ZH
RU
ES

The method used by the gluten meter

The method used by the gluten meter, Total:500 items.

In the international standard classification, The method used by the gluten meter involves: Cereals, pulses and derived products, Road engineering, Linear and angular measurements, Metalliferous minerals, Soil quality. Pedology, Construction industry, Radiation measurements, Photography, Surface treatment and coating, Rubber, Paints and varnishes, Semiconductor devices, Measurement of volume, mass, density, viscosity, Mechanical testing, Analytical chemistry, Fuels, Products of the textile industry, Fluid storage devices, Protection against fire, Road vehicles in general, Farming and forestry, Protective equipment, Medical equipment, Lubricants, industrial oils and related products, Structures of buildings, Footwear, Inks. Printing inks, Glass, Corrosion of metals, Milk and milk products, Inorganic chemicals, Thermodynamics and temperature measurements, Measurement of fluid flow, Particle size analysis. Sieving, Electronic tubes, Tobacco, tobacco products and related equipment, Construction materials, Acoustics and acoustic measurements, Air quality, Earthworks. Excavations. Foundation construction. Underground works, Agricultural machines, implements and equipment, Paper and board, Textile fibres, Products of the chemical industry, Optics and optical measurements, Waxes, bituminous materials and other petroleum products, Railway rolling stock, Protection of and in buildings, Fibre optic communications, Geology. Meteorology. Hydrology, Ceramics, Plastics, Vocabularies, Magnetic materials, Sports equipment and facilities, Reinforced plastics, Elements of buildings, Petroleum products in general, Shipbuilding and marine structures in general, Document imaging applications, Electrical equipment for working in special conditions, Raw materials for rubber and plastics, Powder metallurgy, Rubber and plastics products, Non-destructive testing, Tyres, Nuclear energy engineering, Radiocommunications.

Association Francaise de Normalisation, The method used by the gluten meter

NF V03-730-2*NF EN ISO 21415-2:2015 Wheat and wheat flour - Gluten content - Part 2 : determination of wet gluten and gluten index by mechanical means
NF V03-730-2:2008 Wheat and wheat flour - Gluten content - Part 2 : determination of wet gluten by mechanical means.
NF EN ISO 7973:2016 Céréales et produits de mouture des céréales - Détermination de la viscosité de la farine - Méthode utilisant un amylographe
NF T35-503-4*NF EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4 : method for the calibration of ISO surface profile comparators and for the determination of s
NF T35-503-4:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 4 : method for the calibration of ISO surface profile comparators and for the determination of sur
NF B35-309:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use.
NF EN ISO 24265:2020 Chaussures - Méthodes d'essai pour les tiges - Résistance au frottement à l'aide d'une bande en caoutchouc
NF X11-622:1977 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. Various readings of the basic method.
NF ISO 2591-1:1989 Tamisage de contrôle - Modes opératoires utilisant des tamis de contrôle en tissus métalliques et en tôles métalliques perforées
NF V03-731:2006 Wheat flour - Method for the measurement of damage of starch by means of SDmatic.
NF X65-011-2*NF ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2 : primary calibration methods
FD ISO/TR 22335:2008 Analyse chimique des surfaces - Profilage en profondeur - Mesurage de la vitesse de pulvérisation : méthode par empreinte de grille au moyen d'un profilomètre à stylet mécanique
NF T35-503-3*NF EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3 : method for the calibration of ISO surface profile comparators and for the determination of s
NF T35-503-3:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 3 : method for the calibration of ISO surface profile comparators and for the determination of sur
NF EN 62276:2018 Tranches monocristallines pour applications utilisant des dispositifs à ondes acoustiques de surface (OAS) - Spécifications et méthodes de mesure
FD X21-063*FD ISO/TR 22335:2008 Surface chemical analysis - Depth profiling - Measurement of sputtering rate : mesh-replica method using a mechanical stylus profilometer
NF EN 14630:2007 Produits et systèmes pour la protection et la réparation des structures en béton - Méthodes d'essais - Mesurage de la profondeur de carbonatation d'un béton armé par la méthode phénolphtaléine
NF C96-022-40*NF EN 60749-40:2012 Semiconductor devices - Mechanical and climatic test methods - Part 40 : board level drop test method using a strain gauge
NF EN 60749-40:2012 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 40 : méthode d'essai de chute au niveau de la carte avec utilisation d'une jauge de contrainte
NF ISO 2971:2013 Cigarettes et bâtonnets-filtres - Détermination du diamètre nominal - Méthode utilisant un instrument de mesure optique sans contact
NF ISO 24578:2021 Hydrométrie - Profileurs acoustiques à effet Doppler - Méthode et application pour le mesurage de l'écoulement à surface libre sur un bateau mobile
NF EN ISO 4787:2021 Verrerie et matériel en plastique de laboratoire - Instruments volumétriques - Méthodes d'essai de la capacité et d'utilisation
NF X10-971*NF ISO 24578:2021 Hydrometry - Acoustic Doppler profiler - Method and application for measurement of flow in open channels from a moving boat
NF EN 15168:2007 Agents de surface - Détermination de l'indice d'hydroxyle - Méthode à la p-toluènesulfonylisocyanate (TSI) et dosage potentiomètrique avec l'hydroxyde de tétrabutylammonium
NF EN 61290-10-1:2009 Amplificateurs optiques - Méthodes d'essai - Partie 10-1 : paramètres à canaux multiples - Méthode d'impulsion utilisant un interrupteur optique et un analyseur de spectre optique
NF EN ISO 6145-1:2019 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 1 : aspects généraux
NF EN ISO 18593:2018 Microbiologie des aliments - Méthodes horizontales pour les techniques de prélèvement sur des surfaces, au moyen de boîtes de contact et d'écouvillons
NF EN 62490-2:2011 Méthode de mesure de l'ESL - Partie 2 : condensateurs pour montage en surface utilisés dans les équipements électroniques
NF EN 61290-10-2:2008 Amplificateurs optiques - Méthodes d'essai - Partie 10-2 : paramètres à canaux multiples - Méthode d'impulsion utilisant un analyseur de spectre optique stroboscopique
NF EN 16424:2014 Caractérisation des déchets - Méthode de dépistage pour la détermination de la composition élémentaire au moyen d'analyseurs portables de fluorescence X
XP P98-831-2*XP CEN/TS 13036-2:2012 Road and airfield surface characteristics - Test methods - Part 2 : assessment of the skid resistance of a road pavement surface by the use of dynamic measuring systems
NF EN 61290-10-4:2007 Amplificateurs optiques - Méthodes d'essai - Partie 10-4 : paramètres à canaux multiples - Méthode par soustraction de source interpolée en utilisant un analyseur de spectre optique

RO-ASRO, The method used by the gluten meter

STAS 5730/4-1987 Surfaces condition RULES FOR THE MEASURE- MENT OF SURFACE ROUGHNESS USING STYLUS INSTRUMENTS

Indonesia Standards, The method used by the gluten meter

SNI 4427-2008 Testing methods of hardness surface frictional properties using British Pendulum Tester (BPT)
SNI 7881-2013

European Committee for Standardization (CEN), The method used by the gluten meter

EN ISO 21415-2:2015 Wheat and wheat flour - Gluten content Part 2: Determination of wet gluten and gluten index by mechanical means
EN ISO 8503-4:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast -Cleaned Steel Substrates - Part 4: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of
EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021)
EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15)
EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
EN ISO 8503-3:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 3: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of S
EN ISO 8503-2:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 2: Method for the Grading of Surface Profile of Abrasive Blast-Cleaned Steel - Comparator Proce
EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced

American Society for Testing and Materials (ASTM), The method used by the gluten meter

ASTM E408-13(2019) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM D6951/D6951M-09(2015) Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D6951-03 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D6951/D6951M-09 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D6230-98(2005) Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM E303-93(2018) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM E2244-05 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2244-11 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2244-11(2018) Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E303-93(1998) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM E2133-03(2020) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
ASTM E1696-15(2022) Standard Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer
ASTM D713-90(2004) Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
ASTM F78-97(2002) Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
ASTM E950-98(2004) Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
ASTM E950-98 Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
ASTM F1702-10 Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus
ASTM D2885-95(1999) Standard Test Method for Research and Motor Method Octane Ratings Using On-Line Analyzers
ASTM D2885-21 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D6587-12 Standard Test Method for Yarn Number Using Automatic Tester
ASTM D6587-12(2018) Standard Test Method for Yarn Number Using Automatic Tester
ASTM D2885-08 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D2885-09 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D7127-13 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASTM E950/E950M-09 Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
ASTM D713-90(2010) Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
ASTM D713-12 Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
ASTM D6575/D6575M-16 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
ASTM E1274-03 Standard Test Method for Measuring Pavement Roughness Using a Profilograph
ASTM E1274-88(1993)e1 Standard Test Method for Measuring Pavement Roughness Using a Profilograph
ASTM E1274-03(2008) Standard Test Method for Measuring Pavement Roughness Using a Profilograph
ASTM E1274-03(2012) Standard Test Method for Measuring Pavement Roughness Using a Profilograph
ASTM E1274-18 Standard Test Method for Measuring Pavement Roughness Using a Profilograph
ASTM E670-09(2020) Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
ASTM F2961-14 Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
ASTM D971-12 Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method
ASTM A944-10(2015) Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM E1710-05 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM F1702-10(2018) Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus
ASTM E1710-11 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM D5099-93(2003) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D5099-93(1998) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM F1678-96 Standard Test Method for Using a Portable Articulated Strut Slip Tester (PAST)
ASTM F1702-96 Standard Test Method for Measuring Shock-Attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus
ASTM F1702-96(2002)e1 Standard Test Method for Measuring Shock-Attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus
ASTM D5725-99(2003) Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester
ASTM D5725-99 Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester
ASTM D5725-99(2008) Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester
ASTM E408-71(1996)e1 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E408-71(2002) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM D6230-98 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM D5767-95(1999) Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
ASTM D6230-13 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM D5767-95(2012) Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
ASTM G73-10 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
ASTM D6556-14 Standard Test Method for Carbon Blackmdash;Total and External Surface Area by Nitrogen Adsorption
ASTM E2684-17 Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
ASTM E2583-07(2015) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
ASTM D3464-96(2014) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D5099-08 Standard Test Methods for Rubberx2014;Measurement of Processing Properties Using Capillary Rheometry
ASTM E1703/E1703M-95(2005) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
ASTM E1703/E1703M-10 Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
ASTM E1703/E1703M-95(2000) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
ASTM E1703/E1703M-10(2015) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
ASTM D6928-08 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D4541-09 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D7271-06(2020) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM E408-71(2008) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E408-13 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM D8184-18 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D8184-18e1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7404-07 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D7404-07(2012) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM E2058-13a Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM D7404-07(2016) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D5099-08(2017) Standard Test Methods for Rubber&x2014;Measurement of Processing Properties Using Capillary Rheometry
ASTM D5485-16 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
ASTM D5195-14 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
ASTM E2380/E2380M-15(2019) Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM D5093-90(1997) Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
ASTM D5093-15e1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM D5093-15 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM E2244-02 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E162-15a Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E274-79 Standard Test Method for Skid Resistance Of Paved Surfaces Using A Full-Scale Tire
ASTM E274-06 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
ASTM E1084-86(2023) Standard Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight
ASTM E274/E274M-15(2020) Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
ASTM E810-20 Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
ASTM E2246-11(2018) Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2245-11(2018) Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E162-94 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-90e1 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-98 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-02 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-16 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM D528-97(2007) Standard Test Method for Machine Direction of Paper and Paperboard
ASTM D5289-95(2001) Standard Test Method for Rubber Property8212;Vulcanization Using Rotorless Cure Meters
ASTM D7428-08e1 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D5289-19 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D5289-95 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM F1930-18 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM D5289-19a Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E3367-23 Standard Test Method for Determining the Combustion Behavior of Layered Assemblies using a Cone Calorimeter
ASTM D6087-07 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
ASTM D6087-08(2015)e1 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
ASTM D6951/D6951M-18 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D6951/D6951M-18(2023) Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM E965-15(2019) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM D6432-19 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
ASTM D5454-93(1999) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-04 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM F1930-17 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM D5454-11(2020) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM F1930-13 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM D4060-10 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D8004-23 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
ASTM E2244-11e1 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM D5130-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM C1069-86(1997)e1 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM D7127-17 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASTM D5767-18 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
ASTM D5142-02a Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02ae1 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D3999-91(1996) Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
ASTM F1677-96 Standard Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)
ASTM D5277-92(2002) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D1052-09(2019) Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D5142-90(1998) Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM E1458-92 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM D7271-06 Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM F1551-94 Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials
ASTM D5767-17 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
ASTM D5142-04 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-09 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D7984-21 Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument
ASTM D8067/D8067M-17 Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture
ASTM C627-18 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
ASTM D664-09 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D4944-11 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
ASTM D664-11ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D6648-08 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM C627-10e1 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
ASTM D4541-22 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D664-18e2 Test Method for Determination of Flexible Creep Hardness of Asphalt Binders Using a Bending Beam Rheometer
ASTM D2396-20 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D7175-05 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-07 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-05e1 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM C1784-20 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
ASTM D4230-02e1 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D4748-06 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
ASTM D4748-10 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
ASTM D4748-98 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
ASTM D4230-02(2007) Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D4748-10(2015) Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
ASTM D4230-02(2012) Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D4748-10(2020) Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
ASTM D5001-10(2014) Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM D585-97(2007) Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
ASTM D5859-96e1 Standard Test Method for Determining the Traction of Footwear on Painted Surfaces Using the Variable Incidence Tester
ASTM D4754-18 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
ASTM D7941/D7941M-23 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM D6204-12 Standard Test Method for Rubbermdash;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM F1930-23 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM E2307-19 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E2307-20 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E2307-15be1 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM D7027-20 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM D5084-16a Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM B855-17 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
ASTM D5084-16 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM D5084-10 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM D8004-15 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
ASTM D7686-11 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
ASTM D3675-16 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM D7990-21 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding
ASTM C1789-13 Standard Test Method for Use and Calibration of Hand-Held Moisture Meters on Gypsum Panels
ASTM E493-06 Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM D7984-16 Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument
ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D3675-21 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM D3675-19 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM D3675-21a Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM D3675-17 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM C627-93(1999) Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
ASTM D6277-01 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6277-99 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6277-01(2006) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D7454-08 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM E2058-13 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM D5454-11 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-11e1 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM E2540-16(2022) Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
ASTM E1709-16(2022) Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
ASTM D8446-22 Standard Test Method for Water Vapor Content in Compressed Air Using Electronic Moisture Analyzers
ASTM D7271-06(2012) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM D7760-12 Standard Test Method for Measurement of Hydraulic Conductivity of Tire Derived Aggregates Using a Rigid Wall Permeameter
ASTM C1344-97(2013) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
ASTM D6277-07(2017) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D7941/D7941M-14 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM D7454-14e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D6648-01 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM E503/E503M-88(2000) Standard Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger Vehicle Diagonal Braking Technique
ASTM E503/E503M-88(2004) Standard Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger Vehicle Diagonal Braking Technique
ASTM E2551-07 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2551-13 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM D7238-06(2017) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM D7238-20 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM D7686-23 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
ASTM D6132-13(2022) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7682-10 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
ASTM E3013/E3013M-17 Standard Test Method for Evaluating Concrete Pavement Dowel Bar Alignment Using Magnetic Pulse Induction
ASTM D7682-17 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
ASTM E1477-98A(2017)e1 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
ASTM D4989-90a(1999)e1 Standard Test Method for the Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
ASTM D4989/D4989M-90a(2021) Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
ASTM E1477-98a(2017) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
ASTM D3675-14 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM E1354-09 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

British Standards Institution (BSI), The method used by the gluten meter

BS ISO 21283:2018 Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS 4317-22:1989 Methods of test for cereals and pulses. Determination of water absorption of flour and rheological properties of doughs using a valorigraph
BS EN ISO 7973:2015 Cereals and milled cereal products. Determination of the viscosity of flour. Method using an amylograph
BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
BS 7334-1:1990 Measuring instruments for building construction. Methods for determining accuracy in use: theory
BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
BS ISO 14934-2:2013 Fire tests. Calibration and use of heat flux meters. Primary calibration methods
BS EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof
BS ISO 9337-1:1999 Contact lenses. Determination of back vertex power. Method using focimeter with manual focusing
BS 7334-2:1990 Measuring instruments for building construction - Methods for determining accuracy in use: measuring tapes
BS 6538-2:1992 Air permeance of paper and board - Method for determination of air permeance using the Bendtsen apparatus
BS EN 61290-10-4:2007 Optical amplifiers - Test methods - Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
PD ISO/TR 22335:2007 Surface chemical analysis. Depth profiling. Measurement of sputtering rate. Mesh-replica method using a mechanical stylus profilometer
BS ISO 23048:2018 Ships and marine technology. Verification method for portable power measurement using a strain gauge
BS 4317-20:1999 Methods of test for cereals and pulses - Determination of water absorption of flour and rheological properties of doughs using a farinograph
BS 4317-21:1999 Methods of test for cereals and pulses - Determination of rheological properties of doughs using an extensograph
BS 7941-2:2000 Methods for measuring the skid resistance of pavement surfaces - Test method for measurement of surface skid resistance using the GripTester braked wheel fixed slip device
BS EN ISO 8504-1:2000 Preparation of steel substrates before application of paints and related products. Surface preparation methods. General principles
BS ISO 2971:2013 Cigarettes and filter rods. Determination of nominal diameter. Method using a non-contact optical measuring apparatus
BS 4359-4:1995 Determination of the specific surface area of powders - Recommendations for methods of determination of metal surface area using gas adsorption techniques
BS EN ISO 8504-1:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - General principles
19/30399973 DC BS EN ISO 24265. Footwear. Test methods for uppers. Fastness to rubbing using a rubber pad
BS EN 61290-10-1:2003 Optical amplifiers - Test methods - Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
BS EN 15042-2:2006 Thickness measurement of coatings and characterization of surfaces with surface waves - Guide to the thickness measurement of coatings by photothermic method
BS EN 60835-1-2:1993 Methods of measurement for equipment used in digital microwave radio transmission systems - Measurements common to terrestrial radio-relay systems and satellite earth stations - Basic characteristics
19/30345298 DC BS ISO 18527-3. Eye and face protection for sports use. Part 3. Requirements and test methods for eyewear intended to be used for surface swimming

The American Road & Transportation Builders Association, The method used by the gluten meter

AASHTO T 278-1990(R2007) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
AASHTO T 340-2010 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
AASHTO T 250-2005 Standard Method of Test for Thermoplastic Traffic Line Material
AASHTO T 346-2013 Standard Method of Test for Glass Beads Used in Pavement Markings
AASHTO TP 97-2011 Standard Method of Test for Glass Beads Used in Pavement Markings
AASHTO TP 76-2011 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
AASHTO TP 76-2012 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
AASHTO TP 76-2015 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
AASHTO T 360-2016 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
AASHTO TP 76-2013 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
AASHTO T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
AASHTO T 242-1996 Standard Method of Test for Frictional Properties of Paved Surfaces Using a Full-Scale Tire
AASHTO T 346-2012 Standard Method of Test for Glass Beads Used in Pavement Markings [Superseded: AASHTO TP 97]
AASHTO T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2015 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO TP 98-2012 Standard Method of Test for Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By (SIP) Method
AASHTO TP 98-2013 Standard Method of Test for Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By (SIP) Method
AASHTO TP 76-2010 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method Revision 1
AASHTO TP 63-2007 Standard Method of Test for Determining Rutting Susceptibility of Hot-Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
AASHTO TP58-1999 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus 2000 Edition
AASHTO T 159-1988 Standard Method of Test for Comparing Concrete on the Basis of the Bond Developed with Reinforcing Steel HM-22; Part IIA; ASTM Designation: C 234-87; (Discontinued) R(2000)
AASHTO T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO PP 67-2010 Standard Practice for Quantifying Cracks in Asphalt Pavement Surfaces from Collected images Utilizing Automated Methods Revision 1

AASHTO - American Association of State Highway and Transportation Officials, The method used by the gluten meter

T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
TP 63-2009 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
T 340-2010 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
TP 63-2007 Standard Method of Test for Determining Rutting Susceptibility of Hot-Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
TP 63-2003 Standard Method of Test for Determining Rutting Susceptibility of Asphalt Paving Mixtures Using the Asphalt Pavement Analyzer (APA)
T 346-2013 Standard Method of Test for Glass Beads Used in Pavement Markings
TP 97-2011 Standard Method of Test for Glass Beads Used in Pavement Markings
T 346-2012 Standard Method of Test for Glass Beads Used in Pavement Markings
TP48-1994 Standard Test Method for Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus (Edition 1A)
TP 76-2012 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
TP 76-2013 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
TP 76-2011 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
T 360-2016 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
TP 76-2009 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
TP 76-2008 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
TP 76-2015 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method
TP 76-2010 Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method (Revision 1)
T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 375M/T 375-2017 Standard Method of Test for Identification of Iron-Based Alloy Steel Bars for Concrete Reinforcement or Dowels by Handheld X-Ray Fluorescence (XRF) Spectrometer
TP 98-2013 Standard Method of Test for Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By (SIP) Method
TP 98-2012 Standard Method of Test for Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By (SIP) Method
TP 98-2018 Standard Method of Test for Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By (SIP) Method
T 242-1996 Standard Method of Test for Frictional Properties of Paved Surfaces Using a Full-Scale Tire
T242-1992 Standard Method of Test for Frictional Properties of Paved Surfaces Using a Full-Scale Tire (ASTM E274-85)
T 242-2018 Standard Method of Test for Frictional Properties of Paved Surfaces Using a Full-Scale Tire
TP5-1998 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2004 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1997 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2012 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2005 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 98-2011 Standard Method of Test for Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By Method (SIP)

International Electrotechnical Commission (IEC), The method used by the gluten meter

IEC 60181:1964 Index of electrical measuring apparatus used in connection with ionizing radiation
IEC 60181/AMD1:1967 Index of electrical measuring apparatus used in connection with ionizing radiation

International Organization for Standardization (ISO), The method used by the gluten meter

ISO 21283:2018 Iron ores - Determination of specific surface area - Test method using air-permeability apparatus (Blaine)
ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
ISO/TR 22335:2007 Surface chemical analysis - Depth profiling - Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer
ISO 2971:1998 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus
ISO/PAS 11819-4:2013 Acoustics - Method for measuring the influence of road surfaces on traffic noise - Part 4: SPB method using backing board
ISO 14648-2:2001 Micrographics - Quality control of COM recorders that generate images using a single internal display system - Part 2: Method of use
ISO 2971:2013 Cigarettes and filter rods - Determination of nominal diameter - Method using a non-contact optical measuring apparatus
ISO/TR 24578:2012 Hydrometry - Acoustic Doppler profiler - Method and application for measurement of flow in open channels

IN-BIS, The method used by the gluten meter

IS 13863-1993 Cereals and milled cereal products. Determination of the viscosity of flour. Method using an amylograph
IS 11276-1985
IS 12516 Pt.2-1988
IS 12516 Pt.1-1988
IS 10275-1982
IS 9690-1980

German Institute for Standardization, The method used by the gluten meter

DIN EN ISO 7973:2016-03 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992); German version EN ISO 7973:2015
DIN EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
DIN EN ISO 7973:2016 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992)
DIN EN ISO 24265:2021-02 Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020); German version EN ISO 24265:2020
DIN ISO 2971:2004 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus (ISO 2971:1998)
DIN EN ISO 3746:2011-03 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010); German version EN ISO 3746:2010
DIN EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
DIN IEC 61336:1999 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
DIN EN 61290-10-2:2008-07 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008 / Note: DIN EN 61290-10-2 (2004-02) remains valid alongside this stan...
DIN EN 60749-40:2012-02 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (IEC 60749-40:2011); German version EN 60749-40:2011
DIN EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
DIN EN 61290-10-1:2010-01 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2009); German version EN 61290-10-1:2009 / Note: DIN EN 61290-10-1 (2004-02) remains valid along...
DIN EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008
DIN EN 61290-10-4:2008-02 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007); German version EN 61290-10-4:2007 / Note: Applies in conjunction with DIN EN 61291...
DIN EN 14086:2003-04 Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method; German version EN 14086:2003

ES-UNE, The method used by the gluten meter

UNE-EN ISO 7973:2016 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992)
UNE-EN ISO 24265:2021 Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020)
UNE-EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (Endorsed by AENOR in May of 2008.)
UNE-EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (Endorsed by AENOR in November of 2011.)
UNE-EN 61290-10-1:2009 Optical amplifiers - Test methods -- Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (Endorsed by AENOR in July of 2009.)

Korean Agency for Technology and Standards (KATS), The method used by the gluten meter

KS M ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface profile comparators and for the determination of surface
KS M 6695-2016(2021) Testing method of crack growth using Demattia flex-cracking apparatus
KS M 6695-1984 Testing method of crack growth using Demattia flex-cracking apparatus
KS M 6695-2016 Testing method of crack growth using Demattia flex-cracking apparatus
KS L ISO 4787:2006 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
KS L ISO 4787:2016 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS F 2373-2010 Standard test method for measuring pavement roughness using a 7.6 m profilograph
KS F 2373-2010(2020) Standard test method for measuring pavement roughness using a 7.6 m profilograph
KS F 2373-2000 Standard test method for measuring pavement roughness using a 7.6 m profilograph
KS M ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 3：Method for the calibration of ISO surface profile comparators and for the determination of surface
KS H ISO 2971:2008 Cigarettes and filter rods-Determination of nominal diameter-Method using a laser beam measuring apparatus
KS H ISO 2971:2013 Cigarettes and filter rods -- Determination of nominal diameter -- Method using a laser beam measuring apparatus
KS H ISO 2971-2013(2018) Cigarettes and filter rods -- Determination of nominal diameter -- Method using a laser beam measuring apparatus
KS I ISO 3746:2016 Acoustics－Determination of sound power levels of noise sources using sound pressure－Survey method using an enveloping measurement surface over a reflecting plane
KS I ISO 3746:2022 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure —Survey method using an enveloping measurement surface over a reflecting plane
KS F 2393-2019 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS F 2393-2014 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS F 2390-2014 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS F 2390-2019 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS M ISO 2267:2007 Surface active agents - Evaluation of certain effects of laundering - Methods of preparation and use of unsoiled cotton control cloth
KS M ISO 8503-4-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface p
KS M ISO 8503-4:2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surf
KS M ISO 2267-2007(2022) Surface active agents - Evaluation of certain effects of laundering - Methods of preparation and use of unsoiled cotton control cloth

Lithuanian Standards Office , The method used by the gluten meter

LST ISO 7973:2006 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (idt ISO 7973:1992)
LST EN 14278-1-2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device
LST EN ISO 24265:2021 Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020)
LST EN ISO 3746:2011 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)

未注明发布机构, The method used by the gluten meter

DIN EN ISO 8503-4:1995 Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the DIN determination of surface profile using a stylus instrument
BS 7334-2:1990(1999) Measuring instruments for building construction — Part 2 : Methods for determining accuracy in use : Measuring tapes Copyright
DIN EN ISO 8503-3:1995 Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the DIN determination of surface profile using a focusing microscope

ES-AENOR, The method used by the gluten meter

UNE 115-215-1991 Earth moving machinery. Operation and maintenance. Training of mechanics

CH-SNV, The method used by the gluten meter

SNV 24526-1944
SN EN ISO 24265:2021 Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020)

VN-TCVN, The method used by the gluten meter

TCVN 1044-2007 Laboratory glassware.Volumetric glassware.Methods for use and testing of capacity
TCVN 5077-2008 Cigarettes and filter rods.Determination of nominal diameter.Method using a laser beam measuring apparatus

SE-SIS, The method used by the gluten meter

SIS SS-ISO 8503-4:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast- cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The method used by the gluten meter

GB/T 12810-1991 Laboratory glassware--Volumetric galssware--Methods for use and testing of capacity

国家市场监督管理总局、中国国家标准化管理委员会, The method used by the gluten meter

GB/T 12810-2021 Laboratory glassware—Capacity methods testing and use of volumetric instruments

TR-TSE, The method used by the gluten meter

TS 2950-1978 Measurement Of Water Flow In Closed Conduits - Tracer Methods Part III: Constant Rate Injection Method Using Radioactive Tracers

IT-UNI, The method used by the gluten meter

RU-GOST R, The method used by the gluten meter

GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer
GOST 21107.12-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for spark discharges
GOST 31634-2012 Cigarettes and filter rods. Determination of nominal diameter. Method using a laser beam measuring apparatus
GOST 21107.11-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge indicators
PNST 190-2017 Freight cars. Method of dynamic tests for impact on track with the use of strain-gauge-based wheelset
GOST 21107.13-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for pulsed thyratrons and gas-filled rectifiers
GOST 21107.10-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge thyratrons and gas-filled rectifiers
GOST R IEC 61241-2-1-1999 Electrical apparatus for use in the presence of combustible dust. Part 2. Test methods. Section 1. Methods for determining the minimum ignition temperatures of dust
GOST R IEC 61241-2-2-1999 Electrical apparatus for use in the presence of combustible dust. Part 2. Test methods. Section 2. Method for determining the electrical resistivity of dust in layers

TH-TISI, The method used by the gluten meter

TIS 1294-1995 Standard test method for flash point of cutback asphalt with tag open-cup
TIS 15.6-1978 Portland cement.part 6: standard method of test for fineness of portland cement by air permeability apparatus

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., The method used by the gluten meter

ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 4089-1997 Baselining Methodology for Facility-Level Monthly Energy Use - Part 1: Theoretical Aspects
ASHRAE CH-99-1-3-1999 Predicting the Position of the Smoke Layer Interface Height Using NFPA 92B Calculation Methods and a CFD Fire Model

US-FCR, The method used by the gluten meter

FCR COE CRD-C 53-01-2001 TEST METHOD FOR CONSISTENCY OF NO-SLUMP CONCRETE USING THE MODIFIED VEBE APPARATUS

BE-NBN, The method used by the gluten meter

NBN-ISO 8322-8:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 8 : Electronic distance-measuring instruments up to 150 m
NBN T 63-301-1987 Surface active agents - Evaluation of certain effects of laundering - Methods of preparation and use of unsoiled cotton control cloth

Standard Association of Australia （SAA）, The method used by the gluten meter

AS 1580.401.3:2002(R2013)
AS 5337:2019 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane
AS 1627.9:1989 Metal finishing - Preparation and pretreatment of surfaces - Pictorial surface preparation standards for painting steel surfaces

KR-KS, The method used by the gluten meter

KS I ISO 3746-2022 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure —Survey method using an enveloping measurement surface over a reflecting plane
KS M ISO 4311-2003(2023) Anionic and non-ionic surface active agents－Determination of the critical micellization concentration－Method by measuring surface tension with a plate, stirrup or ring
KS M ISO 8503-4-2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surf

Danish Standards Foundation, The method used by the gluten meter

DS/EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device
DS/EN ISO 24265:2020 Footwear – Test methods for uppers – Resistance to rubbing using a rubber strip (ISO 24265:2020)
DS/EN ISO 3746:2011 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
DS/ISO/PAS 11819-4:2013 Acoustics - Method for measuring the influence of road surfaces on traffic noise - Part 4: SPB method using backing board
DS 3000:2021 Washable reusable community face coverings – Requirements and test methods – AMENDMENT 1
DS/EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
DS/EN 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
DS/CEN/TS 13036-2:2010 Road and airfield surface characteristics - Test methods - Part 2: Assessment of the skid resistance of a road pavement surface by the use of dynamic measuring systems

AENOR, The method used by the gluten meter

UNE-EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device
UNE-EN ISO 3746:2011 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
UNE-EN 14086:2003 Paper and board - Measurement of specular gloss - 45o gloss with a parallel beam, DIN method

AT-ON, The method used by the gluten meter

OENORM EN ISO 24265:2021 Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020)

American National Standards Institute （ANSI), The method used by the gluten meter

ANSI/ASTM E162:2021 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ANSI/ASTM E2058a:2013 Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ANSI/ASTM A773/A 773M:2001 Test Method for D-C Magnetic Properties of Materials Using Ring and Permeameter Procedures with D-C Electronic Hysteresigraphs
ANSI/ASTM A977:1997 Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ANSI/ASTM E2307:2010 Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-Story Test Apparatus

Illuminating Engineering Society of North America, The method used by the gluten meter

IESNA LM-28-2012 Approved Method: IES Guide for the Selection, Care, and Use of Electrical Instruments in the Photometric Laboratory

ETSI - European Telecommunications Standards Institute, The method used by the gluten meter

EG 201 872-2001 Methods for Testing and Specification (MTS); Methodological Approach to the Use of Object-Orientation in the Standards Making Process (V1.2.1)
ETR 008-1990 Network Aspects (NA); the Method for the Characterisation of the Machine-Machine Interfaces Utilised by a Telecommunications Management Network (TMN)
TR 102 105-1999 Methods for Testing and Specification (MTS); Methodological Approach to the Use of Object-Orientation within the Standards Making Process; Initial Study (V1.1.1)

Japanese Industrial Standards Committee (JISC), The method used by the gluten meter

JIS A 1316:2022 Test method using cone calorimeter measuring heat release rate and smoke production rate for building materials

GOSTR, The method used by the gluten meter

PNST 397-2020 Automobile roads of general use. Method of determining the operating conditions of structural layers of road pavement

Canadian General Standards Board （CGSB), The method used by the gluten meter

CGSB 9.0 NO. 4-92-CAN/CGSB-1992 Methodes D'Essai Des Pates Et Du Papier Comportement A La Traction Des Papiers Et Cartons (A L'Aide D'Un Appareil A Vitesse Constante D'Allongement)

European Telecommunications Standards Institute (ETSI), The method used by the gluten meter

ETSI ETR 008-1990 Network Aspects (NA); the Method for the Characterisation of the Machine-Machine Interfaces Utilised by a Telecommunications Management Network (TMN)

Institute of Electrical and Electronics Engineers (IEEE), The method used by the gluten meter

IEEE/ANSI N42.14-1999 Calibration and use of germanium spectrometers for the measurement of gammma-ray emission rates of radionuclides

American Gear Manufacturers Association, The method used by the gluten meter

AGMA 96FTM2-1996 New Way of Manufacturing Bevel and Hypoid Gears in a Continuous Process

CENELEC - European Committee for Electrotechnical Standardization, The method used by the gluten meter

EN 61290-10-1:2003 Optical amplifiers Test methods Part 10-1: Multichannel parameters Pulse method using an optical switch and optical spectrum analyzer
EN 61290-10-2:2003 Optical amplifiers - Test methods Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer

NO-SN, The method used by the gluten meter

NS 8018-1993 Geotechnical testing. Laboratory methods. Determination of one-dimensional consolidation properties by oedometer testing. Method using continuous loading

U.S. Military Regulations and Norms, The method used by the gluten meter

ARMY MIL-STD-191 A-1956 METHOD AND PROCEDURE FOR OVERALL CALIBRATION OF ILLUMINOMETER FOR USE IN ACCEPTANCE TESTING OF PYROTECHNIC ILLUMINANTS

ESDU - Engineering Sciences Data Unit, The method used by the gluten meter

ESDU 96029 A-1997 VGK METHOD FOR TWO-DIMENSIONAL AEROFOIL SECTIONS PART 2: USER MANUAL FOR OPERATION WITH MS-DOS AND UNIX SYSTEMS

NZ-SNZ, The method used by the gluten meter

NZS 4407.4.2.1:1991 Methods of sampling and testing road aggregates Test 4.2.1 Method using a nuclear surface moisture-density gauge - Direct transmission mode
NZS 4407.4.2.2:1991 Methods of sampling and testing road aggregates Test 4.2.2 Method using a nuclear surface moisture-density gauge - Backscatter mode