ZH
RU
ES

The use of electronic probes

The use of electronic probes, Total:334 items.

In the international standard classification, The use of electronic probes involves: Optics and optical measurements, Optical equipment, Electrical accessories, Analytical chemistry, Radiation measurements, Test conditions and procedures in general, Thermodynamics and temperature measurements, Testing of metals, Semiconducting materials, Electricity. Magnetism. Electrical and magnetic measurements, Ceramics, Non-ferrous metals, Conducting materials, Plastics, Soil quality. Pedology, Electromechanical components for electronic and telecommunications equipment, Road vehicle systems, Rubber and plastics products, Water quality, Insulation, On-board equipment and instruments, Audio, video and audiovisual engineering, Domestic electrical appliances in general, Electronic display devices, Farm buildings, structures and installations, Automatic controls for household use, Radiation protection, Components and accessories for telecommunications equipment, Electrical wires and cables, Medical equipment, Electrical and electronic testing, Domestic safety, Construction materials, Kitchen equipment, Linear and angular measurements, Electrical engineering in general, Body care equipment, Fishing and fish breeding, Diagnostic, maintenance and test equipment, Optoelectronics. Laser equipment, Power transmission and distribution networks.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The use of electronic probes

GB/T 15075-1994 Method for testing EPMA instrument
GB/T 15244-2002 Quantitative analysis of glass by electron probe microanalysis
GB/T 4930-1993 General specification of electron probe microanalysis standard specimen
GB/T 17363-1998 Method of quantitative electron probe microanalysis on gold products
GB/T 15617-2002 Quantitative analysis of silicate minerals by electron probe microanalysis
GB/T 15245-2002 Quantitative analysis of rare earth element(REE) oxides by electron probe microanalysis(EPMA)
GB/T 15246-2002 Quantitative analysis of sulfide minerals by electron probe microanalysis
GB/T 15616-1995 Qantitative method for electron probe microanalysis of metals and alloys
GB/T 15616-2008 Quantitative method for electron probe microanalysis of metals and alloys
GB/T 17366-1998 Methods of mineral and rock specimen preparation for EPMA
GB/T 17360-1998 Method of quantitative electron probe microanalysis on low contents of Si and Mn in steels
GB/T 17506-1998 The method of electron probe micro analysis as corrosive layer on ferrous metals of ship
GB/T 17360-2008 Quantitative analysis method of low content Si and Mn in steel with electron probe microanalysis
GB/T 17506-2008 The analysis method of corrosive layer on ferrous metals of ship with EPMA
GB/T 17365-1998 Method of preparation for samples of metal and alloy in electron probe microanalysis
GB/T 15246-2022 Microbeam analysis—Quantitative analysis of sulfide minerals by electron probe microanalysis
GB/T 15247-2008 Microbeam analysis.Electron probe microanalysis.Guidelines for determining the carbon content of steels using calibration curve method
GB/T 14141-2009 Test method for sheet resistance of silicon epitaxial,diffused and ion-implanted layers using a collinear four-probe array
GB/T 15247-1994 Electron probe quantitative analysis method of carbon in carbon steel and low alloy steel--Sensitivity curve method (detection limit method)
GB 16915.2-2012 Switches for household and similar fixed electrical installations.Part 2-1:Particular requirements.Electronic switches
GB/T 16915.2-2012 Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches

German Institute for Standardization, The use of electronic probes

DIN 6800-1:2016-08 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 1: General
DIN 6800-1:2016 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 1: General
DIN 6800-1:1980 Procedures in dosimetry; principles of photon and electron dosimetry with probe-type detectors
DIN 6800-4:2000 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 4: Film dosimetry
DIN 6800-5:2005 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 5: Thermoluminescence dosimetry
DIN 50431:1988 Testing of semiconductor materials; measurement of the resistivity of silicon or germanium single crystals by means of the four probe/direct current method with collinear array
DIN ISO 16592:2015 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method (ISO 16592:2012)
DIN EN 60512-16-1:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage (IEC 60512-16-1:2008); German version EN 60512-16-1:2008 / Note: DIN IEC 60512-8 (1994-05) remains valid al...
DIN EN 60512-16-1:2009 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage (IEC 60512-16-1:2008); German version EN 60512-16-1:2008
DIN 6800-2 Berichtigung 1:2010 Procedures of dosimetry with probe type detectors for photon and electron radiation - Part 2: Ionization chamber dosimetry of high energy photon and electron radiation, Corrigendum to DIN 6800-2:2008-03
DIN 6800-2:2008 Procedures of dosimetry with probe type detectors for photon and electron radiation - Part 2: Ionization chamber dosimetry of high energy photon and electron radiation
DIN EN 50049-1:1998 Domestic and similar electronic equipment interconnection requirements: Peritelevision connector; German version EN 50049-1:1997 + A1:1998
DIN EN 1071-4:2006-05 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA); German version EN 1071-4:2006
DIN 50435:1988 Testing of semiconductor materials; determination of the radial resistivity variation of silicon or germanium slices by means of the four-probe/direct current method
DIN 48016:1970-11 Screwed cap for mounting pin type insulators for overhead power lines up to 1000 V
DIN EN ISO 11608-4:2022-09 Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics (ISO 11608-4:2022); German version EN ISO 11608-4:2022
DIN EN ISO 28057:2020 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy (ISO 28057:2014)
DIN EN 50157-1:1999 Domestic and similar electronic equipment interconnection requirements: AV.link - Part 1: General; German version EN 50157-1:1998
DIN EN 62220-1-3:2011-04 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging (IEC 62220-1-3:2008); German version EN 62220-1-3:2008
DIN EN 62220-1-2:2009-02 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-2: Determination of the detective quantum efficiency - Detectors used in mammography (IEC 62220-1-2:2007); German version EN 62220-1-2:2007
DIN EN 62220-1-1:2021-11 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-1: Determination of the detective quantum efficiency - Detectors used in radiographic imaging (IEC 62220-1-1:2015); German version EN 62220-1-1:2015
DIN EN 60669-2-1:2010 Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches (IEC 60669-2-1:2002, modified + A1:2008, modified); German version EN 60669-2-1:2004 + A1:2009
DIN EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA) English version of DIN EN 1071-4:2006-05
DIN EN ISO 11608-4:2016 Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics (ISO/DIS 11608-4:2016); German and English version prEN ISO 11608-4:2016
DIN EN 50157-2-3:1999 Domestic and similar electronic equipment interconnection requirements: AV.link - Part 2-3: System oriented application; German version EN 50157-2-3:1998
DIN EN 62220-1-2:2009 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-2: Determination of the detective quantum efficiency - Detectors used in mammography (IEC 62220-1-2:2007); German version EN 62220-1-2:2007

National Metrological Technical Specifications of the People's Republic of China, The use of electronic probes

JJF 1029-1991 The Technical Norm for Development of Certified Reference Materied Used in Quantitative Analysis of Electron Microprobe

Professional Standard - Machinery, The use of electronic probes

JB/T 12074-2014 Quantitative analysis of composition metal.Electron probe microanalysis

Association Francaise de Normalisation, The use of electronic probes

NF ISO 11938:2012 Analyse par microfaisceaux - Analyse par microsonde électronique (microsonde de Castaing) - Méthodes d'analyse par cartographie élémentaire en utilisant la spectrométrie à dispersion de longueur d'onde
NF X21-007:2008 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steel using a calibration curve method.
NF X21-002:2007 Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy.
NF C93-400-16-1*NF EN 60512-16-1:2008 Connectors for electronic equipment - Tests and measurements - Part 16-1 : mechanical tests on contacts and terminations - Test 16a : probe damage
NF X21-013*NF ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy.
NF X21-006:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy.
NF EN 1071-4:2006 Céramiques techniques avancées - Méthodes d'essai pour revêtements céramiques - Partie 4 : détermination de la composition chimique par microanalyse avec sonde électronique (MASE)
NF EN ISO 11608-4:2022 Systèmes d'injection à aiguille pour usage médical - Exigences et méthodes d'essai - Partie 4 : systèmes d'injection à aiguille contenant de l'électronique
NF M60-565:2014 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
NF C47-746/A11:2005 Automatic electrical controls for household and similar use - Part 2-16 : particular requirements for automatic electrical water level controls of the float type for household and similar applications.
NF EN 60512-16-1:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-1 : essais mécaniques des contacts et des sorties - Essai 16a : endommagement par sonde d'essai
NF C42-725:1994 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-031 : particular requirements for hand-held probe assemblies for electrical measurement and test.
NF C73-858*NF EN 60335-2-58:2005 Household and similar electrical appliances - Safety - Part 2 : particular requirements for commercial electric dishwashing machines
NF C47-744/A2:2009 Automatic electrical controls for household and similar use - Part 2-14 : particular requirements for electric actuators.
NF C73-876:2001 Safety of household and similar electrical apppliances - Part 2-76 : particular requirements for electric fence energizers.
NF C42-725:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031 : safety requirements for hand-held probe assemblies for electrical measurement and test.
NF C42-020-031*NF EN 61010-031:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031 : safety requirements for hand-held probe assemblies for electrical measurement and test
NF C61-111/A2:2002 Switches for household and similar fixed electrical installations - Part 2-1 : particular requirements - Electronic switches.
NF C73-808:2005 Household and similar electrical appliances- Safety - Part 2-8 : particular requirements for shavers, hair clippers and similar appliances.
NF C74-220-1-3*NF EN 62220-1-3:2008 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3 : determination of the detective quantum efficiency - Detectors used in dynamic imaging.
NF EN 61674:2013 Appareils électromédicaux - Dosimètres à chambres d'ionisation et/ou à détecteurs à semi-conducteurs utilisés en imagerie de diagnostic à rayonnement X
NF S31-008*NF EN IEC 63008:2020 Household and similar electrical appliances - Accessibility of control elements, doors, lids, drawers and handles
NF C73-808/A1:2006 Household and similar electrical appliances - Safety - Part 2-8 : particular requirements for shavers, hair clippers and similar appliances.
NF A92-801-4*NF EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4 : determination of chemical composition by electron probe microanalysis (EPMA).
NF C74-204/A1:2006 Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging
NF C66-331*NF EN 60305:1996 Insulators for overhead lines with a nominal voltage above 1 kv. Ceramic or glass insulator units for A.C. systems. Characteristics of insulator units of the cap and pin type.
NF C66-331*NF EN IEC 60305:2021 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for AC systems - Characteristics of insulator units of the cap and pin type
NF C61-111:2000 Switches for household and similar fixed-electrical installations - Part 2 : particular requirements - Section 1 : electronic switches.

British Standards Institution (BSI), The use of electronic probes

BS ISO 13083:2015 Surface chemical analysis. Scanning probe microscopy. Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
19/30394914 DC BS ISO 15632. Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energydispersive X-ray spectrometers for use in electron probe microscope or an electron probe microanalyser (EPMA)
BS ISO 16592:2012 Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
BS ISO 19463:2018 Microbeam analysis. Electron probe microanalyser (EPMA). Guidelines for performing quality assurance procedures
BS ISO 11938:2013 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
BS EN 60512-16-1:2008 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations — Test 16a: Probe damage
BS EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Determination of chemical composition by electron probe microanalysis (EPMA)
BS ISO 11938:2012 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
BS ISO 23692:2021 Microbeam analysis. Electron probe microanalysis. Quantitative analysis of Mn dendritic segregation in continuously cast steel product
BS ISO 17470:2014 Microbeam analysis. Electron probe microanalysis. Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
20/30393735 DC BS ISO 23692. Microbeam analysis. Electron probe microanalysis. Quantitative analysis of Mn dendritic segregation in continuously cast steel product
BS ISO 15632:2012 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
BS ISO 15632:2021 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
BS ISO 22489:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
BS ISO 22489:2016 Microbeam analysis. Electron probe microanalysis. Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
BS ISO 13095:2014 Surface Chemical Analysis. Atomic force microscopy. Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement
BS EN 60335-2-76:2005+A2:2015 Household and similar electrical appliances. Safety. Particular requirements for electric fence energizers
BS EN IEC 60335-2-76:2021+A11:2021 Household and similar electrical appliances. Safety - Particular requirements for electric fence energizers
BS EN 60730-2-16:1998 Automatic electrical controls for household and similar use - Particular requirements for automatic electrical water level controls of the float type for household and similar applications
BS ISO 28057:2014 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
BS EN ISO 28057:2021 Clinical dosimetry. Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
BS ISO 14594:2003 Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
BS ISO 14594:2014 Microbeam analysis. Electron probe microanalysis. Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
BS EN 62220-1-3:2008 Medical electrical equipment — Characteristics of digital X-ray imaging devices — Part 1-3: Determination of the detective quantum efficiency — Detectors used in dynamic imaging
BS 6068-2.41:1993 Water quality. Physical, chemical and biochemical methods. Determination of fluoride: electrochemical probe method for potable and lightly polluted water
BS EN ISO 11608-4:2022 Tracked Changes. Needle-based injection systems for medical use. Requirements and test methods. Needle-based injection systems containing electronics
BS EN 60335-2-8:1996 Specification for safety of household and similar electrical appliances - Particular requirements - Shavers, hair clippers and similar appliances
BS EN 61010-031:2015+A1:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and measurement
BS EN 60335-2-17:2013+A1:2020 Household and similar electrical appliances. Safety. Particular requirements for blankets, pads, clothing and similar flexible heating appliances
BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
BS EN 62220-1-1:2015 Tracked Changes. Medical electrical equipment. Characteristics of digital x-ray imaging devices. Determination of the detective quantum efficiency. Detectors used in radiographic imaging
16/30273296 DC BS EN ISO 11608-4. Needle-based injection systems for medical use. Requirements and test methods. Part 4. Needle-based injection systems containing electronics
20/30387730 DC BS EN ISO 11608-4. Needle-based injection systems for medical use. Requirements and test methods. Part 4. Needle-based injection systems containing electronics
BS EN IEC 63008:2020 Household and similar electrical appliances. Accessibility of control elements, doors, lids, drawers and handles
BS QC 720105:1997 Harmonized system of quality assessment for electronic components - Semiconductor devices - Optoelectronic devices - Blank detail specification for pin-photodiodes with/without pigtail, for fibre optic systems or subsystems
19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method

International Organization for Standardization (ISO), The use of electronic probes

ISO 13083:2015 Surface chemical analysis - Scanning probe microscopy - Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
ISO/WD TR 23683:2023 Surface chemical analysis — scanning probe microscopy — Guideline for experimental quantification of carrier concentration in semiconductor devices by using electric scanning probe microscopy
ISO 16592:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
ISO 16592:2012 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
ISO 19463:2018 Microbeam analysis - Electron probe microanalyser (EPMA) - Guidelines for performing quality assurance procedures
ISO 23692:2021 Microbeam analysis - Electron probe microanalysis - Quantitative analysis of Mn dendritic segregation in continuously cast steel product
ISO 17470:2014 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
ISO 17470:2004 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
ISO 14594:2003/Cor 1:2009 Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy; Technical Corrigendum 1
ISO 22489:2006 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
ISO 22489:2016 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
ISO 13095:2014 Surface Chemical Analysis - Atomic force microscopy - Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement
ISO 28057:2014 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
ISO 14594:2003 Analyse par microfaisceaux - Analyse par microsonde électronique (Microsonde de Castaing) - Lignes directrices pour la détermination des paramètres expérimentaux pour la spectrométrie à dispersion de longueur d'onde
ISO 14594:2014 Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
ISO 11608-4:2022 Needle-based injection systems for medical use — Requirements and test methods — Part 4: Needle-based injection systems containing electronics
ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
ISO/TR 10305-2:2003 Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz

American Society for Testing and Materials (ASTM), The use of electronic probes

ASTM E2730-21 Standard Guide for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
ASTM E2730-22 Standard Guide for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
ASTM E2730-10(2015)e1 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
ASTM E2730-10 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
ASTM B667-97(2003)e1 Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
ASTM B667-97(2019) Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
ASTM B667-97(2014) Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
ASTM B667-97(2009) Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
ASTM F397-93(1999) Standard Test Method for Resistivity of Silicon Bars Using a Two-Point Probe
ASTM D8153-22 Standard Test Method for Determination of Soil Water Contents Using a Dielectric Permittivity Probe
ASTM F1392-00 Standard Test Method for Determining Net Carrier Density Profiles in Silicon Wafers by Capacitance-Voltage Measurements With a Mercury Probe
ASTM D5220-02 Standard Test Method for Water Content of Soil and Rock In-Place by the Neutron Depth Probe Method
ASTM D5220-92(1997) Standard Test Method for Water Content of Soil and Rock In-Place by the Neutron Depth Probe Method
ASTM F390-11 Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
ASTM E721-07 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
ASTM D5334-14 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
ASTM D5220-08 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
ASTM F1393-92(1997) Standard Test Method for Determining Net Carrier Density in Silicon Wafers by Miller Feedback Profiler Measurements With a Mercury Probe
ASTM E720-04e1 Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
ASTM E720-04 Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
ASTM E720-02 Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
ASTM E720-08 Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
ASTM F374-00a Standard Test Method for Sheet Resistance of Silicon Epitaxial, Diffused, Polysilicon, and Ion-implanted Layers Using an In-Line Four-Point Probe with the Single-Configuration Procedure
ASTM F1711-96(2016) Standard Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method
ASTM B624-99 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
ASTM D8231-19 Standard Practice for the Use of a Low Voltage Electronic Scanning System for Detecting and Locating Breaches in Roofing and Waterproofing Membranes
ASTM E1140-95(2005) Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography
ASTM E1140-95(2010)e1 Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography
ASTM E2730-10(2015)e2 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits

国家市场监督管理总局、中国国家标准化管理委员会, The use of electronic probes

GB/T 17360-2020 Microbeam analysis—Method of quantitative determination for low contents of silicon and manganese in steels using electron probe microanalyzer

Korean Agency for Technology and Standards (KATS), The use of electronic probes

KS D ISO 16592:2011 Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS D ISO 16592-2011(2016) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS D ISO 16592-2011(2021) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS D ISO 22489:2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
KS C 1611-1982(2017) Electronic Self-Balancing Recorders for Industrial Use
KS D ISO 15632:2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
KS I ISO 10359-1-2006(2011) Water quality－Determination of fluoride－Part 1：Electrochemical probe method for potable and lightly polluted water
KS D ISO 22489:2012 Microbeam analysis－Electron probe microanalysis－Quantitative point analysis for bulk specimens using wavelength-dispersive x-ray spectroscopy
KS D ISO 14594:2012 Microbeam analysis－Electron probe microanalysis－Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
KS C IEC 60730-2-16:2003 Automatic electrical controls for household and similar use-Part 2-16:Particular requirements for automatic electrical water level controls of the float type for household and similar applications
KS C IEC 60335-2-86:2007 Household and similar electrical appliances－Safety－Part 2－86：Particular requirements for electric fishing machines
KS C IEC 60335-2-86:2017 Household and similar electrical appliances－Safety－Part 2－86：Particular requirements for electric fishing machines
KS C IEC 60669-2-1-2005(2015) Switches for household and similar fixed electrical installations－ Part 2－1：Particular requirements－Electronic switches
KS C IEC 62220-1-1:2020 Medical electrical equipment — Characteristics of digital X-ray imaging devices — Part 1-1: Determination of the detective quantum efficiency — Detectors used in radiographic imaging
KS C IEC 60335-2-8:2013 Household and similar electrical appliances-Safety-Part 2-8:Particular requirements for shavers, hair clippers and similar appliances
KS C IEC 60335-2-8:2007 Household and similar electrical appliances-Safety-Part 2-8:Particular requirements for shavers, hair clippers and similar appliances
KS C IEC 60730-2-14:2003 Automatic electrical controls for household and similar use－Part 2－14：Particular requirements for electric actuators
KS C IEC 62220-1-2:2020 Medical electrical equipment — Characteristics of digital X-ray imaging devices — Part 1-2: Determination of the detective quantum efficiency — Detectors used in mammography

US-FCR, The use of electronic probes

FCR NE-F-11-4T-1972 DETERMINATION OF A FIGURE OF MERIT FOR PUO2-UO2 FUEL PELLET HOMOGENEITY BY USE OF AN ELECTRON MICROPROBE (INACTIVE FOR NEW DESIGN)

Japanese Industrial Standards Committee (JISC), The use of electronic probes

JIS K 0189:2013 Microbeam analysis.Electron probe microanalysis.Determination of experimental parameters for wavelength dispersive X-ray spectroscopy
JIS H 0602:1995 Testing method of resistivity for silicon crystals and silicon wafers with four-point probe
JIS K 7194:1994 Testing method for resistivity of conductive plastics with a four-point probe array
JIS K 0190:2010 Microbeam analysis -- Electron probe microanalysis -- Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
JIS R 1637:1998 Test method for resistivity of conductive fine ceramic thin films with a four-point probe array
JIS C 5402-16-1:2014 Connectors for electronic equipment -- Tests and measurements -- Part 16-1: Mechanical tests on contacts and terminations -- Test 16a: Probe damage
JIS C 9335-2-209:2007 Safety of household and similar electrical appliances -- Part 2-209: Particular requirements for electric therapy apparatus for home use
JIS C 9335-2-209:2009 Safety of household and similar electrical appliances -- Part 2-209: Particular requirements for electric therapy apparatus for home use
JIS C 1010-2-31:1998 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-31: Particular requirements for hand-held probe assemblies for electrical measurement and test
JIS C 9335-2-209:2004 Safety of household and similar electrical appliances -- Part 2-209: Particular requirements for electric therapy apparatus for home use
JIS C 8281-2-1:2004 Switches for household and similar fixed electrical installations -- Part 2-1: Particular requirements -- Electronic switches
JIS C 8281-2-1:2012 Switches for household and similar fixed electrical installations -- Part 2-1: Particular requirements -- Electronic switches
JIS C 8281-2-1:2019 Switches for household and similar fixed electrical installations -- Part 2-1: Particular requirements -- Electronic switches
JIS C 9335-2-209 AMD 1:2006 Safety of household and similar electrical appliances -- Part 2-209: Particular requirements for electric therapy apparatus for home use (Amendment 1)

AASHTO - American Association of State Highway and Transportation Officials, The use of electronic probes

TP 55-1998 Standard Method of Test for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe
TP55-1998 Standard Test Method for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe
T 332-2007 Standard Method of Test for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe

The American Road & Transportation Builders Association, The use of electronic probes

AASHTO T 332-2007 Standard Method of Test for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe
AASHTO TP55-1998 Standard Test Method for Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe 2000 Edition

IN-BIS, The use of electronic probes

IS 13765-1993 Pliers and nippers for electronics. Single purpose pliers. Flat nose pliers. Specification
IS 13764-1993 Pliers and nippers for electronics. Single purpose pliers. Round nose pliers. Specification
IS 13763-1993 Pliers and nippers for electronics. Single purpose nippers. Oblique cutting nippers. Specification
IS 13766-1993 Pliers and nippers for electronics. Single purpose pliers. Snipe nose pliers. Specification
IS 13761-1993 Pliers and nippers for electronics. Single purpose nippers. End cutting nippers. Specification
IS 13762-1993 Pliers and nippers for electronics. Single purpose nippers. Diagonal cutting nippers. Specification
IS 616-1986
IS 12195 Pt.1/Sec.1-1987

CZ-CSN, The use of electronic probes

CSN 50 3176-1960 Insulating board for electrical purposes (average quality)
CSN EN 60065-1994 Safety requirements for mains operated electronic and related apparatus for household and similar general use
CSN 36 7004-1972 Safety requirements for battery operated electronic and related equipment for domestig and similar general use
CSN 36 7000-1988 Safety requirement and test methods formains operated electronic and related equipment for household and similar egneral use

KR-KS, The use of electronic probes

KS D ISO 22489-2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
KS D ISO 15632-2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
KS D ISO 22489-2018(2023) Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
KS C IEC 62220-1-1-2020 Medical electrical equipment — Characteristics of digital X-ray imaging devices — Part 1-1: Determination of the detective quantum efficiency — Detectors used in radiographic imaging
KS C IEC 62220-1-2-2020 Medical electrical equipment — Characteristics of digital X-ray imaging devices — Part 1-2: Determination of the detective quantum efficiency — Detectors used in mammography

AENOR, The use of electronic probes

UNE 16543:2007 Pliers and nippers for electronics. Single purpose nippers. Cutting nippers. Technical especifications.
UNE 16544:2006 Pliers and nippers for electronics. Single purpose pliers. Pliers for gripping and manipulating. Technical especifications.
UNE 77044-1:2002 Water quality -- Determination of fluoride -- Part 1: Electrochemical probe method for potable and lightly polluted water.
UNE-EN 62220-1-3:2009 Medical electrical equipment - Characteristics of digital X-ray imaging devices -- Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging
UNE-EN 60669-2-1:2005/A12:2011 Switches for household and similar fixed electrical installations -- Part 2-1: Particular requirements - Electronic switches
UNE-EN 60669-2-1:2005/A1:2010 Switches for household and similar fixed electrical installations -- Part 2-1: Particular requirements - Electronic switches
UNE-EN 60669-2-1:2005 Switches for household and similar fixed electrical installations -- Part 2-1: Particular requirements - Electronic switches

ES-UNE, The use of electronic probes

UNE-EN 60512-16-1:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage (Endorsed by AENOR in November of 2008.)
UNE-EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA) (Endorsed by AENOR in April of 2006.)
UNE-EN ISO 11608-4:2022 Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics (ISO 11608-4:2022) (Endorsed by Asociación Española de Normalización in July of 2022.)
UNE-EN 61788-22-1:2017 Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors (Endorsed by Asociación Española de Normalización in December of 2017.)
UNE-EN 62220-1-1:2015 Medical electrical equipment - Characteristics of digital x-ray imaging devices - Part 1-1: Determination of the detective quantum efficiency - Detectors used in radiographic imaging (Endorsed by AENOR in July of 2015.)

PT-IPQ, The use of electronic probes

NP 3136/2-1985

European Committee for Electrotechnical Standardization（CENELEC）, The use of electronic probes

EN 60512-16-1:2008 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage
HD 195 S4-1985 Safety Requirements for Mains Operated Electronic and Related Apparatus for Household and Similar General Use
HD 195 S5-1988 Safety Requirements for Mains Operated Electronic and Related Apparatus for Household and Similar General Use
HD 254 S2-1984 Safety of Household and Similar Electric Appliances Particular Requirements for Electric Shavers, Hair Clippers and Similar Appliances
EN 62220-1-3:2008 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging
EN 60335-2-8:2015 Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers@ hair clippers and similar appliances (Incorporates Amendment A1: 2016)
EN IEC 63008:2020 Household and similar electrical appliances - Accessibility of control elements, doors, lids, drawers and handles
EN IEC 60305:2021 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for AC systems - Characteristics of insulator units of the cap and pin type

International Electrotechnical Commission (IEC), The use of electronic probes

IEC 60512-16-1:2008 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage
IEC 60065:1985 Safety requirements for mains operated electronic and related apparatus for household and similar general use
IEC 61010-2-031:1993 Safety requirements for electrical equipment for measurement, control, and laboratory use; part 2-031: particular requirements for hand-held probe assemblies for electrical measurement and test
IEC 60730-2-16:1995 Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water level operating controls of the float type for household and similar applications
IEC 60730-2-16:2001 Automatic electrical controls for household and similar use - Part 2-16: Particular requirements for automatic electrical water level controls of the float type for household and similar applications
IEC 60335-2-58:1995 Safety of household and similar electrical appliances - Part 2: Particular requirements for commercial electric dishwashing machines
IEC 60065/AMD3:1992 Safety requirements for mains operated electronic and related apparatus for household and similar general use; amendment 3
IEC 60730-2-16/AMD2:2001 Automatic electrical controls for household and similar use - Part 2-16: Particular requirements for automatic electrical water level controls of the float type for household and similar applications; Amendment 2
IEC 60335-2-64:2017 Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines
IEC 61010-031:2015+AMD1:2018 CSV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and mea
IEC 60335-2-8:2002 Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
IEC 60669-2-1:2002/AMD1:2008 Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
IEC 62220-1-3:2008 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging
IEC 63008:2020 Household and similar electrical appliances - Accessibility of control elements, doors, lids, drawers and handles
IEC 60335-2-8:2005 Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
IEC 60669-2-1:2002/ISH2:2012 Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
IEC 62220-1-2:2007 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-2: Determination of the detective quantum efficiency - Detectors used in mammography
IEC 60305:2021 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for AC systems - Characteristics of insulator units of the cap and pin type

Malaysia Standards, The use of electronic probes

MS 937-1984

Society of Automotive Engineers (SAE), The use of electronic probes

SAE J2349-2002 Electric Windshield Wiper SwitchTrucks, Buses, and Multipurpose Vehicles
SAE J2349-2012 Electric Windshield Wiper Switch Trucks, Buses, and Multipurpose Vehicles
SAE AS8034B-2011 Minimum Performance Standard for Airborne Multipurpose Electronic Displays
SAE AS8034A-2005 (R) Minimum Performance Standard for Airborne Multipurpose Electronic Displays
SAE AS8034-1993 MINIMUM PERFORMANCE STANDARD FOR AIRBORNE MULTIPURPOSE ELECTRONIC DISPLAYS

SAE - SAE International, The use of electronic probes

SAE J2349-1997 Electric Windshield Wiper Switch - Trucks@ Buses@ and Multipurpose Vehicles

SE-SIS, The use of electronic probes

SIS SS 433 07 81-1985 Safety of household and similar electrical app/iances - Particular requirements for electric toilets other than those with electric combustion
SIS SS 441 01 65-1989 Safety requirements for mains operated electronic and related apparatus for household and similar general use
SIS SS 428 08 21-1989 Switches for household and similar fixed-electrical installations — Particular requirements for electronic switches
SIS SEN 01 02 66-1968 Electrotechnical vocabulary Detection and measurement of ionizing radiation by electric means

BE-NBN, The use of electronic probes

NBN 323-1954
NBN 323-1955
NBN-EN 60065-1994 Safety requirements for mains operated electronic and related apparatus for household and similar general use
NBN C 92-101-1973
NBN C 92-101-1989
NBN C 92-101-1991

Lithuanian Standards Office , The use of electronic probes

LST ISO 10359-1:1998 Water quality. Determination of fluoride. Part 1: Electrochemical probe method for potable and lightly polluted water
LST EN 60512-16-1-2008 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage (IEC 60512-16-1:2008)
LST EN 1071-4-2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA)
LST EN 60669-2-1-2004/A12-2010 Switches for household and similar fixed electrical installations -- Part 2-1: Particular requirements - Electronic switches
LST EN 62220-1-1-2015 Medical electrical equipment - Characteristics of digital x-ray imaging devices - Part 1-1: Determination of the detective quantum efficiency - Detectors used in radiographic imaging (IEC 62220-1-1:2015)
LST EN 62220-1-3-2008 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging (IEC 62220-1-3:2008)

Standard Association of Australia （SAA）, The use of electronic probes

AS 4899:2007 Pin insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c.
AS 61010.031:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC 61010-031:2002 MOD)
AS/NZS 3250:1995 Approval and test specification - Mains operated electronic and related equipment for household and similar general use

未注明发布机构, The use of electronic probes

SAE AS8034C-2018 (R) Minimum Performance Standard for Airborne Multipurpose Electronic Displays
YY 0457.5-2003 Medical electrical equipment. Characteristics of photoelectric X-ray image intensifiers. Part 5: Determination of detection quantum efficiency

Danish Standards Foundation, The use of electronic probes

DS/EN 60512-16-1:2008 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage
DS/EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA)
DS/EN 62220-1-3:2008 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging
DS/EN 60669-2-1/A12:2010 Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
DS/EN 60669-2-1/A1:2009 Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
DS/EN 60669-2-1:2005 Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
DS/EN 61262-5:2013 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency
DS/EN 60305:1998 Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type
DS/EN IEC 60305:2021 Insulators for overhead lines with a nominal voltage above 1000 V – Ceramic or glass insulator units for AC systems – Characteristics of insulator units of the cap and pin type
DS/EN 60335-2-17/A1:2006 Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads and similar flexible heating appliances
DS/EN 60335-2-17:2003 Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads and similar flexible heating appliances

National Association of Corrosion Engineers (NACE), The use of electronic probes

NACE 1C187-2005 Use of Galvanic Probe Corrosion Monitors in Oil and Gas Drilling and Production Operations (Item No. 24003)

European Committee for Standardization (CEN), The use of electronic probes

prEN 60065-1992 Safety requirements for mains operated electronic and related apparatus for household and similar general use (IEC 65:1985 + A1:1987 + A2:1989 + A3:1992, modified)
EN ISO 28057:2021 Clinical dosimetry - Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy (ISO 28057:2019)
FprEN ISO 11608-4:2021 Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics (ISO/FDIS 11608-4:2021)

TH-TISI, The use of electronic probes

TIS 1195-1993 Mains operated electronic and related apparatus for household and similar general use: safety requirements
TIS 1555-1998 Safety of household and similar electrical appliances.part 2: particular requirements for electric shavers, hair clippers and similar appliances

RO-ASRO, The use of electronic probes

STAS 8624-1980 ELECTRONIC APPARATUS FOR DOMESTIC AND SIMILAR PURPOSES Endurance to mechanical and climatical stresses
STAS 2614/1-1986 HOUSGHOLD AND SIMILAR USE ELECTRIC APPLIANCES Safety general iechnical requi- rements

RU-GOST R, The use of electronic probes

GOST 1232-2017 Porcelain and glass pin type insulators for voltage from 1 to 35 kV. General specifications
GOST R 8.700-2010 State system for ensuring the uniformity of measurements. Method of surface roughness effective height measurements by means of scanning probe atomic force microscope
GOST IEC 61262-5-2011 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 5. Determination of the detective quantum efficiency

American National Standards Institute （ANSI), The use of electronic probes

ANSI/EIA 540BAAC:1990 Nonmechanically Actuated Flexible Carrier Sockets for Pin Grid Array for Use in Electronic Equipment, Detail Specification for
ANSI/SCTE 48-2-2008 Test Procedure for Measuring Relative Shielding Properties of Active and Passive Coaxial Cable Devices Using Agilent Magnetic Close Field Probe
ANSI/EIA 540ADAA:1992 Adaptor-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Detail Specification for
ANSI/EIA 540B000:1989 Sectional Specification for Sockets for Pin-Grid Array Devices with 2.54 mm ￥ 2.54 mm (0.1" ￥ 0.1") Spacing for Use in Electronic Equipment
ANSI/EIA 540AD00:1991 Adapter-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Blank Detail Specification for
ANSI/EIA 540BAAB:1990 Non-Mechanically Activated Sockets for Pin Grid Array Devices with 2.54 mm ￥ 2.54 mm (0.1" ￥ 0.1") Spacing for Use in Electronic Equipment
ANSI/UL 60335-2-8a-2012 Standard for Safety for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Shavers, Hair Clippers, and Similar Appliances
ANSI/EIA 540BAAA-A:1996 Detail Specification: Mechanically Actuated (Zero and Low Insertion Force) Sockets for Pin Grid Array Devices with 2.54 mm × 2.54 mm (0.1" × 0.1") Spacing for Use in Electronic Equipment

CEN - European Committee for Standardization, The use of electronic probes

EN ISO 28057:2018 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy

IEC - International Electrotechnical Commission, The use of electronic probes

IEC 60335-17:1974 Safety of Household and Similar Electrical Appliances Particular Requirements for Electrically Heated Blankets@ Pads and Mattresses (Edition 1.0)

AT-ON, The use of electronic probes

ONORM E 4150-1979 Electrical overhead lines; pin for pin-insulator.type N 95 in accordance with ?NORM E4100
ONORM E 4152-1981 Electrica] overhead lines; swan neck hook for pin insulators type N in accordance with ONORM E 4100

U.S. Air Force, The use of electronic probes

AIR FORCE MIL-STD-188-154 A-1997 SUBSYSTEM, EQUIPMENT, AND INTERFACE STANDARDS FOR COMMON LONG HAUL AND TACTICAL TELECOMMUNICATIONS CONTROL FACILITIES

ZA-SANS, The use of electronic probes

SANS 60730-2-16:2007 Automatic electrical controls for household and similar use Part 2-16: Particular requirements for automatic electrical water level controls of the float type for household and similar applications
SANS 61010-2-031:1993 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-031: Particular requirements for hand-held probe assemblies for electrical measurement and test
SANS 60669-2-1:2003 Switches for household and similar fixed electrical installations Part 2-1: Particular requirements - Electronic switches

国家食品药品监督管理局, The use of electronic probes

YY/T 0590.1-2018 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1: Determination of the detective quantum efficiency

Professional Standard - Medicine, The use of electronic probes

YY/T 0590.3-2011 Medical electrical equipment.Characteristics of digital X-ray imaging devices.Part 1-3:Determination of the detective quantum efficiency.Detectors used in dynamic imaging
YY/T 0590.2-2010 Medical electrical equipment.Characteristics of digital X-ray imaging devices.Part 1-2 : Determination of the detective quantum efficiency. Detectors used in mammography
YY/T 0457.5-2003 Medical electrical equipment-Characteristics of electro-optical X-ray image intensifiers-Part 5:Determination of the detective quantum efficiency

Underwriters Laboratories (UL), The use of electronic probes

UL 60335-2-8-2004 UL Standard for Saftey for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Shavers, Hair Clippers, and Similar Appliances Fifth Edition; Reprint with Revisions Through and Including March 26, 2007

Professional Standard - Agriculture, The use of electronic probes

SN/T 3241.12-2016 Safety Technical Requirements for Import and Export of Household and Similar Electrical Appliances Part 12: Electronic Toilets

国家质量监督检验检疫总局, The use of electronic probes

SN/T 3532.3-2016 Safety technical requirements for import and export of household and similar electrical appliances Part 3: Electronic toilets

CENELEC - European Committee for Electrotechnical Standardization, The use of electronic probes

EN 60335-2-8:1990 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Electric Shavers@ Hair Clippers and Similar Appliances
EN 60335-2-8:1995 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Shavers@ Hair Clippers and Similar Appliances
EN 60669-2-1:2000 Switches for Household and Similar Fixed Electrical Installations Part 2-1: Particular Requirements -Electronic Switches
EN 60669-2-1:1996 Switches for Household and Similar Fixed-Electrical Installations Part 2: Particular Requirements Section 1: Electronic Switches (Incorporates Amendment A11 : 1997)

Canadian Standards Association (CSA), The use of electronic probes

CSA IEC E730-2-5-94-CAN/CSA:1994 Dispositifs De Commande Electrique Automatiques A Usage Domestique Et Analogue Deuxieme Partie: Regles Particulieres Pour Les Systemes De Commande Electrique Automatiques Des Bruleurs Fiche No 1