ZH
RU
ES

Standard Series Gravimetry

Standard Series Gravimetry, Total:500 items.

In the international standard classification, Standard Series Gravimetry involves: Passenger and cabin equipment, Milk and milk products, Construction materials, Non-ferrous metals, Products of the textile industry, Paper and board, Analytical chemistry, Electrical wires and cables, Earthworks. Excavations. Foundation construction. Underground works, Aircraft and space vehicles in general, Coals, Finances. Banking. Monetary systems. Insurance, Air quality, Acoustics and acoustic measurements, Surface treatment and coating, Insulating materials, Radiation measurements, Water quality, Testing of metals, Iron and steel products, Structures of buildings, Plastics, Mechanical testing, Hydraulic fluids, Paints and varnishes, Organic chemicals, Fasteners for aerospace construction, Screw threads, Nuclear energy engineering, Linear and angular measurements, Interface and interconnection equipment, Installations in buildings, Quality, Road engineering, Wastes, Materials for aerospace construction, Adhesives, Paint ingredients, Petroleum products in general, Fertilizers, Metalliferous minerals, Products of the chemical industry, Seals, glands, Metrology and measurement in general, Aerospace electric equipment and systems, Software development and system documentation, Protection of and in buildings, Optics and optical measurements, Soil quality. Pedology, Test conditions and procedures in general, Pipeline components and pipelines, Sports equipment and facilities, Powder metallurgy, Pesticides and other agrochemicals, CHEMICAL TECHNOLOGY, Measurement of force, weight and pressure, Lubricants, industrial oils and related products.

Association Francaise de Normalisation, Standard Series Gravimetry

NF L61-027*NF EN 4727:2017 Aerospace series - Standardized passenger seat weight information
NF EN 4727:2017 Série aérospatiale - Définition standardisée du poids d'un siège passager
NF L67-001:2010 Aerospace series - Aircraft internal air quality standards, criteria and determination methods.
NF L61-023*NF EN 4723:2016 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats
NF EN 2545-3:1995 Série aérospatiale - Produits pour refusion et pièces moulées en titane et alliages de titane - Spécification technique - Partie 3 : pièces type et pièces de série.
NF L00-104*NF EN 9133:2018 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products
NF L10-702-3*NF EN 2103-3:1992 Aerospace series. Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. Part 3 : pre-production and production castings.
NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
NF L00-104:2005 Aerospace series - Quality management systems - Qualification Procedure for aerospace standard parts.
NF EN 4705:2020 Série aérospatiale - Méthodes de mesure du comportement lié à la durée de vie des systèmes d'éclairage dans un environnement normalisé destiné aux aéronefs
NF EN 14772:2021 Brides et leurs assemblages - Contrôle de l'assurance de la qualité et essais de joints conformément aux séries de normes EN 1514 et EN 12560
NF L52-151-005*NF EN 2346-005:2017 Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 oC and 260 oC - Part 005 : DW family, single UV laser printable and multicore assembly - Light weight - Product standard
NF EN 2103-3:1992 Série aérospatiale - Produits pour refusion et pièces moulées en acier et alliages base nickel et base cobalt - Spécification technique - Partie 3 : pièces types et pièces de série.
NF X06-041-2*NF ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2 : basic method for the determination of repeatability and reproducibility of a standard measurement method
NF L55-072*NF EN 4705:2020 Aerospace series - Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment
NF EN 9133:2018 Série aérospatiale - Systèmes de management de la qualité - Procédure de qualification pour pièces aérospatiales normalisées

German Institute for Standardization, Standard Series Gravimetry

DIN EN 4727:2017 Aerospace series - Standardized passenger seat weight information; German and English version EN 4727:2017, only on CD-ROM
DIN EN 4727:2017-10 Aerospace series - Standardized passenger seat weight information; German and English version EN 4727:2017, only on CD-ROM / Note: CD-ROM
DIN EN 4617:2008-02 Aerospace series - Recommended practices for standardising company standards; German and English version EN 4617:2006
DIN EN 12341:2014-08 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German version EN 12341:2014 / Note: To be replaced by DIN EN 12341 (2022...
DIN EN 12341:2022-06 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German and English version prEN 12341:2022 / Note: Date of issue 2022-05-...
DIN EN 4723:2015 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats; German and English version EN 4723:2015
DIN EN 4723:2015-12 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats; German and English version EN 4723:2015
DIN EN 9133:2018 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products; German and English version EN 9133:2018
DIN 43536:2012-06 Lead-acid batteries - Traction batteries 80 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design
DIN 43535:2012-06 Lead-acid batteries - Traction batteries 24 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design
DIN 43531:2012-06 Lead-acid batteries - Traction batteries 48 V with cells of dimension series L in accordance with DIN EN 60254-2 for industrial trucks - Dimensions, weights, design
DIN 1025-1:2009 Hot rolled I-sections - Part 1: Narrow flange I-sections, I-series - Dimensions, masses, sectional properties
DIN EN 2346-005:2018-02 Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard; German and English version EN 2346-005:...
DIN EN 2346-004:2007-04 Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard; German and English version EN 2346-004:...
DIN 1025-1:1995 Hot rolled I-beams - Part 1: Narrow flange I-beams, I-serie - Dimensions, masses, sectional properties
DIN EN 9133:2018-10 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products; German and English version EN 9133:2018
DIN EN 12341:2022 Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter; German and English version prEN 12341:2022
DIN EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter; English version of DIN EN 14907

British Standards Institution (BSI), Standard Series Gravimetry

BS EN 4727:2015 Aerospace series. Standardized passenger seat weight information
BS EN 4727:2017 Tracked Changes. Aerospace series. Standardized passenger seat weight information
BS EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
BS EN 14907:2005(2010) Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
BS EN 4618:2009 Aerospace series. Aircraft internal air quality standards, criteria and determination methods
19/30389262 DC BS EN 7110. Aerospace series. Bolt, 12 point flange head, metric series. Product standard
BS EN 4723:2015 Aerospace series. Standardized measurement methods for comfort and living space criteria for aircraft passenger seat
HB 10144-1997 ISO 9000 Quality Systems. The way forward
BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
PD IEC TR 63400:2021 Nuclear facilities. Instrumentation, control and electrical power systems important to safety. Structure of the IEC SC 45A standards series
BS EN 9133:2004 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
BS ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results - Basic method for the determination of repeatability and reproducibility of a standard measurement method
BS ISO/IEC 14143-6:2012 Information technology. Software measurement. Functional size measurement. Guide for use of ISO/IEC 14143 series and related International Standards
22/30443631 DC BS EN 12341. Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS EN 4705:2020 Aerospace series. Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment
BS ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results. Basic methods for the determination of repeatability and reproducibility of a standard measurement method

European Committee for Standardization (CEN), Standard Series Gravimetry

EN 4727:2015 Aerospace series - Standardized passenger seat weight information
EN 4727:2017 Aerospace series - Standardized passenger seat weight information
EN 13798:2002 Hydrometry - Specification for a reference raingauge pit
EN 14907:2005 Ambient air quality Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
EN 4618:2009 Aerospace series - Aircraft internal air quality standards, criteria and determination methods
EN 4723:2015 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats
FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN 9121:2005 Aerospace series - Quality management systems - Assessment applicable to stockist distributors
EN 2346-005:2017 Aerospace series - Cable@ electrical@ fire resistant - Operating temperatures between -65 ��and 260 ��- Part 005: DW family@ single UV laser printable and multicore assembly - Light weight - Product standard
EN 2346-005:2013 Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 掳C and 260 掳C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard
EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
prEN 3375-011-2021 Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Light weight - Type KL - Product standard

ES-UNE, Standard Series Gravimetry

UNE-EN 4727:2017 Aerospace series - Standardized passenger seat weight information (Endorsed by Asociación Española de Normalización in June of 2017.)
UNE-EN 4617:2006 Aerospace series - Recommended practices for standardising company standards (Endorsed by AENOR in July of 2006.)
UNE-EN 4723:2015 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats (Endorsed by AENOR in October of 2015.)
UNE-EN 2346-005:2017 Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard (Endorsed by Asociación Española de No...
UNE-EN 9133:2019 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products
UNE-EN 2346-004:2006 Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard (Endorsed by AENOR in November of 2006.)
UNE-EN 4705:2020 Aerospace series - Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment (Endorsed by Asociación Española de Normalización in April of 2020.)

Aerospace, Security and Defence Industries Association of Europe (ASD), Standard Series Gravimetry

ASD-STAN PREN 4727-2014 Aerospace series Standardized passenger seat weight information (Edition P 1)
ASD-STAN PREN 4727-2015 Aerospace series Standardized passenger seat weight information (Edition P 2)
ASD-STAN PREN 3841-202-1996 Aerospace Series Circuit Breakers Test Methods Part 202 : Dimensions and Masses (Edition P 1)
ASD-STAN PREN 4723-2013 Aerospace series Standardized measurement methods for comfort and living space criteria for aircraft passenger seats (Edition P 1)
ASD-STAN PREN 3475-202-1992 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 202 - Mass (Issue P 1)
ASD-STAN TR 4815-2015 Aerospace series Flange couplings, up to 21 000 kPa Design standard Inch series (Edition 1)
ASD-STAN PREN 9133-2016 Aerospace series Quality Management Systems Qualification Procedure for Aerospace Standard Products (Edition P 2)
ASD-STAN PREN 2557-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of Mass Per Unit Area (Issue P 1)
ASD-STAN TR 4618-2014 Aerospace series Aircraft internal air quality standards, criteria and determination methods (Edition 1; Incorporated Corrigendum: 11/13/2014)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Standard Series Gravimetry

PREN 4727-2014 Aerospace series Standardized passenger seat weight information (Edition P 1)
PREN 4727-2015 Aerospace series Standardized passenger seat weight information (Edition P 2)
PREN 4618-2004 Aerospace series Aircraft internal air quality standards@ criteria and determination methods (Edition P 1)
TR 4666-2016 Aerospace series Aircraft integrated air quality and pressure standards@ criteria and determination methods (Edition 1)
PREN 4617-2004 Aerospace series Recommended practices for standardising company standards (Edition P 1)
PREN 3580-1991 Aerospace Series Standard-Weight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 21000 kPa with 8 Degree 30' Fitting in Titanium Product Standard (Issue P 1)
PREN 4723-2013 Aerospace series Standardized measurement methods for comfort and living space criteria for aircraft passenger seats (Edition P 1)
TR 4618-2014 Aerospace series Aircraft internal air quality standards@ criteria and determination methods (Edition 1; Incorporated Corrigendum: 11/13/2014)
TR 4815-2015 Aerospace series Flange couplings@ up to 21 000 kPa Design standard Inch series (Edition 1)
PREN 9133-2016 Aerospace series Quality Management Systems Qualification Procedure for Aerospace Standard Products (Edition P 2)

ZA-SANS, Standard Series Gravimetry

SANS 315:2005 Milk - Determination of fat content - Gravimetric method (Reference method)
SANS 318:2005 Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method)

CU-NC, Standard Series Gravimetry

NC 90-07-34-1988 Standards System for Metrological Assurance. Standard Piston and Weight Gages, Type AZD. Methods and Means of Verification
NC 93-02-221-1986 Standards System for Environmental Protection. Atmosphere. Gravimetric Determination of Float Dust
NC 90-06-47-1988 Standards System for Metrological Assurance. Precooked Frozen Lobster. Determination of Mass. Precision
NC 90-01-64-1988 Standards System for Metrological Assurance. Micators. Methods and Means of Verification
NC 00-40-1985 National System for Standardizaron, Metrology and Quality Control. Guide for Drawing-Up of Verification Methods and Means Standards

The American Road & Transportation Builders Association, Standard Series Gravimetry

AASHTO T 121M/T 121-2016 Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
AASHTO T 121M/T 121-2011 Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
AASHTO T 121M/T 121-2015 Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
AASHTO T 295-2008 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
AASHTO T 213M/T 213-2011 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
AASHTO T 213M/T 213-2008 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
AASHTO T 121M/T 121-2009 Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
AASHTO T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
AASHTO T 65M/T 65-2013 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
AASHTO T 65M/T 65-2008 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

AENOR, Standard Series Gravimetry

UNE 58915-4:1992 SERIES LIFTING EQUIPMENT. BLOCK HOISTING. PART 4: CHAIN QUALITIES, SELECTION CRITERIA AND REQUIREMENTS.
UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
UNE-EN 9133:2006 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
UNE-EN 3149:1997 AEROSPACE SERIES. SHANK NUTS. INSTALLATION HOLES, 60o SWAGE, FLANGES. DESIGN STANDARD.

American Society for Testing and Materials (ASTM), Standard Series Gravimetry

ASTM C138/C138M-23 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-01a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-07 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-08 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-09 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-16a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-10 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-17a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM D3776-09 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776/D3776M-20 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D646-13 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight)
ASTM E1868-10 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM D3776/D3776M-09ae2 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776/D3776M-09a(2013) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776/D3776M-09a(2017) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM F205-94(2015) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM D558/D558M-19 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM D646-96(2007) Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM D646-96(2001) Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM D646-96 Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
ASTM D3627-96 Standard Test Method for Color of Cresylic Acids ("C" Series Standards)
ASTM D291-86(2002) Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
ASTM F2425-05a(2007) Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft
ASTM F2425-05a(2018) Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft
ASTM D3776/D3776M-09ae1 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776/D3776M-09a Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM F2544-06e1 Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
ASTM F2544-06 Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
ASTM D3776-07 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM B137-95(2000) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM B137-95(2021) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM B137-95(2014) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM A428/A428M-10(2014) Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM D3377-00 Standard Test Method for Weight Loss of Solventless Varnishes
ASTM D3377-96 Standard Test Method for Weight Loss of Solventless Varnishes
ASTM B137-95(2004) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM D3377-04 Standard Test Method for Weight Loss of Solventless Varnishes
ASTM D2756-02 Standard Test Method for Weight Loss of Electrical Insulating Varnishes
ASTM D2756-85(1998) Standard Test Method for Weight Loss of Electrical Insulating Varnishes
ASTM D291-07(2012) Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
ASTM D2756-07(2017) Standard Test Method for Weight Loss of Electrical Insulating Varnishes
ASTM D291-07 Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
ASTM D291-07e1 Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
ASTM D3377-04(2013) Standard Test Method for Weight Loss of Solventless Varnishes
ASTM ISO/ASTM 51401-03 Standard Practice for Use of a Dichromate Dosimetry System
ASTM C138/C138M-12a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM D7582-10e1 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM D3776-96(2002) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776-96 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D1252-95 Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
ASTM D1252-06(2020) Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
ASTM D1252-06(2012)e1 Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
ASTM D8108-21 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D8108-20 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM E53-02 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
ASTM E53-98 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
ASTM D3708-88(1993)e1 Standard Test Method for Weight of Wax Applied During Curtain Coating Operation
ASTM A630-16a Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM F205-94(2020) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM A630-16ae1 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM E1868-02 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E1868-04 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM D6980-12 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
ASTM E96/E96M-21 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E53-07 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
ASTM E96/E96M-22 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D6980-09 Test Method for Determination of Moisture in Plastics by Loss in Weight
ASTM A428/A428M-10(2019) Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM A428/A428M-21 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM D1252-06(2012) Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
ASTM ISO/ASTM 51401-02 Standard Practice for Use of a Dichromate Dosimetry System
ASTM ISO/ASTM 51401-13 Standard Practice for Use of a Dichromate Dosimetry System
ASTM ISO/ASTM51401-02 Standard Practice for Use of a Dichromate Dosimetry System
ASTM ISO/ASTM51401-03 Standard Practice for Use of a Dichromate Dosimetry System
ASTM ISO/ASTM51401-13 Standard Practice for Use of a Dichromate Dosimetry System
ASTM C29/C29M-97 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
ASTM D4898-90(2000)e1 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ASTM D2756-07 Standard Test Method for Weight Loss of Electrical Insulating Varnishes
ASTM B137-95(2009) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM D2756-07(2012) Standard Test Method for Weight Loss of Electrical Insulating Varnishes
ASTM C29/C29M-97(2003) Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
ASTM C29/C29M-17a Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
ASTM D4898-90(2010)e1 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ASTM D4898-16 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ASTM D6023-07 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
ASTM D6023-16 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
ASTM C138/C138M-14 Standard Test Method for Density 40;Unit Weight41;, Yield, and Air Content 40;Gravimetric41; of Concrete
ASTM C138/C138M-16 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-17 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM E2824-18 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method
ASTM C1616-05 Standard Test Method for Determining the Moisture Content of Inorganic Insulation Materials by Weight
ASTM E1641-04 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E2008-04 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2008-06 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM D4898-90(2010) Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ASTM D4281-95 Standard Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination
ASTM E1805-07 Standard Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry
ASTM E2824-18a Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetry
ASTM E1131-08(2014) Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1131-03 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM D8108-21e1 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D7232-06(2022) Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
ASTM A428/A428M-01 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM D1555M-00 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons [Metric]
ASTM D1555M-04e1 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
ASTM D1555M-04 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
ASTM D1555M-08e1 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
ASTM A630-03 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM G67-04 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
ASTM G67-13 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
ASTM E2402-05 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM C138/C138M-13a Standard Test Method for Density lpar;Unit Weightrpar;, Yield, and Air Content lpar;Gravimetricrpar; of Concrete
ASTM A754/A754M-11 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM E1568-03(2008)e1 Standard Test Method for the Determination of Gold in Activated Carbon by Fire Assay Gravimetry
ASTM E2824-11 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method
ASTM E53-07(2013) Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
ASTM D5352-95(2006) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM E1568-03 Standard Test Method for the Determination of Gold in Activated Carbon by Fire Assay Gravimetry
ASTM C1616-07e1 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
ASTM C1616-07 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
ASTM D5352-95 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D5352-95(2001) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM C1616-07(2012) Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
ASTM A428/A428M-95 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM D1252-00 Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
ASTM D1252-06 Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
ASTM D4797-12a Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking
ASTM D4797-17(2022) Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking
ASTM D4797-17 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking
ASTM D4797-12 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking
ASTM D7473/D7473M-21 Standard Test Method for Weight Attrition of Non-floating Plastic Materials by Open System Aquarium Incubations
ASTM D4253-00 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM D4253-00(2006) Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM D4254-00(2006)e1 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM D899-00(2007) Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D899-00 Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
ASTM D898-96 Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids
ASTM A428/A428M-10 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM E96/E96M-22ae1 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E96/E96M-22a Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E96/E96M-16 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM C771-14(2019) Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
ASTM D898-05 Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids
ASTM D6980-17 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
ASTM C29/C29M-09 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
ASTM C29/C29M-23 Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
ASTM C138/C138M-10b Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-12 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C138/C138M-13 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM D5062-96(2001) Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
ASTM E1568-93(1998) Standard Test Method for the Determination of Gold in Activated Carbon by Fire Assay Gravimetry
ASTM E1805-96 Standard Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry
ASTM E1805-02 Standard Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry
ASTM D5062-09 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
ASTM D2688-11 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
ASTM E1568-21 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry
ASTM E1805-21 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
ASTM D6822-02(2008) Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM D2980-71(1996) Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials
ASTM D2980-04 Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials
ASTM D2980-04(2010) Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials
ASTM A90/A90M-11 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-13 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM E247-01(2005) Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM E247-01 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM E247-96 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM D4254-00 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM D4254-00(2006) Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM E247-01(2015)e1 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM D1122-97a(2002) Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D1122-97a Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D1122-08 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D1122-22 Standard Test Method for Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM F2425-05 Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft
ASTM F2425-05a Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft
ASTM F2425-05a(2009) Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft
ASTM F2448-04(2007) Standard Practice for Manufacturer Quality Assurance System for Weight-Shift-Control Aircraft
ASTM F2448-04 Standard Practice for Manufacturer Quality Assurance System for Weight-Shift-Control Aircraft
ASTM F2448-04(2009) Standard Practice for Manufacturer Quality Assurance System for Weight-Shift-Control Aircraft
ASTM A630-98 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM D6995-05 Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)
ASTM D4694-96(2003) Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
ASTM C771-97 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
ASTM C771-03 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
ASTM F495-99a Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
ASTM F2277-17 Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
ASTM F495-99a(2019) Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
ASTM F495-99a(2011) Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
ASTM C29/C29M-17 Standard Test Method for Bulk Density (&x201c;Unit Weight&x201d;) and Voids in Aggregate
ASTM C771-14 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
ASTM C29/C29M-16 Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
ASTM D4694-09(2015) Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
ASTM A630-03(2014) Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM A630-16 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM D4001-93(1999) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D1556-00 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
ASTM D1556-07 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
ASTM D2688-94(1999)e1 Standard Test Methods for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Methods)
ASTM D4564-08e1 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method
ASTM D7232-06(2012) Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
ASTM E1568-13 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry
ASTM E1805-13 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
ASTM D1556/D1556M-15 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
ASTM D1556/D1556M-15e1 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
ASTM D2688-15e1 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
ASTM D2688-15 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
ASTM D4564-08 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method
ASTM E2403-23 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2824-23 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetry
ASTM D7232-06(2016) Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
ASTM D6023-15 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
ASTM A754/A754M-11(2016) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM ISO/ASTM 51275-04 Standard Practice for Use of a Radiochromic Film Dosimetry System
ASTM E1731-95(2001) Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
ASTM F2469-05 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D2167-94(2001) Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM E1731-11(2018) Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
ASTM C29/C29M-07 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
ASTM D5723-95 Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D7263-09(2018)e2 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D7263-09(2018) Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM F1165-15 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
ASTM D7263-09(2018)e1 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM F495-99a(2004) Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
ASTM C694-90a(1995) Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
ASTM A90/A90M-95a(1999) Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-01 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-21 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM D2980-02 Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials
ASTM C694-90a(2011)e1 Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
ASTM A90/A90M-13(2018) Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM E2402-11(2017) Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2402-19 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
ASTM D6906-03 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D2167-94 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM D6906-03(2010)e1 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D6906-11 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D2167-15 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM D2167-08 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM A754/A754M-21 Standard Test Method for Coating Weight [Mass] of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM A90/A90M-06 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A754/A754M-96(2004) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM A754/A754M-06 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM A754/A754M-96(2000) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM A90/A90M-09 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM C138/C138M-10a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM D5368-93 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM A754/A754M-18 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
ASTM D1555-04e1 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
ASTM D1555-04 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
ASTM D1555-04a Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
ASTM D558-03 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM D7263-09 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
ASTM D4001-20 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers by Light Scattering
ASTM D1555-09 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
ASTM D558-11 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM F2307-03 Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
ASTM F1887-98 Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
ASTM F1887-14(2019) Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
ASTM F1887-14(2019)e1 Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
ASTM D7473-12 Standard Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations
ASTM D6579-06 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
ASTM D5352-95(2012) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D3850-94(2000) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM B923-02 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM D3850-94(2006) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM E2403-04 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E1731-06 Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
ASTM E2403-06 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2043-99(2017) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM F2469-20 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM E316-11 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry
ASTM E2403-06(2012) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2043-99(2012) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM D3850-12 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM C694-90a(2006) Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
ASTM ISO/ASTM51631-02 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations
ASTM D6331-98(2005) Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-98 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM E247-01(2010) Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM D6331-13 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-16 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D7077-04 Standard Test Method for Evaluation of Drop Size by weight of Solutions and Suspensions
ASTM A90/A90M-07 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM E1560-06 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
ASTM D7263-21 Standard Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens
ASTM D2878-95(2000)e1 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM D5723-95(2010) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM E159-10 Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
ASTM D5062-96 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
ASTM E1560-11 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
ASTM E1560-18 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers

European Association of Aerospace Industries, Standard Series Gravimetry

AECMA PREN 3582-1991 Aerospace Series Standard-Weight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 21000 kPa with 24 Degree Fitting in Titanium Product Standard
AECMA PREN 3581-1991 Aerospace Series Standard-Weight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 21000 kPa with 24 Degree Fitting in Corrosion Resistant Steel Product Standard
AECMA PREN 3579-1991 Aerospace Series Standard-Weight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 21000 kPa with 8 Degree 30 Feet Fitting in Corrosion-Resistant Steel Product Standard
AECMA PREN 3580-1991 Aerospace Series Standard-Weight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 21000 kPa with 8 Degree 30' Fitting in Titanium Product Standard Issue P 1
AECMA PREN 4618-2004 Aerospace series Aircraft internal air quality standards, criteria and determination methods Edition P 1
AECMA PREN 9133-2002 Aerospace series Quality management systems Qualification Procedure for Aerospace Standard Parts Edition P 1; Supersedes EN 3042: 1991 [Replaced: ASD-STAN PREN 3042]
AECMA PREN 2559-1988 Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Resin and Fibre Content and the Mass of Fibre Per Unit Area Issue P 1

AASHTO - American Association of State Highway and Transportation Officials, Standard Series Gravimetry

T 121M/T 121-2012 Standard Method of Test for Density (Unit Weight)@ Yield@ and Air Content (Gravimetric) of Concrete
T 121M/T 121-2005 Standard Method of Test for Density (Unit Weight)@ Yield@ and Air Content (Gravimetric) of Concrete
T 121M/T 121-2016 Standard Method of Test for Density (Unit Weight)@ Yield@ and Air Content (Gravimetric) of Concrete
T 121M/T 121-2011 Standard Method of Test for Density (Unit Weight)@ Yield@ and Air Content (Gravimetric) of Concrete
T 121M/T 121-2017 Standard Method of Test for Density (Unit Weight)@ Yield@ and Air Content (Gravimetric) of Concrete
T 121M/T 121-2009 Standard Method of Test for Density (Unit Weight)@ Yield@ and Air Content (Gravimetric) of Concrete
T 121M/T 121-2015 Standard Method of Test for Density (Unit Weight)@ Yield@ and Air Content (Gravimetric) of Concrete
T 213M/T 213-2008 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
T 213M/T 213-2011 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
T 213M/T 213-2003 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
T121-1986 Standard Method of Test for Weight per Cubic Foot@ Yield@ and Air Content (Gravimetric) of Concrete (ASTM C138-81 E1)
T 19M/T 19-2009 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
T 19M/T 19-2000 Standard Method of Test for Bulk Density ( Unit Weight ) and Voids in Aggregate
T 65-1983 Standard Method of Test for Weight of Coating on Zinc-Coated (Galvanized) Iron or Steel Articles (ASTM A90-81)
T 65M/T 65-2006 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 65M/T 65-2008 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 65M/T 65-2011 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 65M/T 65-2013 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 213M/T 213-1997 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles (Twentieth Edition; ASTM A428/A428M-95)

CN-STDBOOK, Standard Series Gravimetry

图书 3-9533 Standardization methods for standardization of vocational education series textbooks

Danish Standards Foundation, Standard Series Gravimetry

DS/EN 4617:2006 Aerospace series - Recommended practices for standardising company standards
DS/EN 4618:2009 Aerospace series - Aircraft internal air quality standards, criteria and determination methods
DS/EN 9133:2005 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
DS/EN 2346-004:2006 Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard
DS/ISO 5725-2/Corr.1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

Lithuanian Standards Office , Standard Series Gravimetry

LST EN 4617-2006 Aerospace series - Recommended practices for standardising company standards
LST EN 4618-2010 Aerospace series - Aircraft internal air quality standards, criteria and determination methods
LST EN 14907-2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
LST EN 2346-004-2006 Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 C and 260 C - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard
LST EN 9133-2005 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts

Group Standards of the People's Republic of China, Standard Series Gravimetry

T/SZSSA 0002-2023 Security company important information system capacity management standard

CEN - European Committee for Standardization, Standard Series Gravimetry

PREN 4618-2013 Aerospace series - Aircraft internal air quality standards@ criteria and determination methods
PREN 4666-2013 Aerospace series - Aircraft integrated air quality and pressure standards@ criteria and determination methods
EN 9133:2018 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products

Professional Standard - Urban Construction, Standard Series Gravimetry

CJ 26.7-1991 Water quality inspection method of urban sewage - Determination gravimetric method of standard oil
CJ 26.5-1991 Municipal sewage water quality inspection method Standard gravimetric method for total solids
CJ 26.11-1991 Municipal sewage water quality inspection method standard sulfate gravimetric method
CJ 26.2-1991 Municipal sewage water quality examination method standard gravimetric method for the determination of suspended solids
CJ 26.6-1991 Municipal sewage water quality inspection method standard Determination of chemical oxygen demand Potassium dichromate method

American National Standards Institute （ANSI), Standard Series Gravimetry

ANSI/SJI CJCOSP-1.0-2006 Standard Specifications and Code of Standard Practice for Composite Steel Joists, CJ-Series

National Metrological Technical Specifications of the People's Republic of China, Standard Series Gravimetry

JJF 1028-1991 Standard Method for Using the Silver Dichromate Dosimeter to Measure γ-Ray Absorbed Dose in Water
JJF 1018-1990 Standard Method for Using the Potassium(silver)Dichromate Dosimeter to Measure γ-ray Absorbed Dose in Water

Korean Agency for Technology and Standards (KATS), Standard Series Gravimetry

KS F 2462-2016 Standard test method for unit weight of structural light weight concrete
KS F 2810-2-2012 Field measurements of floor impact sound insulation of buildings-Part 2:Method using standard heavy impact sources

PT-IPQ, Standard Series Gravimetry

NP 4373-1999 Solid fuels.Coals.Determination of total moisture by the indirect gravimetric method(ASTM method)
NP 4323-1999 Solid fuels.Coals.Determination of total moisture by the indirect gravimetric method(ISO method)
NP 4372-1999 Solid fuels Coals and cokes Determination of moisture in the analysis sample by the indirect gravimetric method (ASTMmethod)
NP 1011-1989 SOLID FUELS Coals Determination of moisture in the analysis sample Direct gravimetric method ISO method

American Society of Mechanical Engineers (ASME), Standard Series Gravimetry

ASME B1.22M-1985 Gages and Gaging for MJ Series Metric Screw Threads Revision of ANSI B1.22-1978

International Electrotechnical Commission (IEC), Standard Series Gravimetry

IEC TR 63400:2021 Nuclear facilities - Instrumentation, control and electrical power systems important to safety - Structure of the IEC SC 45A standards series

International Telecommunication Union (ITU), Standard Series Gravimetry

ITU-T VOLUME V Telephone Transmission Quality Series P Recommendations (Study Group XII)

Professional Standard - Recommended Standards for Engineering Construction, Standard Series Gravimetry

CECS 33-1991 THE SELECTION STANDARD FOR SERIES OF VOLTAGE AND CAPACITY OF SHUNT CAPACITOR

Professional Standard - Tobacco, Standard Series Gravimetry

YC/T 169.8-2002 Testing physical and chemical characteristics of tow for cigarette----Part 8: Moisture content
YC/T 169.9-2002 Testing physical and chemical characteristics of tow for cigarette----Part 9: Lubricant content
YC/T 169.10-2002 Testing physical and chemical characteristics of tow for cigarette----Part 10: Residual acetone content
YC/T 169.11-2002 Testing physical and chemical characteristics of tow for cigarette----Part 11: Titanium dioxide content

NATO - North Atlantic Treaty Organization, Standard Series Gravimetry

AETP-6-1987 Standard Methods of Measuring IFF System Performance (To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int. For additio

IX-FAO, Standard Series Gravimetry

CODEX STAN 203-1995(En) International Codex Alimentarius Standard Low Energy Formula Foods for Weight Loss
CODEX STAN 203-1995(Ch) International Codex Alimentarius Standard Low Energy Formula Foods for Weight Loss

IT-UNI, Standard Series Gravimetry

UNI 6808-1972
UNI ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

VE-FONDONORMA, Standard Series Gravimetry

Institute of Electrical and Electronics Engineers (IEEE), Standard Series Gravimetry

IEEE 193-1971 IEEE Standard Method for Measurement of Weighted Peak Flutter of Sound Recording and Reproducing Equipment
ANSI/IEEE Std 193-1971 IEEE Standard Method for Measurement of Weighted Peak Flutter of Sound Recording and Reproducing Equipment

Standard Association of Australia （SAA）, Standard Series Gravimetry

AS/NZS ISO/IEC 14143.6:2006 Information technology - Software measurement - Functional size measurement - Guide for use of ISO/IEC 14143 series and related International Standards
AS 3501:1987 Parallel screw threads of Whitworth form (BSW and BSF) and associated gauges and gauging practice

NZ-SNZ, Standard Series Gravimetry

NZSS GP 49-1963 STANDARD SPECIFICATION (GOVERNMENT PURCHASING SERIES) FOR STEAM-HEATED HOT-FOOOD SERVICE COUNTERS (BAIN-MARIE TYPE) WITH CLIPBOARDS

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard Series Gravimetry

GB/T 16639-2008 Standard method for use of an alanine-EPR dosimetry system
GB/T 18491.6-2010 Information technology.Software measurement.Functional size measurement.Part 6:Guide for use of GB/T 18491 series and related standards
GB/T 6598-1986 Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
GB 6598-1986 Determination of Weight Average Molecular Weight of Polystyrene Standard Samples by Small Angle Laser Light Scattering Method

未注明发布机构, Standard Series Gravimetry

BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

API - American Petroleum Institute, Standard Series Gravimetry

API MPMS 9.1-2002 Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Standard Test Method for Density@ Relative Density (Specific Gravity)@ or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method (Second Edi
API MPMS 4.9.4-2010 Manual of Petroleum Measurement Standards Chapter 4—Proving Systems Section 9—Methods of Calibration for Displacement and Volumetric Tank Provers Part 4—Determination of the Volume of Displacement and Tank Provers by the Gravimetric Method of Calibration

ES-AENOR, Standard Series Gravimetry

AT-ON, Standard Series Gravimetry

OENORM EN 3375-011-2021 Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Light weight - Type KL - Product standard

National Electrical Manufacturers Association（NEMA), Standard Series Gravimetry

NEMA C119.0-2015 Electric Connectors - Testing Methods and Equipment Common to the ANSI C119 Family of Standards
NEMA C119.0-2015(1) Electric Connectors - Testing Methods and Equipment Common to the ANSI C119 Family of Standards

International Organization for Standardization (ISO), Standard Series Gravimetry

ISO 6142:2001/Amd 1:2009 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method; Amendment 1: Liquid introduction