ZH
RU
ES

Energetic Particles 2

Energetic Particles 2, Total:285 items.

In the international standard classification, Energetic Particles 2 involves: Geology. Meteorology. Hydrology, Radiation measurements, Nuclear energy engineering, Ventilators. Fans. Air-conditioners, Air quality, Radiation protection, Particle size analysis. Sieving, Farming and forestry, Installations in buildings, Plastics, Analytical chemistry, Cellular materials, Rubber and plastics products, Ceramics, Microbiology, Milk and milk products, Semiconducting materials, Optical equipment, Medical equipment, Products of the chemical industry, Non-destructive testing, Data storage devices, Wind turbine systems and other alternative sources of energy, Information technology (IT) in general, Construction materials, Fasteners, Tea. Coffee. Cocoa, Interface and interconnection equipment, Medical sciences and health care facilities in general, Soil quality. Pedology, Water quality, Transport, Applications of information technology, Optics and optical measurements, Furniture, Equipment for children, Coatings and related processes used in aerospace industry, Space systems and operations, Test conditions and procedures in general, Physics. Chemistry, Road vehicle systems, Electric road vehicles, Energy and heat transfer engineering in general, Power transmission and distribution networks, Electrical accessories, Commercial vehicles, Protection of and in buildings, Company organization and management, Electronic components in general, Aerospace electric equipment and systems, Wastes, Powder metallurgy, Products of the textile industry, Insulation, Reinforced plastics, Non-ferrous metals, Paint ingredients.

中国气象局, Energetic Particles 2

QX/T 546-2020 Terminology for space high-energy particle radiation effects

RU-GOST R, Energetic Particles 2

GOST R 25645.165-2001 Solar energetic particles. Probabilistic model for proton fluxes
GOST R 50517-1993 Polymer membranes. The method of determination of weight fraction of latex particles not permeated through microfiltration membranes
GOST R EN 1822-2-2012 High efficiency air filters (EPA, HEPA and ULPA). Part 2. Aerosol production, measuring equipment, particle counting statistics
GOST R ISO 12405-2-2014 Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems. Part 2. High-energy applications
GOST R 58022-2017 Polymer composite crossarms. Method for determination of flexural mechanical properties

Professional Standard - Building Materials, Energetic Particles 2

JC/T 2018-2010 Thallium doped cesium iodide crystal for high-energy particles detection

Professional Standard - Nuclear Industry, Energetic Particles 2

EJ/T 368-1989 HEPA filter performance test method
EJ 915-1994 Nuclear-grade sub-high-efficiency air particle filter
EJ/T 367-1989 High-efficiency air particle filter technical conditions

Underwriters Laboratories (UL), Energetic Particles 2

UL 586-1990 High-efficiency, particulate, air filter units
UL 586-1996 High-efficiency, particulate, air filter units

American Society for Testing and Materials (ASTM), Energetic Particles 2

ASTM F1471-93(2001) Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System
ASTM E2524-22 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
ASTM E2524-08(2013) Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
ASTM E821-16 Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
ASTM E821-96(2003) Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
ASTM E821-96 Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
ASTM F1471-09 Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System
ASTM D1782-17 Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
ASTM D1782-95(2007) Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
ASTM D1782-95(2001) Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
ASTM D1782-95(2009) Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
ASTM E821-96(2009) Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
ASTM E821-16(2023) Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
ASTM F1471-93 Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System
ASTM E3084-17(2022)e1 Standard Practice for Characterizing Particle Irradiations of Materials in Terms of Non-Ionizing Energy Loss (NIEL)
ASTM D5296-05 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM E3084-17 Standard Practice for Characterizing Particle Irradiations of Materials in Terms of Non-Ionizing Energy Loss (NIEL)
ASTM C1471-00 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
ASTM D6650-01 Standard Test Method for Determining the Dynamic Wiping Efficiency, Wet Particle Removal Ability, and Fabric Particle Contribution of Nonwoven Fabrics Used in Cleanrooms
ASTM F50-92(1996) Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM F50-92(2001)e1 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles

Japanese Industrial Standards Committee (JISC), Energetic Particles 2

JIS Z 8826:2005 Particle size analysis -- Photon correlation spectroscopy
JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
JIS Z 2320-2:2007 Non-destructive testing -- Magnetic particle testing -- Part 2: Detection media
JIS K 3850-2:2000 Measuring method for airborne fibrous particles -- Part 2: Direct-transfer transmission electron microscopy method
JIS Q 9004 ERRATUM 2:2001 Quality management systems -- Guidelines for performance improvements (Erratum 2)
JIS K 6936-2:2007 Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties

Military Standard of the People's Republic of China-General Armament Department, Energetic Particles 2

GJB 10098-2021 Specifications for mid-energy particle detectors in space
GJB 5108-2004 Specifications for space high-energy proton and heavy ion detectors
GJB 5108A-2019 Specifications for space high-energy proton and heavy ion detectors
GJB 8684.22-2015 Test methods for pyrotechnic properties - Part 22: Determination of smoke solid particle number concentration by electron microscopy
GJB 5107A-2019 Specifications for space high-energy electron detectors
GJB 5107-2004 Specifications for space high-energy electron detectors
GJB 8684.23-2015 Test methods for pyrotechnic properties - Part 23: Determination of particle size distribution of smoke solid particles by electron microscopy
GJB 7367-2011 Methodology of measurement for high-energy laser beam quality factor β

Shanxi Provincial Standard of the People's Republic of China, Energetic Particles 2

DB14/T 2742-2023 Sorghum Seed Pellet Production Technical Regulations
DB14/ 1062-2015 Comprehensive energy consumption limit per unit product of granulated blast furnace slag powder used in cement and concrete

International Organization for Standardization (ISO), Energetic Particles 2

ISO 21501-2:2007 Determination of particle size distribution - Single particle light interaction methods - Part 2: Light scattering liquid-borne particle counter
ISO 21501-2:2019 Determination of particle size distribution — Single particle light interaction methods — Part 2: Light scattering liquid-borne particle counter
ISO 6980-1:2006 Nuclear energy - Reference beta-particle radiation - Part 1: Methods of production
ISO 29463-2:2011 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics
ISO 14135-2:2014 Optics and photonics - Specifications for telescopic sights - Part 2: High-performance instruments
ISO 6980-1:2022 Nuclear energy — Reference beta-particle radiation — Part 1: Methods of production
ISO/DIS 6980-1:2022 Nuclear energy — Reference beta-particle radiation — Part 1: Methods of production
ISO/FDIS 6980-1:2011 Nuclear energy — Reference beta-particle radiation — Part 1: Methods of production
ISO 14135-2:2017 Optics and photonics — Specifications for telescopic sights — Part 2: High-performance instruments
ISO 14135-2:2021 Optics and photonics — Specifications for telescopic sights — Part 2: High-performance instruments
ISO 9934-2:2002 Non-destructive testing - Magnetic particle testing - Part 2: Detection media
ISO 9934-2:2015 Non-destructive testing - Magnetic particle testing - Part 2: Detection media
ISO 6980-2:2004 Nuclear energy - Reference beta-particle radiation - Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
ISO/DIS 6980-2:2022 Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
ISO/FDIS 6980-2:2011 Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
ISO 6980-2:2022 Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
ISO 11884-2:2007 Optics and photonics - Minimum requirements for stereomicroscopes - Part 2: High performance microscopes
ISO 20998-2:2022 Measurement and characterization of particles by acoustic methods — Part 2: Linear theory
ISO 16014-4:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
ISO 16014-4:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
ISO 17520:2016 Space environment (natural and artificial) - Cosmic ray and solar energetic particle penetration inward the magnetosphere - Method of determination of the effective vertical cut-off rigidity
ISO/DIS 17520:2023 Space environment (natural and artificial) — Cosmic ray and solar energetic particle penetration inward the magnetosphere — Method of determination of the effective vertical cut-off rigidity
ISO/TS 23366:2023 Nanotechnologies — Performance evaluation requirements for quantifying biomolecules using fluorescent nanoparticles in immunohistochemistry
ISO 12405-2:2012 Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 2: High-energy applications
ISO 20998-2:2013 Measurement and characterization of particles by acoustic methods.Part 2: Guidelines for linear theory
ISO 16014-3:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 16014-3:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 14644-2:2015 Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Energetic Particles 2

GB/T 6167.2-1985 Methods for testing the performance of dust particle counter--Particle concentration
GB/T 6167-2007 Methods for testing the performance of airborne particle counter
GB/T 14853.2-2006 Rubber compounding ingredients.Pelletized carbon black.Part 2:Determination of fines content and pellet attrition
GB/T 6167.1-1985 Methods for testing the performance of dust particle counter--Calibration for sizing particle
GB/T 15812-1995 Flexible polymeric tubes for medical use--Physical perfomence test method
GB 18173.2-2000 Polymer water-proof materials Part 2:Waterstop
GB 18173.2-2014 Polymer water-proof materials.Part 2:waterstop
GB/T 31467.2-2015 Lithium-ion traction battery pack and system for electric vehicles.Part 2:Test specification for high energy applications
GB/T 43092-2023 High-temperature performance test method for electrochemical performance testing of lithium-ion battery cathode materials
GB/T 8287.2-1999 High voltage post insulators of ceramic material. Part 2: Dimensions and characteristics
GB/T 21461.2-2008 Plastics.Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials.Part 2:Preparation of test specimens and determination of properties

British Standards Institution (BSI), Energetic Particles 2

19/30385915 DC BS ISO 21501-2. Determination of particle size distribution. Single particle light interaction methods. Part 2. Light scattering liquid-borne particle counter
BS ISO 6980-1:2006 Nuclear energy - Reference beta-particle radiation - Methods of production
BS ISO 6980-1:2022 Tracked Changes. Nuclear energy. Reference beta-particle radiation. Methods of production
BS ISO 16362:2005 Ambient air - Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography
20/30396829 DC BS ISO 14135-2. Optics and photonics. Specifications for telescopic sights. Part 2. High-performance instruments
PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
22/30406847 DC BS ISO 6980-2. Nuclear energy. Reference beta-particle radiation. Part 2. Calibration fundamentals related to basic quantities characterizing the radiation field
23/30468040 DC BS EN 15167-2. Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2. Assessment and verification of constancy of performance
BS EN 933-4:2000 Tests for geometrical properties of aggregates - Determination of particle shape - Shape index
22/30406844 DC BS ISO 6980-1. Nuclear energy. Reference beta-particle radiation. Part 1. Methods of production
BS EN 13443-2:2005 Water conditioning equipment inside buildings — Mechanical filters — Part 2: Particle rating 1 4m to less than 80 4m — Requirements for performance, safety and testing
BS EN 16062:2011 Intelligent transport systems. eSafety. eCall high level application requirements (HLAP)
BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
DD IEC/TS 62396-4:2008 Process management for avionics. Atmospheric radiation effects - Guidelines for designing with high voltage aircraft electronics and potential single event effects
DD IEC/PAS 62396-4:2007 Process management for avionics. Atmospheric radiation effects - Guidelines for designing with high voltage aircraft electronics and potential single event effects
BS EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
BS ISO 17520:2016 Space environment (natural and artificial). Cosmic ray and solar energetic particle penetration inward the magnetosphere. Method of determination of the effective vertical cut-off rigidity
BS ISO 14135-2:2014 Optics and photonics. Specifications for telescopic sights. High-performance instruments
BS ISO 14135-2:2017 Optics and photonics. Specifications for telescopic sights. High-performance instruments
BS ISO 14135-2:2021 Optics and photonics. Specifications for telescopic sights. High-performance instruments
BS PD CEN/TR 16013-2:2010 Workplace exposure — Guide for the use of direct-reading instruments for aerosol monitoring Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
23/30432825 DC BS ISO 17520. Space environment (natural and artificial). Cosmic ray and solar energetic particle penetration inward the magnetosphere. Method of determination of the effective vertical cut-off rigidity
BS ISO 6980-2:2004 Nuclear energy - Reference beta-particle radiation - Calibration fundamentals related to basic quantities characterizing the radiation field
BS ISO 6980-2:2022 Nuclear energy. Reference beta-particle radiation - Calibration fundamentals related to basic quantities characterizing the radiation field
19/30387275 DC BS EN ISO 21304-2. Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties
BS IEC 62977-3-4:2023 Electronic displays - Evaluation of optical performances. High dynamic range displays

Group Standards of the People's Republic of China, Energetic Particles 2

T/SHPTA 049-2023 High impact reinforced polypropylene particles with glass fiber
T/SHPTA 048-2023 Halogen-free flame retardant glass fiber enhanced high-temperature nylon plastic particles
T/SDIE 3-2017 UHF electronic tag performance test specification
T/CAMDI 016-2018 Quality management specification for the production of polyvinyl chloride pellets for medical polymer products
T/ZZAS 001-2018 Test method for electrical performance of high power lithium-ion battery
T/CSTM 00863-2023 Polymeric additive- Tri（2-hydroxyethyl）isocyanurate
T/CAMIE 01-2022 Technical requirements for intelligent disassembly of high-value electronic components of waste circuit board
T/CHIA 7.2-2018 Basic data set of hypertension department electronic medical record – part 2：Hypertension outpatient and emergency medical record
T/CIET 125-2023 Technical requirements for high performance extremely thin electrolytic copper foil for lithium ion batteries
T/CIET 222-2023 Technical requirements for high-performance ultra-thin electrolytic copper foil for lithium-ion batteries

Korean Agency for Technology and Standards (KATS), Energetic Particles 2

KS L 1618-2-2013 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methods of properties of ceramic granules－Part 2：Bulk density
KS A ISO 6980-1-2009(2019) Nuclear energy－Reference beta-particle radiation－Part 1：Methods of production
KS L 1618-2013(2018) Fine ceramics(advanced ceramics, advanced technical ceramics)－ Test methods of properties of ceramic granules
KS B ISO 9934-2:2007 Non-destructive testing－Magnetic particle testing－Part 2：Detection media
KS A ISO 6980-2:2016 Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
KS A ISO 6980-2-2016(2021) Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
KS L 1618-1-2013 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methods of properties of ceramic granules－Part 1：Size distribution of granules
KS B ISO 11884-2-2011(2016) Optics and photonics－Minimum requirements for stereomicroscope－Part 2：High performance microscopes
KS B ISO 11884-2-2011(2021) Optics and photonics－Minimum requirements for stereomicroscope－Part 2：High performance microscopes
KS F 2341-2007 Standard method for wet preparation of soil samples for particle size analysis and determination of soil constants
KS F 2341-1982 Standard method for wet preparation of soil samples for particle size analysis and determination of soil constants
KS B ISO 11884-2:2011 Optics and photonics－Minimum requirements for stereomicroscope－Part 2：High performance microscopes
KS R ISO 12405-2:2016 Electrically propelled road vehicles ― Test specification for lithium-ion traction battery packs and systems ― Part 2: High-energy applications
KS L 1618-4-2013 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methods of properties of ceramic granules－Part 4：Flowability
KS B ISO 29463-2:2021 High-efficiency filters and filter media for removing particles in air — Part 2: Aerosol production, measuring equipment and particle-counting statistics
KS M ISO 11542-2-2011(2021) Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 11542-2-2011(2016) Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M 1083-2019 Determination of tris(2-chloroethyl) phosphate(TCEP) in polymer materials

Association Francaise de Normalisation, Energetic Particles 2

NF V04-040-2:1997 Milk. Enumeration of somatic cells. Part 2 : electronic particle counter method.
NF M60-515-1*NF ISO 6980-1:2006 Nuclear energy - Reference beta-particle radiation - Part 1 : methods of production.
NF X44-014-2:2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 2 : aerosol production, measuring equipment, particle counting statistics.
NF M60-515-2*NF ISO 6980-2:2005 Nuclear energy - Reference beta-particle radiations - Part 2 : calibration fundamentals related to basic quantities characterizing the radiation field
NF T70-328:1995 Energetic materials for defense. Physical-chemical analysis and properties. Grit particle of high explosives.
FD X43-711-2*FD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2 : evaluating airborne particle concentrations using Optical Particle Counters
NF T70-334:2013 Energetic materials for defence - Physical-chemical analysis and properties - Particle size by dry mechanical screening of high explosives
NF T70-332:2013 Energetic materials for defence - Physical-chemical analysis and properties - Particle size by manual underwater screening of high explosives
NF T70-333:2013 Energetic materials for defence - Physical-chemical analysis and properties - Particle size by underwater mechanical screening of high explosives
NF T70-334:1995 Energetic materials for defense. Physical-chemical analysis and properties. Particle size by dry mechanical screening of high explosives
NF T70-333:1995 Energetic materials for defense. Physical-chemical analysis and properties. Particle size by underwater mechanical screening of high explosives.
NF T70-332:1995 Energetic materials for defense. Physical-chemical analysis and properties. Particle size by manual underwater screening of high explosives
NF S54-007-2:2006 Children's high chair - Part 2 : test methods.
NF T70-708:2002 Energetic materials for defense - Performances - Detonation velocity - Measurement with a streak camera and a cylindrical pellet.
NF P99-258:2011 Intelligent transport systems - ESafety - ECall high level application requirements (HLAP).
NF X43-283-2*NF EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2 : laboratory performance test based on determination of sampling efficiency
FD CEN/TR 16013-2:2010 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 2 : évaluation des concentrations de particules en suspension dans l'air à l'aide de compteurs optiques de particules
NF T70-701:1995 Energetic materials for defense. Performances. Estimation of critical diameter by the tiered pellets method.
NF EN 15167-2:2006 Laitier granulé de haut-fourneau moulu pour utilisation dans le béton, mortier et coulis - Partie 2 : évaluation de la conformité
NF P18-650-6/A1:2006 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption.
NF EN ISO 29463-2:2018 Filtres à haut rendement et filtres pour l'élimination des particules dans l'air - Partie 2 : production d'aérosol, équipement de mesure et statistique de comptage de particules
NF X44-014-2*NF EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air - Part 2 : aerosol production, measuring equipment and particle-counting statistics

German Institute for Standardization, Energetic Particles 2

DIN 50452-2:2009 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 2: Determination of particles by optical particle counters
DIN ISO 14135-2:2018 Optics and photonics - Specifications for telescopic sights - Part 2: High-performance instruments (ISO 14135-2:2017)
DIN ISO 14135-2:2015 Optics and photonics - Specifications for telescopic sights - Part 2: High-performance instruments (ISO 14135-2:2014)
DIN EN ISO 9934-2:2003 Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2002); German version EN ISO 9934-2:2002
DIN 6800-2:2020-08 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 2: Ionization chamber dosimetry of high energy photon and electron radiation
DIN EN 15167-2:2023-04 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Assessment and verification of constancy of performance; German and English version prEN 15167-2:2023 / Note: Date of issue 2023-03-17*Intended as replacement for DIN ...
DIN EN 1367-2:2010 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test; German version EN 1367-2:2009
DIN EN 15167-2:2023 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Assessment and verification of constancy of performance; German and English version prEN 15167-2:2023
DIN 16783-2:1991 Ultra-high molecular weight polyethylene (PE-UHMW) moulding materials; preparation of test specimens and determination of properties
DIN 50452-2:1991 Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters
DIN ISO 14135-2:2017 Optics and photonics - Specifications for telescopic sights - Part 2: High-performance instruments (ISO 14135-2:2017); Text in German and English
DIN EN ISO 9934-2:2015 Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015); German version EN ISO 9934-2:2015
DIN V ENV 14312:2002 Advanced technical ceramics - Ceramic powders - Determination of flowability behaviour of ceramic granule; German version ENV 14312:2002
DIN IEC/TS 62607-3-2:2018 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC/TS 62607-3-2:2017)
DIN EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency; German version EN 13205-2:2014
DIN EN ISO 29463-2:2019 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011)
DIN EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011); German and English version prEN ISO 29463-2:2018
DIN 46266-2:1988 High-voltage feed-through terminals; bushing studs
DIN IEC/TS 62607-3-2:2018-09*DIN SPEC 42607-3-2:2018-09 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC/TS 62607-3-2:2017)
DIN EN ISO 14644-2:2016 Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration (ISO 14644-2:2015); German version EN ISO 14644-2:2015
DIN EN 15167-2:2006-12 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Confomity evaluation; German version EN 15167-2:2006
DIN EN ISO 29463-2:2019-05 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011); German version EN ISO 29463-2:2018

Standard Association of Australia （SAA）, Energetic Particles 2

AS 4260:1997 High efficiency particulate air (HEPA) filters - Classification, construction and performance
AS 4260.1(Int):1994 High efficiency particulate air (HEPA) filters part 1: Performance and construction
AS 4260.2(Int):1994 High efficiency particulate air (HEPA) filters part 2: Methods of test
AS 4233.2:2013 High pressure water jetting systems, Part 2: Construction and performance

CEN - European Committee for Standardization, Energetic Particles 2

EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production@ measuring equipment and particle-counting statistics
EN 1367-2:1998 Tests for Thermal and Weathering Properties of Aggregates - Part 2: Magnesium Sulfate Test

European Committee for Standardization (CEN), Energetic Particles 2

EN 1822-2:1998 High Efficiency Air Filters (HEPA and ULPA) - Part 2: Aerosol Production, Measuring Equipment, Particle Counting Statistics
EN 13205:2001 Workplace Atmospheres - Assessment of Performance of Instruments for Measurement of Airborne Particle Concentrations
EN ISO 9934-2:2002 Non-Destructive Testing - Magnetic Particle Testing - Part 2: Detection media ISO 9934-2:2002
EN 1367-2:2009 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test
EN 933-2:1996 Tests for Geometrical Properties of Aggregates - Part 2: Determination of Particle Size Distribution - Test Sieves, Nominal Size of Apertures
prEN 15167-2 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Assessment and verification of constancy of performance
PD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
EN 14988-2:2006 Children's high chairs - Part 2: Test methods (Incorporates Amendment A1: 2012)
EN ISO 11542-2:1998 Plastics - Ultra-High-Molecular-Weight Polyethylene (PE-UHMW) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 11542-2:1998
EN ISO 14644-2:2015 Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Energetic Particles 2

GJB 5384.22-2005 Test methods of performance for pyrotechnic composition Part 21: Concentration determination of solid smoke particles quantities Electron microscope method
GJB 5384.23-2005 Test methods of performance for pyrotechnic composition Part 23: Determination of particles size distribution for solid smoke particles Electron microscope method
GJB 6239.2-2008 Test method of impregnated activated carbon for military. Part 2: Particle size

Indonesia Standards, Energetic Particles 2

SNI ISO 6980-1:2014
SNI ISO 6980-2:2014
SNI 19-7117.2-2005 Exhaust gas emissions - Stationary source - Part 2: Determination of location and cross-points of particle test sampling

Danish Standards Foundation, Energetic Particles 2

DS/EN 1822-2:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
DS/CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DS/EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
DS/EN ISO 21304-2:2021 Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
DS/ISO 12405-2:2012 Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 2: High-energy applications
DS/ISO 21304-2:2021 Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
DS/ISO 10155/Corr.1:2002 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
DS/ISO 10155:1996 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications

Lithuanian Standards Office , Energetic Particles 2

LST EN 1822-2-2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
LST EN 13205-2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
LST EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
LST EN ISO 11542-2:2000 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998)
LST ISO 10155:2001 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications
LST EN ISO 11542-2:2000/AC:2008 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998/Cor 1:2007)

AENOR, Energetic Particles 2

UNE-EN 1822-2:2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
UNE 77219:1998 STACIONARY SOURCE EMISSIONS. AUTOMATED MONITORING OF MASS CONCENTRATIONS OF PARTICLES. PERFORMANCE CHARACTERISTICS, TEST METHODS AND SPECIFICATIONS.
UNE 83483-2:1998 EX ADDITIONS FOR CONCRETE. GROUND GRANULATED BLASTFURNACE SLAGS. PART 2: SUPPLY AND RECEPTION CONTROL.
UNE-EN ISO 11542-2:1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 11542-2:1998)

国家市场监督管理总局、中国国家标准化管理委员会, Energetic Particles 2

GB/T 35099-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air
GB/T 36533-2018 Determination of the chemical state of micro-iron in silicate—Auger electron spectroscopy
GB/T 40260-2021 Test method for determining gas permeability of polymer membrane materials
GB/T 31057.2-2018 Granular materials—Physical properties—Part 2: Determination of tap density

Professional Standard - Aerospace, Energetic Particles 2

QJ 1069-1986 Technical conditions of TR-2 high temperature putty

RO-ASRO, Energetic Particles 2

STAS 7727-1985 POLYGRANULAR STANDARD SAND FOR TESTING THE CEMENTS ON PLASTIC MORTARS

National Metrological Technical Specifications of the People's Republic of China, Energetic Particles 2

JJF 1026-1991 Absorbed Dose Determination in Photon and Electron Beams

Professional Standard - Chemical Industry, Energetic Particles 2

HG/T 2347.7-1992 Determination of particle size in γ·Fe(index 2)O(index 3)magnetic powder

KR-KS, Energetic Particles 2

KS B ISO 14135-2-2023 Optics and photonics — Specifications for telescopic sights — Part 2: High-performance instruments
KS A ISO 6980-2-2016 Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
KS R ISO 12405-2-2016 Electrically propelled road vehicles ― Test specification for lithium-ion traction battery packs and systems ― Part 2: High-energy applications
KS B ISO 29463-2-2021 High-efficiency filters and filter media for removing particles in air — Part 2: Aerosol production, measuring equipment and particle-counting statistics

GM Global, Energetic Particles 2

GMW 16843-2013 DEXRON High Performance Hydraulic Fluid Issue 2; English

American Society of Mechanical Engineers (ASME), Energetic Particles 2

ASME SEC II D SB PT 2-2003 Subpart 2 Physical Properties Tables

Aerospace Industries Association/ANSI Aerospace Standards, Energetic Particles 2

AIA/NAS NAS 1065-1978 Stud - High Temperature Electrical Terminal Block (Rev. 2)

Aerospace Industries Association, Energetic Particles 2

AIA NAS 1060-1994 Bus - High Temperature - Terminal Block (Rev. 2)
AIA NAS 1065-1978 (Inactive)Stud - High Temperature Electrical Terminal Block (Rev. 2)
AIA NAS 1062-1962 Strip - High Temperature Terminal Block Nut Insulating (Rev. 2) R(1989)

AIA/NAS - Aerospace Industries Association of America Inc., Energetic Particles 2

NAS1060-1994 Bus - High Temperature - Terminal Block (Rev 2)
NAS1064-1967 Terminal Block - Electrical@ High Temperature (Rev 2)
NAS1062-1962 Strip - High Temperature Terminal Block Nut Insulating (Rev 2)
NAS1065-1978 Stud - High Temperature Electrical Terminal Block (Rev 2)

Yunnan Provincial Standard of the People's Republic of China, Energetic Particles 2

DB5331/T 47.2-2023 Dehong Small Grain Coffee Comprehensive Technical Regulations Part 2: Seeds

Institute of Electrical and Electronics Engineers (IEEE), Energetic Particles 2

IEEE 1394B-2002 High-performance serial bus; Amendment 2

未注明发布机构, Energetic Particles 2

DIN EN 1822-2:1998 High efficiency particulate air filters (HEPA and ULPA) — Part 2: Aerosol production, measuring equipment, particle counting statistics

NATO - North Atlantic Treaty Organization, Energetic Particles 2

STANAG 3802-1985 Screwdriver Recesses (High Performance) (ED 2 AMD 5; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int. For addition

Professional Standard - Military and Civilian Products, Energetic Particles 2

WJ 2707.2-2008 Test methods for physical and chemical properties of cloud explosives Part 2: Particle size

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Energetic Particles 2

GB/T 34831-2017 Nanotechnologies—Electron microscopy imaging of noble metal nanoparticles—High angle annular dark field imaging method
GB/T 18173.2-2014 Polymer water-proof materials―Part 2: waterstop

Society of Automotive Engineers (SAE), Energetic Particles 2

SAE AMS3603A-2002 (R) Protective Film, High Performance, Polymeric Pressure Sensitive Adhesive, for Aircraft Exterior Applications
SAE USCAR37-2008 High voltage connector performance; Supplement to SAE/USCAR-2

Professional Standard - Commodity Inspection, Energetic Particles 2

SN/T 3703.2-2013 Rules for the inspection of high-voltage electrical apparatus for import and export.Part 2:High voltage insulators of ceramic material

NL-NEN, Energetic Particles 2

NEN 10273-1993 Post insulators for high-voltage installations. Characteristics (IEC 273: 1990)

International Electrotechnical Commission (IEC), Energetic Particles 2

IEC 113/203/CD:2013 IEC/TS 62607-3-2: Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
IEC 62396-2:2012 Process management for avionics - Atmospheric radiation effects - Part 2: Guidelines for single event effects testing for avionics systems
IEC 63175:2021 Fixed energy high intensity proton cyclotron within the energy range of 10 MeV to less than 30 MeV

VN-TCVN, Energetic Particles 2

TCVN 7541-2-2005 High efficiency lighting products.Part 2: Methods for determination of energy performance

GM North America, Energetic Particles 2

GM GM6419M-2001 Performance Requirements of Ultra High Modecular Weight Polyethlene (UHMW PE) Tape
GM 9986333-2014 DEXRON High Performance Automatic Transmission Fluid (DEXRON HP-ATF) (Issue 2)

Beijing Provincial Standard of the People's Republic of China, Energetic Particles 2

DB11/T 1283-2015 Energy Consumption Quotas per Unit Product of Polymer Waterproof Membrane

Hunan Provincial Standard of the People's Republic of China, Energetic Particles 2

DB43/T 2026-2021 Technical Regulations for Rice High Energy Heavy Ion Irradiation Mutation Breeding

ZA-SANS, Energetic Particles 2

NRS 009-2-2-1995 Electricity sales systems Part 2: Functional and performance requirements Section 2: Credit dispensing units

AT-ON, Energetic Particles 2

OENORM EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)

CH-SNV, Energetic Particles 2

SN EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)

PL-PKN, Energetic Particles 2

PN-EN ISO 21304-2-2021-07 E Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)

European Telecommunications Standards Institute (ETSI), Energetic Particles 2

ETSI TS 103 433-2-2021 High-Performance Single Layer High Dynamic Range (HDR) System for use in Consumer Electronics devices; Part 2: Enhancements for Perceptual Quantization (PQ) transfer function based High Dynamic Range (HDR) Systems (SL-HDR2) (V1.3.1)

ETSI - European Telecommunications Standards Institute, Energetic Particles 2

TS 103 433-2-2018 High-Performance Single Layer High Dynamic Range (HDR) System for use in Consumer Electronics devices; Part 2: Enhancements for Perceptual Quantization (PQ) transfer function based High Dynamic Range (HDR) Systems (SL-HDR2) (V1.1.1)

US-CFR-file, Energetic Particles 2

CFR 7-1709.102-2014 Agriculture. Part1709:Assistance to high energy cost communities. SubpartB:RUS high cost energy grant program. Section1709.102:Policy.

Government Electronic & Information Technology Association, Energetic Particles 2

GEIA-STD-0005-2-2006 Standard for Mitigating the Effects of Tin Whiskers in Aerospace and High Performance Electronic Systems
GEIA-STD-0005-3-2008 Performance Testing for Aerospace and High Performance Electronic Interconnects Containing Pb-free Solder and Finishes

American National Standards Institute （ANSI), Energetic Particles 2

ANSI/GEIA STD-0005-3-A-2013 Performance Testing for Aerospace and High Performance Electronic Interconnects Containing Pb-free Solder and Finishes

Canadian Standards Association (CSA), Energetic Particles 2

CSA C22.2 No.0.8-09-2009 Safety functions incorporating electronic technology Second Edition
CSA CEI-1289-2-98-CAN/CSA-1998 Appareils D碋lectrochirurgie A Courant Haute Frequence - Partie 2: Maintenance Premiere Edition; CEI/IEC 1289-2: 1994

SAE - SAE International, Energetic Particles 2

SAE GEIASTD0005_2A-2012 Standard for Mitigating the Effects of Tin Whiskers in Aerospace and High Performance Electronic Systems (Formerly TechAmerica GEIA-STD-0005-2 REV A)

IEC - International Electrotechnical Commission, Energetic Particles 2

TS 62686-2-2019 Process management for avionics - Electronic components for aerospace@ defence and high performance (ADHP) applications - Part 2: General requirements for passive components (Edition 1.0)
PAS 62686-2-2016 Process management for avionics – Electronic components for aerospace@ defence and high performance (ADHP) applications – Part 2: General requirements for passive components (Edition 1.0)
TS 62607-3-2-2017 Nanomanufacturing – Key control characteristics – Part 3-2: Luminescent nanoparticles – Determination of mass of quantum dot dispersion (Edition 1.0)

工业和信息化部, Energetic Particles 2

YS/T 1065.2-2015 Methods for determination of physical properties of zeolites Part 2: Determination of particle size Centrifugal sedimentation method

ES-UNE, Energetic Particles 2

UNE-EN ISO 29463-2:2019 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011)