOST R 8.635-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for calibration
GOST 30387-1995 Knitted fabrics and garments. Methods for determination of appearance and mass part of raw material
GOST R 8.700-2010 State system for ensuring the uniformity of measurements. Method of surface roughness effective height measurements by means of scanning probe atomic force microscope

Inner Mongolia Provincial Standard of the People's Republic of China, Probe

DB15/T 1383-2018 Technical specification for corn pointer sprinkler irrigation in West Liaohe Plain

International Organization for Standardization (ISO), Probe

ISO 28600:2011 Surface chemical analysis - Data transfer format for scanning-probe microscopy
ISO 23729:2022 Surface chemical analysis — Atomic force microscopy — Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
ISO 13083:2015 Surface chemical analysis - Scanning probe microscopy - Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
ISO 13095:2014 Surface Chemical Analysis - Atomic force microscopy - Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement
ISO 18452:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer
ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
ISO/DIS 25178-602:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments

Association Francaise de Normalisation, Probe

NF A09-326:1987 Non-destructive testing - Ultrasonic testing - Method of evaluation under working of ultrasonic beam characteristics of contact probe
NF E05-031-605*NF EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture : areal - Part 605 : nominal characteristics of non-contact (point autofocus probe) instruments
NF A92-801-1:2003 Advanced technical ceramics - Methods of test for ceramic coatings - Part 1 : determination of coating thickness by contact probe filometer.

Japanese Industrial Standards Committee (JISC), Probe

JIS R 1636:1998 Test method for thickness of fine ceramic thin films -- Film thickness by contact probe profilometer

ES-UNE, Probe

UNE-EN ISO 18452:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer (ISO 18452:2005) (Endorsed by AENOR in June of 2016.)

European Committee for Standardization (CEN), Probe

EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014)
DD ENV 1071-1-1993 Advanced Technical Ceramics - Methods of Test for Ceramic Coatings - Part 1 : Determination of Coating Thickness by Contact Probe Profilometer

Danish Standards Foundation, Probe

DS/EN 1071-1:2003 Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer

Lithuanian Standards Office , Probe

LST EN 1071-1-2003 Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer

AT-ON, Probe

ONORM ENV 1071-1-1993 Advanced technical ceramics. Methods of test for ceramic coatings. Part 1: Determination of coating thickness by contact probe profilometer

Aerospace, Security and Defence Industries Association of Europe (ASD), Probe

ASD-STAN PREN 2591-D15-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D15 - Test Probe Damage (Female Contact) (Issue P 1)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Probe

GB/T 33523.602-2022 Geometrical product specifications (GPS)—Surface texture: Areal—Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
GB/T 33523.605-2022 Geometrical product specifications (GPS)—Surface texture: Areal—Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments

Korean Agency for Technology and Standards (KATS), Probe

KS B ISO 10360-5:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification test for coordinate measuring machines(CMM)-Part 5:CMMs using multiple-stylus probing systems
KS B ISO 10360-5:2014 Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 5: CMMs using single and multiple stylus contacting probing systems

Standard Association of Australia （SAA）, Probe

AS 61010.031:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC 61010-031:2002 MOD)