ZH
RU
ES

bipolar curve

bipolar curve, Total:254 items.

In the international standard classification, bipolar curve involves: Valves, Electrical and electronic testing, Corrosion of metals, Iron and steel products, Technical drawings, Vocabularies, Testing of metals, Woodworking equipment, Electronic components in general, Construction industry, Surface treatment and coating, Aircraft and space vehicles in general, Integrated circuits. Microelectronics, Acoustics and acoustic measurements, Fasteners for aerospace construction, Hand-held tools, Road vehicle systems, Paper and board, Rotating machinery, Semiconducting materials, Printed circuits and boards, Analytical chemistry, Electricity. Magnetism. Electrical and magnetic measurements, Radiocommunications, Products of the chemical industry, Semiconductor devices, Electromagnetic compatibility (EMC), Lamps and related equipment, Medical equipment, Optoelectronics. Laser equipment, Rubber and plastics products, Electrical accessories, Chipless working equipment, Electromechanical components for electronic and telecommunications equipment, Gears.

Defense Logistics Agency, bipolar curve

• DLA MS24524 REV J VALID NOTICE 3-2005 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED
• DLA MS24524 REV J VALID NOTICE 2-2000 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED
• DLA MS24524 REV J VALID NOTICE 1-1993 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED
• DLA MS24524 REV J-1987 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED
• DLA MS35799 REV C VALID NOTICE 3-2004 ROD, CONTINUOUS THREAD, DOUBLE ARMING, HOT GALVANIZED, (POLE LINE)
• DLA MS35799 REV C NOTICE 2-1999 ROD, CONTINUOUS THREAD, DOUBLE ARMING, HOT GALVANIZED, (POLE LINE)
• DLA MS35799 REV C VALID NOTICE 1-1993 ROD, CONTINUOUS THREAD, DOUBLE ARMING, HOT GALVANIZED, (POLE LINE)
• DLA MS35799 REV C-1987 ROD, CONTINUOUS THREAD, DOUBLE ARMING, HOT GALVANIZED, (POLE LINE)
• DLA SMD-5962-87705 REV B-2005 MICROCIRCUITS, BIPOLAR, VMEBUS CONTROLLER, MONOLITHIC SILICON
• DLA SMD-5962-93226 REV H-2006 MICROCIRCUIT, DIGITAL, BIPOLAR, DUAL CHANNEL, BUS TRANSCEIVER, MONOLITHIC SILICON
• DLA SMD-5962-95582 REV B-2008 MICROCIRCUIT, DIGITAL, BIPOLAR, TTL, DUAL 2-LINE TO 4-LINE DECODERS/DEMULTIPLEXERS, MONOLITHIC SILICON
• DLA SMD-5962-89930 REV C-2003 MICROCIRCUIT, LINEAR, DUAL POLARITY TRACKING VOLTAGE REGULATOR, MONOLITHIC SILICON
• DLA SMD-5962-86720 REV A-2001 MICROCIRCUIT, DIGITAL, BIPOLAR, BUS TRANSCEIVER, MONOLITHIC SILICON
• DLA SMD-5962-88763-1990 MICROCIRCUIT, LINEAR, DUAL-POLARITY TRACKING VOLTAGE REGULATOR, MONOLITHIC SILICON
• DLA SMD-5962-88763 REV A-2010 MICROCIRCUIT, LINEAR, DUAL POLARITY TRACKING VOLTAGE REGULATOR, MONOLITHIC SILICON
• DLA SMD-5962-89930 REV D-2011 MICROCIRCUIT, LINEAR, DUAL POLARITY TRACKING VOLTAGE REGULATOR, MONOLITHIC SILICON
• DLA SMD-5962-89930 REV E-2013 MICROCIRCUIT, LINEAR, DUAL POLARITY TRACKING VOLTAGE REGULATOR, MONOLITHIC SILICON
• DLA MS27723 REV C VALID NOTICE 3-2005 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS
• DLA MS27723 REV C VALID NOTICE 2-2000 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS
• DLA MS27723 REV C VALID NOTICE 1-1993 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS
• DLA MS27723 REV C-1987 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS
• DLA MS27785 REV C VALID NOTICE 3-2005 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS
• DLA MS27785 REV C VALID NOTICE 2-2000 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS
• DLA MS27785 REV C VALID NOTICE 1-1993 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS
• DLA MS27785 REV C-1987 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS
• DLA SMD-5962-87769 REV A-2001 MICROCIRCUIT, DIGITAL, BIPOLAR, DUAL LINE DRIVERS, MONOLITHIC SILICON
• DLA SMD-5962-86714 REV C-2009 MICROCIRCUIT, DIGITAL, BIPOLAR, QUAD BUS TRANSCEIVER, MONOLITHIC SILICON
• DLA SMD-5962-87534 REV D-2011 MICROCIRCUITS, DIGITAL, BIPOLAR, QUAD BUS TRANSCEIVER, MONOLITHIC SILICON
• DLA SMD-5962-87657 REV D-2012 MICROCIRCUIT, LINEAR, BIPOLAR, RF/IF AMPLIFIER WITH AGC, MONOLITHIC SILICON
• DLA SMD-5962-86723 REV C-2001 MICROCIRCUIT, DIGITAL, BIPOLAR, OCTAL, 3-STATE, BIDIRECTIONAL, BUS TRANSCEIVER, MONOLITHIC SILICON
• DLA SMD-5962-89490 REV C-2006 MICROCIRCUIT, HYBRID, LINEAR, DUAL POSITIVE AND NEGATIVE 15-VOLT, 12-VOLT, AND 5-VOLT REGULATOR
• DLA SMD-5962-78019 REV E-2006 MICROCIRCUIT, LINEAR, DUAL, HIGH SPEED, VOLTAGE COMPARATOR, MONOLITHIC SILICON
• DLA SMD-5962-88581 REV A-2006 MICROCIRCUIT, LINEAR, BIPOLAR HEX NTDS DRIVER, MONOLITHIC SILICON
• DLA SMD-5962-88582 REV B-2006 MICROCIRCUIT, LINEAR, BIPOLAR HEX NTDS RECEIVER, MONOLITHIC SILICON
• DLA SMD-5962-87534 REV C-2005 MICROCIRCUITS, DIGITAL, BIPOLAR, QUAD BUS TRANSCEIVER, MONOLITHIC SILICON
• DLA SMD-5962-98611 REV A-2007 MICROCIRCUIT, DIGITAL, BIPOLAR, TTL, LINE DRIVERS, MONOLITHIC SILICON
• DLA SMD-5962-86868 REV C-2011 MICROCIRCUITS, DIGITAL, BIPOLAR, OCTAL BUS TRANSCEIVERS, MONOLITHIC SILICON
• DLA MS27723 REV D-2011 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS
• DLA MS27785 REV D-2011 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS
• DLA MS27786 REV D-2011 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS
• DLA SMD-5962-95581 REV B-2008 MICROCIRCUIT, DIGITAL, BIPOLAR, TTL, 4-LINE TO 16-LINE DECODERS/DEMULTIPLEXERS, MONOLITHIC SILICON
• DLA SMD-5962-90513-1990 MICROCIRCUIT, DIGITAL, BIPOLAR, PARITY BUS TRANSCEIVERS, MONOLITHIC SILICON
• DLA SMD-5962-86714 REV B-2002 MICROCIRCUIT, DIGITAL, BIPOLAR, QUAD BUS TRANSCEIVER, MONOLITHIC SILICON
• DLA SMD-5962-86868 REV B-2005 MICROCIRCUITS, DIGITAL, BIPOLAR, OCTAL BUS TRANSCEIVERS, MONOLITHIC SILICON
• DLA MIL-M-38510/81 D VALID NOTICE 1-2010 Microcircuits, Digital, Bipolar, Schottky TTL, Line Drivers, Monolithic Silicon
• DLA MS27782 REV C VALID NOTICE 3-2005 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS
• DLA MS27782 REV C VALID NOTICE 2-2000 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS
• DLA MS27782 REV C VALID NOTICE 1-1993 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS
• DLA MS27782 REV C-1987 SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS
• DLA MS27788 REV C VALID NOTICE 3-2005 SWITCH, TOGGLE, TOW POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS
• DLA MS27788 REV C VALID NOTICE 2-2000 SWITCH, TOGGLE, TOW POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS
• DLA MS27788 REV C VALID NOTICE 1-1993 SWITCH, TOGGLE, TOW POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS
• DLA MS27788 REV C-1987 SWITCH, TOGGLE, TOW POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS
• DLA SMD-5962-88583 REV B-2006 MICROCIRCUIT LINEAR, BIPOLAR, HEX NTDS, FAST DRIVER, MONOLITHIC SILICON
• DLA SMD-5962-87595 REV C-2009 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, BUS TRANSCEIVER, MONOLITHIC SILICON
• DLA MIL-PRF-28776/6 E VALID NOTICE 1-2010 Relays, Hybrid, Established Reliability, DPDT, Low Level to 1.0 Ampere Internal Mosfet drive with Zener Diode Gate Protection (Electromechanical Output) Diode Coil Suppression and Terminals with 0.100 Grid Lead Spacing
• DLA SMD-5962-81023 REV L-2006 MICROCIRCUIT, LINEAR, BI-FET OPERATIONAL AMPLIFIERS, MONOLITHIC SILICON
• DLA SMD-5962-95574 REV A-2006 MICROCIRCUIT, DIGITAL, BIPOLAR, TTL QUADRUPLE 2-INPUT POSITIVE-OR GATE, MONOLITHIC SILICON
• DLA SMD-5962-88707 REV C-1992 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, PI-BUS TRANSCEIVER, MONOLITHIC SILICON
• DLA SMD-5962-89525 REV B-2004 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, BUS INTERFACE FLIP-FLOP, MONOLITHIC SILICON
• DLA SMD-5962-95537 REV A-2001 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, QUADRUPLE D-TYPE FLIP-FLOPS WITH CLEAR, MONOLITHIC SILICON
• DLA SMD-5962-89553 REV B-2012 MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, OCTAL BUS TRANSCEIVERS, MONOLITHIC SILICON
• DLA MIL-PRF-39016/20 J VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 1.0 Ampere with Internal Diodes for Coil Transient Suppression and Polarity Reversal Protection
• DLA SMD-5962-96697 REV A-2008 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 1-LINE TO 8-LINE CLOCK DRIVER, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
• DLA SMD-5962-88584 REV B-2002 MICROCIRCUIT, LINEAR, BIPOLAR QUAD NTDS FAST/ANEW RECEIVER, MONOLITHIC SILICON
• DLA SMD-5962-88722-1988 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, BUFFER/LINE DRIVER, MONOLITHIC SILICON
• DLA SMD-5962-89553 REV A-2005 MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, OCTAL BUS TRANSCEIVERS, MONOLITHIC SILICON
• DLA SMD-5962-90937 REV C-2008 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, QUADRUPLE BUS BUFFER GATE WITH THREESTATE OUTPUTS, TTL COMPATIBLE, MONOLITHIC SILICON
• DLA SMD-5962-89525 REV C-2012 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, BUS INTERFACE FLIP-FLOP, MONOLITHIC SILICON
• DLA DSCC-VID-V62/04757 REV A-2011 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 1-LINE TO 10-LINE CLOCK DRIVER WITH 3-STATE OUTPUTS, MONOLITHIC SILICON
• DLA MIL-PRF-39016/30 F VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 1.0 Ampere (Latching) with Internal Diodes for Coil Transient Suppression and Polarity Reversal Protection
• DLA SMD-5962-84030 REV E-2005 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED LOW-POWER SCHOTTKY TTL, BUS TRANSCEIVERS, MONOLITHIC SILICON
• DLA SMD-5962-89748 REV A-2005 MICROCIRCUITS, DIGITAL, BIPOLAR, LOW POWER SCHOTTKY TTL, OCTAL BUS TRANSCEIVERS, OPEN COLLECTOR OUTPUTS, MONOLITHIC SILICON
• DLA SMD-5962-91597-1993 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, TRIPLE BIDIRECTIONAL LATCHED BUS TRANSCEIVER, MONOLITHIC SILICON
• DLA MIL-PRF-39016/38 C VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 2 Amperes (0.150-Inch Terminal Spacing), with Internal Diodes for Coil Transient Suppression and Reverse Polarity Protection
• DLA SMD-5962-89687 REV C-2004 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED LOW-POWER SCHOTTKY, TTL, OCTAL BUS TRANSCEIVERS AND REGISTERS, WITH INVERTING THREE-STATE AND OPEN-COLLECTOR OUTPUTS, MONOLITHIC SILICON
• DLA MIL-M-38510/348 C-2004 MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, BUS TRANSCEIVERS WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
• DLA SMD-5962-90633 REV A-2006 MICROCIRCUIT, LINEAR, QUAD BIFET, OPERATIONAL AMPLIFIER, MONOLITHIC SILICON
• DLA SMD-5962-88737 REV C-2008 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY, TTL, OCTAL BUS TRANSCEIVERS, MONOLITHIC SILICON
• DLA SMD-5962-95842 REV A-2007 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 18-BIT BUS-INTERFACE FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
• DLA SMD-5962-87767 REV B-2008 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, OCTAL BUFFER AND LINE DRIVER WITH OPEN-COLLECTOR OUTPUTS, MONOLITHIC SILICON
• DLA DSCC-VID-V62/06609-2006 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 16-BIT BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
• DLA SMD-5962-90506 REV A-2005 MICROCIRCUIT, DIGITAL, BIPOLAR, OCTAL BUS TRANSCEIVER WITH THREE-STATE NONINVERTING OUTPUTS, MONOLITHIC SILICON
• DLA SMD-5962-88727 REV C-2008 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY TTL, OCTAL BUS TRANSCEIVERS, MONOLITHIC SILICON
• DLA DSCC-VID-V62/03620 REV A-2009 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 36-BIT BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
• DLA DSCC-VID-V62/06609 REV A-2013 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 16-BIT BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
• DLA SMD-5962-88753 REV C-2011 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, OCTAL BUS TRANSCEIVERS AND REGISTERS, MONOLITHIC SILICON
• DLA SMD-5962-90506 REV B-2012 MICROCIRCUIT, DIGITAL, BIPOLAR, OCTAL BUS TRANSCEIVER WITH THREE-STATE NONINVERTING OUTPUTS, MONOLITHIC SILICON
• DLA MIL-PRF-39016/29 G VALID NOTICE 1-2011 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 1.0 Ampere (Latching) with Internal Diodes for Coil Transient Suppression
• DLA MIL-PRF-39016/19 H VALID NOTICE 1-2011 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 1 Ampere with Internal Diode for Coil Transient Suppression and Polarity Reversal Protection, Terminals 0.100- Inch Grid Pattern
• DLA SMD-5962-88648 REV E-2002 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY, QUADRUPLE DIFFERENTIAL LINE DRIVER, MONOLITHIC SILICON
• DLA SMD-5962-88649 REV E-2005 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY, QUADRUPLE DIFFERENTIAL LINE RECEIVER, MONOLITHIC SILICON
• DLA SMD-5962-88753 REV B-2005 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, OCTAL BUS TRANSCEIVERS AND REGISTERS, MONOLITHIC SILICON
• DLA SMD-5962-90889 REV C-2008 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, QUADRUPLE BUS BUFFER GATE, TTL COMPATIBLE, MONOLITHIC SILICON
• DLA DSCC-VID-V62/04602 REV E-2012 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-V 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS, MONOLITHIC SILICON
• DLA MIL-M-38510/348 C VALID NOTICE 1-2009 Microcircuits, Digital, Bipolar, Advanced Schottky TTL, Bus Transceivers with Three-State Outputs, Monolithic Silicon
• DLA MIL-M-38510/348 C VALID NOTICE 2-2013 Microcircuits, Digital, Bipolar, Advanced Schottky TTL, Bus Transceivers with Three-State Outputs, Monolithic Silicon
• DLA W-C-596/112 B-2012 CONNECTOR, RECEPTACLE, ELECTRICAL, SPECIAL PURPOSE, DUPLEX, GROUNDING, 2 POLE, 3 WIRE, 15 AMPERES, 277 VOLTS, 50/60 HERTZ
• DLA MIL-PRF-39016/43 E VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 1.0 Ampere, with Internal Diodes for Coil Transient Suppression, and Polarity Reversal Protection Terminals 0.100- Inch Grid Pattern (Sensitive, 60 Milliwatts, Coil Operate Power at 25
• DLA MIL-PRF-39016/16 G-2004 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1.0 AMPERE (SENSITIVE, 60 MILLIWATTS) WITH INTERNAL DIODE FOR COIL TRANSIENT SUPPRESSION
• DLA MIL-PRF-39016/16 G VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 1.0 Ampere (Sensitive, 60 Milliwatts) with Internal Diode for Coil Transient Suppression
• DLA SMD-5962-87595 REV B-2001 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, BUS TRANSCEIVER, MONOLITHIC SILICON
• DLA DSCC-VID-V62/03621 REV A-2009 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 36-BIT REGISTERED BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
• DLA DSCC-VID-V62/04671 REV A-2010 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-V ABT QUADRUPLE BUS BUFFER WITH 3-STATE OUTPUTS, MONOLITHIC SILICON
• DLA DSCC-VID-V62/04705 REV A-2011 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 3.3-V ABT QUADRUPLE BUS BUFFER WITH 3-STATE OUTPUTS, MONOLITHIC SILICON
• DLA MIL-M-38510/328 C VALID NOTICE 1-2008 Microcircuits, Digital, Bipolar, Low-Power Schottky TTL, Bus Transceivers with Three State Outputs, Monolithic Silicon
• DLA MIL-M-38510/328 C VALID NOTICE 2-2013 Microcircuits, Digital, Bipolar, Low-Power Schottky TTL, Bus Transceivers with Three State Outputs, Monolithic Silicon
• DLA SMD-5962-97625 REV B-2009 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 16-BIT BUS TRANSCEIVER WITH BUS HOLD AND THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
• DLA SMD-5962-87640 REV B-2002 MICROCIRCUIT, LINEAR, BIMOS II LATCHED DRIVERS, MONOLITHIC SILICON
• DLA SMD-5962-89466-1991 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCE SCHOTTKY TTL, OCTAL BUS TRANSCEIVER WITH THREE-STATE OUTPUT, MONOLITHIC SILICON
• DLA SMD-5962-89956 REV C-2009 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY TTL, OCTAL BUS TRANSCEIVERS AND REGISTERS, MONOLITHIC SILICON
• DLA SMD-5962-90750 REV B-2012 MICROCIRCUIT, DIGITAL, BIPOLAR CMOS, OCTAL BUS TRANSCEIVER WITH INVERTING THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON

Taiwan Provincial Standard of the People's Republic of China, bipolar curve

• CNS 11521-1986 Method for Making Anode Polarization Measurement for Stainless Steels
• CNS 9766-1982 Double Curve Pen for Drawing Instruments

CZ-CSN, bipolar curve

• CSN 30 4151-1966 Heater plugs double pole, threaded

Japanese Industrial Standards Committee (JISC), bipolar curve

• JIS G 0579:2007 Method of anodic polarization curves measurement for stainless steels
• JIS G 0579 AMD 1:2012 Method of anodic polarization curves measurement for stainless steels (Amendment 1)

Electronic Components, Assemblies and Materials Association, bipolar curve

• ECA TEP197-A-1997 Preparation of X-Radiation Characteristic Curves for Cathode Ray Tubes

HU-MSZT, bipolar curve

• MNOSZ 10439-1953

ECIA - Electronic Components Industry Association, bipolar curve

• TEP197-A-1997 Preparation of X-Radiation Characteristic Curves for Cathode Ray Tubes
• TEP197-1989 Preparation of X-Radiation Characteristic Curves for Cathode Ray Tubes Report of the JT-32 Committee

British Standards Institution (BSI), bipolar curve

• BS EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forminglimit curves - Part 2: Determination of forming-limit curves in the laboratory
• BS EN ISO 12004-2:2021 Metallic materials. Determination of forming-limit curves for sheet and strip. Determination of forming-limit curves in the laboratory
• 19/30393818 DC BS EN ISO 12004-2. Metallic materials. Sheet and strip. Determination of forming-limit curves. Part 2. Determination of forming-limit curves in the laboratory
• BS EN 3711:2008 Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset
• BS EN ISO 12004-1:2008 Metallic materials - Sheet and strip - Determination of forminglimit curves - Part 1: Measurement and application of forminglimit diagrams in the press shop
• BS EN 60838-2-3:2017 Miscellaneous lampholders. Particular requirements. Lampholders for double-capped linear LED lamps
• 19/30393815 DC BS EN ISO 12004-1. Metallic materials. Sheet and strip. Determination of forming-limit curves. Part 1. Measurement and application of forming-limit diagrams in the press shop

Professional Standard - Machinery, bipolar curve

• JB/T 10850-2008 Edge banding machine. Accepptance conditions
• JB/T 7704.6-1995 Test method for electroplating solution Determination of polarization curve

GM North America, bipolar curve

• GM 9986115-2003 Oil - Axle Lubricant, Fuel-Efficient Hypoid Revision A

PL-PKN, bipolar curve

• PN M66352-1968 Press tools Bilateral curve cutting off die
• PN-EN ISO 12004-2-2021-08 E Metallic materials -- Determination of forming-limit curves for sheet and strip -- Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
• PN-EN ISO 12004-1-2021-05 E Metallic materials -- Determination of forming-limit curves for sheet and strip -- Part 1: Measurement and application of forming-limit diagrams in the press shop (ISO 12004-1:2020)

Professional Standard - Electron, bipolar curve

• SJ/Z 1171-1977 Methods for determination of polarization curve of electroplating solution
• SJ 2354.7-1983 Method of measurement for spectral response curve and spectral response range of PIN and avalanche photodiodes

Group Standards of the People's Republic of China, bipolar curve

• T/CECS 1068-2022 Reliability Appraisal Standards for Hyperbolic Cooling Towers
• T/NSSQ 004-2022 Specification of voiceprint recognition based on hyperbolic space
• T/IAWBS 017-2022 Test method for full width at half maximum of double crystal X-rayrocking curve of diamond single crystal substrate
• T/IAWBS 015-2021 Test method for full width at half maximum of double crystal X-ray rocking curve of Ga2O3 single crystal substrate
• T/IAWBS 016-2022 X-ray double crystal rocking curve FWHM test method for silicon carbide single wafer

Danish Standards Foundation, bipolar curve

• DS/EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory
• DS/ISO 12004-2:2021 Metallic materials – Determination of forming-limit curves for sheet and strip – Part 2: Determination of forming-limit curves in the laboratory
• DS/EN ISO 12004-2:2021 Metallic materials – Determination of forming-limit curves for sheet and strip – Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
• DS/EN ISO 12004-1:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 1: Measurement and application of forming-limit diagrams in the press shop
• DS/ISO 12004-1:2020 Metallic materials – Determination of forming-limit curves for sheet and strip – Part 1: Measurement and application of forming-limit diagrams in the press shop
• DS/EN ISO 12004-1:2020 Metallic materials – Determination of forming-limit curves for sheet and strip – Part 1: Measurement and application of forming-limit diagrams in the press shop (ISO 12004-1:2020)
• DS/EN 50075/Ret.1:2006 Flat non-rewirable two-pole plugs, 2,5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes
• DS/EN 50075:2003 Flat non-rewirable two-pole plugs, 2,5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes

IT-UNI, bipolar curve

• UNI EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory
• UNI 4760-P3-1975
• UNI 6614-1969
• UNI EN ISO 12004-1:2020 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 1: Measurement and application of forming-limit diagrams in the press shop
• UNI 6615-1969
• UNI 6618-1969

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, bipolar curve

• GB/T 24171.2-2009 Metallic materials.Sheet and strip.Determination of forming limit curves.Part 2:Determinations of forming limit curves in laboratory
• GB 50573-2010 Code for construction and quality acceptance of hyperbolic cooling tower engineering
• GB/T 32188-2015 Test method for full width at half maximum of double crystal X-ray rocking curve of GaN single crystal substrate
• GB/T 38719-2020(英文版) Metallic materials Tube Determination of biaxial stress strain curve of tube by hydro bulging test
• GB/T 24171.1-2009 Metallic materials.Sheet and strip.Determination of forming limit curves.Part 1:Measurement and application of forming limit diagrams in press shop
• GB/T 42472-2023 Critical current measurement of retained critical current after double bending of silver-coated Bi-2223 superconducting wire at room temperature

ES-UNE, bipolar curve

• UNE-EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
• UNE-EN ISO 12004-1:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 1: Measurement and application of forming-limit diagrams in the press shop (ISO 12004-1:2020)
• UNE-EN ISO 16808:2023 Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO 16808:2022)

未注明发布机构, bipolar curve

• DIN EN ISO 12004-2:2021 Metallic materials – Determination of the forming limit curve for sheets and strips – Part 2: Determination of forming limit curves in the laboratory

European Committee for Standardization (CEN), bipolar curve

• EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
• EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008)
• EN 3711:2008 Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset
• EN ISO 12004-1:2020 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 1: Measurement and application of forming-limit diagrams in the press shop (ISO 12004-1:2020)
• EN ISO 12004-1:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 1: Measurement and application of forming-limit diagrams in the press shop (ISO 12004-1:2008)

International Organization for Standardization (ISO), bipolar curve

• ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory
• ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory
• ISO 4165:2001 Road vehicles - Electrical connections - Double-pole connection
• ISO 4165:1979 Road vehicles; Electrical connections; Double-pole connector
• ISO 12004-1:2020 Metallic materials — Determination of forming-limit curves for sheet and strip — Part 1: Measurement and application of forming-limit diagrams in the press shop
• ISO/TR 13989-2:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Part 2: Integral temperature method
• ISO/TR 13989-1:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Part 1: Flash temperature method
• ISO 16808:2022 Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems

Association Francaise de Normalisation, bipolar curve

• NF A03-670-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2 : determination of forming-limit curves in laboratory.
• NF EN IEC 60263:2020 Échelles et dimensions des graphiques pour le tracé des courbes de réponse en fréquence et des diagrammes polaires
• NF A03-670-1:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 1 : measurement and application of forming-limit diagrams in press shop.

German Institute for Standardization, bipolar curve

• DIN EN ISO 12004-2:2009 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008); English version of DIN EN ISO 12004-2:2009-02
• DIN EN 3711:2008 Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset; German and English version EN 3711:2008
• DIN EN ISO 12004-2:2021-07 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021); German version EN ISO 12004-2:2021
• DIN EN ISO 12004-2:2019 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO/DIS 12004-2:2019); German and English version prEN ISO 12004-2:2019
• DIN IEC 60263:1999 Sclaes and sizes for plotting frequency characteristics and polar diagrams (IEC 60263:1982)
• DIN VDE V 0750-2-2-1:2021 Medical electrical devices - Dimensions of the plug connection between patient line and bipolar accessories
• DIN EN ISO 12004-1:2021-02 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 1: Measurement and application of forming-limit diagrams in the press shop (ISO 12004-1:2020); German version EN ISO 12004-1:2020
• DIN 49464:2001 Circular non-rewireable two-pole plugs AC 2,5 A 250 V with obliques pins for class II appliances - Principal dimensions
• DIN EN ISO 12004-1:2009 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 1: Measurement and application of forming-limit diagrams in the press shop (ISO 12004-1:2008); English version of DIN EN ISO 12004-1:2009-02
• DIN 41704-2:1987 Electrical communications engineering; connectors with two rows of contacts, connection box and connector, 4- and 8poles; requirements, tests
• DIN 41704-1:1987 Electrical communications engineering; connectors with two rows of contacts, connection box and connector, 4- and 8poles; types, dimensions
• DIN EN ISO 16808:2022-08 Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO 16808:2022); German version EN ISO 16808:2022

American Society for Testing and Materials (ASTM), bipolar curve

• ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
• ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
• ASTM D1830-17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
• ASTM D1830-99(2012) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method

American Welding Society (AWS), bipolar curve

• WRC 148:1970 Interaction Curves for Sections Under Combined Biaxial Bending and Axial Force

Lithuanian Standards Office , bipolar curve

• LST EN ISO 12004-2:2009 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008)
• LST EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
• LST EN ISO 12004-1:2009 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 1: Measurement and application of forming-limit diagrams in the press shop (ISO 12004-1:2008)
• LST EN ISO 12004-1:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 1: Measurement and application of forming-limit diagrams in the press shop (ISO 12004-1:2020)
• LST EN 50075-2001 Flat non-wirable two-pole plugs, 2,5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes

AT-ON, bipolar curve

• OENORM EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
• OENORM EN ISO 12004-1:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 1: Measurement and application of forming-limit diagrams in the press shop (ISO 12004-1:2020)

AENOR, bipolar curve

• UNE-EN ISO 12004-2:2010 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008)
• UNE-EN ISO 12004-1:2009 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 1: Measurement and application of forming-limit diagrams in the press shop (ISO 12004-1:2008)
• UNE-EN 50075:1993 FLAT NON-WIRABLE TWO-POLE PLUGS, 2,5 A 250 V, WITH CORD, FOR THE CONNECTION OF CLASS II EQUIPMENT FOR HOUSEHOLD AND SIMILAR PURPOSES.

CU-NC, bipolar curve

• NC 66-29-1984 Electronics. Bipolar Transistors Measurement Methods
• NC 66-27-1984 Electronics High-Frequency Bipolar Transistors, Type BF 310 Quality Specifications
• NC 66-28-1984 Electronics. High-Frequency Bipolar Transistors. Type BF 199. Quality Specifications
• NC 66-26-1984 Electronics. High-Power, Bipolar Switching Transistor, Type BU 208. Quality Specifications
• NC 66-23-1984 Electronics. High-Power and Low-Frequency Bipolar Transistors, Type 2N 3055. Quality Specifications
• NC 66-16-1987 Electronic and Electrotechnical Industry Low Noise and Power Bipolar Transistors. Quality Specifications
• NC 66-18-1984 Electronics. Medium-Power and High-Voltage Bipolar Transistors Types BC 328 and BC 338. Quality Specifications
• NC 66-20-1984 Electronios. High-Power and Low-Frequency Bipolar Tranaistors, Types BD 175, BD 176, BD 177 and BD 178. Quaiity Specifications

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, bipolar curve

• GB/T 34612-2017 Measurement method for X-ray double crystal diffraction rocking curve of sapphire crystals

International Telecommunication Union (ITU), bipolar curve

• ITU-R M.631-1 FRENCH-1992 USE OF HYPERBOLIC MARITIME RADIONAVIGATION SYSTEMS IN THE BAND 283.5-315 kHz UTILISATION DE SYST萂ES DE RADIONAVIGATION MARITIME HYPERBOLIQUES DANS LA BANDE 283,5-315 kHz
• ITU-R M.631-1-1992 USE OF HYPERBOLIC MARITIME RADIONAVIGATION SYSTEMS IN THE BAND 283.5-315 kHz

American Gear Manufacturers Association, bipolar curve

• AGMA 09FTM05-2009 Hypoloid Gears with Small Shaft Angles and Zero to Large Offsets
• AGMA 2000FTM8-2000 Stock Distribution Optimization in Fixed Setting Hypoid Pinions

Institute of Electrical and Electronics Engineers (IEEE), bipolar curve

• IEEE Std 620-1996 IEEE Guide for the presentation of thermal limit curves for squirrel cage induction machines
• IEEE 620-2022 IEEE Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
• IEEE Std 620-2022 IEEE Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines - Redline
• IEEE P620/D6, November 2021 IEEE Draft Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
• IEEE P620/D2, April 2020 IEEE Draft Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
• IEEE P620/D5, October 2021 IEEE Draft Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
• IEEE P620/D3, August 2021 IEEE Draft Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
• IEEE P620/D4, September 2021 IEEE Draft Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
• IEEE Std 620-1987 IEEE Guide for Construction and Interpretation of Thermal Limit Curves for Squirrel-Cage Motors Over 500 hp
• IEEE 620-1987 IEEE Guide for Construction and Interpretation of Thermal Limit Curves for Squirrel-Cage Motors Over 500 hp
• ANSI/IEEE Std 620-1981 IEEE Trial Use Guide for Construction and Interpretation of Thermal Limit Curves for Squirrel-Cage Motors Over 500 hp

International Electrotechnical Commission (IEC), bipolar curve

• IEC PAS 62123:1999 Performance guide - Manual for single- and double-sided flexible printed wiring boards

Professional Standard - Chemical Industry, bipolar curve

• HG/T 4543-2013 Water treatment chemicals.Determination of corrosion inhibition performance.Potentiodynamic polarization method

ESDU - Engineering Sciences Data Unit, bipolar curve

• ESDU 91009 B-2014 Effect of twin fins on isolated tailplane lift-curve slope
• ESDU 91009 A-1993 Effect of twin fins on isolated tailplane lift-curve slope.

National Association of Corrosion Engineers (NACE), bipolar curve

• NACE RP0197-1997 Standard Format for Computerized Electrochemical Polarization Curve Data Files
• NACE RP0197-2004 Standard Format for Computerized Electrochemical Polarization Curve Data Files Item No. 21080

CH-SNV, bipolar curve

• VSM 34675-1968

Guangdong Provincial Standard of the People's Republic of China, bipolar curve

• DB44/T 840.2-2010 Determination of Corrosion Inhibition Rate of Industrial Boiler Corrosion Inhibitor Part 1: Polarization Curve Method

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, bipolar curve

• REPORT M.2175-2010 Simultaneous dual linear polarization transmission technique using digital cross-polarization cancellation for MSS systems
• ITU-R M.631-1986 Use of Hyperbolic Maritime Radionavigation Systems in the Band 283.5-315 kHz - Section 8D - Radiodetermination@ Global Maritime Distress and Safety System and Related Subjects

Society of Automotive Engineers (SAE), bipolar curve

• SAE AS81714/24-2012 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, ELECTRONIC, IN-LINE JUNCTIONS, DOUBLE, INTEGRAL DIODE(S), SERIES I
• SAE AS81714/24B-2021 TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL ELECTRONIC IN-LINE JUNCTIONS, DOUBLE, INTEGRAL DIODE(S), SERIES I

SAE - SAE International, bipolar curve

• SAE AS81714/24A-2018 TERMINAL JUNCTION SYSTEM@ TERMINAL JUNCTION BLOCKS@ SECTIONAL@ ELECTRONIC@ IN-LINE JUNCTIONS@ DOUBLE@ INTEGRAL DIODE(S)@ SERIES I
• SAE AS81714/24-2001 TERMINAL JUNCTION SYSTEM@ TERMINAL JUNCTION BLOCKS@ SECTIONAL@ ELECTRONIC@ IN-LINE JUNCTIONS@ DOUBLE@ INTEGRAL DIODE(S)@ SERIES I

RU-GOST R, bipolar curve

• GOST 26169-1984 Radioelectronic equipment electromagnetic compatibility. High-power bipolar high-frequency linear transistors intermodulation component coefficient standards

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., bipolar curve

• IEEE 620-1981 Trial-Use Guide for Construction and Interpretation of Thermal Limit Curves for Squirrel-Cage Motors Over 500 HP

国家市场监督管理总局、中国国家标准化管理委员会, bipolar curve

• GB/T 38719-2020 Metallic materials—Tube—Determination of biaxial stress-strain curve of tube by hydro-bulging test
• GB/T 38684-2020 Metallic materials—Sheet and strip—Biaxial stress-strain curve by means of bulge test—Optical measuring systems

Military Standard of the People's Republic of China-General Armament Department, bipolar curve

• GJB 38.30-1987 Receiver for long-range hyperbolic radio navigation system in conventional power submarine mooring and navigation test regulations
• GJB 350.64-1987 Surface combat ship mooring and sailing test procedures Hyperbolic transit time locator test

Liaoning Provincial Standard of the People's Republic of China, bipolar curve

• DB21/T 2662.6-2016 Boiler Operation Specification Part 6: Determination of Corrosion Inhibition Rate of Industrial Boiler Corrosion Inhibitor Polarization Curve Method

European Committee for Electrotechnical Standardization（CENELEC）, bipolar curve

• EN 50075:1990 Flat Non-Wirable Two-Pole Plugs, 2,5 A 250 V, with Cord, for the Connection of Class II-Equipment for Household and Similar Purposes

Others:   bipolar curve, double standard curve method, flexible bipolar tube, Bipolar Ion Definition, Bipolar Ion Definition, bipolar ion interaction, bipolar ion interaction, Bipolar membrane wastewater, double mass curve, double standard curve, double quadrupole, Bipolar reverse osmosis equipment, bipolar detection chip, bipolar detection chip, bipolar disorder, Bipolar pole test voltage, bipolar magnetic semiconductor, bipolar reverse osmosis, bipolar personality, bipolar reverse osmosis.