ZH
RU
ES

Separation of energetic particles

Separation of energetic particles, Total:263 items.

In the international standard classification, Separation of energetic particles involves: Geology. Meteorology. Hydrology, Radiation measurements, Products of the chemical industry, Nuclear energy engineering, Particle size analysis. Sieving, Test conditions and procedures in general, Farming and forestry, Ferrous metals, Raw materials for rubber and plastics, Analytical chemistry, Cellular materials, Rubber and plastics products, Air quality, Non-destructive testing, Non-ferrous metals, Powder metallurgy, Protection of and in buildings, Ventilators. Fans. Air-conditioners, Shipbuilding and marine structures in general, Medical equipment, Tea. Coffee. Cocoa, Ceramics, Electric road vehicles, Commercial vehicles, Paint ingredients, Plastics, Water quality, Medical sciences and health care facilities in general, Soil quality. Pedology, Testing of metals, Coatings and related processes used in aerospace industry, Energy and heat transfer engineering in general, Galvanic cells and batteries, Reinforced plastics, Astronomy. Geodesy. Geography, Company organization and management, Electronic components in general, Aerospace electric equipment and systems, On-board equipment and instruments, Production in the chemical industry, Installations in buildings, Construction materials, Leather technology, Semiconducting materials, Optical equipment, Waxes, bituminous materials and other petroleum products.

IT-UNI, Separation of energetic particles

RO-ASRO, Separation of energetic particles

STAS 9475/2-1974 ION EXCHANGERS Size analysis
STAS 7727-1985 POLYGRANULAR STANDARD SAND FOR TESTING THE CEMENTS ON PLASTIC MORTARS

中国气象局, Separation of energetic particles

QX/T 546-2020 Terminology for space high-energy particle radiation effects

RU-GOST R, Separation of energetic particles

GOST R 25645.165-2001 Solar energetic particles. Probabilistic model for proton fluxes
GOST 10900-1984 Ion-exchange resins. Methods of determination of granulometric composition
GOST R 50517-1993 Polymer membranes. The method of determination of weight fraction of latex particles not permeated through microfiltration membranes
GOST R ISO 16362-2009 Ambient air. Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography
GOST R ISO 12405-2-2014 Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems. Part 2. High-energy applications
GOST R 56815-2015 Polymer composites. Method for determination specific work of exfoliation in tearing off conditions GIC
GOST R 25645.158-1994 Earth's uppermost ionosphere. Model of distribution of the concentration of electrons in the flat of geomagnetic equator
GOST R ISO 15202-3-2008 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 3. Analysis
GOST R IEC 62660-1-2014 Secondary lithium-ion cells for the propulsion of electric road vehicles. Part 1. Performance testing
GOST R 58022-2017 Polymer composite crossarms. Method for determination of flexural mechanical properties
GOST R ISO 17226-1-2008 Leather. Chemical determination of formaldehyde content. Part 1. Method using high performance liquid chromatografy
GOST R ISO 15202-1-2007 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 1. Sampling
GOST R 56800-2015 Polymer composites. Determination of tensile properties of unreinforced and reinforced materials
GOST R EN 1822-2-2012 High efficiency air filters (EPA, HEPA and ULPA). Part 2. Aerosol production, measuring equipment, particle counting statistics

Military Standard of the People's Republic of China-General Armament Department, Separation of energetic particles

GJB 5108-2004 Specifications for space high-energy proton and heavy ion detectors
GJB 5108A-2019 Specifications for space high-energy proton and heavy ion detectors
GJB 2525-1995 General requirements for helicopter engine inlet particle separators
GJB 8684.22-2015 Test methods for pyrotechnic properties - Part 22: Determination of smoke solid particle number concentration by electron microscopy
GJB 8684.23-2015 Test methods for pyrotechnic properties - Part 23: Determination of particle size distribution of smoke solid particles by electron microscopy
GJB 10247.2-2021 Test methods for high temperature mechanical properties of high temperature resistant adhesives/sealants Part 2: Peel strength
GJB 10247.3-2021 Test methods for high temperature mechanical properties of high temperature resistant adhesives/sealants Part 3: Tear-off strength

Professional Standard - Building Materials, Separation of energetic particles

JC/T 2018-2010 Thallium doped cesium iodide crystal for high-energy particles detection

Professional Standard - Nuclear Industry, Separation of energetic particles

EJ/T 368-1989 HEPA filter performance test method

German Institute for Standardization, Separation of energetic particles

DIN 54407:2015 Testing of ion exchange resins - Determination of bead size distribution
DIN 54407:2003 Testing of ion exchange resins - Determination of bead size distribution
DIN 54407:2023-06 Testing of ion exchange resins - Determination of bead size distribution for mono- and heterodisperse ion exchange resins
DIN EN ISO 2871-1:2010-06 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010); German version EN ISO 2871-1:2010
DIN EN 17763:2022-12 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions; German version EN 17763:2022
DIN EN 17763:2022 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
DIN 6800-2:2020-08 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 2: Ionization chamber dosimetry of high energy photon and electron radiation
DIN EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010); German version EN ISO 2871-1:2010
DIN CEN ISO/TS 19590:2019-11*DIN SPEC 19286:2019-11 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry (ISO/TS 19590:2017); German version CEN ISO/TS 19590:2019
DIN 6800-2 Berichtigung 1:2010 Procedures of dosimetry with probe type detectors for photon and electron radiation - Part 2: Ionization chamber dosimetry of high energy photon and electron radiation, Corrigendum to DIN 6800-2:2008-03
DIN 6800-2:2008 Procedures of dosimetry with probe type detectors for photon and electron radiation - Part 2: Ionization chamber dosimetry of high energy photon and electron radiation
DIN 6809-6:2004 Clinical dosimetry - Part 6: Application of high energy photon and electron radiation in percutaneous radiotherapy

Institute of Environmental Sciences and Technology, Separation of energetic particles

IEST RP-CC042.1-2011 Sizing and Counting of Submicrometer Liquid-borne Particles Using Optical Discrete-particle Counters

American Society for Testing and Materials (ASTM), Separation of energetic particles

ASTM D1782-17 Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
ASTM D1782-95(2007) Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
ASTM D1782-95(2001) Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
ASTM D1782-95(2009) Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
ASTM D5542-04(2009) Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM E3084-17(2022)e1 Standard Practice for Characterizing Particle Irradiations of Materials in Terms of Non-Ionizing Energy Loss (NIEL)
ASTM E3084-17 Standard Practice for Characterizing Particle Irradiations of Materials in Terms of Non-Ionizing Energy Loss (NIEL)
ASTM F1471-93(2001) Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System
ASTM E2524-22 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
ASTM E2524-08(2013) Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
ASTM D2187-17 Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins
ASTM C1282-94 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-00 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-00(2006) Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-08 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM D5296-05 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM C1845-16 Standard Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM E2371-13 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM E2371-21 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM E2371-21a Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM D7614-20 Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements
ASTM E2594-20 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based)

Japanese Industrial Standards Committee (JISC), Separation of energetic particles

JIS Z 8826:2005 Particle size analysis -- Photon correlation spectroscopy

CZ-CSN, Separation of energetic particles

CSN 64 0907-1989 Plastics. Ion exchangers. Distribution and determination size of particles

Group Standards of the People's Republic of China, Separation of energetic particles

T/ZZAS 001-2018 Test method for electrical performance of high power lithium-ion battery
T/CIET 125-2023 Technical requirements for high performance extremely thin electrolytic copper foil for lithium ion batteries
T/CIET 222-2023 Technical requirements for high-performance ultra-thin electrolytic copper foil for lithium-ion batteries
T/CAMDI 016-2018 Quality management specification for the production of polyvinyl chloride pellets for medical polymer products
T/GHDQ 4-2017 Performance requirements and test methods of Lithium-ion battery pack for electric vehicles in frigid regions
T/SPSTS 002.2-2018 Performance evaluation of fiber-shaped energy storage devices—Part 2: Special requirements: Fiber-shaped lithium-ion batteries
T/SSPI 002-2021 Fast and intuitive test method of mildew resistance properties of macromolecular material products
T/ESD 3012-2023 Antistatic performance requirements for thermoplastic intrinsically static dissipative polymer materials

Hunan Provincial Standard of the People's Republic of China, Separation of energetic particles

DB43/T 2026-2021 Technical Regulations for Rice High Energy Heavy Ion Irradiation Mutation Breeding

Association Francaise de Normalisation, Separation of energetic particles

NF EN 17763:2022 Centrifugeuses - Centrifugeuses à combustible pour la marine - Détermination des performances de séparation des particules et du débit certifié (CFR) dans des conditions d'essai définies
NF EN ISO 2871-1:2010 Agents de surface - Détergents - Détermination de la teneur en matière active cationique - Partie 1 : matière active cationique à haute masse moléculaire
XP T16-401*XP CEN ISO/TS 19590:2019 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
NF M60-515-1*NF ISO 6980-1:2006 Nuclear energy - Reference beta-particle radiation - Part 1 : methods of production.
NF T73-320-1*NF EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1 : high-molecular-mass cationic-active matter.
NF T73-320:1994 Surface active agents. Detergents. Determination of cationic-active matter content. Part 1 : high-molecular-mass cationic-active matter.
XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
NF T70-363:1996 Energetic materials for defense. Physico-chemical analysis and properties. Freeness. Gravity method.
NF T70-328:1995 Energetic materials for defense. Physical-chemical analysis and properties. Grit particle of high explosives.
NF EN 15605:2010 Cuivre et alliages de cuivre - Analyse par spectrométrie d'émission optique avec source à plasma induit par haute fréquence
NF T70-334:2013 Energetic materials for defence - Physical-chemical analysis and properties - Particle size by dry mechanical screening of high explosives
NF T70-332:2013 Energetic materials for defence - Physical-chemical analysis and properties - Particle size by manual underwater screening of high explosives
NF T70-333:2013 Energetic materials for defence - Physical-chemical analysis and properties - Particle size by underwater mechanical screening of high explosives
NF T70-334:1995 Energetic materials for defense. Physical-chemical analysis and properties. Particle size by dry mechanical screening of high explosives
NF T70-333:1995 Energetic materials for defense. Physical-chemical analysis and properties. Particle size by underwater mechanical screening of high explosives.
NF T70-332:1995 Energetic materials for defense. Physical-chemical analysis and properties. Particle size by manual underwater screening of high explosives
NF M60-804-2:2004 Nuclear energy - Activity measurement of transuranium elements (Pu, Am, Cm) in water with alpha spectrometry - Part 2 : radionuclides separation with anionic and cationic resines and chromatographic extraction.
NF EN ISO 22184:2021 Lait et produits laitiers - Détermination de la teneur en sucre - Chromatographie d'échange d'anions haute performance couplée à la détection par ampérométrie pulsée (HPAEC-PAD)
NF X43-211-3*NF ISO 21438-3:2010 Workplace air - Determination of inorganic acids by ion chromatography - Part 3 : hydrofluoric acid and particulate fluorides
NF ISO 21438-3:2010 Air des lieux de travail - Détermination des acides inorganiques par chromatographie ionique - Partie 3 : acide fluorhydrique et fluorures particulaires
NF EN 17374:2020 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Détermination de la teneur en arsenic inorganique dans les aliments pour animaux, par CLHP avec échange d'anions et spectrométrie de masse à plasma induit par haute fréquence (I...
NF X43-265-3*NF ISO 15202-3:2005 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3 : analysis
NF EN 15591:2016 Essais sur matériaux céramiques et basiques - Détermination directe des fractions massiques d'impuretés dans les poudres et les granulés de carbure des silicium par spectroscopie d'émission optique à plasma induit par haute fréquence (ICP OES...
NF EN ISO 14720-2:2013 Essais des matières premières pour produits réfractaires - Dosage du soufre dans les matières premières non oxydantes sous la forme de poudre et de granulés - Partie 2 : spectrométrie d'émission optique avec plasma induit par haute fréquence ...
NF ISO 15202-3:2005 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif - Partie 3 : analyse
NF C58-985-1:2012 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1 : performance testing.
NF P18-650-6/A1:2006 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption.
NF C58-985-1*NF EN IEC 62660-1:2019 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1 : performance testing
NF EN IEC 62660-1:2019 Éléments d'accumulateurs lithium-ion pour la propulsion des véhicules routiers électriques - Partie 1 : essais de performance
XP CEN/TS 15754:2008 Aliments des animaux - Détermination de la teneur en sucre - Chromatographie d'échange d'anions haute performance couplée à la détection par ampérométrie pulsée (HPAEC-PAD)
NF ISO 15202-1:2020 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif - Partie 1 : prélèvement d'échantillons
NF EN ISO 26845:2008 Analyse chimique des matériaux réfractaires - Exigences générales pour les méthodes d'analyse chimique par voie humide, par spectrométrie d'absorption atomique (AAS) et par spectrométrie d'émission atomique avec plasma induit par haute fréq...
NF T66-017-2:2009 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2 : determination of fines mixing time of cationic bitumen emulsions.
NF T66-017-2*NF EN 13075-2:2016 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2 : determination of fines mixing time of cationic bituminous emulsions
NF X44-014-2:2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 2 : aerosol production, measuring equipment, particle counting statistics.

Korean Agency for Technology and Standards (KATS), Separation of energetic particles

KS D ISO 11653:2003 Steel－Determination of high cobalt content－Potentiometric titration method after separation by ion exchange
KS D ISO 11653-2003(2018) Steel－Determination of high cobalt content－Potentiometric titration method after separation by ion exchange
KS M ISO 2871-2007(2022) Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
KS M ISO 2871-2007(2017) Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
KS D 1674-2009 Methods for inductively coupled plasma spectrometric analysis of trace elements in pure gold
KS A ISO 6980-1-2009(2019) Nuclear energy－Reference beta-particle radiation－Part 1：Methods of production
KS A ISO 13318-2:2014 Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 2: Photocentrifuge method
KS A ISO 13318-2:2009 Determination of particle size distribution by centrifugal liquid sedimentation methods-Part 2:Photocentrifuge method
KS H ISO 11292:2007 Instant coffee－Determination of free and total carbohydrate contents－Method using high-performance anion-exchange chromatography
KS R ISO 12405-2:2016 Electrically propelled road vehicles ― Test specification for lithium-ion traction battery packs and systems ― Part 2: High-energy applications
KS L 1618-1-2013 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methods of properties of ceramic granules－Part 1：Size distribution of granules
KS F 2341-2007 Standard method for wet preparation of soil samples for particle size analysis and determination of soil constants
KS F 2341-1982 Standard method for wet preparation of soil samples for particle size analysis and determination of soil constants
KS I ISO 15202-1:2006 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry-Part 1:Sampling
KS I ISO 15202-1:2014 Workplace air — Determination of metals and metalloids in Workplace air — Determination of metals and metalloids in emission spectrometry — Part 1: Sampling
KS I ISO 21438-3-2012(2017) Workplace atmospheres－Determination of inorganic acids by ion chromatography－Part 3：Hydrofluoric acid and particulate fluorides
KS I ISO 15202-3:2005 Workplace air ― Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry ― Part 3: Analysis
KS M ISO 2871:2007 Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
KS I ISO 16740-2007(2017) Workplace air－Determination of hexavalent chromium in airborne particulate matter－Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
KS I ISO 15202-3:2021 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 3: Analysis
KS C IEC 62660-1:2011 Secondary lithium-ion cells for the propulsion of electric road vehicles-Part 1:Performance testing
KS I ISO 21438-3:2012 Workplace atmospheres－Determination of inorganic acids by ion chromatography－Part 3：Hydrofluoric acid and particulate fluorides
KS I ISO 15202-3-2005(2016) Workplace air ― Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry ― Part 3: Analysis
KS D ISO 17974-2011(2016) Surface chemical analysis－High-resolution Auger electron spectrometers－Calibration of energy scales for elemental and chemical-state analysis
KS C IEC 62660-1:2020 Secondary lithium-ion cells for the propulsion of electric road vehicles — Part 1: Performance testing

British Standards Institution (BSI), Separation of energetic particles

BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
BS EN 17763:2022 Centrifuges. Marine fuel centrifuges. Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
21/30441619 DC BS EN 17763. Centrifuges. Marine fuel centrifuges. Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
22/30406844 DC BS ISO 6980-1. Nuclear energy. Reference beta-particle radiation. Part 1. Methods of production
BS ISO 12405-2:2012 Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems. High-energy applications
PD CEN ISO/TS 19590:2019 Nanotechnologies. Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
BS EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - High-molecular-mass cationic-active matter
21/30403755 DC BS ISO 22762-6. Elastomeric seismic-protection isolators. Part 6. High-durability and high-performance specifications and test methods
BS ISO 15202-3:2004 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Analysis
BS ISO 24465:2023 Surface chemical analysis. Determination of the minimum detectability of surface plasmon resonance device
19/30376495 DC BS EN 17374. Animal feeding stuffs: Methods of sampling and analysis. Determination of inorganic arsenic in animal feed by anion-exchange HPLC-ICPMS
BS EN 13075-2:2009 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2:Determination of fines mixing time of cationic bitumen emulsions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Separation of energetic particles

GB/T 43092-2023 High-temperature performance test method for electrochemical performance testing of lithium-ion battery cathode materials
GB/T 328.21-2007 Test methods for building sheets for waterproofing Part 21: Plastic and rubber sheets for waterproofing-resistance to peeling of joints
GB/T 31467.2-2015 Lithium-ion traction battery pack and system for electric vehicles.Part 2:Test specification for high energy applications
GB/T 42732-2023 Size Distribution and Concentration Measurement of Inorganic Nanoparticles in Aqueous Phases in Nanotechnology by Single Particle Inductively Coupled Plasma Mass Spectrometry
GB/T 15812-1995 Flexible polymeric tubes for medical use--Physical perfomence test method
GB/T 25934.3-2010(英文版) "Methods for chemical analysis of high purity gold—Part 3：Ethyl ether extraction separation inductively coupled plasma atomic emission spectrometry—Determination of impurity elements contents"
GB/T 25934.1-2010(英文版) Methods for chemical analysis of high purity gold—Part 1: Ethyl acetate extraction separationinductively coupled plasmaatomic emission spectrometry—Determination of impurity elements contents
GB/T 13293.12-1991 Higher purity copper cathode.Determination of silver content.Separation and preconcentration with sulfhydryl cotton-flame atomic absorption spectrometric method
GB/T 29731-2013 Surface chemical analysis.High-resolution Auger electron spectrometers.Calibration of energy scales for elemental and chemical-state analysis

Jilin Provincial Standard of the People's Republic of China, Separation of energetic particles

DB22/T 3529-2023 Technical regulations for high-energy heavy ion beam radiation mutagenesis breeding of northern japonica rice

Professional Standard - Commodity Inspection, Separation of energetic particles

SN/T 3121-2012 Determination of high cobalt content in Steel.Potentiometric titration method after separation by ion exchange
SN/T 2259-2009 Determination of chemical components in high purity copper cathode.Inductively coupled plasma atomic emission spectrometry
SN/T 2558.2-2011 Import and Export Functional Textile Inspection Method Part 2: Negative Ion Content
SN/T 2597-2010 Determination of lead,cadmium,chromium,arsenic,antimony,germanium migration quantity in polymer for food contact materials.Inductively coupled plasma atomic emission spectometry method

International Organization for Standardization (ISO), Separation of energetic particles

ISO 6980-1:2006 Nuclear energy - Reference beta-particle radiation - Part 1: Methods of production
ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
ISO 2871-1:1988 Surface active agents; detergents; determination of cationic-active matter content; part 1: high-molecular-mass cationic-active matter
ISO 6980-1:2022 Nuclear energy — Reference beta-particle radiation — Part 1: Methods of production
ISO/DIS 6980-1:2022 Nuclear energy — Reference beta-particle radiation — Part 1: Methods of production
ISO/FDIS 6980-1:2011 Nuclear energy — Reference beta-particle radiation — Part 1: Methods of production
ISO 11292:1995 Instant coffee - Determination of free and total carbohydrate contents - Method using high-performance anion-exchange chromatography
ISO/TS 19590:2017 Nanotechnologies — Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
ISO 12405-2:2012 Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 2: High-energy applications
ISO 16014-4:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
ISO 16014-4:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
ISO 22762-6:2022 Elastomeric seismic-protection isolators — Part 6: High-durability and high-performance specifications and test methods
ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for conductivity measurement of ion-conductive fine ceramics - Part 1: Oxide-ion-conducting solid electrolytes
ISO 16014-3:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 16014-3:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 21438-3:2010 Workplace atmospheres - Determination of inorganic acids by ion chromatography - Part 3: Hydrofluoric acid and particulate fluorides
ISO 15202-1:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
ISO 15202-1:2000 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
ISO 15202-3:2004 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis
ISO 29463-2:2011 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics
ISO/TS 23366:2023 Nanotechnologies — Performance evaluation requirements for quantifying biomolecules using fluorescent nanoparticles in immunohistochemistry
ISO 29463-1:2011 High-efficiency filters and filter media for removing particles in air - Part 1: Classification, performance testing and marking
ISO 29463-1:2017 High efficiency filters and filter media for removing particles from air - Part 1: Classification, performance, testing and marking
ISO 14135-2:2014 Optics and photonics - Specifications for telescopic sights - Part 2: High-performance instruments
ISO/CD 29463-1:2023 High efficiency filters and filter media for removing particles from air — Part 1: Classification, performance, testing and marking
ISO/DIS 29463-1:2023 High efficiency filters and filter media for removing particles from air — Part 1: Classification, performance, testing and marking

Standard Association of Australia （SAA）, Separation of energetic particles

AS 4260:1997 High efficiency particulate air (HEPA) filters - Classification, construction and performance
AS 4260.1(Int):1994 High efficiency particulate air (HEPA) filters part 1: Performance and construction
AS/NZS 3580.9.15:2014

VN-TCVN, Separation of energetic particles

TCVN 7033-2002 Instant coffee.Determination of free and total carbohydrate contents.Method using high-performance anion-exchange chromatography
TCVN 7759-2008 Distillate Fuels.Determination of free water and particulate contamination (Visual inspection procedures)

TH-TISI, Separation of energetic particles

TIS 1762.1-1999 Surface active agents.detergents.determination of cationic-active matter content.part 1: high-molecular-mass cationic-active matter

European Committee for Standardization (CEN), Separation of energetic particles

EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
prEN 17763-2021 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
EN 17763:2022 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
EN 1822-2:1998 High Efficiency Air Filters (HEPA and ULPA) - Part 2: Aerosol Production, Measuring Equipment, Particle Counting Statistics
EN ISO 2871-1:1994 Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content - Part 1: High - Molecular-Mass Cationic-Active Matter (ISO 2871-1:1988)
EN 933-2:1996 Tests for Geometrical Properties of Aggregates - Part 2: Determination of Particle Size Distribution - Test Sieves, Nominal Size of Apertures

PL-PKN, Separation of energetic particles

PN C04860-10-1991 Ion exchange resins. Testing methods. Determination of the total strong acidic and weak acidic exchange capacitias of cationites
PN C04860-05-1991 ?on exchange resins Testing methods Determination of granulometric composition (mesh analysis)

Danish Standards Foundation, Separation of energetic particles

DS/EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
DS/ISO 12405-2:2012 Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 2: High-energy applications
DS/EN ISO 14720-2:2013 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in
DS/EN 62660-1:2011 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing
DS/EN 1822-2:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
DS/ISO 15202-3:2007 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis

CEN - European Committee for Standardization, Separation of energetic particles

CEN ISO/TS 19590:2019 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production@ measuring equipment and particle-counting statistics

国家市场监督管理总局、中国国家标准化管理委员会, Separation of energetic particles

GB/T 35099-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air
GB/T 40260-2021 Test method for determining gas permeability of polymer membrane materials

AT-ON, Separation of energetic particles

OENORM EN 17763-2021 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions

ES-UNE, Separation of energetic particles

UNE-EN 17763:2023 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
UNE-EN IEC 62660-1:2019 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing (Endorsed by Asociación Española de Normalización in March of 2019.)

Indonesia Standards, Separation of energetic particles

SNI ISO 6980-1:2014

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Separation of energetic particles

GJB 5384.22-2005 Test methods of performance for pyrotechnic composition Part 21: Concentration determination of solid smoke particles quantities Electron microscope method
GJB 5384.23-2005 Test methods of performance for pyrotechnic composition Part 23: Determination of particles size distribution for solid smoke particles Electron microscope method

Lithuanian Standards Office , Separation of energetic particles

LST EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)
LST EN ISO 14720-2:2013 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in
LST EN 1822-2-2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics

AENOR, Separation of energetic particles

UNE-EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)
UNE-EN 62660-1:2011 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing
UNE-EN 1822-2:2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics

KR-KS, Separation of energetic particles

KS R ISO 12405-2-2016 Electrically propelled road vehicles ― Test specification for lithium-ion traction battery packs and systems ― Part 2: High-energy applications
KS I ISO 21438-3-2022 Workplace atmospheres Determination of inorganic acids by ion chromatography Part 3: Hydrofluoric acid and particulate fluorides
KS I ISO 15202-3-2021 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 3: Analysis
KS I ISO 16740-2022 Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
KS C IEC 62660-1-2020 Secondary lithium-ion cells for the propulsion of electric road vehicles — Part 1: Performance testing

工业和信息化部, Separation of energetic particles

YS/T 1065.2-2015 Methods for determination of physical properties of zeolites Part 2: Determination of particle size Centrifugal sedimentation method
YS/T 252.6-2020 Methods for chemical analysis of high nickel matte part 6: Determination of lead, zinc and arsenic content by inductively coupled plasma atomic emission spectrometry
YS/T 474-2021 Chemical Analysis Methods for High Purity Gallium Determination of Trace Elements Inductively Coupled Plasma Mass Spectrometry

Professional Standard - Electron, Separation of energetic particles

SJ/T 11812.1-2022 Performance specifications for lithium-ion cells and batteries for distributed energy storage Part 1: Home energy storage
SJ/T 11812.2-2022 Performance specifications for lithium-ion cells and battery packs for distributed energy storage Part 2: Road traffic and landscape lighting facilities
SJ 20713-1998 Method for the determination of 12 species of impurities including copper,maganese,magnesium,vanadium,titanium in high-purity gallium used for gallium arsenide by ICP spectrometry

Professional Standard - Agriculture, Separation of energetic particles

SN/T 5580-2023 Determination of Gold Content in Copper Concentrate Enrichment and Separation of Foam-based Granular Activated Carbon-Inductively Coupled Plasma Emission Spectrometry

Society of Automotive Engineers (SAE), Separation of energetic particles

SAE AMS3603A-2002 (R) Protective Film, High Performance, Polymeric Pressure Sensitive Adhesive, for Aircraft Exterior Applications

US-CFR-file, Separation of energetic particles

CFR 7-1709.102-2014 Agriculture. Part1709:Assistance to high energy cost communities. SubpartB:RUS high cost energy grant program. Section1709.102:Policy.

ETSI - European Telecommunications Standards Institute, Separation of energetic particles

TS 101 952-1-2-2002 Access Network xDSL Transmission Filters; Part 1: ADSL Splitters for European Deployment; Sub-Part 2: Specification of the High Pass Part of ADSL/POTS Splitters (V1.1.1)
TR 101 953-1-2-2003 Access network xDSL transmission filters; Part 1: ADSL splitters for European deployment; Sub-part 2: Testing methods for High Pass part of ADSL/POTS splitters (V1.1.1)
TR 101 953-2-2-2004 Access network xDSL transmission filters; Part 2: VDSL splitters for European deployment; Sub-part 2: Specification of Testing methods for high pass part of VDSL/POTS splitters (V1.1.1)

GM North America, Separation of energetic particles

GM GM6419M-2001 Performance Requirements of Ultra High Modecular Weight Polyethlene (UHMW PE) Tape

Beijing Provincial Standard of the People's Republic of China, Separation of energetic particles

DB11/T 1283-2015 Energy Consumption Quotas per Unit Product of Polymer Waterproof Membrane

International Electrotechnical Commission (IEC), Separation of energetic particles

IEC TS 62686-1:2015 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and disc
IEC TS 62686-1:2012 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and discrete semiconductors
IEC 62660-1:2018 RLV Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing
IEC 62660-1:2018 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing

Professional Standard - Non-ferrous Metal, Separation of energetic particles

YS/T 1065.4-2015 Methods for physical performance determination of zeolite.Part 4:Determination of non-ionic liquid-carrying capacity
YS/T 34.1-2011 Method for chemical analysis of the high-purity arsenic.Inductive coupling plasma mass spectrum(ICP-MS)for determinating the concentration of elements in the high-purity arsenic
YS/T 474-2005 Determination of trace elements in high-purity gallium -ICP-MS analytical method
YS/T 244.9-2008 Chemical analysis methods of high purity aluminum.Part 9: Determination of trace impurities in high purity aluminumby inductively coupled mass spectrometry

Professional Standard-Ships, Separation of energetic particles

CB/T 4390.9-2013 Methods for chemical analysis of high manganese aluminum bronze for propeller.Part9:The inductively coupled plasma atomic emission spectrometric method

GOSTR, Separation of energetic particles

GOST R IEC 62660-1-2020 Secondary lithium-ion cells for the propulsion of electric road vehicles. Part 1. Performance testing

Professional Standard - Aviation, Separation of energetic particles

HB 5220.41-1995 Chemical Analysis Method of High Temperature Alloy Chloroborate Ion Selective Electrode Method for Determination of Boron Content
HB 5220.41-2008 Methods for chemical analysis of superalloys. Part 41: Determination of boron content by fluoroborate ion selective electrode method

Association of German Mechanical Engineers, Separation of energetic particles

VDI 2268 Blatt 2-1990 Chemical analysis of particulate matter; determination of arsenic, antimony and selenium in dust emissions by atomic absorption spectrometry after separation of their volatile hydrides
VDI 3497 Blatt 4-1991 Determination of particulate anions in ambient air; analysis of chloride, nitrate, and sulphate by ion chromatography using single-column-technique after aerosol sampling on PTFE-filters
VDI 3497 Blatt 3-1988 Determination of particulate anions in ambient air; analysis of chloride, nitrate, and sulfate by ion chromatography using suppressor technique after aerosol sampling on PTFE-filters

European Committee for Electrotechnical Standardization（CENELEC）, Separation of energetic particles

EN 62660-1:2011 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing

CENELEC - European Committee for Electrotechnical Standardization, Separation of energetic particles

EN IEC 62660-1:2019 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing

未注明发布机构, Separation of energetic particles

BS ISO 17974:2002(2010) Surface chemical analysis — High - resolution Auger electron spectrometers — Calibration of energy scales for elemental and chemical - state analysis

American National Standards Institute （ANSI), Separation of energetic particles

ANSI/ASTM D5296:1997 Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography, Test Method of (08.03)
ANSI N42.31-2003 Measurement Procedures for Resolution and Efficiency of Wide-Bandgap Semiconductor Detectors of Ionizing Radiation