ZH

RU

ES

dish casting

dish casting, Total:175 items.

In the international standard classification, dish casting involves: Cutting tools, Microbiology, Refractories, Chipless working equipment, Construction materials, Materials and articles in contact with foodstuffs, Kitchen equipment, Sewing machines and other equipment for the clothing industry, Raw materials for rubber and plastics, Plastics, Earthworks. Excavations. Foundation construction. Underground works, Machine tool systems, Road vehicle systems, Sports equipment and facilities, Products of non-ferrous metals, Construction equipment, Ceramics, Bridge construction, Tunnel construction, Structures of buildings, Components and accessories for telecommunications equipment, Medical equipment, Switchgear and controlgear, Road engineering, Rubber and plastics products, Elements of buildings, Insulation, Ladders, Installations in buildings, Heat recovery. Thermal insulation, Non-ferrous metals.


CZ-CSN, dish casting

  • CSN 22 4583-1985 Grinding wheels. Disk-shaped grinding wheels for shoemaking milling cutter sharpening. Dimensions
  • CSN 22 6218-1983 Cast four post prese tool sets.Construction and dimensions
  • CSN 22 6215-1983 Cast rear post press tool sets.Construction and dimensions
  • CSN 22 6210-1983 Cast centre post presa tool sets. Con-struction and dimensions
  • CSN ISO 1811-1:1993 Copper and copper alloys. Selection and preparation of samples for chemical analysis. Part 1: Sampling of cast unwrought products

Military Standards (MIL-STD), dish casting

German Institute for Standardization, dish casting

  • DIN 10103:1993 Microbiological analysis of meat and meat products; determination of mesophilic sulfite reducting clostridia; method with poured plates (reference method)
  • DIN EN ISO 8442-8:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware (ISO 8442-8:2000); German version EN ISO 8442-8:2000
  • DIN 16716:1992 Compression-, injection- and diecasting moulds; guide bushes of steel
  • DIN ISO 6313:1981 Road vehicles; brake linings; effects of heat on dimensions and form of disc brake pads; test procedure
  • DIN EN ISO 1927-4:2013-03 Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables (ISO 1927-4:2012); German version EN ISO 1927-4:2012
  • DIN EN 13791:2008 Assessment of in-situ compressive strength in structures and precast concrete components; English version of DIN EN 13791:2008-05
  • DIN 1211-2:2003 Step irons for staggered manhole steps - Part 2: Precast concrete manhole step irons
  • DIN EN 14650:2005 Precast concrete products - General rules for factory production control of metallic fibered concrete; German version EN 14650:2005
  • DIN EN 198:2008-11 Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods; German version EN 198:2008
  • DIN EN 249:2010-11 Sanitary appliances - Shower trays made from crosslinked cast acrylic sheets - Requirements and test methods; German version EN 249:2010
  • DIN 1212-2:2003 Step irons with upstand for staggered manhole steps - Part 2: Precast concrete manhole step irons
  • DIN EN ISO 8442-7:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000); German version EN ISO 8442-7:2000

European Committee for Electrotechnical Standardization(CENELEC), dish casting

ESDU - Engineering Sciences Data Unit, dish casting

RU-GOST R, dish casting

  • GOST R 52541-2006 Refractory castables. Preparation of test pieces
  • GOST 22349-1977 Setting casting resins. Preparation of test specimens
  • GOST 13531-1974 Concrete placers for precast reinforced concrete factories
  • GOST 11586-2005 Refractories for bottom pouring of steel. Specifications
  • GOST 11586-1969 Refractories for bottom pouring of steel. Specifications
  • GOST R ISO 6312-1993 Road vehicles. Brake lilings. Shear strength of disc brake pag and drum brake shoe assemblies. Test procedure
  • GOST R ISO 6312-2007 Road vehicles. Brake linings. Shear test procedure for disc brake pad and drum brake shoe assemblies
  • GOST ISO 1927-4-2021 Monolithic (unshaped) refractory products. Determination of consistency of castables
  • GOST R 53066-2008 Refractories for steel pouring. Stopper refractories. Specifications
  • GOST 19679-1974 Plastics. Preparation of injection moulded and compression moulded specimens for optical testing of thermoplastics
  • GOST 5341-1998 Alumino-silicate refractories for linings of steel-teeming ladles. Specifications

International Organization for Standardization (ISO), dish casting

  • ISO 16915:2003 Tools for moulding - Sprue pullers
  • ISO 1927-4:2012 Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables

Association Francaise de Normalisation, dish casting

  • NF E63-523*NF ISO 16915:2004 Tools for moulding - Sprue pullers
  • NF B40-376:1986 Refractory products. Prepared unshaped materials. Dense and insulating castables. Consistency test.
  • NF P19-826*NF EN 13198:2003 Precast concrete products - Street furniture and garden products
  • NF B40-378:1982 Refractory products - Unshaped materials - Control of the aptitude of gunning for castables dense and insulating
  • NF B40-003-4*NF EN ISO 1927-4:2013 Monolithic (unshaped) refractory products - Part 4 : determination of consistency of castables
  • NF C64-450:1987 Cast aluminium alloy enclosures for gas-filled high-voltage swichtgear and controlgear.
  • NF C64-450/A2:1993 Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear.
  • NF P98-433:1991 Road safety barriers. Cast in place concrete separators and walls. Special steel accessories.
  • NF P38-401:1980 Expanded polystyrene case-bay fillers for concrete floors with prefabricated binders and dividing floor.
  • NF EN 249:2010 Appareils sanitaires - Receveurs de douche en feuilles d'acrylique réticulées coulées - Prescriptions et méthodes d'essai
  • NF A05-171*NF ISO 18070:2016 Corrosion of metals and alloys - Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steels
  • NF T54-401-1*NF EN ISO 7823-1:2003 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1 : cast sheets

Korean Agency for Technology and Standards (KATS), dish casting

  • KS B ISO 16915:2005 Tools for moulding-Sprue pullers
  • KS B ISO 16915:2015 Tools for moulding-Sprue pullers
  • KS L 3519-2017(2022) Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
  • KS L 3519-1987 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
  • KS L 3519-1982 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
  • KS L 3519-2017 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
  • KS L 3519-1997 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
  • KS F ISO 9883:2001 Performance standards in building-Performance test for precast concrete floors-Behaviour under concentrated load
  • KS F ISO 9882:2001 Performance standards in building-Performance test for precast concrete floors-Behaviour under non-concentrated load

Japanese Industrial Standards Committee (JISC), dish casting

Electronic Components, Assemblies and Materials Association, dish casting

NL-NEN, dish casting

  • NEN 786-1966 Engineering drawing. Indications on drawings for castings

Professional Standard - Light Industry, dish casting

  • QB/T 2866-2007 Footwear machines. Polyurethane pouring moulding machine

Professional Standard - Commodity Inspection, dish casting

  • SN/T 3979-2014 Determination of penicillinase in milk and dairy products.Cylinder plate method
  • SN 0668-1997 Method for the determination of colistin residues in meats and meat products for export.Cylinder plate method
  • SN/T 0669-2011 Determination of gentamycin residues in meats and meat products for export.Cylinder plate method
  • SN 0666-1997 Method for the determination of oleandomycin residues in meats and meat products for export.Cylinder plate method
  • SN 0669-1997 Method for the determination of gentamycin redidues in meats and meat products for export.Cylinder plate method
  • SN 0671-1997 Method for the determination of lincomycin residues in meats nd meat products for export.Cylinder plate method
  • SN/T 0666-2011 Determination of oleandomycin residues in meats and meat products for export.Cylinder plate method
  • SN/T 1134-2002 Cup and saucer method for the determination of virginicin residues in meat and meat products for import and export

American Welding Society (AWS), dish casting

  • WRC 215:1976 Part 1: Development of Design Rules for Dished Pressure Vessel Heads

HU-MSZT, dish casting

Professional Standard - Machinery, dish casting

  • JB/T 3812-2015 Disc springs for disc brakes of mine hoists and mining winches

IT-UNI, dish casting

British Standards Institution (BSI), dish casting

  • BS EN 13693:2004+A1:2009 Precast concrete products - Special roof elements
  • BS EN 13693:2004 Precast concrete products - Special roof elements
  • BS EN 13693:2004+A1:2009(2010) Precast concrete products - Special roof elements
  • BS 643:1970 Specification for white metal ingots for capping steel wire ropes
  • DD ENV 1402-4-2000 Unshaped refractory products. Determination of consistency of castables
  • BS EN ISO 1927-4:2012 Monolithic (unshaped) refractory products. Determination of consistency of castables
  • BS EN 13791:2019 Assessment of in-situ compressive strength in structures and pre-cast concrete components
  • BS EN 13791:2007 Assessment of in-situ compressive strength in structures and pre-cast concrete components
  • BS EN 14650:2005 Precast concrete products - General rules for factory production control of metallic fibered concrete
  • BS EN 50089:1992 Specification for cast resin partitions for metal-enclosed gas-filled high-voltage switchgear and controlgear

Canadian Standards Association (CSA), dish casting

  • CSA A23.4-05-2005 Precast concrete Materials and construction Fourth Edition;
  • CSA A23.4-05-2006 B閠on pr閒abriqu? Constituants et ex閏ution des travaux quatri鑝e 閐ition;

Group Standards of the People's Republic of China, dish casting

  • T/CCPA 27-2022 Technical specification for control of cracking in cast-in-situ concrete structures
  • T/GSMA 2-2020 Quality control specification for sports areas with in-situ casting synthetic surfaces
  • T/CBMF 163-2022 Technical specification for control of cracking in cast-in-situ concrete structures
  • T/JSTERA 28-2021 Technical specification for web crack control of cantilever cast-in-place box girder bridge on expressway

RO-ASRO, dish casting

  • STAS 1580/3-1989 SILICO-ALUMINOUS REFRACTORY PRODUCTS FOR CASTING LADLES Quality technical, requirements
  • SR 1580-2-1995 Silica-alumina and silica-zirconic refractory products for casting ladles. Casting products. Shapes and dimensions

ACI - American Concrete Institute, dish casting

  • ACI 550.1R-2001 Emulating Cast-in-Place Detailing in Precast Concrete Structures
  • ACI 550.1R-2009 Guide for Emulating Cast-in-Place Detailing for Seismic Design of Precast Concrete Structures

工业和信息化部, dish casting

  • YB/T 4576-2016 Castables and prefabricated bricks for large pellet rotary kiln

Danish Standards Foundation, dish casting

  • DS/EN 12875-4:2006 Mechanical dishwashing resistance of utensils - Part 4: Rapid test for domestic ceramic articles
  • DS/EN ISO 1927-4:2013 Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables
  • DS/EN 50089/A1:2005 Cast resin partitions for metal enclosed gas-filled high-voltage switchgear and controlgear
  • DS/EN 50089:2005 Cast resin partitions for metal enclosed gas-filled high voltage switchgear and controlgear
  • DS/EN 249:2010 Sanitary appliances - Shower trays made from crosslinked cast acrylic sheets - Requirements and test methods

Lithuanian Standards Office , dish casting

  • LST EN 12875-4-2006 Mechanical dishwashing resistance of utensils - Part 4: Rapid test for domestic ceramic articles
  • LST EN 50089+A1-2001 Cast resin partitions for metal enclosed gas-filled high-voltage switchgear and controlgear
  • LST EN ISO 1927-4:2013 Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables (ISO 1927-4:2012)
  • LST EN 249-2010 Sanitary appliances - Shower trays made from crosslinked cast acrylic sheets - Requirements and test methods

American Society for Testing and Materials (ASTM), dish casting

  • ASTM C974-87(2004) Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
  • ASTM C862-01 Standard Practice for Preparing Refractory Concrete Specimens by Casting
  • ASTM C862-91(1997) Standard Practice for Preparing Refractory Concrete Specimens by Casting
  • ASTM C862-02(2008) Standard Practice for Preparing Refractory Concrete Specimens by Casting
  • ASTM C862-16 Standard Practice for Preparing Refractory Concrete Specimens by Casting
  • ASTM C974-87(2009) Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
  • ASTM C974-87(2015) Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
  • ASTM C903-10 Standard Practice for Preparing Refractory Castable Specimens by Cold Gunning
  • ASTM B179-10 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
  • ASTM B179-11 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
  • ASTM B179-11e1 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
  • ASTM C450-99e1 Standard Practice for Prefabrication and Field Fabrication of Thermal Insulating Fitting Covers for NPS Piping, Vessel Lagging, and Dished Head Segments
  • ASTM C450-99 Standard Practice for Prefabrication and Field Fabrication of Thermal Insulating Fitting Covers for NPS Piping, Vessel Lagging, and Dished Head Segments

Professional Standard - Aerospace, dish casting

  • QJ 1301-1987 Production Manual of Polyether Polyurethane Casting Rubber Products

BE-NBN, dish casting

BELST, dish casting

  • STB 1326-2002 Beams reinforced concrete for precast - in - situ floors. Specifications
  • STB 1327-2002 Block concrete hollow for precast - in - situ floors. Specifications

VN-TCVN, dish casting

  • TCVN 2360-1978 Ellip soidal dished hedes flanged made of steel for vessels apparatus and boilers.Basic dimensions

Professional Standard - Ferrous Metallurgy, dish casting

  • YB/T 5202-1993 Consistency determination and sample preparation method of dense refractory castable
  • YB/T 5202.1-2003 Preparation of specimen for unshaped refractories Part1:Refractory castables

Professional Standard - Agriculture, dish casting

Jiangsu Provincial Standard of the People's Republic of China, dish casting

  • DB32/T 3947-2020 Technical specification for control of concrete shrinkage cracks in open cut and cast-in-place tunnels

未注明发布机构, dish casting

ES-UNE, dish casting

  • UNE-EN ISO 1927-4:2012 Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables (ISO 1927-4:2012) (Endorsed by AENOR in January of 2013.)

Professional Standard - Coal, dish casting

  • MT/T 351.2-2005 Preparation method of cast sample of polyurethane cold glue of rubber sheathed flexible cables intended to be used in coal mines
  • MT/T 352-1994 Preparation method of casting sample of rubber sheath cable polyurethane cold patching glue for coal mine

European Committee for Standardization (CEN), dish casting

  • EN 13791:2007 Assessment of in-situ compressive strength in structures and precast concrete components
  • EN 13693:2004 Precast concrete products - Special roof elements (Incorporates Amendment A1: 2009)
  • EN 13791:2019 Assessment of in-situ compressive strength in structures and precast concrete components
  • EN 14650:2005 Precast concrete products - General rules for factory production control of metallic fibered concrete
  • DD ENV 1402-4-1999 Unshaped Refractory Products - Part 4: Determination of Consistency of Castables Superseded by EN 1402-4: 2003
  • EN ISO 1927-4:2012 Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables

US-FCR, dish casting

Standard Association of Australia (SAA), dish casting

(U.S.) Ford Automotive Standards, dish casting

AENOR, dish casting

  • UNE-EN 249:2010 Sanitary appliances - Shower trays made from crosslinked cast acrylic sheets - Requirements and test methods
  • UNE-EN 50089:1996 CAST RESIN PARTITIONS FOR METAL ENCLOSED GAS-FILLES HIGH VOLTAGE SWITCHGEAR AND CONTROLGEAR.

AT-OVE/ON, dish casting

  • OVE EN 50089-2021 Cast resin partitions for metal enclosed gas-filled high-voltage switchgear and controlgear (english version)

WRC - Welding Research Council, dish casting

  • BULLETIN 215-1976 DEVELOPMENT OF DESIGN RULES FOR DISHED PRESSURE VESSEL HEADS; THE EFFECT OF GEOMETRICAL VARIATIONS ON THE LIMIT PRESSURES FOR 2:1 ELLIPSOIDAL HEAD VESSELS UNDER INTERNAL PRESSURE

国家市场监督管理总局、中国国家标准化管理委员会, dish casting

  • GB/T 40911.3-2021 Plastics—Poly(methyl methacrylate) sheets—Types, dimensions and characteristics—Part 3:Continuous cast sheets

Shandong Provincial Standard of the People's Republic of China, dish casting

  • DB37/T 5147-2019 Technical specification for application of prefabricated steel wire grid insulation board cast-in-place concrete cavity-free composite wall insulation system




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved