ZH
RU
ES

Double 85 test principle

Double 85 test principle, Total:258 items.

In the international standard classification, Double 85 test principle involves: Non-destructive testing, Integrated circuits. Microelectronics, Construction equipment, Road vehicle systems, Machine tools, Products of the textile industry, Paints and varnishes, Air quality, Leather technology, Rubber, Insulation, Paper and board, Nuclear energy engineering, Bearings, Freight distribution of goods, Test conditions and procedures in general, Textile fibres, Metrology and measurement in general, Energy and heat transfer engineering in general, Veterinary medicine, Farming and forestry, Petroleum, petroleum products and natural gas handling equipment, Company organization and management, Quality, Glass, Optics and optical measurements, Mechanical testing, Lubricants, industrial oils and related products, Milk and milk products, Particle size analysis. Sieving, Petroleum products in general, Fuels, Character sets and information coding, Measurement of volume, mass, density, viscosity, Paint ingredients, Equipment for petroleum and natural gas industries, Adhesives, Protection against fire, Laboratory medicine, Vocabularies, Rubber and plastics products, Powder metallurgy, Fluid storage devices, Protection against dangerous goods, Installations in buildings, Networking, Corrosion of metals.

Japanese Industrial Standards Committee (JISC), Double 85 test principle

JIS Z 2359:2021 Principle of strain gauge testing
JIS K 6557-4:2016 Leather -- Physical and mechanical tests -- Determination of tear load by double edge tear
JIS C 60664-1:2009 Insulation coordination for equipment within low-voltage systems -- Part 1: Principles, requirements and tests
JIS B 7912-1:2004 Field procedures for testing geodetic and surveying instruments -- Part 1: Theory

German Institute for Standardization, Double 85 test principle

DIN 66054:2017-08 Comparative testing - Technical principles
DIN 51350-1:2015-03 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN 2384:2020-10 Thermal energy storage - Terminology, requirements, parameters, test principles
DIN 54270-1:1976-09 Testing of textiles; determination of the limit-viscosity of celluloses, principles
DIN 53863-1:1960-12 Testing of textiles; abrasion test methods for textile planar fabrics, principles
DIN 53545:2016-12 Testing of rubber - Determination of low-temperature behaviour of elastomers - Principles and test methods
DIN 53545:1990 Determination of low-temperature behaviour of elastomers; principles and test methods
DIN EN ISO 3377-2:2016-07 Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear (ISO 3377-2:2016); German version EN ISO 3377-2:2016
DIN 51819-1:2016-12 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
DIN 51821-1:2016-07 Testing of lubricants - Test using the FAG roller bearing grease testing apparatus FE9 - Part 1: General working principles
DIN 51834-1:2010-11 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 1: General working principles
DIN EN ISO 3377-2:2003 Leather - Physical and mechanical tests; Determination of tear load - Part 2: Double edge tear (ISO 3377-2:2002); German version EN ISO 3377-2:2002
DIN ISO 21250-1:2022-12 Rolling bearings - Noise testing of rolling bearing greases - Part 1: Basic principles, testing assembly and test machine (ISO 21250-1:2020); Text in German and English / Note: Date of issue 2022-10-28
DIN 51347-2:2000-01 Testing of lubricants - Testing under boundary lubricating conditions with the Brugger lubricant tester - Part 2: General working principles
DIN 51347-1:2000-01 Testing of lubricants - Testing under boundary lubricating conditions with the Brugger lubricant tester - Part 1: General working principles
DIN 51350-1:2010 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN 51350-1:2015 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN 53829-1:2014-12 Testing of textiles - Determination of the evenness of filament yarns - Part 1: Testing of the force and extension on the running yarn, principles
DIN EN 15856:2010-05 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid; German version EN 15856:2010
DIN 53533-1:1988 Testing of elastomeres; testing of heat generation and service life during the fatigue test (flexometer test); bases principles
DIN 51400-1:2009 Testing of mineral oils and fuels - Determination of sulfur content (total sulfur) - Part 1: General working principles
DIN 51400-1:2009-04 Testing of mineral oils and fuels - Determination of sulfur content (total sulfur) - Part 1: General working principles
DIN ISO 21250-1:2023-09 Rolling bearings - Noise testing of rolling bearing greases - Part 1: Basic principles, testing assembly and test machine (ISO 21250-1:2020)
DIN-Fachbericht 143:2005 Modern rheological test methods - Part 1: Determination of the yield point - Fundamentals and comparative testing methods
DIN 51451:2020 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
DIN EN 1825-1:2004-12 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004
DIN EN ISO 3377-2:2016 Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear (ISO 3377-2:2016); German version EN ISO 3377-2:2016
DIN 51900-1:2000-04 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods / Note: To be replaced by DIN 51900 (2022-06).
DIN EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid; German version EN 15856:2010

Professional Standard - Electron, Double 85 test principle

SJ/T 10740-1996 Semiconductor integrated circuits - General principles of measuring methods for bipolar random access memories
SJ/T 10735-1996 Semiconductor integrated circuits General principles of measuring methods for TTL circuits
SJ/T 10736-1996 Semiconductor integrated circuits - General principles of measuring methods for HTL circuits
SJ/T 10737-1996 Semiconductor integrated circuits - General principles of measuring methods for ECL circuits
SJ/T 10741-2000 Semiconductor integrated circuits General principles of measuring methods for CMOS circuits
SJ/T 10741-1996 Semiconductor integrated circuits--General principles of measuring methods for CMOS circuits
SJ/T 10804-2000 Semiconductor integrated circuits.General principles of measuring methods for level translator
SJ/T 10805-2000 Semiconductor integrated circuits.General principles of measuring methods for voltage comparators
SJ/T 10882-1996 Semiconductor integrated circuits - General principles of measuring methods for linear amplifiers
SJ 20961-2006 General principles of measuring methods of A/D and D/A converters for integrated circuits
SJ/T 10803-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for line circuits
SJ/T 10739-1996 Semiconductor integrated circuits - General principles of measuring methods for MOS random access memories
SJ/T 10738-1996 Semiconductor integrated circuits - General principles of measuring methods for operational (voltage) amplifiers
SJ/T 10800-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for sense amplifiers
SJ/T 10802-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for peripheral drivers
SJ/T 10805-1996 Semiconductor integrated circuits used as interface circuits--General principles of measuring methods of voltage comparators
SJ/T 10804-1996 Semiconductor integrated circuits used as interface circuits--General principles of measuring methods for level translator
SJ/T 10806-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for display drivers
SJ/T 11007-1996 Semiconductor TV integrated circuits - General principles of measuring methods for video signal and chrominance signal processing circuits
SJ/T 11005-1996 Semiconductor TV integrated circuits - General principles of measuring methods for audio channel circuits
SJ/T 11006-1996 Semiconductor TV integrated circuits - General principles of measuring methods for horizontal and vertical sweep circuits
SJ/T 10401-1993 General principles of measuring methods for motor speed stablizers of semiconductor audio integrated circuits
SJ 2480-1984 General principles of static measurement for D/A converters for hybrid integrated circuits
SJ/T 10402-1993 General principles of measuring methods for automatic music selectors of semiconductor audio integrated circuits
SJ/T 10400-1993 General principles of measuring methods for graphic equalizers of semiconductor audio integrated circuits
SJ/T 11004-1996 Semiconductor TV integrated circuits - General principles of measuring methods for picture channel circuits
SJ/T 10880-1996 Semiconductor integrated audio circuits - General principles of measuring methods for stereo decoders
SJ 2481-1984 General principles of static measurement for A/D converters for hybrid integrated circuits
SJ/T 10879-1996 Semiconductor integrated audio circuits - General principles of measuring methods for audio preamplifiers
SJ/T 10427.1-1993 Grneral Principles of measuring methods of FM converter for semiconductor audio integrated circuits
SJ/T 10427.2-1993 General principles of measuring methods of intermediate-frequency amplifier for semiconductor audio integrated circuits
SJ/T 10881-1996 Semiconductor integrated audio circuits - General principles of measuring methods for stereo decoders
SJ/T 10801-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for magnetic memory drivers
SJ/T 10818-1996 Semiconductor integrated circuits - General principles of measuring methods for D/A and A/D converters of non-linear circuits

Association Francaise de Normalisation, Double 85 test principle

FD S99-513*FD ISO/TR 21582:2021 Pyrogenicity - Principles and methods for pyrogen testing of medical devices
FD ISO/TR 21582:2021 Pyrogénicité - Principes et méthodes d'essai pour la recherche des pyrogènes sur les dispositifs médicaux
NF Q03-038:1983 Paper and board tests. Measurement of diffuse reflectance factor. General principles.
NF G52-014:2003 Leather - Physical and mechanical tests - Determination of tear load - Part 2 : double edge tear.
NF G52-014-2*NF EN ISO 3377-2:2016 Leather - Physical and mechanical tests - Determination of tear load - Part 2 : double edge tear
NF EN ISO 3377-2:2016 Cuir - Essais physiques et mécaniques - Détermination de la force de déchirement - Partie 2 : déchirement des deux bords
NF P78-341*NF EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1 : fundamentals of testing glass.
NF EN 15856:2010 Essais non destructifs - Émission acoustique - Principes généraux des contrôles par émission acoustique pour la détection de la corrosion dans une enceinte métallique remplie de liquide
NF ISO 14955-3:2020 Machines-outils - Évaluation environnementale des machines-outils - Partie 3 : principes des essais des machines travaillant par enlèvement de métal à l'égard de l'efficacité énergétique
NF EN ISO 10724-1:2002 Plastiques - Moulage par injection d'éprouvettes en compositions de poudre à mouler (PMC) thermodurcissables - Partie 1 : principes généraux et moulage d'éprouvettes à usages multiples
NF M88-117:1993 Petroleum products. Filling detectors for tank truck containers for liquefied petroleum gas transport. Working principle. Testing and control.
NF EN ISO 21254-1:2011 Lasers et équipements associés aux lasers - Méthodes d'essai du seuil d'endommagement provoqué par laser - Partie 1 : définitions et principes de base
NF ISO 1268-10:2006 Plastiques renforcés de fibres - Méthodes de fabrication de plaques d'essai - Partie 10 : moulage par injection de BMC et d'autres mélanges à mouler à fibres longues - Principes généraux et moulage d'éprouvettes à usages multiples

ECIA - Electronic Components Industry Association, Double 85 test principle

TEP146-1964 Philosophy of Vibration Testing of Receiving Tubes (TEP46)

Indonesia Standards, Double 85 test principle

SNI 09-1252-1989 Motor vehicles parking brake, Performance test
SNI 09-1247-1989 Braking equipment for light trucks, Performance test
SNI 05-1362-1989 Surface grinding machines with horizontal spindle, Geometric test methods
SNI 09-0967-1989 Dry type air filters for motor vehicles, Performance test
SNI ISO 3377-2:2012 Leather - Physical and mechanical test - Determination of tear load - Part 2: Double edge tear

FI-SFS, Double 85 test principle

SFS 3099-1974

未注明发布机构, Double 85 test principle

DIN 50942:1996 Phosphating of metals – process principles, test methods
BS EN 1825-1:2004(2007) Grease separators — Part 1 : Principles of design, performance and testing, marking and quality control
BS EN ISO 10724-1:2001(2002) Plastics — Injection moulding oftest specimens of thermosetting powder moulding compounds (PMCs) — Part1 : Generalprinciples and moulding ofmultipurpose test specimens

Korean Agency for Technology and Standards (KATS), Double 85 test principle

KS K 0105-2017 General principles of physical testing methods for textiles
KS M ISO 3377-2:2020 Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear
KS A IEC 60300-3-5-2003(2018)
KS M ISO 3377-2:2008 Leather－Physical and mechanical tests－Determination of tear load－Part 2：Double edge tear
KS A IEC 60300-3-5:2003 Dependability management－Part 3：Application guide－Section 5：Reliability test conditions and statistical test principles
KS X ISO/IEC 19795-1-2014(2019) Information technology — Biometric performance testing and reporting — Part 1: Principles and framework
KS M ISO 7278-1:2003 Liquid hydrocarbons－Dynamic measurement－Proving systems for volumetric meters－Part 1：General principles
KS M ISO 4666-1:2010 Rubber, vulcanized-Determination of temperature rise and resistance to fatigue in flexometer testing-Part 1:Basic principle
KS M ISO 4666-1-2015(2021) Rubber, vulcanized－Determination of temperature rise and resistance to fatigue in flexometer testing－Part 1：Basic principle
KS M ISO 4666-1:2015 Rubber, vulcanized－Determination of temperature rise and resistance to fatigue in flexometer testing－Part 1：Basic principle
KS B ISO 15708-2:2018 Non-destructive testing —Radiation methods for computed tomography — Part 2: Principles, equipment and samples
KS D ISO 11846:2003 Corrosion of metals and alloys－Determination of resistance to intergranular corrosion of solution heat－treatable aluminium alloys

British Standards Institution (BSI), Double 85 test principle

BS 3900-D8:1986 Methods of test for paints. Optical tests on paint films. Determination of colour and colour difference: principles
BS EN ISO 3377-2:2002 Leather - Physical and mechanical tests - Determination of tear load - Double edge tear
BS EN ISO 3377-2:2003 Leather - Physical and mechanical tests - Determination of tear load - Double edge tear
BS EN ISO 105-J01:2000 Textiles - Tests for colour fastness - General principles for measurement of surface colour
BS ISO 21250-1:2020 Rolling bearings. Noise testing of rolling bearing greases - Basic principles, testing assembly and test machine
BS EN ISO 3377-2:2016 Tracked Changes. Leather. Physical and mechanical tests. Determination of tear load. Double edge tear
BS ISO 22290:2020 Non-destructive testing. Infrared thermographic testing. General principles for thermoelastic stress measuring method
19/30364140 DC BS ISO 21250-1. Rolling bearings. Noise testing of rolling bearing greases. Part 1. Basic principles, testing assembly, test machine
BS 903-A49:1984 Physical testing of rubber - Part A49: Determination of temperature rise and resistance to fatigue in flexometer testing (basic principles)
BS EN ISO 15708-2:2019 Non-destructive testing. Radiation methods for Computed tomography. Principles, equipment and samples
BS 476-10:2009 Fire tests on building materials and structures – Part 10: Guide to the principles, selection, role and application of fire testing and their outputs
18/30340676 DC BS EN ISO 22475-1. Geotechnical investigation and testing. Sampling methods and groundwater measurements. Part 1. Technical principles for execution
BS 476-20:1987 Fire tests on building materials and structures - Method for determination of the fire resistance of elements of construction (general principles)
19/30400855 DC BS EN ISO 22475-1.2. Geotechnical investigation and testing. Sampling of soil, rock and ground water. Part 1. Technical principles
PD ISO/TR 19686-100:2016 Petroleum products. Equivalency of test method determining the same property. Background and principle of the comparison and the evaluation of equivalency
BS EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid

CU-NC, Double 85 test principle

NC 34-64-1988 Agricultural Machines and Implements. Roots Harvester Methodology for Test Realization
NC 34-65-1989 Agricultural Machineries and Implentents. Mowing Machines and Methodology for Tests Realization
NC 34-55-1987 Agricultural Machineries and Implements. Grain Harvesters Methodology for Tests Realization
NC 34-62-1988 Agricultural Machineries and Implements. Agricultural Equipment Test. Terms and Definitions
NC 34-63-1988 Agricultural Machinery and Impleraents. Furrow-making Machines. Methodology for Test Realization
NC 34-50-1987 Agricultural Machineries and Implements. Grai Sower. Methodology for Test Realization
NC 34-47-1987 Agricultural Machinery and Elements. Forestry and Agricultural Machines. Methodology for the Determination of Testing Conditions
NC 34-48-1987 Agricultural Machinery and Elements. Foresty and Agricultural Machines. Energetic Evaluation. Methodology for its Impleraentation
NC 34-54-1987 Agricultural Machineries and Implements. Trailer and Semitrailer. Methodology for Tests Realization
NC 34-56-1987 Agricultural Machineries and Implements. Spraying Machines and Dusters. Methodology for Tests Realization
NC 34-49-1987 Agricultural Implements and Machineries. Growers for Alternate Cultivation Works. Methodology for Test Realization
NC 34-67-1989 Agricultural Machineries and Implements. Brake Tests for Internal Combustion Engines and Self-Propelled Machines Methodology for Its Realization

Military Standard of the People's Republic of China-General Armament Department, Double 85 test principle

GJB 3289-1998 Satellite electrical performance test fault prevention and handling principles

Association of German Mechanical Engineers, Double 85 test principle

VDI 3491 Blatt 1-2016 Measurement of particles - Methods for generating test aerosols - Principles and overview
VDI 2048 Blatt 1-2000 Uncertainties of measurements at acceptance tests for energy conversion and power plants - Fundamentals
VDI 4205 Blatt 1-2003 Measurement and test methods for the assessment of vapour recovery systems on filling stations - Fundamentals

Professional Standard - Light Industry, Double 85 test principle

QB/T 2711-2005 Leather-Physical and mechanical tests-Determination of tear load-Double edge tear

IN-BIS, Double 85 test principle

IS 5420 Pt.1-1969

American Society for Testing and Materials (ASTM), Double 85 test principle

ASTM C1514-08(2017) Standard Test Method for Measurement of ²³⁵U Fraction Using Enrichment Meter Principle
ASTM C1514-02 Standard Test Method for Measurement of ²³⁵U Fraction using the Enrichment Meter Principle
ASTM C1514-08 Standard Test Method for Measurement of ²³⁵U Fraction Using Enrichment Meter Principle
ASTM D5802-95 Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)
ASTM D5802-95(2001) Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)
ASTM B962-08 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedesx2019; Principle
ASTM B962-13 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedesrsquo; Principle
ASTM B962-23 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

KR-KS, Double 85 test principle

KS M ISO 3377-2-2020 Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear
KS B ISO 15708-2-2018 Non-destructive testing —Radiation methods for computed tomography — Part 2: Principles, equipment and samples

ES-UNE, Double 85 test principle

UNE-EN ISO 3377-2:2016 Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear (ISO 3377-2:2016)

HU-MSZT, Double 85 test principle

Danish Standards Foundation, Double 85 test principle

DS/ISO/TR 15070/Amd. 2:2012 Series 1 freight containers - Rationale for structural test criteria
DS/ISO/TR 15070:2000 Series 1 freight containers - Rationale for structural test criteria
DS/EN ISO 3377-2:2003 Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear
DS/EN 1288-1:2001 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
DS/EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
DS/ISO/TR 15070/Amd .1:2006 Series 1 freight containers - Rationale for structural test criteria - Amendment 1: Guidance on structural integrity

Group Standards of the People's Republic of China, Double 85 test principle

T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/CVMA 15-2020 Detection method of double-antigen sandwich enzyme-linked immunosorbent assay for novel coronavirus animal serum antibody
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Double 85 test principle

GB/T 14028-1992 General principles of measuring methods of analogue switches for semiconductor integrated circuits
GB/T 14030-1992 General principles of measuring methods of timer circuits for semiconductor integrated circuits
GB 14030-1992 Basic principles of semiconductor integrated circuit time-based circuit testing methods
GB 14028-2018 Basic principles of semiconductor integrated circuit analog switch test methods
GB/T 6798-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage comparators
GB/T 4377-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage regulator
GB/T 14031-1992 General principles of measuring methods of analogue phase-loop for semiconductor integrated circuits
GB/T 14032-1992 General principles of measuring methods of digital phase-locked loop for semiconductor integrated circuits
GB/T 14029-1992 General principles of measuring methods of analogue multiplier for semiconductor integrated circuits
GB 14029-1992 Basic principles of semiconductor integrated circuit analog multiplier testing methods
GB 14031-1992 Basic principles of semiconductor integrated circuit analog phase-locked loop testing methods
GB 14032-1992 Basic principles of digital phase-locked loop testing methods for semiconductor integrated circuits
GB/T 15136-1994 General principles of measuring methods for quartz clock and watch circuits of semiconductor integrated circuits
GB/T 14115-1993 General principles of measuring methods of Sample/Hold amplifiers for semiconductor integrated circuits
GB 3442-1986 Basic principles of semiconductor integrated circuit operational (voltage) amplifier testing methods
GB/T 12843-1991 General principle of measuring methods of microprocessors and peripheral interface circuits' parameters for semiconductor integrated circuits
GB 12843-1991 Basic principles of electrical parameter testing methods for semiconductor integrated circuit microprocessors and peripheral interface circuits
GB/T 6800-1986 General principles of measuring methods of audio power amplifiers for semiconductor audio integrated circuits
GB/T 14114-1993 General principles of measuring methods of V/F and F/V converters for semiconductor integrated circuits
GB/T 15584-1995 Rubber, vulcanized--Determination of temperature rise and resistance to fatigue in flexometer testing--Part 1: Basic principles

ZA-SANS, Double 85 test principle

SANS 1833-1:2007 Textiles - Quantitative chemical analysis Part 1: General principles of testing

AENOR, Double 85 test principle

UNE 200001-3-5:2002 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles.
UNE-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.
UNE-EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid

International Organization for Standardization (ISO), Double 85 test principle

ISO 21250-1:2020 Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing assembly and test machine
ISO 3377-2:2002 Leather - Physical and mechanical tests; Determination of tear load - Part 2: Double edge tear
ISO 3377-2:2016 Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear
ISO 3377-2:2002 | IULTCS/IUP 8 Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear
ISO 3377-2:2016 | IULTCS/IUP 8 Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear
ISO 14955-5:2020 Machine tools — Environmental evaluation of machine tools — Part 5: Principles for testing woodworking machine tools with respect to energy supplied
ISO/CD TR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
ISO/DTR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions

Standard Association of Australia （SAA）, Double 85 test principle

AS 2001.2.28:1992 Methods of test for textiles - Physical tests - Determination of abrasion resistance of textile fabrics (rotary platform, double-head method)
AS 2300.1.5:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of ash
AS 2300.1.6:1989 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of pH
AS 2300.2.7:1988 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of calcium
AS 2300.2.8:1988 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of chloride
AS 2300.2.9:1988 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of phosphorus
AS 2300.1.6:2010
AS 2300.1.10:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of phosphatase activity
AS 2300.2.6:1988 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of lactose
AS 2300.1.10:2008 Methods of chemical and physical testing for the dairying industry Method 1.10: General methods and principles— Determination of phosphatase activity
AS 2313.2.6:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Physical properties - Determining the thickness of release liner
AS 2313.2.7:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Physical properties - Determining grammage of release liner
AS 2300.1.1:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of total solids and moisture
AS 2300.1.3:2008
AS 2300.1.5:2008
AS 2300.1.3:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of fat - Gravimetric method
AS 2300.2.10:1988 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of titratable acidity
AS 2300.1.1:2008
AS 2300.1.2.1:1991 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of nitrogen - Reference Kjeldahl method
AS 2300.1.7:1990 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of extraneous matter in dairy products
AS 2300.1.9:1987 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of sucrose and glucose - Enzymatic method
AS 2300.2.3:1981 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of the iodide content of milk - Selective ion electrode method
AS 2300.1.7/SUPP 1:1990 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of extraneous matter in dairy products - Reference print (Supplement to AS 2300.1.7-1990)
AS 2300.1.2.2:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of nitrogen - Nitrogen fractions from milk
AS 2300.1.2.2:2008 Methods of chemical and physical testing for the dairying industry Method 1.2.2: General methods and principles- Determination of nitrogen—Nitrogen fractions from milk
AS 2300.1.4.2:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of fat content of milk and liquid dairy products by the Babcock method - Methodology

Aerospace Industries Association, Double 85 test principle

AIA NASM1312-13-2003 Fastener Test Methods; Method 13 Double Shear Test Rev. 1; FSC 53GP

VN-TCVN, Double 85 test principle

TCVN 7122-2-2007 Leather.Physical and mechanical tests.Determination of tear load.Part 2: Double edge tear

European Committee for Standardization (CEN), Double 85 test principle

EN ISO 3377-2:2002 Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear
EN ISO 3377-2:2016 Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear

Professional Standard - Agriculture, Double 85 test principle

NY/T 1860.4-2010 Guidance on the determination of physico-chemical properties of pesticides.Part 4:Technical material stability
NY/T 1860.10-2016 Guidelines on the determination of physico-chemical properties of pesticides.Part 10:Oxidation/Reduction: chemical incompatibility
NY/T 1860.10-2010 Guidance on the determination of physico-chemical properties for pesticides.Part 10:Oxidation/Reduction:Chemical incompatibility

工业和信息化部/国家能源局, Double 85 test principle

JB/T 13221-2017 Solid material electro-thermal-magnetic coupling physical field in-situ mechanical property testing system

Lithuanian Standards Office , Double 85 test principle

LST EN 1288-1-2002 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
LST EN 15856-2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
LST EN ISO 3377-2:2003 Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear (ISO 3377-2:2002)

RU-GOST R, Double 85 test principle

GOST R ISO 3377-2-2014 Leather. Physical and mechanical tests. Determination of tear load. Part 2. Method for double edge tear
GOST ISO/TS 10993-20-2011 Medical devices. Biological evaluation of medical devices. Part 20. Principles and methods for immunotoxicology testing of medical devices

PL-PKN, Double 85 test principle

PN C04632-03-1988 Water and waste water General principles of sampling for physical, chemical ar.d biological examination Sampling techni?ue
PN C04632-01-1987 Water and waste water General principles of sampling for physical, chemical and biological examination Introduction and rang? of standard
PN C04632-02-1987 Water and waste water General principles of sampling for physical, chemical and biological examination Design of sampling programmes
PN C04632-04-1988 Water and waste water General principles of sampling for physical, chemical and biological examination Preservation and storage

NATO - North Atlantic Treaty Organization, Double 85 test principle

AOP-25-1999 Rationale and Guidance Concerning STANAG 4327 Lightning@ Munition Assessment and Test Procedures (ED 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)

CEN - European Committee for Standardization, Double 85 test principle

EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid

BE-NBN, Double 85 test principle

NBN F 51-005-1986

European Telecommunications Standards Institute (ETSI), Double 85 test principle

ETSI PRETS 300 012-1991 Integrated Services Digital Network (ISDN); Basic User-Network Interface Layer 1 Specification and Test Principles
ETSI PRETS 300 011-1991 Integrated Services Digital Network (ISDN); Primary Rate User-Network Interface Layer 1 Specification and Test Principles
ETSI PRETS 300 012-1990 Integrated Services Digital Network (ISDN): Basic User-Network Interface Layer 1 Specification and Test Principles (L 03-07)
ETSI ETS 300 012-1992 CORRIGENDUM Integrated Services Digital Network (ISDN); Basic User-Network Interface Layer 1 Specification and Test
ETSI ETS 300 012-1993 CORRIGENDUM Integrated Services Digital Network (ISDN); Basic User-Network Interface Layer 1 Specification and Test Principles
ETSI ETS 300 012 PRA1-1994 AMD 1 Integrated Services Digital Network (ISDN); Basic User-Network Interface Layer 1 Specification and Test Principles
ETSI ETS 300 012 PRA2-1995 AMD 2 Integrated Services Digital Network (ISDN); Basic User-Network Interface; Layer 1 Specification and Test Principles
ETSI PRETS 300 011-1990 Integrated Services Digital Network (ISDN): Primary rate User-Network Interface Layer 1 Specification and Test Principles (L 03-14)
ETSI ETS 300 011 PRA1-1994 AMD 1 Integrated Services Digital Network (ISDN): Primary Rate User- Network Interface Layer 1 Specification and Test Principles
ETSI ETS 300 011 PRA2-1995 AMD 2 Integrated Services Digital Network (ISDN); Primary Rate User-Network Interface; Layer 1 Specification and Test Principles

YU-JUS, Double 85 test principle

JUS B.D8.302-1984 Refractories. Methods of fisical testing. Determination of true density refractorl products and raw materials
JUS M.E5.100-1980 Heat exchangers. Verification of thermal balance of water-fed or steam-fed primary circuits. Principles and test requirements

Canadian General Standards Board （CGSB), Double 85 test principle

CAN/CGSB-4.2 NO.9.1-M90-1990 Textile Test Methods Breaking Strength of Fabrics - Strip Method - Constant-Time-to-Break Principle

VDI - Verein Deutscher Ingenieure, Double 85 test principle

VDI/VDE/DGQ/DKD 2622 BLATT 9.1-2009 Kalibrieren von Messmitteln fuer elektrische Groessen - Pruefgeraete zur Feststellung der elektrischen Sicherheit - Elektrische Geraete nach DIN VDE 0701-0702
VDI/VDE/DGQ/DKD 2622 BLATT 9.1-2019 Kalibrieren von Messmitteln fuer elektrische Groessen - Pruefgeraete zur Feststellung der elektrischen Sicherheit - Elektrische Geraete nach DIN VDE 0701-0702

European Association of Aerospace Industries, Double 85 test principle

AECMA PREN 2078-1997 Aerospace Series Metallic Materials Manufacturing Schedule, Inspection Schedule, Inspection and Test Report Definition, General Principles, Preparation and Approval Edition 2

GB-REG, Double 85 test principle

REG NASA-LLIS-1336--2003 Lessons Learned - Verify Flight& GSE Cables Against Unit& System Schematics Prior to Test (1998)

Malaysia Standards, Double 85 test principle

MS 133 Pt.B5-1997 Methods of test for paints and varnishes:Part B5:Determination of "soluble" lead content by flame atomic absorption spectrometric method and dithizone spectrophotometric method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Double 85 test principle

GB/T 1687.1-2016 Rubber, vulcanized—Determination of temperature rise and resistance to fatigue in flexometer testing—Part 1: Basic principles
GB/T 33851-2017 Information technology－Telecommunications and information exchange between systems－Dual carrier based wireless high rate ultra wideband physical layer test specification

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Double 85 test principle

ASHRAE QC-06-035-2006 Accuracy Tests for Simulations of VAV Dual-Duct, Single-Zone, Four-Pipe Fan-Coil, and Four-Pipe Induction Air-Handling Systems RP-865