ZH
RU
ES

Comparison of Three Standards

Comparison of Three Standards, Total:429 items.

In the international standard classification, Comparison of Three Standards involves: Linear and angular measurements, Welding, brazing and soldering, Nuclear energy engineering, Protection against fire, Products of the chemical industry, Fuels, Protection against dangerous goods, Paints and varnishes, Electromechanical components for electronic and telecommunications equipment, Products of the textile industry, IT terminal and other peripheral equipment, Installations in buildings, Vacuum technology, Thermodynamics and temperature measurements, Graphic technology, Office machines, Refractories, Glass, Optics and optical measurements, Construction materials, Petroleum products in general, Farming and forestry, Quality, Radiocommunications, Analytical chemistry, Insulating materials, Organic chemicals, Geology. Meteorology. Hydrology, Water quality, Inks. Printing inks, Rubber, Metrology and measurement in general, Solar energy engineering, Aircraft and space vehicles in general, Seals, glands, Measurement of force, weight and pressure, Acoustics and acoustic measurements, Mechanical testing, Surface treatment and coating, Applications of information technology, Air quality, Footwear, Lubricants, industrial oils and related products, Occupational safety. Industrial hygiene, Audio, video and audiovisual engineering, Paint ingredients, Testing of metals, Corrosion of metals, Vocabularies, Particle size analysis. Sieving, Structures of buildings, Plastics, Electrical engineering in general, Shipbuilding and marine structures in general, Standardization. General rules, Environmental protection, Non-ferrous metals, Iron and steel products, Buildings, Rubber and plastics products, Fertilizers.


ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Comparison of Three Standards

  • ASHRAE 4826-2006 Comparative Analysis of Three Solar Models for Tunisia
  • ASHRAE 3847-1995 Comparison of Energy Prediction of Three Ground-Coupling Heat Transfer Calculation Methods
  • ASHRAE SE-99-14-1-1999 Miscibility Comparison for Three Refrigerant Mixtures and Four Component Refrigerants
  • ASHRAE AC-02-14-2-2002 Comparison of Three Fault Detection Methods Based on Field Data of an Air-Handling Unit
  • ASHRAE MN-00-5-3-2000 Comparative Analysis of Life-Cycle Costs of Geothermal Heat Pumps and Three Conventional HVAC Systems
  • ASHRAE MN-00-2-3-2000 GSHP Bore Field Performance Comparisons of Standard and Thermally Enhanced Grout
  • ASHRAE 105-2014 Standard Methods of Measuring@ Expressing and Comparing Building Energy Performance and Greenhouse Gas Emissions
  • ASHRAE 105 ERTA-2014 Standard Method of Determining@ Expressing@ and Comparing Building Energy Performance and Greenhouse Gas Emissions
  • ASHRAE 105 SPANISH-2014 Métodos Estándar para Determinar@ Expresar y Comparar la Performance Energética en Construcciones y las Emisiones de los Gases de Efecto Invernadero
  • ASHRAE 4611-2003 Climate Classification for Building Energy Codes and Standards: Part 2 - Zone Definitions@ Maps@ and Comparisons
  • ASHRAE SE-99-06-04-1999 Adaptation of the BESTEST Intermodel Comparsion Method for Proposed ASHRAE Standard 140P: Method of Test for Building Energy Simulation Programs
  • ASHRAE SF-98-17-1-1998 Comparison of Duct Computer Models That Could Provide Input to the Proposed Thermal Distribution Standard Method of Test (RP-852)

Underwriters Laboratories (UL), Comparison of Three Standards

  • UL 340-1993 UL Standard for Safety Test for Comparative Flammability of Liquids (Third Edition)
  • UL 340-2009 UL Standard for Safety Test for Comparative Flammability of Liquids (Fifth Edition)
  • UL 340-2017 UL Standard for Safety Test for Comparative Flammability of Liquids (Sixth Edition)
  • UL 340 BULLETIN-2013 UL Standard for Safety Test for Comparative Flammability of Liquids (COMMENTS DUE: November 11@ 2013)
  • UL 340 BULLETIN-2008 UL Standard for Safety Test for Comparative Flammability of Liquids (COMMENTS DUE: January 12@ 2009)
  • UL 340 BULLETIN-2017 UL Standard for Safety Test for Comparative Flammability of Liquids (COMMENTS DUE: March 16@ 2017)

Korean Agency for Technology and Standards (KATS), Comparison of Three Standards

CN-STDBOOK, Comparison of Three Standards

  • 图书 3-8772 A Comparative Interpretation of the New "Standardization Law"
  • 图书 3-9058 Cement Kiln Waste Heat Power Generation Acceptance Standards and Regulations Comparison Manual

American Welding Society (AWS), Comparison of Three Standards

  • WRC 555:2015 A Comparison of Criteria for Acceptance of Risk
  • WRC 434:1998 Design and Inservice Margins of Power Piping Systems: A Comparative Study of U. S., Canadian and European Codes & Standards

National Metrological Verification Regulations of the People's Republic of China, Comparison of Three Standards

  • JJG 298-2005 Standard Vibrator in Middle Frequency Band (Comparison Method)
  • JJG 1172-2019 Working Standard Microphones(Free-field Comparison Method)
  • JJG 298-1995 Verification Regulation of Calibration Vibrators
  • JJG 1019-2007 Verification Regulation of Working Standard Microphones (Coupler Comparison Method)
  • JJG 185-2017 500Hz~1MHz Standard Hydrophone Verification Regulations (Free Field Comparison Method)
  • JJG 340-2017 1Hz~2kHz Standard Hydrophone Verification Regulations (Closed Chamber Comparison Method)

Taiwan Provincial Standard of the People's Republic of China, Comparison of Three Standards

Aerospace Industries Association/ANSI Aerospace Standards, Comparison of Three Standards

  • AIA/NAS NAS 823-1991 Cast Surface Comparison Standard (Rev. 2)
  • AIA/NAS NAS823-2011 CAST SURFACE COMPARISON STANDARD Rev 3 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380]

American Society of Mechanical Engineers (ASME), Comparison of Three Standards

Association of German Mechanical Engineers, Comparison of Three Standards

British Standards Institution (BSI), Comparison of Three Standards

  • PD ISO/TR 14799-1:2022 Comparison of worldwide escalator and moving walk safety standards. Clause by clause comparison
  • PD ISO/TR 16765:2003 Comparison of worldwide safety standards on lifts for firefighters
  • PD ISO/TR 14799-2:2023 Tracked Changes. Comparison of worldwide escalator and moving walk safety standards. Abbreviated comparison and comments
  • PD CEN ISO/TR 17844:2004 Welding. Comparison of standardised methods for the avoidance of cold cracks
  • PD ISO/TR 11071-2:2006 Comparison of worldwide lift safety standards. Hydraulic lifts (elevators)
  • PD ISO/TR 11071-1:2004 Comparison of worldwide lift safety standards. Electric lifts (elevators)
  • BS ISO 3567:2012 Vacuum gauges. Calibration by direct comparison with a reference gauge
  • BS EN 61094-5:2002 Measurement microphones - Methods for pressure calibration of working standard microphones by comparison
  • BS EN 61094-5:2016 Tracked Changes. Electroacoustics. Measurement microphones. Methods for pressure calibration of working standard microphones by comparison
  • PD ISO/TR 16764:2003 Lifts, escalators and passenger conveyors. Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility
  • BS PD CEN ISO/TR 18486:2017 Plastics. Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance

American National Standards Institute （ANSI), Comparison of Three Standards

  • ANSI/UL 340a-2009 Standard for Tests for Comparative Flammability of Liquids
  • ANSI/ASHRAE 105-2007 Standard Methods of Measuring, Expressing and Comparing Building Energy Performance
  • ANSI/ASA S1.15-5-2021 American National Standard Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
  • ANSI/ASA S1.15-8-2021 American National Standard Electroacoustics - Measurement microphones - Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison

Aerospace Industries Association, Comparison of Three Standards

AIA/NAS - Aerospace Industries Association of America Inc., Comparison of Three Standards

American Society for Testing and Materials (ASTM), Comparison of Three Standards

  • ASTM D7390-07 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
  • ASTM E1610-17 Standard Guide for Forensic Paint Analysis and Comparison
  • ASTM E1610-02(2008) Standard Guide for Forensic Paint Analysis and Comparison
  • ASTM E1610-02 Standard Guide for Forensic Paint Analysis and Comparison
  • ASTM D4855-97 Standard Practice for Comparing Test Methods
  • ASTM E1610-95(2001) Standard Guide for Forensic Paint Analysis and Comparison
  • ASTM E1610-95 Standard Guide for Forensic Paint Analysis and Comparison
  • ASTM E1610-18 Standard Guide for Forensic Paint Analysis and Comparison
  • ASTM D4855-97(2002) Standard Practice for Comparing Test Methods
  • ASTM F1175-88(2011) Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison
  • ASTM D4958-10(2016) Standard Test Method for Comparison of the Brush Drag of Latex Paints
  • ASTM E220-07 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
  • ASTM E220-07e1 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
  • ASTM E220-19 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
  • ASTM E220-13 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
  • ASTM E220-07a Standard Test Method for Calibration of Thermocouples By Comparison Techniques
  • ASTM F935-00(2004) Standard Test Method for Comparing Cover-Up Correction Media
  • ASTM F935-00 Standard Test Method for Comparing Cover-Up Correction Media
  • ASTM F1454-99(2003) Standard Practice for Comparing Correctable Film Ribbons
  • ASTM F1454-99 Standard Practice for Comparing Correctable Film Ribbons
  • ASTM F935-00(2009) Standard Test Method for Comparing Cover-Up Correction Media
  • ASTM F1454-99(2008) Standard Practice for Comparing Correctable Film Ribbons
  • ASTM C604-18 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
  • ASTM C604-18(2023) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
  • ASTM C729-75(1995)e1 Standard Test Method for Density of Glass by the Sink-Float Comparator
  • ASTM C729-75(2000) Standard Test Method for Density of Glass by the Sink-Float Comparator
  • ASTM E1135-97(2008)e1 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
  • ASTM C1756-11 Standard Guide for Comparing Sealant Behavior to Reference Photographs
  • ASTM D3414-98(2011)e1 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM E1135-19 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
  • ASTM C729-11(2016) Standard Test Method for Density of Glass by the Sink-Float Comparator
  • ASTM E1135-12 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
  • ASTM D4958-97(2004) Standard Test Method for Comparison of the Brush Drag of Latex Paints
  • ASTM D4958-97 Standard Test Method for Comparison of the Brush Drag of Latex Paints
  • ASTM E220-02 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
  • ASTM E3260-21 Standard Guide for Forensic Examination and Comparison of Pressure Sensitive Tapes
  • ASTM E1610-14 Standard Guide for Forensic Paint Analysis and Comparison
  • ASTM C1756-14 Standard Guide for Comparing Sealant Behavior to Reference Photographs
  • ASTM E2935-20 Standard Practice for Conducting Equivalence Tests for Comparing Testing Processes
  • ASTM D3414-98 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM D3414-98(2004) Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM E2935-20e1 Standard Practice for Conducting Equivalence Tests for Comparing Testing Processes
  • ASTM D3638-93(1998) Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
  • ASTM D3638-21 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
  • ASTM F1033-00(2004) Standard Test Method for Comparing Lift-Off Correction Media
  • ASTM F1033-00 Standard Test Method for Comparing Lift-Off Correction Media
  • ASTM D4958-10 Standard Test Method for Comparison of the Brush Drag of Latex Paints
  • ASTM D3638-12 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
  • ASTM D3638-21e1 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
  • ASTM F1033-00(2010) Standard Test Method for Comparing Lift-Off Correction Media
  • ASTM E2488-09 Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
  • ASTM D3448-85(2000) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
  • ASTM D3448-10(2020) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
  • ASTM D5490-93(2002) Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information
  • ASTM F1051-00(2004) Standard Test Method for Comparing Multistrike Film Ribbons
  • ASTM F1051-00 Standard Test Method for Comparing Multistrike Film Ribbons
  • ASTM E1422-01 Standard Guide for Test Methods for Forensic Writing Ink Comparison
  • ASTM E1422-98 Standard Guide for Test Methods for Forensic Writing Ink Comparison
  • ASTM D4298-04 Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
  • ASTM D429-03e1 Standard Test Methods for Rubber Property8212;Adhesion to Rigid Substrates
  • ASTM D4298-95(1999) Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
  • ASTM D4298-04(2010) Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
  • ASTM D3328-06(2020) Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
  • ASTM D4298-22 Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
  • ASTM F1051-00(2009) Standard Test Method for Comparing Multistrike Film Ribbons
  • ASTM D4298-04(2014)e1 Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
  • ASTM D5490-93(2014)e1 Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information
  • ASTM D5490-93(2008) Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information
  • ASTM F396-00 Standard Practice for Comparing One-Time Noncorrectable Typewriter Ribbons
  • ASTM E816-15(2023) Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
  • ASTM E2488-09(2014) Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
  • ASTM F396-00(2004) Standard Practice for Comparing One-Time Noncorrectable Typewriter Ribbons
  • ASTM F396-00(2009) Standard Practice for Comparing One-Time Noncorrectable Typewriter Ribbons
  • ASTM D3650-93(1999) Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis
  • ASTM D3210-95(2002) Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
  • ASTM D3210-95 Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
  • ASTM D5126-90(1998)e1 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in the Vadose Zone
  • ASTM D3638-07 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
  • ASTM F2716-08 Standard Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam
  • ASTM F596-82(1998) Standard Practice for Comparative Evaluation of the Imaging Properties of Dry Electrostatic Toners
  • ASTM D5126-90(2004) Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in the Vadose Zone
  • ASTM D3328-06 Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
  • ASTM D3328-00 Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
  • ASTM D3210-95(2008) Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
  • ASTM C1921/C1921M-21 Standard Test Method for Comparative Impact Testing of Gypsum Panel Outside 90° Corner Systems
  • ASTM C1921/C1921M-22 Standard Test Method for Comparative Impact Testing of Gypsum Panel Outside 90° Corner Systems
  • ASTM F2716-08(2020) Standard Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam
  • ASTM C729-11(2022) Standard Test Method for Density of Glass by the Sink-Float Comparator
  • ASTM D3210-95(2016) Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
  • ASTM D3210-95(2023) Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
  • ASTM E816-05 Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
  • ASTM C1810/C1810M-20a Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
  • ASTM A926-97 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
  • ASTM C1810/C1810M-19 Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
  • ASTM C1810/C1810M-21 Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
  • ASTM C1810/C1810M-20 Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
  • ASTM D3650-93(2011) Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis
  • ASTM F505-87(2011) Standard Practice for Comparative Evaluation of Imaging Properties of Liquid Electrostatic Toners
  • ASTM C1810/C1810M-21a Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
  • ASTM E2926-17 Standard Test Method for Forensic Comparison of Glass Using Micro X-ray Fluorescence (µ-XRF) Spectrometry
  • ASTM E3149-18 Standard Guide for Facial Image Comparison Feature List for Morphological Analysis
  • ASTM D7390-07(2012) Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
  • ASTM F1833-97(2017) Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
  • ASTM C1810/C1810M-22 Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
  • ASTM D8288-19 Standard Test Method for Comparison of Metalworking Fluids Using a Tapping Torque Test Machine
  • ASTM D7298-06(2017) Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
  • ASTM D3328-06(2013) Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
  • ASTM E2488-22 Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
  • ASTM D3801-19 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
  • ASTM D3801-19a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
  • ASTM D5490-93e1 Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information
  • ASTM D5619-00 Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine
  • ASTM D6165-97(2003) Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials
  • ASTM D5619-00(2005) Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine
  • ASTM D561-82(1996)e1 Standard Specification for Carbon Black Pigment for Paint
  • ASTM A926-03 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
  • ASTM D6165-97 Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials
  • ASTM A926-03(2008) Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
  • ASTM D3801-00 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
  • ASTM D3801-20 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
  • ASTM A833-17 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM C1756-17 Standard Guide for Comparing Seal or Sealant Behavior to Reference Photographs
  • ASTM D5619-00(2011) Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine
  • ASTM D6165-97(2012) Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials
  • ASTM C1756-17a Standard Guide for Comparing Seal or Sealant Behavior to Reference Photographs
  • ASTM D3801-20a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
  • ASTM A833-19 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM A833-08a(2014) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM D5126/D5126M-16 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
  • ASTM D5126-16e1 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
  • ASTM D5126/D5126M-90(2010)e1 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
  • ASTM C1810/C1810M-23 Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
  • ASTM E816-15 Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
  • ASTM G158-98(2021) Standard Guide for Three Methods of Assessing Buried Steel Tanks
  • ASTM G158-98(2016) Standard Guide for Three Methods of Assessing Buried Steel Tanks
  • ASTM G15-08 Standard Terminology Relating to Corrosion and Corrosion Testing
  • ASTM F649-80(1999) Standard Practice for Secondary Calibration of Airborne Particle Counter Using Comparison Procedures
  • ASTM F660-83(2002)e1 Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
  • ASTM F660-83(2007) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
  • ASTM D6165-97(2008) Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials
  • ASTM A944-22 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
  • ASTM F660-83(2013) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
  • ASTM A926-03(2014) Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
  • ASTM D5009-02(2005) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
  • ASTM A944-05 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
  • ASTM D5009-02 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
  • ASTM A944-99 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
  • ASTM A944-99(2004) Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
  • ASTM D5009-96(2002) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
  • ASTM D5009-96 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
  • ASTM A944-10 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
  • ASTM E494-20 Standard Practice for Measuring Ultrasonic Velocity in Materials by Comparative Pulse-Echo Method
  • ASTM F660-83(1993) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
  • ASTM E1225-04 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
  • ASTM D5009-02(2011) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
  • ASTM E1225-20 Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
  • ASTM F660-83(2019) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
  • ASTM D5009-02(2017) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
  • ASTM A833-08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • ASTM D5009-02(2023) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
  • ASTM D3801-10 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
  • ASTM E1225-09 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
  • ASTM E1225-13 Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
  • ASTM E3002-15(2023) Standard Practice for Assessing the Comparative Efficacy of Products Used for the Decontamination of Chemical Warfare Agents (CWAs) on Skin
  • ASTM D5327-97(2007) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
  • ASTM D5327-97(2002) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
  • ASTM E3002-15 Standard Practice for Assessing the Comparative Efficacy of Products Used for the Decontamination of Chemical Warfare Agents (CWAs) on Skin
  • ASTM E3254-23 Standard Practice for Use of Color in the Visual Examination and Forensic Comparison of Soil Samples
  • ASTM A944-10(2015) Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
  • ASTM D5327-97(2013) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
  • ASTM E2921-16 Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems
  • ASTM E1455-03 Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters
  • ASTM D7390-18 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
  • ASTM D7390-18e1 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
  • ASTM G158-98 Standard Guide for Three Methods of Assessing Buried Steel Tanks
  • ASTM G158-98(2010) Standard Guide for Three Methods of Assessing Buried Steel Tanks
  • ASTM D5386-05 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
  • ASTM D5386-93b(2000)e1 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
  • ASTM D5386-16 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
  • ASTM E1347-06(2015) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
  • ASTM D5048-20 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
  • ASTM D5048-03 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
  • ASTM D5048-18 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
  • ASTM D5048-97 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
  • ASTM D5048-09 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
  • ASTM D5327-97 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
  • ASTM D5048-19 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
  • ASTM D5327-97(2021)e1 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
  • ASTM D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
  • ASTM D5048-14 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
  • ASTM E1455-03(2010) Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters
  • ASTM D2885-10 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
  • ASTM E2921-13 Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes and Rating Systems
  • ASTM F904-98(2008) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
  • ASTM D2885-03 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
  • ASTM E207-00 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials By Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
  • ASTM E207-08 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
  • ASTM D2885-19a Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
  • ASTM D2885-19 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
  • ASTM D2885-19b Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
  • ASTM D2885-10a Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
  • ASTM D2885-20 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
  • ASTM E1347-06(2020) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
  • ASTM D347-97 Standard Tables for Volume and Specific Gravity Correction for Creosote, Creosote-Coal Tar Solution and Coal Tar

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Comparison of Three Standards

IN-BIS, Comparison of Three Standards

AENOR, Comparison of Three Standards

  • UNE 66055:1982 COMPARISON OF TWO VARIANCES OR TWO STANDARD DEVIATIONS
  • UNE 66054:1978 COMPARISON OF THE VARIANCE OR OF THE STANDARD DEVIATION OF A LOT WITH A GIVEN VALUE
  • UNE-EN 61094-5:2002 Measurement microphones -- Part 5: Methods for pressure calibration of working standard microphones by comparison.
  • UNE-EN 61094-8:2013 Measurement microphones. Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison
  • UNE-CEN/TR 15106:2005 IN Fertilizers - Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography - Comparison of non-standardized Lucena method with EN 13368-2:2001

ES-UNE, Comparison of Three Standards

  • UNE 66055:1983 ERRATUM COMPARISON OF TWO VARIANCES OR TWO STANDARD DEVIATIONS
  • UNE-CEN ISO/TR 17844:2007 IN Welding - Comparison of standardised methods for the avoidance of cold cracks (ISO/TR 17844:2004)
  • UNE-EN 61094-5:2017 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison

International Organization for Standardization (ISO), Comparison of Three Standards

  • ISO/TR 14799-1:2015 Comparison of worldwide escalator and moving walk safety standards - Part 1: Rule by rule comparison
  • ISO/TR 14799-1:2022 Comparison of worldwide escalator and moving walk safety standards — Part 1: Clause by clause comparison
  • ISO/TR 14799-2:2015 Comparison of worldwide escalator and moving walk safety standards - Part 2: Abbreviated comparison and comments
  • ISO/TR 14799-2:2023 Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments
  • ISO/TR 17844:2004 Welding - Comparison of standardised methods for the avoidance of cold cracks
  • ISO/TR 14799-2 Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments
  • ISO/TR 11071-1:1990 Comparison of worldwide lift safety standards; part 1: electric lifts (elevators)
  • ISO/TR 11071-1:2004 Comparison of worldwide lift safety standards - Part 1: Electric lifts (elevators)
  • ISO/TR 11071-2:2006 Comparison of worldwide lift safety standards - Part 2: Hydraulic lifts (elevators)
  • ISO/TR 11071-2:1996 Comparison of worldwide lift safety standards - Part 2: Hydraulic lifts (elevators)
  • ISO/TR 11071-1:1990/Amd 1:1999 Comparison of worldwide lift safety standards - Part 1: Electric lifts (elevators); Amendment 1: References to Japanese standards
  • ISO 4967:1979 Steel; Determination of content of non-metallic inclusions; Micrographic method using standard diagrams
  • ISO/CD TR 8101-10:2023 Fire safety on lifts — Part 10: Comparison of worldwide safety standards on lifts for firefighters
  • ISO/TR 11071-2:1996/Amd 1:1999 Comparison of worldwide lift safety standards - Part 2: Hydraulic lifts (elevators); Amendment 1: Reference to Japanese and Australian standards
  • ISO/IEC Guide 2:1996 Standardization and related activities - General vocabulary
  • ISO/TR 18486:2016 Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance

Association Francaise de Normalisation, Comparison of Three Standards

  • FD ISO/TR 14799-1:2022 Comparaison des normes mondiales de sécurité des escaliers mécaniques et trottoirs roulants - Partie 1 : comparaison paragraphe par paragraphe
  • FD A89-271*FD CEN ISO/TR 17844:2005 Welding - Comparison of standardised methods for the avoidance of cold cracks
  • FD CEN ISO/TR 17844:2005 Soudage - Comparaison de méthodes normalisées pour éviter les fissures à froid
  • NF X06-061:1987 Applications de la statistique - Comparaison d'une variance (d'un écart-type) à une valeur donnée
  • NF X06-063:1987 Applications de la statistique - Comparaison du rapport de deux variances - (deux écarts-types) à une valeur donnée.
  • NF A35-604:1993 Iron and steel-Tools steels-Comparison of French and foreign standard grades
  • NF ISO 23185:2010 Critères d'évaluation comparative des ressources terminologiques - Concepts, principes et exigences d'ordre général
  • NF T90-700*NF EN 16101:2012 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
  • NF A35-600:1993 Iron and steel-Unalloyed general purpose structural steel-Comparison of the European and American standardized grades
  • NF X10-525:1979
  • NF A35-602:1991 Iron and steel-Stainless steel-Comparison of French, German, American, British, Japanese and Swedisch standardized grades
  • NF A35-603:1993 Iron and steel- steels for boilers and pressure vessels-Comparison of French, German, British and American standardized grades
  • A35-602:1991 Iron and steel. Stainless steel. Comparison of french, german, american, british, japanese and swedish standardized grades.
  • NF G07-124:1991 Textiles. Testing fabrics. Observation method for checks requiring a visual assessment in comparison with standard ranges.
  • NF EN 61094-5:2016 Électroacoustique - Microphones de mesure - Partie 5 : méthodes pour l'étalonnage en pression par comparaison des microphones étalons de travail
  • NF C97-335*NF EN 61094-5:2016 Electroacoustics - Measurement microphones - Part 5 : methods for pressure calibration of working standard microphones by comparison
  • NF C97-338*NF EN 61094-8:2013 Measurement microphones - Part 8 : methods for determining the free-field sensitivity of working standard microphones by comparison
  • NF A35-601:1993 Iron and steel products-Special unalloyed and alloyed steels for heat treatment -Comparison of the European, American and Japanese standardized grades
  • NF EN 61094-8:2013 Microphones de mesure - Partie 8 : méthodes pour la détermination de l'efficacité en champ libre par comparaison des microphones étalons de travail

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Comparison of Three Standards

  • GB/T 34873-2017 Vacuum gauges—Calibration by direct comparison with a reference gauge
  • GB/T 20441.5-2017 Electroacoustics—Measurement microphones—Part 5: Methods for pressure calibration of working standard microphones by comparison
  • GB/T 34876-2017 Vacuum technology—Vacuum gauges—Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., Comparison of Three Standards

  • SP 112 COMPARATOR-2016 Quality Standard For Evaluation Of Cast Surface Finishes – Visual and Tactile Method – Three Dimensional Cast Surface Comparator

German Institute for Standardization, Comparison of Three Standards

  • DIN-Fachbericht CEN ISO/TR 17844:2004 Welding - Comparison of standardised methods for the avoidance of cold cracks (ISO/TR 17844:2004); German translation of CEN ISO/TR 17844:2004
  • DIN EN 16101:2012-12 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment; German version EN 16101:2012
  • DIN 58964:2015-09 Quality assurance of POCT results - Assessment criteria for comparison measurement and implementation
  • DIN 58964:2015 Quality assurance of POCT results - Assessment criteria for comparison measurement and implementation
  • DIN 28418-1:1976 Vacuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vacuum gauge
  • DIN EN 60454 Bb.1:1999 Pressure-sensitive adhesive tapes for electrical purposes - List of relevant standards, comparison of types (status as of 1999)
  • DIN EN 60626 Bb.1:2000 Combined flexible materials for electrical insulation - Comparison of types - List of relevant standards (status as of 2000 March)
  • DIN 28418-2:1978 Vakuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vaccum gauge, ionization vacuum gauge
  • DIN 28418-3:1980 Vacuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vacuum gauge, thermal conductivity gauges
  • DIN EN 61094-5:2016-12 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2016); German version EN 61094-5:2016
  • DIN SPEC 86002:2011-02 Ships and marine technology - Comparison of copper alloys in accordance with DIN and DIN EN standards for pipeline equipment
  • DIN V 86002:2000 Ships and marine technology - Comparison of copper alloys in accordance with DIN and DIN EN standards for pipeline equipment
  • DIN SPEC 86002:2011 Ships and marine technology - Comparison of copper alloys in accordance with DIN and DIN EN standards for pipeline equipment
  • DIN 38402-71:2020-10 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 71: Equivalence of two analysis methods based on the comparison of analysis results (A 71)
  • DIN EN 45020:2007 Standardization and related activities - General vocabulary (ISO/IEC Guide 2:2004); Trilingual version EN 45020:2006
  • DIN EN 61094-8:2013-04 Measurement microphones - Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison (IEC 61094-8:2012); German version EN 61094-8:2012 + AC:2013

Danish Standards Foundation, Comparison of Three Standards

  • DS/CEN ISO/TR 17844:2004 Welding - Comparison of standardised methods for the avoidance of cold cracks
  • DS/EN 61094-5:2002 Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
  • DS/EN 61094-8/AC:2013 Electroacoustics - Measurement microphones - Part 8: Methods for free-field calibration of working standard microphones by comparison
  • DS/EN 61094-8:2013 Electroacoustics - Measurement microphones - Part 8: Methods for free-field calibration of working standard microphones by comparison
  • DS/CEN/TR 15106:2006 Fertilizers - Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography - Comparison of non-standardized Lucena method with EN 13368-2:2001

未注明发布机构, Comparison of Three Standards

  • BS PD CEN ISO/TR 17844:2004 Welding — Comparison of standardised methods for the avoidance of cold cracks
  • BS EN 61094-8:2012(2013) Electroacoustics — Measurement microphones Part 8 : Methods for free - field calibration of working standard microphones by comparison

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Comparison of Three Standards

  • ITU-R P.1148-1995 Standardized Procedure for Comparing Predicted and Observed HF Sky-Wave Signal Intensities and the Presentation of Such Comparisons
  • ITU-R TF.458-2-1990 International Comparisons of Atomic Time Scales - Section 7B - Specifications for the Standard-Frequency and Time-Signal Services

Yunnan Provincial Standard of the People's Republic of China, Comparison of Three Standards

  • DB53/ 055.3-1999 Wenshan Panax notoginseng comprehensive standard Panax notoginseng seedling quality standard
  • DB53/ 055.2-1999 Quality Standard of Sanqi Seed
  • DB53/ 073-1999 Yuanjiang mango comprehensive standard three-year mango varieties

European Committee for Standardization (CEN), Comparison of Three Standards

  • EN ISO/TR 17844:2004 Welding - Comparison of standardised methods for the avoidance of cold cracks
  • EN 61094-5:2001 Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by comparison
  • CEN/TR 15106:2005 Fertilizers - Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography - Comparison of non-standardized Lucena method with EN 13368-2:2001

CZ-CSN, Comparison of Three Standards

KR-KS, Comparison of Three Standards

  • KS B ISO 11071-2-2009 Comparison of worldwide elevator safety standards－Hydraulic elevators
  • KS C IEC 61094-5A-2017 Electroacoustics — Measurement microphones — Part 5: Methods for pressure calibration of working standard microphones by comparison

International Telecommunication Union (ITU), Comparison of Three Standards

  • ITU-R P.1148-1997 Standardized procedure for comparing predicted and observed HF sky-wave signal intensities and the presentation of such comparisons

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Comparison of Three Standards

  • GB 10628-1989 Gas analysis－Determination of composition of calibration gas mixtures－Comparison methods
  • GB/T 10628-1989 Gas analysis--Determination of composition of calibration gas mixtures—Comparison methods

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Comparison of Three Standards

  • ASHRAE 105 ADD A AND B-2012 Standard Methods of Measuring, Expressing and Comparing Building Energy Performance
  • ASHRAE 105-2007 Standard Methods of Measuring, Expressing and Comparing Building Energy Performance Includes Access to Additional Content

RU-GOST R, Comparison of Three Standards

  • GOST 9378-1975 Surface roughness comparison specimens. Technical requirements

ZA-SANS, Comparison of Three Standards

  • ARP 11071-1-2008 Comparison of worldwide lift safety standards Part 1: Electric lifts (elevators)
  • ARP 11071-2-2008 Comparison of worldwide lift safety standards Part 2: Hydraulic lifts (elevators)
  • SANS 61094-5:2009 Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by comparison

HU-MSZT, Comparison of Three Standards

U.S. Military Regulations and Norms, Comparison of Three Standards

VN-TCVN, Comparison of Three Standards

  • TCVN 7168-1-2007 Comparison of worldwide lift safety standards.Part 1: Electric lifts (elevators)

RO-ASRO, Comparison of Three Standards

  • STAS 7948/6-1975 INORGANIC PIGMENTS Determination of colour by comparing with the colour standard sample

EEMUA - Engineering Equipment and Materials Users Association, Comparison of Three Standards

  • PUB NO 155-1988 Standard Test Method for Comparative Performance of Flammable Gas Detectors Against Poisoning

TIA - Telecommunications Industry Association, Comparison of Three Standards

  • TSB81-1996 Comparison of PBX Transmission Requirements in Standards ANSI/TIA/EIA-464-B and ETSI ETS 300 439
  • TSB-147-2004 Telecommunications - Multiline Terminal Systems - Comparison of PBX Transmission Requirements in Standards TIA-464-C and ETSI ES 201 168 Version 1.1

Institute of Electrical and Electronics Engineers (IEEE), Comparison of Three Standards

International Electrotechnical Commission (IEC), Comparison of Three Standards

  • IEC TR 61963:2005 Nuclear power plants - Main control room - Comparison of IEC 60964 to similar standards on control room design
  • IEC 61094-8:2012 Measurement microphones - Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison

US-FCR, Comparison of Three Standards

  • FCR COE CRD-C 24-01-2001 Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforced Steel

ETSI - European Telecommunications Standards Institute, Comparison of Three Standards

  • ETR 327-1996 Business TeleCommunications (BTC); Comparison of PBX Transmission Requirements in Standards ANSI/TIA/EIA 464-B and ETS 300 439

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Comparison of Three Standards

  • IEEE SA IC-2018 Industry Connections (IEEE‐IC) Landmarks and Measurement Standards Comparison in 3D Body‐model Processing

Acoustical Society of America (ASA), Comparison of Three Standards

  • ASA S1.15 PART 5-2021 American National Standard Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
  • ASA S1.15 PART 8-2021 American National Standard Electroacoustics - Measurement microphones - Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison

Lithuanian Standards Office , Comparison of Three Standards

  • LST EN 61094-5-2002 Measurement microphones. Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2001)

API - American Petroleum Institute, Comparison of Three Standards

  • API PUBL 4400-1984 Numerical Modeling of Ozone Population Exposure: Application to a Comparison of Alternative Ozone Standards (Withdrawn)

机械工业部, Comparison of Three Standards

  • JB/T 7395.5-1994 Electrical measuring instruments terminology standard, detector, stable power supply and comparative measuring instrument

Henan Provincial Standard of the People's Republic of China, Comparison of Three Standards

  • DB41/T 997.5-2014 Grade 4 Seed Quality Standards for Crops Part 5: Three-line Hybrids of Sorghum
  • DB41/T 997.12-2014 Four-level seed quality standard for crops Part 12: Three-line hybrids of rapeseed
  • DB41/T 997.4-2014 Grade 4 Seed Quality Standards for Crops Part 4: Three-line Hybrids of Rice

European Committee for Electrotechnical Standardization（CENELEC）, Comparison of Three Standards

  • EN 61094-5:2016 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison

AGMA - American Gear Manufacturers Association, Comparison of Three Standards

  • 2000FTM3-2000 Comparison of New Gear Metallurgy Documents@ ISO 6336-5 and AGMA 923 with Gear Rating Standards AGMA 2001 and 2003

Fujian Provincial Standard of the People's Republic of China, Comparison of Three Standards

  • DB35/T 82.4-1997 Identification method and evaluation standard of resistance to rice borer

Inner Mongolia Provincial Standard of the People's Republic of China, Comparison of Three Standards

  • DB15/T 437.1-2007 Sanhe Cattle Feeding and Management Technical Standard Part 1: Breeding

AASHTO - American Association of State Highway and Transportation Officials, Comparison of Three Standards

  • T159-1988 Standard Specification for Comparing Concrete on the Basis of the Bond Developed with Reinforcing Steel (Nineteenth Edition; ASTM C234-87)

The American Road & Transportation Builders Association, Comparison of Three Standards

  • AASHTO T 159-1988 Standard Method of Test for Comparing Concrete on the Basis of the Bond Developed with Reinforcing Steel HM-22; Part IIA; ASTM Designation: C 234-87; (Discontinued) R(2000)

PH-BPS, Comparison of Three Standards

  • PNS ASTM E1347:2021 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

Guizhou Provincial Standard of the People's Republic of China, Comparison of Three Standards

  • DB5227/T 68.1-2014 Guizhou Province Sandu Shui Autonomous County tomato seed quality standard pdf

WRC - Welding Research Council, Comparison of Three Standards

  • BULLETIN 434-1998 DESIGN AND INSERVICE MARGINS OF POWER PIPING SYSTEMS: A COMPARATIVE STUDY OF U. S.@ CANADIAN AND EUROPEAN CODES & STANDARDS

  Standard guide for conducting scouting analysis and comparisons of coatings, esd three model standard grades, Compare the results of the three methods, Three standard pH buffer solutions, standard comparison, standard comparison, Three Data Comparison Methods, Comparison of Three Standards, Three standard buffer solutions, pH of three standard buffer solutions, How to prepare three standard buffers for pH, ph standard buffer solution, Comparison of Three Measurement Methods, Standard Comparative Analysis, Three ph standard buffer solutions, What method is used to compare the three measurement methods, Compared with the standard sample, Normalized comparison, Using three measurement methods to compare, Comparison of Three Bridges.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved