ZH
RU
ES
High Energy Particle Physics
High Energy Particle Physics, Total:316 items.
In the international standard classification, High Energy Particle Physics involves: Geology. Meteorology. Hydrology, Radiation measurements, Medical equipment, Nuclear energy engineering, Products of the chemical industry, Soil quality. Pedology, Construction materials, Non-metalliferous minerals, Ventilators. Fans. Air-conditioners, Continuous handling equipment, Medical sciences and health care facilities in general, Wastes, Non-ferrous metals, Particle size analysis. Sieving, Products of the textile industry, Cellular materials, Rubber and plastics products, Plastics, Natural gas, Test conditions and procedures in general, Paint ingredients, Fluid power systems, Leather technology, Footwear, Interface and interconnection equipment, Wood, sawlogs and sawn timber, Open systems interconnection (OSI), Aerospace electric equipment and systems, Ceramics, Air quality, Safety of machinery, Ergonomics, Water quality, Installations in buildings, Environmental protection, Road vehicle systems, Fertilizers, Space systems and operations, Protection of and in buildings, Integrated circuits. Microelectronics, Company organization and management, Electronic components in general, Tea. Coffee. Cocoa, Protection against fire, Aircraft and space vehicles in general, On-board equipment and instruments.
中国气象局, High Energy Particle Physics
- QX/T 546-2020 Terminology for space high-energy particle radiation effects
RU-GOST R, High Energy Particle Physics
- GOST R 25645.165-2001 Solar energetic particles. Probabilistic model for proton fluxes
- GOST R 50517-1993 Polymer membranes. The method of determination of weight fraction of latex particles not permeated through microfiltration membranes
- GOST EN 1005-5-2014 Safety of machinery. Human physical performance. Part 5. Risk assessment for epetitive handling at high frequency
- GOST R 54205-2010 Resources conservation. Waste treatment. Best available techniques for improving energy efficiency on incineration
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, High Energy Particle Physics
- GB/T 15812-1995 Flexible polymeric tubes for medical use--Physical perfomence test method
- GB/T 14564-1993 The method of kaolin clay physical properties
- GB/T 31057.1-2014 Granular materials.The physical properties.Part 1:Determination of apparent density
- GB/T 20170.1-2006 Test method of physical characters of rare earth metals and compounds.Determination for particle size distribution of rare earth compounds
- GB/T 6609.37-2009 Chemical analysis methods and determination of physical performance of alumina-Part 37: Determination of the particles size content less than 20μm
- GB/T 6609.27-2004 Chemical analysis methods and determination of physical performance of alumina Particle size analysis-Sieving method
- GB/T 6609.27-2023 Methods of chemical analysis and determination of physical properties of alumina Part 27: Particle size analysis and sieving method
- GB/T 6609.27-2009 Chemical analysis methods and determination of physical performance of alumina.Part 27:Partical size analysis.Method using electriformed sieves
- GB/T 6609.28-2004 Chemical analysis methods and determination of physical performance of alumina Determination of the fine particle size distribution(less than 60μm)-Method using electroformed sieves
Professional Standard - Building Materials, High Energy Particle Physics
- JC/T 2018-2010 Thallium doped cesium iodide crystal for high-energy particles detection
Association Francaise de Normalisation, High Energy Particle Physics
- NF T70-328:1995 Energetic materials for defense. Physical-chemical analysis and properties. Grit particle of high explosives.
- NF T70-334:2013 Energetic materials for defence - Physical-chemical analysis and properties - Particle size by dry mechanical screening of high explosives
- NF T70-332:2013 Energetic materials for defence - Physical-chemical analysis and properties - Particle size by manual underwater screening of high explosives
- NF T70-333:2013 Energetic materials for defence - Physical-chemical analysis and properties - Particle size by underwater mechanical screening of high explosives
- NF T70-334:1995 Energetic materials for defense. Physical-chemical analysis and properties. Particle size by dry mechanical screening of high explosives
- NF T70-333:1995 Energetic materials for defense. Physical-chemical analysis and properties. Particle size by underwater mechanical screening of high explosives.
- NF T70-332:1995 Energetic materials for defense. Physical-chemical analysis and properties. Particle size by manual underwater screening of high explosives
- NF P18-650-6/A1:2006 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption.
- NF T70-358:2004 Energetic materials for defense - Physical chemical analyses and properties - Density of plate or grain high explosives - Method hydrostatic scale method
- NF T70-335:1995 Energetic materials for defense. Physical-chemical analysis and properties. Determination of average diameter. Method with the sub-sieve-sizer Fisher.
- NF T70-315:2004 Energetic materials for defense - Physical-chemical analysis and properties - Tensile properties.
- NF T70-314:2004 Energetic materials for defense - Physical-chemical analysis and properties - Compression properties
- NF T70-363:1996 Energetic materials for defense. Physico-chemical analysis and properties. Freeness. Gravity method.
- NF T70-357:2007 Energetic materials for defence - Physico-chemical analysis and properties - Determination of metallic elements by atomic absorption spectrophotometry
- NF T70-329:2003 Energetic materials for defense - Physical-chemical analysis and properties - Tensile creep
- NF T70-314:1995 ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. COMPRESSION PROPERTIES.
- NF T70-329:1995 ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. TENSILE CREEP.
- NF T70-364:2003 Energetic materials for defense - Physical-chemical analysis and properties - Implementation ability by compression of powdered explosives.
- NF T70-364:2014 Energetic materials for defense - Physical-chemical analysis and properties - Implementation ability by compression of powdered explosives
- NF P18-650-6:2014 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
- NF T70-327:1995 Energetic materials for defense. Physical-chemical analysis and properties. Insoluble components of high explosives.
- NF T70-336:2013 Energetic materials for defense - Physical-chemical analysis and properties - Microhardness
- NF T70-336:1995 Energetic materials for defense. Physical-chemical analysis and properties. Microhardness
- NF P18-650-6*NF EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
- NF T70-330:2003 Energetic materials for defense - Physical-chemical analysis and properties - Tensile stress relaxation.
- NF T70-330:1995 ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. TENSILE STRESS RELAXATION.
- NF B43-211:2004 Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity.
- NF T70-356:2007 Energetic materials for defence - Physical-chemical analysis and properties - Hygroscopicity of materials
- NF T70-316:1995 Energetic materials for defense. Physical-chemical analysis and properties. Shore hardness.
- NF B43-208:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2 : determination of thermal diffusivity.
- NF T70-319:1995 Energetic materials for defense. Physical-chemical analysis and properties. Double extraction of high explosives with solvent.
- NF T70-362:2007 Energetic materials for defence - Physico-chemical analysis and properties - Dimensions of spangle gun propellants and ball powders
- NF T70-365:2003 Energetic materials for defense - Physical-chemical analysis and properties - Characterisation of the bonding between energetic materials and liners, inhibitors and thermal protections, shear.
- NF T70-366:2003 Energetic materials for defense - Physical-chemical analysis and properties - Characterisation of the bonding between energetic materials and liners, inhibitors and thermal protections, normal traction.
- NF T70-366:2010 Energetic materials for defense - Physical-chemical analysis and properties - Characterisation of the bonding between energetic materials and liners, inhibitors and thermal protections, normal traction
- NF T70-365:2010 Energetic materials for defense - Physical-chemical analysis and properties - Characterisation of the bonding between energetic materials and liners, inhibitors and thermal protections, shear
- NF T70-323:1995 Energetic materials for defense. Physical-chemical analysis and properties. Moisture of high explosives containing less than 2 per cent of water.
- NF T70-324:1995 Energetic materials for defense. Physical-chemical analysis and properties. Moisture of high explosives containing more than 2 per cent of water.
- NF B43-365*NF EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity
- NF T70-325:1995 Energetic materials for defense. Physical-chemical analysis and properties. Acidity or alcalinity of high explosives. Method by dissolution and indicator.
- NF B43-207*NF EN ISO 17139:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion
- NF EN 16171:2016 Boues, bio-déchets traités et sols - Détermination des éléments en traces par spectrométrie de masse avec plasma induit par haute fréquence (ICP-MS)
- NF X43-283-6*NF EN 13205-6:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6 : transport and handling tests
- NF T70-302:1995 Energetic materials for defense. Physical-chemical analysis and properties. Tnt solidifcation temperature. Automatized method.
- NF P41-600-1*NF EN 13443-1+A1:2007 Water conditioning equipment inside buildings - Mechanical filters - Part 1 : particle rating 80 Šm to 150 Šm - Requirements for performances, safety and testing.
- NF T70-326:1995 Energetic materials for defense. Physical-chemical analysis and properties. Acidity or alcalinity of hexanitrostilben (hns).
- NF T70-339:2004 Energetic materials for defense - Physico-chemical analyses and properties - Moisture and volatile materials of pyrotechnic compositions - Method by drying at 105 oC
- NF T70-322:1995 Energetic materials for defense. Physical-chemical analysis an dproperties. N-methyl-4 nitro-aniline (mna) in high explosives. Method by liquid chromatography.
- NF T70-321:1995 Energetic materials for defense. Physical-chemical analysis and properties. Nitroglycerine, bttn and 2-ndpa in high explosives. Method by liquid chromatography.
- NF EN 13443-2+A1:2007 Appareils de traitement d'eau à l'intérieur des bâtiments - Filtres mécaniques - Partie 2 : particules de taille 1 µm et 80 µm - Exigences de performances, de sécurité et essais
- NF EN 13443-2/IN1:2007 Appareils de traitement d'eau à l'intérieur des bâtiments - Filtres mécaniques - Partie 2 : particules de taille 1 µm et 80 µm - Exigences de performances, de sécurité et essais
- NF T70-359:1996 Energetic materials for defense. Physico-chemical analysis and properties. Measurement of the duration of the outflow on the tnt or tnt compositions with the efflux viscosimeter
- NF T70-312:1995 Energetic materials for defense. Physical-chemical analysis and properties. Dimensions of tubular or multiple holes gun propellant.
- NF EN 16170:2016 Boues, bio-déchets traités et sols - Détermination des éléments en traces par spectrométrie d'émission optique avec plasma induit par haute fréquence (ICP-OES)
- NF B43-404*NF EN ISO 19629:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method
- NF T70-317:1996 Energetic materials for defense. Physico-chemical analysis and properties. Compressibility determination by mercury compression recorder.
- NF T70-300:2007 Energetic materials for defence - Physico-chemical analysis and properties - Moisture of materials Karl Fischer volumetric method.
- NF T70-313:2014 Energetic materials for defense - Physical-chemical analysis and properties - Coefficient of linear thermal expansion by direct measurement
- NF T70-313:1995 Energetic materials for defense. Physical-chemical analysis and properties. Coefficient of linear thermal expansion by direct measurement.
- NF T70-346:1996 Energetic materials for defense. Physico-chemical analysis and properties. Determination of viton in octoviton. Method by extraction.
- NF T70-337:1997 Energetic materials for defense. Physico-chemical analysis and properties. Determination of secondary explosive constituents by room temperature extraction.
- NF T70-359:2013 Energetic materials for defense - Physico-chemical analyses and properties - Measurement of the duration of the outflow on the TNT or TNT compositions with the EFFLUX viscosimeter
- NF EN 13443-1+A1:2007 Appareils de traitement d'eau à l'intérieur des bâtiments - Filtres mécaniques - Partie 1 : particules de dimension comprise entre 80 µm et 150 µm - Exigences de performances et de sécurité, essais
- NF EN 13443-1/IN1:2007 Appareils de traitement d'eau à l'intérieur des bâtiments - Filtres mécaniques - Partie 1 : particules de dimension comprise entre 80 µm et 150 µm - Exigences de performances et de sécurité, essais
- NF T70-347:1997 Energetic materials for defense. Physico-chemical analysis and properties. Determination of graphite content in secondary explosives by extraction.
Korean Agency for Technology and Standards (KATS), High Energy Particle Physics
- KS F 2341-2007 Standard method for wet preparation of soil samples for particle size analysis and determination of soil constants
- KS F 2341-1982 Standard method for wet preparation of soil samples for particle size analysis and determination of soil constants
- KS B ISO 11500-2014(2019) Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
- KS X ISO/IEC 11518-10:2003 Information technology-High-performance parallel interface-Part 10:6 400 Mbit/s Physical Layer(HIPPI-6400-PH)
- KS X ISO/IEC 11518-6:2001 Information technology-High-Performance Parallel Interface-Part 6:Physical Switch Control(HIPPI-SC)
- KS X ISO/IEC 11518-6-2001(2021) Information technology — High-Performance Parallel Interface —Part 6: Physical Switch Control(HIPPI-SC)
- KS X ISO/IEC 11518-10-2003(2018)
- KS X ISO/IEC 11518-6-2001(2016) Information technology — High-Performance Parallel Interface —Part 6: Physical Switch Control(HIPPI-SC)
- KS H ISO 11292:2007 Instant coffee－Determination of free and total carbohydrate contents－Method using high-performance anion-exchange chromatography
Professional Standard - Nuclear Industry, High Energy Particle Physics
American Society of Mechanical Engineers (ASME), High Energy Particle Physics
American Society for Testing and Materials (ASTM), High Energy Particle Physics
- ASTM F1471-93(2001) Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System
- ASTM D2187-94(2004) Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins
- ASTM D2187-94(2009)e1 Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins
- ASTM D2187-94(2009) Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins
- ASTM D2187-94(1998) Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins
- ASTM D6650-01 Standard Test Method for Determining the Dynamic Wiping Efficiency, Wet Particle Removal Ability, and Fabric Particle Contribution of Nonwoven Fabrics Used in Cleanrooms
- ASTM D2187-17 Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins
- ASTM E3060-16 Standard Guide for Subvisible Particle Measurement in Biopharmaceutical Manufacturing Using Dynamic (Flow) Imaging Microscopy
CZ-CSN, High Energy Particle Physics
Professional Standard - Military and Civilian Products, High Energy Particle Physics
- WJ 2707.2-2008 Test methods for physical and chemical properties of cloud explosives Part 2: Particle size
Professional Standard - Machinery, High Energy Particle Physics
- JB/T 9014.2-1999 Continuous handling equipment.Loose bulk material.The general rules for test methods for physical performance
Group Standards of the People's Republic of China, High Energy Particle Physics
- T/CAMDI 016-2018 Quality management specification for the production of polyvinyl chloride pellets for medical polymer products
- T/CASME 870-2023 Plasma melting system for hazardous waste
- T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
- T/BTQSA 005-2020 NdFeB permanent magnet alloy powder physical properties test method laser particle size determination
- T/HDSC 001-2022 Huidong Ladies Shoes Guidelines for physical and mechanical properties of high quality shoes materials
- T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
European Committee for Standardization (CEN), High Energy Particle Physics
- EN 1097-7:1999 Tests for Mechanical and Physical Properties of Aggregates - Part 7: Determination of the Particle Density of Filler - Pyknometer Method
- EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
- FprEN 1097-6-2021 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- EN 1097-10:2014 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
- PREN 1097-7-2020 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
- EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
- EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
- EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
- EN 1097-10:2002 Tests for Mechanical and Physical Properties of Aggregates - Part 10: Determination of Water Suction Height
- EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity (ISO 19628:2017)
- EN ISO 17139:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion (ISO 17139:2014)
- EN 821-1:1995 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 1: Determination of thermal expansion
- EN 13366:2001 Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients
- EN 821-2:1997 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method
- EN 1097-2:1998 Tests for Mechanical and Physical Properties of Aggregates - Part 2: Methods for the Determination of Resistance to Fragmentation Includes amendment A1:July 2006
- EN 1389:2003 Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity
- EN 13443-1:2002+A1:2007 Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing
- EN ISO 19629:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method (ISO 19629:2018)
- EN 1097-5:1999 Test for Mechanical and Physical Properties of Aggregates - Part 5: Determination of the Water Content by Drying in a Ventilated Oven
- EN 821-3:2005 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity
- CEN EN 13040-2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
- CEN EN 13040-2007_ Soil improvers and
growing media —
Sample preparation for
chemical and physical
tests, determination of
dry matter content,
moisture content and
laboratory compacted
bulk density
工业和信息化部, High Energy Particle Physics
- YB/T 4808-2020 Method for determination of high temperature physical properties of iron and steel smelting slag
- YS/T 1065.2-2015 Methods for determination of physical properties of zeolites Part 2: Determination of particle size Centrifugal sedimentation method
Professional Standard - Rare Earth, High Energy Particle Physics
- XB/T 701-2015 Samarium cobalt permanent magnet alloy powder test methods.Determination of particle size and distributions
- XB/T 701-2007 Test methods samarium cobalt permanent magnet alloy powder- Determination of particle size- Fisher method
国家市场监督管理总局、中国国家标准化管理委员会, High Energy Particle Physics
- GB/T 31057.2-2018 Granular materials—Physical properties—Part 2: Determination of tap density
- GB/T 31057.3-2018 Granular materials—Physical properties—Part 3: Fluidity index
- GB/T 37312.1-2019 Process management for avionics—Electronic components for aerospace, defence and high performance (ADHP) applications—Part 1: General requirements for high reliability integrated circuits and discrete semiconductors
Professional Standard - Non-ferrous Metal, High Energy Particle Physics
- YS/T 438.1-2001 Methods for physical performance determination of sandy alumina.Determination of size distribution.Sieving method
- YS/T 438.1-2013 Methods for physical performance determination of sandy alumina.Part 1:Determination of size distribution-sieving method
- YS/T 1065.4-2015 Methods for physical performance determination of zeolite.Part 4:Determination of non-ionic liquid-carrying capacity
- YS/T 581.12-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 12:Determination of size distribution-Sieving method
British Standards Institution (BSI), High Energy Particle Physics
- BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
- BS EN ISO 12213-3:2009 Natural gas - Calculation of compression factor - Calculation using physical properties
- BS EN 1097-6:2013 Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
- DD IEC/TS 62396-4:2008 Process management for avionics. Atmospheric radiation effects - Guidelines for designing with high voltage aircraft electronics and potential single event effects
- DD IEC/PAS 62396-4:2007 Process management for avionics. Atmospheric radiation effects - Guidelines for designing with high voltage aircraft electronics and potential single event effects
- ISO/IEC 11518-6:2000 Ed 2 Information technology. High-Performance Parallel Interface - Physical Switch Control (HIPPI-SC)
- PD IEC/TR 62240-1:2018 Tracked Changes. Process management for avionics. Electronic components capability in operation. Temperature uprating
- BS ISO 20290-5:2023 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of particle size distribution by sieving method
- BS EN 1097-6:2022 Tracked Changes. Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
- ISO/IEC 11518-10:2001 Ed 1 Information technology. High-Performance Parallel Interface - 6 400 Mbit/s Physical Layer (HIPPI-6400-PH)
- DD ENV 821-3-1994 Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Determination of specific heat capacity
- BS EN 13205-6:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Transport and handling tests
- BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
- BS EN 1097-7:2022 Tracked Changes. Tests for mechanical and physical properties of aggregates. Determination of the particle density of filler. Pyknometer method
- BS EN 13443-2:2005+A1:2007 Water conditioning equipment inside buildings - Mechanical filters - Particle rating 1 Šm to less than 80 Šm - Requirements for performance, safety and testing
- BS EN 13443-2+A1:2006 Water conditioning equipment inside buildings. Mechanical filters. Particle rating 1 $Gmm to less than 80 $Gmm. Requirements for performance, safety and testing
- BS DD CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Determination of thermal conductivity
- 20/30392580 DC BS EN 1097-6. Tests for mechanical and physical properties of aggregates. Part 6. Determination of particle density and water absorption
- BS ISO 19628:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of specific heat capacity
- BS ISO 17139:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of thermal expansion
- DD ENV 1159-1-1994 Advanced technical ceramics. Ceramic composites. Thermophysical properties. Determination of thermal expansion
- BS EN 1159-3:2003 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3:Determination of specific heat capacity
- BS EN 13366:2001(2010) Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients
- BS EN 13366:2001 Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients
- BS EN 13443-2:2005 Water conditioning
equipment inside
buildings — Mechanical
filters —
Part 2: Particle rating 1 4m to less than
80 4m — Requirements for performance,
safety and testing
- 20/30424361 DC BS EN 1097-7. Tests for mechanical and physical properties of aggregates - Part 7. Determination of the particle density of filler. Pyknometer method
- 19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
- BS ISO 17520:2016 Space environment (natural and artificial). Cosmic ray and solar energetic particle penetration inward the magnetosphere. Method of determination of the effective vertical cut-off rigidity
- BS PAS 2030 Online 5 Licences:2014 Improving the energy efficiency of existing buildings. Specification for installation process, process management and service provision
- BS PAS 2030 Online 10 Licences:2014 Improving the energy efficiency of existing buildings. Specification for installation process, process management and service provision
- BS PAS 2030 Online Single Licence:2014 Improving the energy efficiency of existing buildings. Specification for installation process, process management and service provision
- BS PAS 2030 Online 3 Licences:2014 Improving the energy efficiency of existing buildings. Specification for installation process, process management and service provision
- BS EN 1389:2004 Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity
- DD CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity
- BS EN 1389:2003 Advanced technical ceramics - Ceramic composites - Physical properties - Physical properties - Determination of density and apparent porosity
- BS EN IEC 63203-801-1:2022 Wearable electronic devices and technologies - Smart body area network (SmartBAN). Enhanced ultra-low power physical layer
- 22/30408122 DC BS ISO 20290-5. Aggregates for concrete. Test methods for mechanical and physical properties. Part 5. Determination of particle size distribution by sieving method
- BS PD IEC/TS 62686-1:2015 Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications. General requirements for high reliability integrated circuits and discrete semiconductors
- BS ISO 19629:2018 Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of unidimensional thermal diffusivity by flash method
- 23/30432825 DC BS ISO 17520. Space environment (natural and artificial). Cosmic ray and solar energetic particle penetration inward the magnetosphere. Method of determination of the effective vertical cut-off rigidity
- PD IEC TS 62686-1:2020 Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications. General requirements for high reliability integrated circuits and discrete semiconductors
- BS 5551 Sec.3.4:1987 Fertilizers. Physical properties. Method for determination of oil retention of high nitrogen content, straight ammonium nitrate fertilizers
PL-PKN, High Energy Particle Physics
- PN C87060-03-1987 Fertilizers Determination of physical properties of powder and crystalline fertilizers Determination of size composition
- PN Z04002 Arkusz 05-1974 Air purity protection Tests of dust physical properties Determination of average porosity and average kinecic size of dust particles
- PN Z04002 Arkusz 03-1974 Air purity protection Tests of dust physical properties Determination of average mass and average statical volumetric size of dust particles
Inner Mongolia Provincial Standard of the People's Republic of China, High Energy Particle Physics
- DB15/T 1408-2018 NdFeB permanent magnet alloy powder physical properties test method laser particle size determination
International Organization for Standardization (ISO), High Energy Particle Physics
- ISO/TS 23366:2023 Nanotechnologies — Performance evaluation requirements for quantifying biomolecules using fluorescent nanoparticles in immunohistochemistry
- ISO 22157-1:2004 Bamboo - Determination of physical and mechanical properties - Part 1: Requirements
- ISO 16014-3:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
- ISO 16014-3:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
- ISO/DIS 6980-2:2022 Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
- ISO/FDIS 6980-2:2011 Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
- ISO/IEC 11518-6:1996 Information technology — High-Performance Parallel Interface — Part 6: Physical Switch Control (HIPPI-SC)
- ISO/IEC 11518-10:2001 Information technology - High-performance parallel interface - Part 10: 6400 Mbit/s Physical Layer (HIPPI-6400-PH)
- ISO/IEC 11518-6:2000 Information technology - High-Performance Parallel Interface - Part 6: Physical Switch Control (HIPPI-SC)
- ISO 6980-2:2022 Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
- ISO/FDIS 11898-2:2023 Road vehicles — Controller area network (CAN) — Part 2: High-speed physical medium attachment (PMA) sub-layer
- ISO 17139:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion
- ISO 19628:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity
- ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
- ISO 20290-5:2023 Aggregates for concrete — Test methods for mechanical and physical properties — Part 5: Determination of particle size distribution by sieving method
- ISO 17520:2016 Space environment (natural and artificial) - Cosmic ray and solar energetic particle penetration inward the magnetosphere - Method of determination of the effective vertical cut-off rigidity
- ISO/DIS 17520:2023 Space environment (natural and artificial) — Cosmic ray and solar energetic particle penetration inward the magnetosphere — Method of determination of the effective vertical cut-off rigidity
- ISO 11292:1995 Instant coffee - Determination of free and total carbohydrate contents - Method using high-performance anion-exchange chromatography
- ISO 19629:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method
- ISO/TR 15655:2020 Fire resistance — Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design
Professional Standard - Light Industry, High Energy Particle Physics
- QB/T 2712-2005 Leather-Physical and mechanical tests-Determination of distension and strength of grain-Ball burst test
Lithuanian Standards Office , High Energy Particle Physics
- LST EN 1097-6+AC-2003 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- LST EN 1097-6+AC-2003/A1-2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- LST EN 1097-6-2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- LST EN 1097-10-2003 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
- LST EN 1097-7-2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
- LST EN 1097-10-2014 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
- LST EN 821-1-2002 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 1: Determination of thermal expansion
- LST EN 1389-2004 Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity
- LST EN 1159-3-2003 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
- LST EN 1159-3-2003/AC-2007 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
- LST EN 1159-3-2003/AC-2008 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
Danish Standards Foundation, High Energy Particle Physics
- DS/EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- DS/EN 1097-10:2003 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
- DS/EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
- DS/EN 821-1:1996 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 1: Determination of thermal expansion
- DS/EN 821-3:2005 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity
- DS/EN 1159-3/AC:2008 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
- DS/EN 1159-3:2003 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
- DS/CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity
- DS/EN 1389:2004 Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity
- DS/EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) – Thermophysical properties of ceramic composites – Determination of specific heat capacity (ISO 19628:2017)
AENOR, High Energy Particle Physics
- UNE-EN 1097-6:2014 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- UNE-EN 1097-10:2015 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
- UNE-EN 1097-7:2009 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
German Institute for Standardization, High Energy Particle Physics
- DIN EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
- DIN EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998
- DIN EN 1097-6:2022-05 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2022
- DIN EN 1097-6:2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2000 + AC:2002 + A1:2005
- DIN EN 1097-6:2020 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German and English version prEN 1097-6:2020
- DIN EN 1097-10:2003 Tests for mechanical and physical properties of aggregates - Part 10: Determination of the water suction height; German version EN 1097-10:2002
- DIN EN 1389:2004 Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity; German version EN 1389:2003
- DIN CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity; German version CEN/TS 1159-4:2004
- DIN EN 1097-7:2022-12 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German version EN 1097-7:2022
- DIN EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
- DIN EN 1097-10:2014-09 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height; German version EN 1097-10:2014
- DIN EN 1097-7:2020 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German and English version prEN 1097-7:2020
- DIN EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; English version of DIN EN 1097-7:2008-06
- DIN EN 821-3:2005 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity; German version EN 821-3:2005
- DIN EN 821-2:1997 Advanced technical ceramics - Monolithic ceramics, thermo-physical properties - Part 2: Determination of thermal diffusity by the laser flash (or heat pulse) method; German version EN 821-2:1997
- DIN EN 13443-1:2007 Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 μm to 150 μm - Requirements for performances, safety and testing (includes Amendment A1:2007); English version of DIN EN 13443-1:2007-12
- DIN EN 1159-3:2008 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity(includes Corrigendum AC:2008); English version of DIN EN 1159-1:2008-06
- DIN EN 1159-1:2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion (includes Corrigendum AC:2007); English version of DIN EN 1159-1:2007
- DIN EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2013
- DIN EN 1097-10:2014 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height; German version EN 1097-10:2014
- DIN EN 1097-6 Berichtigung 1:2008 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2000 + AC:2002 + A1:2005, Corrigendum to DIN EN 1097-6:2005-12
- DIN EN 1097-7 Berichtigung 1:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German version EN 1097-7:2008, Corrigendum to DIN EN 1097-7:2008-06
ANSI - American National Standards Institute, High Energy Particle Physics
- X3.222-1997 Information Technology - High-Performance Parallel Interface - Physical Switch Control (HIPPI-SC)
- INCITS 222-1997 Information Technology - High-Performance Parallel Interface - Physical Switch Control (HIPPI-SC)
- X3.222-1993 Information Systems - High-Performance Parallel Interface@ Physical Switch Control (HIPPI-SC)
- INCITS 323 AMD 1-2000 Information Technology - High-Performance Parallel Interface - 6400 Mbit/s Physical Layer (HIPPI-6400-PH)
- INCITS 323-1998 Information Technology - High-Performance Parallel Interface - 6400 Mbit/s Physical Layer (HIPPI-6400-PH)
- INCITS 324-1999 Information Technology - High-Performance Parallel Interface - 6400 Mbit/s Physical Switch Control (HIPPI-6400-SC)
未注明发布机构, High Energy Particle Physics
- DIN EN 1097-6:2001 Tests for mechanical and physical properties of aggregates — Part 6: Determination of particle density and water absorption
- DIN EN 1097-7:1999 Tests for mechanical and physical properties of aggregates — Part 7: Determination of the particle density of filler — Pycnometer method
- DIN EN ISO 19629:2022 High-performance ceramics – Thermophysical properties of ceramic composite materials – Determination of one-dimensional thermal conductivity using flash methods
- DIN EN ISO 17139:2022 High-performance ceramics – Thermophysical properties of ceramic composites – Determination of thermal expansion (ISO 17139:2014); German version EN ISO 17139:2022
American National Standards Institute （ANSI), High Energy Particle Physics
- ANSI/INCITS 323 AMD 1-2001 Information Technology - High-Performance Parallel Interface - 6400 Mbit/s Physical Layer Amendment 1
- ANSI/INCITS 222-1997 Information Technology - High-Performance Parallel Interface - Physical Switch Control (HIPPI-SC) Replaces ANSI X3.222-1997
- ANSI/INCITS 323AMD 1-2001 Information Technology - High-Performance Parallel Interface - 6400 Mbit/s Physical Layer (HIPPI-6400-PH) Amendment 1
- ANSI/INCITS 323-1998(R2006) for Information Technology - High-Performance Parallel Interface - 6400 Mbith Physical Layer (HIPPI-6400-PH)
- ANSI/GEIA STD-0005-1-A-2012 Standard for Managing the Use of Pb-Free Solder and Finishes in Aerospace, Defense and High Performance Electronic Systems
- ANSI/INCITS 324-1999 Information Technology - High-Performance Parallel Interface - 6400 Mbit/s Physical Switch Control (HIPPI-6400-SC) (formerly ANSI NCITS 324-1999)
International Electrotechnical Commission (IEC), High Energy Particle Physics
- IEC TR 62240-1:2018 RLV Process management for avionics - Electronic components capability in operation - Part 1: Temperature uprating
- IEC TR 62240-1:2018 Process management for avionics - Electronic components capability in operation - Part 1: Temperature uprating
- IEC TS 62686-1:2015 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and disc
- IEC TS 62686-1:2020 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and disc
- IEC TS 62686-1:2012 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and discrete semiconductors
- IEC TS 62686-1:2020 RLV Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and disc
- IEC PAS 62686-2:2016 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components
- IEC TS 62686-2:2019 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components
Society of Automotive Engineers (SAE), High Energy Particle Physics
- SAE GEIASTD0005_3A-2018 Performance Testing for Aerospace and High Performance Electronic Interconnects Containing Pb-free Solder and Finishes
- SAE GEIAHB0005_2-2016 Technical Guidelines for Aerospace and High Performance Electronic Systems Containing Lead-free Solder and Finishes
North Atlantic Treaty Organization Standards Agency, High Energy Particle Physics
- STANAG 2906-1998 ESSENTIAL PHYSICAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS OF FIELD TYPE HIGH PRESSURE STEAM STERILIZERS
Japanese Industrial Standards Committee (JISC), High Energy Particle Physics
- JIS X 5270-6:1997 Information technology -- High-Performance Parallel Interface -- Part 6: Physical Switch Control (HIPPI-SC)
- JIS B 9927-1:2022 High-efficiency filters (EPA, HEPA and ULPA) and filter media for removing particles in air -- Part 1: Classification, performance, testing and marking
IT-UNI, High Energy Particle Physics
- UNI EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity
Canadian Standards Association (CSA), High Energy Particle Physics
- CAN/CSA-ISO/IEC 11518-10:2002 Information technology – High-performance parallel interface Part 10: 6 400 Mbit/s Physical Layer (HIPPI-6400-PH)
- CAN/CSA-ISO/IEC 11518-6:2002 Information Technology - High-Performance Parallel Interface - Part 6: Physical Switch Control (HIPPI-SC) (Second Edition)
- CSA ISO/IEC-11518-10-02:2002 Information technology High-performance parallel interface Part 10: 6 400 Mbit/s Physical Layer (HIPPI-6400-PH) ISO/IEC 11518-10:2001
Professional Standard - Electron, High Energy Particle Physics
- SJ/Z 2976-1988 Test method for physical characteristics of brazing for electronic devices--Determination of pull brazed away temperature of brazing
VN-TCVN, High Energy Particle Physics
- TCVN 7033-2002 Instant coffee.Determination of free and total carbohydrate contents.Method using high-performance anion-exchange chromatography
US-CFR-file, High Energy Particle Physics
- CFR 10-20.2005-2014 Energy. Part20:Standards for protection against radiation. Subpart K:Waste Disposal. Section20.2005:Disposal of specific wastes.
- CFR 7-1709.13-2014 Agriculture. Part1709:Assistance to high energy cost communities. SubpartA:General requirements. Section1709.13:Grant administration.
- CFR 10-37.77-2014 Energy. Part37:Physical protection of category 1 and category 2 quantities of radioactive material. Subpart D:Physical Protection in Transit. Section37.77:Advance notification of shipment of category 1 quantities of radioactive material.
- CFR 10-20.2108-2014 Energy. Part20:Standards for protection against radiation. Subpart L:Records. Section20.2108:Records of waste disposal.
- CFR 10-37.7-2014 Energy. Part37:Physical protection of category 1 and category 2 quantities of radioactive material. Subpart A:General Provisions. Section37.7:Communications.
- CFR 10-37.43-2014 Energy. Part37:Physical protection of category 1 and category 2 quantities of radioactive material. Subpart C:Physical Protection Requirements During Use. Section37.43:General security program requirements.
Standard Association of Australia （SAA）, High Energy Particle Physics
NATO - North Atlantic Treaty Organization, High Energy Particle Physics
- STANAG 2906-1983 Essential Physical Requirements and Performance Characteristics of Field Type High Pressure Steam Sterilizers (ED 2 AMD 2; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int
European Telecommunications Standards Institute (ETSI), High Energy Particle Physics
- ETSI TS 102 230-2006 Smart cards; UICC-Terminal interface; Physical, electrical and logical test specification V3.8.0 Release 1999
- ETSI TS 102 230-2005 Smart cards; UICC-Terminal interface; Physical, electrical and logical test specification V5.4.0 Release 5
- ETSI TS 102 230-2007 Smart cards; UICC-Terminal interface; Physical, electrical and logical test specification V5.7.0; Release 5
- ETSI TS 102 230-2002 Smart Cards; UICC-Terminal Interface; Physical, Electrical and Logical Test Specification V4.1.0; Release 4
- ETSI TS 102 230-2004 Smart cards; UICC-Terminal interface; Physical, electrical and logical test specification V5.2.0; Release 5
- ETSI TS 102 230-2001 Smart Cards; UICC-Terminal Interface; Physical, Electrical and Logical Test Specification V4.0.0; Release 4
- ETSI TS 102 230-2003 Smart Cards; UICC-Terminal interface; Physical, electrical and logical test specification V5.0.0; Release 5
- ETSI TS 102 230-2008 Smart cards; UICC-Terminal interface; Physical, electrical and logical test specification V4.10.0; Release 4
- ETSI TS 102 230-2009 Smart cards; UICC-Terminal interface; Physical, electrical and logical test specification V7.0.0; Release 7
- ETSI TS 102 230-2010 Smart Cards; UICC-Terminal interface; Physical, electrical and logical test specification V8.0.0; Release 8
BELST, High Energy Particle Physics
- STB 1333.0-2002 Polymer products for building. The method of determination of longevity on an activation energy of thermal - oxidizing destruction of polymer materials
Defense Logistics Agency, High Energy Particle Physics
IEC - International Electrotechnical Commission, High Energy Particle Physics
- TS 62686-1-2012 Process management for avionics – Electronic components for aerospace@ defence and high performance (ADHP) applications – Part 1: General requirements for high reliability integrated circuits and discrete semiconductors (Edition 1.0)
- TS 62686-2-2019 Process management for avionics - Electronic components for aerospace@ defence and high performance (ADHP) applications - Part 2: General requirements for passive components (Edition 1.0)
- PAS 62686-2-2016 Process management for avionics – Electronic components for aerospace@ defence and high performance (ADHP) applications – Part 2: General requirements for passive components (Edition 1.0)
SAE - SAE International, High Energy Particle Physics
- SAE GEIASTD0005_3A-2012 Performance Testing for Aerospace and High Performance Electronic Interconnects Containing Pb-free Solder and Finishes (Formerly TechAmerica GEIA-STD-0005-3-REV A)