ZH
RU
ES

Double 85 test conditions

Double 85 test conditions, Total:500 items.

In the international standard classification, Double 85 test conditions involves: Electricity. Magnetism. Electrical and magnetic measurements, Machine tools, Paints and varnishes, Chipless working equipment, TEXTILE AND LEATHER TECHNOLOGY, Packaging and distribution of goods in general, Integrated circuits. Microelectronics, Electronic tubes, Woodworking equipment, Internal combustion engines, Construction materials, Optoelectronics. Laser equipment, Telecommunication systems, Test conditions and procedures in general, Sacks. Bags, Optics and optical measurements, Pulps, Paper and board, Biology. Botany. Zoology, Pesticides and other agrochemicals, Cellular materials, Special measuring equipment for use in telecommunications, Shop fittings, Vocabularies, Aerospace fluid systems and components, Equipment for petroleum and natural gas industries, Mechanical structures for electronic equipment, Mechanical testing, Acoustics and acoustic measurements, Earth-moving machinery, Audio, video and audiovisual engineering, Measurement of force, weight and pressure, Aircraft and space vehicles in general, Motor cycles and mopeds, Power transmission and distribution networks, Industrial automation systems, Textile fibres, Solar energy engineering, Fibre optic communications, Adhesives, Plastics, Coatings and related processes used in aerospace industry, Equipment for the chemical industry, Non-destructive testing, Surface treatment and coating, Power stations in general, Protective equipment, Applications of information technology, Mining equipment, Protection against fire, Pipeline components and pipelines, Wastes, Agricultural machines, implements and equipment, Electric road vehicles, Lamps and related equipment, Railway rolling stock, Road vehicle systems, Wood-based panels, Electrical engineering in general, On-board equipment and instruments, Linear and angular measurements, Domestic, commercial and industrial heating appliances, Installations in buildings, Measurement of volume, mass, density, viscosity, Photography, Insulating materials, Road engineering, Farm buildings, structures and installations, Electrical wires and cables, Rubber, Environmental testing, Elements of buildings, Telecommunication terminal equipment, Rotating machinery, Characteristics and design of machines, apparatus, equipment.

RU-GOST R, Double 85 test conditions

GOST R 52663-2006 Paint materials. Method for determination of gloss of non-metallic paint films at 20°, 60° and 85°
GOST 25864-1983 Forcemeasuring standard machines of 2 grade. General technical requirements
GOST R 57638-2017 Polymer composites. Determination of the fracture resistance of adhesive joints under cleavage conditions by means of double cantilever beam and tapered double cantilever beam
GOST R ISO 3059-2015 Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions
GOST 356-1980 Valves and parts of pipe-lines. Nominal, test and operational pressures. Series
GOST 20915-2011 Testing agricultural tractors and machines. Procedure for determines test conditions
GOST 25651-1983 Testing and measuring instruments for vehicles. General technical requirements. Test methods
GOST 6433.1-1971 Solid electrical insulating materials. Environmental conditions at preparation of samples and testing
GOST R 52320-2005 Electricity metering equipment (a.c). General requirements. Tests and test conditions. Part 11. Meters for electric energy
GOST R IEC 332-3-1996 Tests on cables under fire conditions. Test on bunched o wires or cables
GOST ISO 1985-2016 Surface grinding machines with vertical spindle and the mobile table. Test conditions. Testing of the accuracy
GOST 28264-1989 Test documents FS1, FS2, FS3 for facsimile apparatus. Specifications
GOST 28265-1989 Test documents MK1, MK2, MK3 for facsimile apparatus. Specifications

Professional Standard - Electron, Double 85 test conditions

SJ/T 10438-1993 General specification for bipolar transister DC parameter testers
SJ 442-1973 Measurement conditions for high-voltage rectifier tubes
SJ 362-1973 Measurement conditions for reflex klystrons
SJ 1705-1981 Measurement conditions of power klystrons
SJ 430-1973 Measurement conditions for O-type backward-wave tubes
SJ 1871-1981 Measurement conditions for gas laser devices
SJ 419-1973 Measurement conditions for low noise travelling wave tubes
SJ 3209-1989 General specification for weldable testing instrument
SJ/T 10144-1991 Specification for solderability tester by globule method
SJ/T 10146-1991 Specification for solderability tester by solder bath method
SJ/T 10724-1996 General specification of measurement condenser microphones
SJ/T 10145-1991 Specification for solderability tester by wetting balance method
SJ/T 10314-1992 Generic specification of resistivity measuring instrument with four-point probe
SJ 1386-1978 Measurement conditions for noise-generator diodes and gas discharge noise tubes

Professional Standard - Education, Double 85 test conditions

JY 74-1982 Dicotyledon leaf cross-section technical conditions (Trial)
JY 73-1982 Technical conditions for stem cross-section of woody dicotyledonous plants (trial)

IN-BIS, Double 85 test conditions

International Organization for Standardization (ISO), Double 85 test conditions

ISO 4703:1977 Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of accuracy
ISO 11090-2:2014 Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy — Part 2: Double-column machines (slide-head type)
ISO 4703:1984 Acceptance conditions for surface grinding machines with two columns; Machines for grinding slideways; Testing of accuracy
ISO 3655-0:1976 Test conditions for vertical turning and boring lathes with one or two columns — Testing of the accuracy — Part 0: General introduction
ISO/TS 19466:2017 Electrically propelled mopeds and motorcycles — Test method for evaluating performance of regenerative braking systems
ISO 3875:2020 Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy
ISO 6395:2008 Earth-moving machinery - Determination of sound power level - Dynamic test conditions
ISO 7137:1987 Aircraft — Environmental conditions and test procedures for airborne equipment
ISO 16987:2003 Wood-based panels - Determination of moisture resistance under cyclic test conditions
ISO 15003:2019 Agricultural engineering — Electrical and electronic equipment — Testing resistance to environmental conditions
ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C
ISO 13041-2:2020 Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle
ISO 3655-1:1976 Test conditions for vertical turning and boring lathes with one or two columns — Testing of the accuracy — Part 1: Lathes with a single fixed or movable table
ISO 6393:2008 Earth-moving machinery - Determination of sound power level - Stationary test conditions

KR-KS, Double 85 test conditions

KS B ISO 4703-2022 Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of the accuracy
KS B ISO 11090-2-2020 Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy —Part 2: Double-column machines(slide-head type)
KS R ISO TS 19466-2021 Electrically propelled mopeds and motorcycles — Test method for evaluating performance of regenerative braking systems
KS B ISO 6395-2017 Earth-moving machinery — Determination of sound power level — Dynamic test conditions
KS B ISO 13041-6-2018 Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece
KS B ISO 3875-2019 Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy
KS B ISO 6155-2019 Machine tools — Test conditions for horizontal spindle turret and single spindle automatic lathes — Testing of the accuracy
KS B ISO 13041-2-2018 Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle

Standard Association of Australia （SAA）, Double 85 test conditions

AS/NZS 1580.602.2:1995 Paints and related materials - Methods of test - Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
AS 1731.4:2003(R2013)
AS 1731.4:2003/Amdt 1:2005
AS/NZS 1580.101.4:1999 Paints and related materials - Methods of test - Conditions of test - Temperature control
AS 1580.401.5:2002(R2013)
AS/NZS 3849:1999 Wool - IWTO Condition Testing Regulations for Wool Tops
AS 1580.401.6:2002(R2013)
AS/NZS 1580.101.5:1999 Paints and related materials - Methods of test - Conditions of test - Temperature and humidity control
AS 1580.401.5:1993 Paints and related materials - Methods of test Method 401.5: Hard dry condition - Sanding test
AS ISO 6393:2019 Earth-moving machinery — Determination of sound power level — Stationary test conditions
AS ISO 6395:2020 Earth-moving machinery — Determination of sound power level — Dynamic test conditions
AS 2313.1.9:2005 Methods of test for single and double sided pressure-sensitive adhesive tape - Adhesion - Resistance to shear peel at elevated temperature

Korean Agency for Technology and Standards (KATS), Double 85 test conditions

KS B ISO 11090-2:2020 Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy —Part 2: Double-column machines(slide-head type)
KS A 1545-2004 Conditioning of packaged freights test
KS B ISO 4703:2014 Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of the accuracy
KS B ISO 4703:2010 Test conditions for surface grinding machines with two columns-Machines for grinding slideways-Testing of the accuracy
KS A 0006-2014(2019) Standard atmospheric conditions for testing
KS W 0923-2003 AIRBORNE EQUIPMENT - ENVIRONMENTAL CONDITIONS AND TEST PROCEDURES
KS R ISO TS 19466:2021 Electrically propelled mopeds and motorcycles — Test method for evaluating performance of regenerative braking systems
KS W 7012-1987(2002) ENVIRONMENTAL CONDITIONS AND TEST PROCEDURES FOR AIRBORNE EQUIPMENT
KS W 7012-1987 ENVIRONMENTAL CONDITIONS AND TEST PROCEDURES FOR AIRBORNE EQUIPMENT
KS B ISO 6395:2017 Earth-moving machinery — Determination of sound power level — Dynamic test conditions
KS B ISO 13041-6:2018 Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece
KS F 2257-9-2008 Methods of fire resistance test for elements of building construction-Specific requirements for non-loadbearing ceiling elements
KS F 2257-9-2013 Method of fire resistance test for elements of building construction ― Specific requirements for non-loadbearing ceiling elements
KS B ISO 3875:2019 Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy
KS I ISO 6395:2004 Acoustics-Measurement of exterior noise emitted byearth-moving machinery-Dynamic test conditions
KS F ISO 16987:2006 Wood-based panels-Determination of moisture resistance under cyclic test conditions
KS B 4213-2006 Test conditions for milling machines with table of variable height－Testing of accuracy－Part 3：Machines with vertical spindle
KS F 2230-1999(2014) General test conditions of polystyrene composite wood wool cement boards
KS F ISO 16987:2013 Wood-based panels－Determination of moisture resistance under cyclic test conditions
KS B 4213-1986 Test conditions for milling machines with table of variable height－Testing of accuracy－Part 3：Machines with vertical spindle
KS B 7950-2022 Tractors for agriculture and forestry — Two-post roll-over protective structures — Virtual statistic test method and acceptance conditions
KS B 50061-1-2006 Automatic gravimetric filling instruments-Part 1:Metrological and technical requirements-Tests
KS F 2230-1999 General test conditions of polystyrene composite wood wool cement boards
KS M 3090-1994(1999) STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING OF PLASTICS
KS B ISO 6395-2017(2022) Earth-moving machinery — Determination of sound power level — Dynamic test conditions
KS C IEC 60068-3-11-2014(2019) Environmental testing — Part 3-11: Supporting documentation and guidance — Calculation of uncertainty of conditions in climatic test chambers
KS B 4212-2013 Test conditions for turret and single spindle co－ordinatedrilling machines with vertical spindle－Testing of the accuracy
KS B ISO 6155:2019 Machine tools — Test conditions for horizontal spindle turret and single spindle automatic lathes — Testing of the accuracy
KS B ISO 13041-2:2018 Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle
KS I ISO 6393:2002 Acoustics-Measurement of exterior noise emitted by earth-moving machinery-Stationary test conditions
KS C IEC 62670-1:2016 Photovolatic concentrators(CPV) ― Performance testing ― Part 1: Standard conditions

YU-JUS, Double 85 test conditions

JUS N.M1.310-1992 Safety requirements for commercial electrical appliances. Electric bains-marie. Particular technical conditions and tests
JUS N.C0.030-1980 Testing offlacible cords and cables. General testing conditions
JUS N.R7.065-1980 Printe? boards. Test methods. Environmented conditioning
JUS M.C5.013-1988 Technical conditions of delivery for valves, survey of test
JUS U.N4.025-1990 Domestic chimneys. Test canditions and criteria of assessment
JUS N.A5.005-1979 Standard conditions for testirrg ofsolid insukting materiak
JUS N.M2.040-1990 Safety requlrements. Electrical sawing machines. Particular technical cortditions and tests
JUS N.R7.065/1-1991 Printed boards. Test methods. Environmental conditioning. Supplements
JUS N.M2.104-1985 Safety requirements. Room air-conditioners. Particular technical conditions and tests
JUS N.M2.011-1990 Safety regulrements. Electrical pumps. Particular technical ccmditions and tests
JUS N.M2.070-1983 Safety requlrements.Electric fans.Particular technical conditions and tests
JUS N.M2.060-1990 Safety reguirements. Electrical clocks. Particular technical conditions and tests
JUS N.M2.075-1992 Safety requirements. Range hoods. Particular technical conditions and tests
JUS N.C0.030-1987 E/etric povver and lighting. Testing of insulated conductors and cab/es. General testing conditions
JUS N.M2.110-1989 Safety requirem&nts. Washing machines. Particular technical conditions and tests
JUS N.M1.130-1989 Safety reguirements. Electric irons. Particular technical conditions and tests
JUS N.M2.180-1980 Safety reguirements. Projectors. Particular technical conditions and tests.
JUS N.M1.027-1990 Safety regulrements. fiarming plates. Particular technical condltions and tests
JUS N.M2.130-1989 Safety requirenents. Dishwasbers. Particular technical conditions and tests
JUS N.M1.028-1992 Safety requirements. Microwave ovens. Particular technical conditions and tests
JUS N.M1.302-1989 Safety requJrameats for cammerclal eloctric appliances. Deep fat fryers. Partlcular technlcal conditions and tests
JUS N.M1.100-1989 Safety reguirements. Electric vvater storage heaters. Particular technical conditions and tests
JUS N.M6.001-1985 Hand-heldmotor-operated electric tools. Safety requirements. General conditions and tests
JUS N.M1.024-1979 Safety reguirements. Thermal storage appliances. Particular tehnical conditions and tests
JUS N.M1.308-1992 Safety requirements for commercial electrical appliances. Particular technical conditions and tests
JUS M.J5.013-1994 Test conditJcms for horiag and milling machincs nith horizontal spindle - Testing of the accuracy - Part II: Floor typn mac.hines
JUS N.M2.105-1985 Safety reguirements. Motor-compressors. Particular technical conditions and tests.
JUS N.M1.020-1989 Safev/ reauirements. Electrical cooking ranges. Particular technical conditions and tests
JUS M.G4.020-1994 Machine tools - Acceptance conditions for plano-milling machines - Testing of the accuracy - Portal-type machines

SE-SIS, Double 85 test conditions

SIS SS 3484-1983 Woodworking machines — Measurement of noise — Operating conditions for double-end sizing and edge banding machines
SIS 11 21 19 E-1963 Dragprovstavar typ J
SIS 02 01 21-1968 Atmospheric conditions and time for testing
SIS SS-ISO 1708:1986 Test conditions for general purpose parallel lathes-Testing of the accuracy
SIS SS 3485-1983 Woodworking machines ~ Measurement of noise - Operating conditions for two-side and multi-side planing and moulding machines
SIS SS 3276-1978 Test conditions for general purpose parailel lathes — Testing of the accuracy
SIS SS 3277-1978 Test conditions for general purpose parallel lathes — Testing of the accuracy for precision lathes
SIS SS IEC 398:1989 Industrial electro-heating equipment — General test conditions for electro-heating appliances
SIS SS 3279-1978 Test conditions for milling machines with table of fixed height with horizontal or vertical spindle — Testing of the accuracy
SIS SS IEC 212:1982 Standard conditions for use prior to and during the testing of solid electrical insulating materials
SIS SMS 2513-1974 Freezers for household use. Freezing test corresponding to storage conditions
SIS SS-ISO 1701:1992 Test conditions for milling machines with table of variable height, with horizontal or vertical splndle — Testing of accuracy
SIS SS 3278-1978 Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Testing of the accuracy
SIS 21 91 30 E-1964 General technical conditions of supply, including inspection and testing procedures

RO-ASRO, Double 85 test conditions

STAS SR ISO 2419:1996 Leather - Conditioning of test pieces for physical tests
STAS SR ISO 3048:1996 Gypsum plasters - General test conditions
STAS 10060-1975 ELECTRON 1C MEASURING INSTRUMENTS Environmental test conditions
STAS 8297/4-1981 HOUSEHOLD SEWING MACHINES General test conditions
STAS SR ISO 2772-2:1996 Test conditions for box type vertical drilling machines - Testing of the accuracy - Part 2: Practicai test
STAS SR ISO 2772-1:1996 Test conditionc for box type vertical drilling machines - Testing of the accuracy - Part 1: Geometrical tests
STAS R 12007/3.1-1989 Equipment reliability testing PREFERRED TEST CONDITIONS Indoor portable equipment
STAS SR ISO 3875 Acceptance conditions for externai cylindrical centreless grinding machines - Testing of the accuracy
STAS SR ISO 6480:1995 Conditions of. acceptance for horizontal internai broaching machines - Testing of the accuracy
STAS SR 13280-1995 Machine tools-Vertical band saws-Acceptance conditions - Testing of accuracy
STAS 10075/3-1975 Commercial refrigerated cabinets REFRIGERATED DISPLAY CABINETS General test conditions
STAS 11115/1-1988 A ireraft ENVIBONMKNTAL CONDITIONS AND TEST PROCEDURES FOR AIRBORNE EQKIPMKNT
SR ISO 4440-2:1996 Thermoplastics pipes and fittings - Determination of melt mass flow rate - Part 2: Test conditions

Association Francaise de Normalisation, Double 85 test conditions

NF E60-126*NF ISO 4703:2001 Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy
NF E60-134-2*NF ISO 11090-2:2015 Test conditions for die sinking electro-discharge machines (die sinking EDM) - Testing of accuracy - Part 2 : double-column machines (slide-head type)
NF E64-068:1982 Woodworking machines. Conditions of acceptance and nomenclature for multiblade double edging circular saws. Precision testing.
XP C93-539:2016 Test on fire-resistant optical fibre cables under fire conditions
NF X15-015:1973 MEASUREMENT OF RELATIVE HUMIDITY BY MEANS OF ELECTROLYTIC HYGROMETERS.
NF ISO 14137:2015 Conditions d'essai des machines d'électroérosion à fil (fil EDM) - Contrôle de l'exactitude
NF E60-134-2:2000 Machines tools - Test conditions for die sinking electro-discharge machines (EDM) -Terminology and testing of the accuracy - Part 2 : two column machines (slide-head type and cross-slide table type).
NF E60-172-7*NF ISO 10791-7:2020 Test conditions for machining centres - Part 7 : accuracy of finished test pieces
NF E60-102:1976 Test conditions for numerical control parallel lathes. Testing of the accuracy.
NF E60-127:2017 Machine tools - Vertical grinding machines - Acceptance conditions - Testing of accuracy
XP B44-014*XP CEN/TS 16599:2014 Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions
NF ISO 3408-3:2006 Vis à billes - Partie 3 : conditions et essais de réception
NF EN 16905-3:2017 Pompes à chaleur à moteur endothermique alimenté au gaz - Partie 3 : conditions d'essai
NF EN ISO 6369:2023 Machines à glaçons à usage commercial - Classification, exigences et conditions d'essai
NF R16-322:1985 Véhicules routiers - Essai de pompe d'injection à gazole - Conditions statiques.
NF X30-465*NF EN 14405:2017 Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions)
NF EN 14405:2017 Caractérisation des déchets - Essais de comportement à la lixiviation - Essai de percolation à écoulement ascendant (dans des conditions spécifiées)
NF B51-129*NF EN 321:2002 Wood-based panels - Determination of moisture resistance under cyclic test conditions
NF P20-529*NF EN 13420:2011 Windows - Behaviour between different climates - Test method
NF E62-154:1985 Machine tools. Hack sawing machines. Acceptance conditions. Testing of accuracy.
NF E62-155:1985 Machine tools. Vertical band saws. Acceptance conditions. Testing of accuracy.
NF E62-156:1985 Machines tools. Horizontal band saws. Acceptance conditions. Testing of accuracy.
NF E60-101*NF ISO 1708:1997 Acceptance conditions for general purpose parallel lathes. Testing of the accuracy.
NF D74-206*NF EN ISO 22044:2022 Commercial beverage coolers - Classification, requirements and test conditions
NF EN ISO 22044:2022 Meubles frigorifiques de vente pour boissons - Classification, exigences et conditions d'essai
NF E60-140*NF ISO 14137:2015 Test conditions for wire electrical-discharge machines (wire EDM) - Testing of the accuracy
NF E58-022*NF ISO 6395:2008 Earth moving machinery - Determination of sound power level - Dynamic test conditions
NF C26-200:1973 Methods of testing insulating materials. Standard conditions for usterials.
NF EN 62670-1:2014 Concentrateurs photovoltaïques (CPV) - Essai de performance - Partie 1 : conditions normales
NF ISO 2772:2019 Conditions d'essais des perceuses verticales à montant (perceuses-aléseuses) - Contrôle de l'exactitude
NF EN 13087-1:2000 Casques de protection - Méthodes d'essai - Partie 1 : conditions et conditionnement
NF EN 13087-1/A1:2002 Casques de protection - Méthodes d'essai - Partie 1 : conditions et conditionnement
NF ISO 6393:2008 Engins de terrassement - Détermination du niveau de puissance acoustique - Conditions d'essai statique
NF ISO 6395:2008 Engins de terrassement - Détermination du niveau de puissance acoustique - Conditions d'essai dynamique
NF ISO 13041-6:2009 Conditions d'essai des tours à commande numérique et des centres de tournage - Partie 6 : exactitude d'une pièce d'essai usinée
NF EN ISO 9142:2004 Adhésifs - Guide pour la sélection de conditions normales d'essai de vieillissement en laboratoire des assemblages collés
NF E64-064:1983 Woodworking machines. Acceptance conditions and nomenclature for double-end tenoning and profiling machines. Precision testing.
NF EN 300019-1-2:2014 Ingénierie de l'environnement (EE) - Conditions et essais d'environnement des équipements de télécommunications - Partie 1-2 : classification des conditions d'environnement - Transport (V2.2.1)
NF EN 300019-1-1:2014 Ingénierie de l'environnement (EE) - Conditions et essais d'environnement des équipements de télécommunications - Partie 1-1 : classification des conditions d'environnement - Stockage (V2.2.1)
NF E60-132-2*NF ISO 2773-2:1997 Test conditions for pillar type vertical drilling machines. Testing of the accuracy. Part 2 : practical test.
NF C44-052-31*NF EN 62052-31:2017 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31 : product safety requirements and tests
NF E58-020*NF ISO 6393:2008 Earth-moving machinery - Determination of sound power level - Stationary test conditions

American National Standards Institute （ANSI), Double 85 test conditions

ANSI/ATIS 0600020.a-2012 Pb-Free Circuit Pack Testing Waive Conditions

NO-SN, Double 85 test conditions

NS 5655-1980 Test conditions for precision lathes - Testing of accuracy
NS 5654-1980 Test conditions for standard lathes - Testing of the accuracy

AIA/NAS - Aerospace Industries Association of America Inc., Double 85 test conditions

NASM1312-13-1997 Fastener Test Methods; Method 13 Double Shear Test
NASM1312-13-2013 FASTENER TEST METHODS METHOD 13 DOUBLE SHEAR TEST (Rev 2)
NAM1312-113-1997 Fastener Test Methods@ Metric; Method 113 Double Shear Test
NASM1312-28-1997 Fastener Test Methods; Method 28@ Elevated Temperature Double Shear
NAM1312-113-2012 FASTENER TEST METHODS@ METRIC METHOD 113 DOUBLE SHEAR TEST (Rev 1)
NASM1312-13-2003 Fastener Test Methods; Method 13 Double Shear Test (Rev 1)
NASM1312-28-2012 FASTENER TEST METHODS METHOD 28 ELEVATED TEMPERATURE DOUBLE SHEAR (Rev 1)

VN-TCVN, Double 85 test conditions

TCVN 7691-2007 Test conditions for surface grinding machines with two columns.Machines for grinding slideways.Testing of the accuracy

British Standards Institution (BSI), Double 85 test conditions

BS ISO 4703:2001 Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy
BS EN 26599-1:1993 Packaging. Sacks. Conditioning for testing.. Paper sacks
BS EN 441-4:1995 Refrigerated display cabinets - General test conditions
BS ISO 6779:2019 Test conditions for vertical internal type broaching machines. Testing of accuracy
BS ISO 6480:2019 Test conditions for horizontal internal type broaching machines. Testing of accuracy
BS ISO 2772:2019 Test conditions for box type vertical drilling machines. Testing of the accuracy
22/30449725 DC BS ISO 6779 Test conditions for vertical internal type broaching machines. Testing of accuracy
BS ISO 2407:1997+A1:2016 Test conditions for internal cylindrical grinding machines with horizontal spindle. Testing of accuracy
BS ISO 9788:2017 Air cargo. Double stud tie-down fittings. Design and testing requirements
BS ISO 19744:2020 Test conditions for numerically controlled broaching machines. Testing of accuracy. Vertical surface type broaching machines
BS ISO 6481:2019 Test conditions for vertical surface type broaching machines. Testing of accuracy
BS EN 62670-1:2014 Photovoltaic concentrators (CPV). Performance testing. Standard conditions
PD 6577:1995 The influence of environmental conditions on the testing of textile materials
BS EN IEC 62052-11:2021+A11:2022 Electricity metering equipment. General requirements, tests and test conditions - Metering equipment
23/30439468 DC BS ISO 2407. Test conditions for internal cylindrical grinding machines with horizontal spindle. Testing of accuracy
18/30361451 DC BS ISO 10791-7. Test conditions for machining centres. Part 7. Accuracy of finished test piece
PAS 10621:2011 Multipoint locking assemblies. Dual mode egress. Performance requirements and test methods
BS ISO 21782-1:2019 Electrically propelled road vehicles. Test specification for electric propulsion components - General test conditions and definitions
BS 4G 229:1996 Schedule for environmental conditions and test procedures for airborne equipment
16/30327831 DC BS ISO 10791-7 AMD1. Test conditions for machining centres. Part 7. Accuracy of finished test pieces
BS PD CEN/TS 16599:2014 Photocatalysis. Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions
BS EN 321:2002 Wood-based panels - Determination of moisture resistance under cyclic test conditions
BS ISO 6395:2009 Earth-moving machinery. Determination of sound power level. Dynamic test conditions
BS ISO 6395:2008 Earth-moving machinery - Determination of sound power level - Dynamic test conditions
BS EN ISO 3452-5:2009 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures higher than 50 degrees C
BS EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures higher than 50 degrees C
16/30325091 DC BS ISO 3875. Machine tools. Test conditions for external cylindrical centreless grinding machines. Testing of the accuracy
18/30361448 DC BS ISO 3875. Machine tools. Test conditions for external cylindrical centreless grinding machines. Testing of the accuracy
BS ISO 8636-2:2007 Machine tools. Test conditions for bridge-type milling machines. Testing of the accuracy. Travelling bridge (gantry-type) machines
BS EN 61034-1:2005+A2:2020 Measurement of smoke density of cables burning under defined conditions - Test apparatus

Professional Standard - Railway, Double 85 test conditions

TB/T 2585-1995 ST&sub1;-600 type two-way brake shoe clearance adjuster test bench technical conditions
TB/T 3184-2007 Technical specification of detection euquipment for dynamic load testing of locomotive

Aerospace Industries Association, Double 85 test conditions

AIA NAM1312-113-1997 Fastener Test Methods, Metric; Method 113 Double Shear Test FSC 53GP
AIA NASM1312-28-1997 Fastener Test Methods; Method 28, Elevated Temperature Double Shear FSC 53GP

Aerospace Industries Association/ANSI Aerospace Standards, Double 85 test conditions

AIA/NAS NASM1312-13-2013 FASTENER TEST METHODS METHOD 13 DOUBLE SHEAR TEST (Rev 2)
AIA/NAS NASM1312-2013 FASTENER TEST METHODS METHOD 13 DOUBLE SHEAR TEST (Rev 2)
AIA/NAS NASM1312-28-2012 FASTENER TEST METHODS METHOD 28 ELEVATED TEMPERATURE DOUBLE SHEAR
AIA/NAS NAM1312-113-2012 FASTENER TEST METHODS, METRIC METHOD 113 DOUBLE SHEAR TEST (Rev 1)
AIA/NAS NASM1312-13-2003 Fastener Test Methods; Method 13 Double Shear Test Rev 1

Professional Standard - Machinery, Double 85 test conditions

JB/T 11793-2014 Diesel/biogas dual fuel engine.General technology and test methods
JB/T 8613-1997 Technical conditions for engine comprehensive test bench
JB/T 11943-2014 The technical conditions and test evaluation method for auto cold filter plugging point tester
JB/T 11945-2014 The technical conditions and test evaluation method for auto kinematic viscosity tester
JB/T 5381-2014 Technical specifications of screen distortion test target for overhead projectors
JB/T 5381-1991 Overhead projectors - Technical specification for image distortion test chart
JB/T 6744-1993 General technical specifications for dynamometers for low power motor test

Professional Standard - Post and Telecommunication, Double 85 test conditions

YD/T 596-1992 Technical conditions of white noise test sets
YD/T 758-1995 Technical conditions of line signal testers
YD/T 505-1991 Technical conditions for 10kHz - 100MHz transmission tester
YD/T 619-1993 34368Kbit/s bit error tester technical conditions
YD/T 617-1993 Technical conditions of PCM voice channel characteristics testers
YD/T 797-1996 Technical conditions of optical time domain reflectoscopes
YD/T 903-1997 Technical conditions of mode field diameters for optical fibers
YD/T 715-1994 General technical conditions for 15Hz - 30MHz noise tester
YD/T 796-1996 Technical conditions of mono-mode optical transmission attenuation tester
YD/T 598-1992 Technical conditions of mono-mode optical fiber time-domain reflectoscopes
YD/T 759-1995 Technical conditions of frame structure tester at 8 448, 34 368kbit/s
YD/T 515-1992 Technical conditions for multimode optical fiber frequency-domain bandwidth tester
YD/T 504-1991 Technical conditions for short-wave long optical time domain reflectoscopes

CZ-CSN, Double 85 test conditions

CSN 50 0303-1978 Paper testing —Methoil for conditioning f páper and board est samples
CSN 64 5401-1974 Testing of cellular materials. General conditions for testing of cellular materials
CSN 72 2112-1970 Physical and mechanical testing of cement. Sampling and generál coa- ditions of testing
CSN 18 0072-1984 Basic environmental testi ng procedures. Test Ka: Salt mist -constant conditlons
CSN 50 0304-1972 Paper testing ethod for conditioning f páper and board test amples. Method B
CSN 34 5614-1970 Test methods for testing of resistance of electrical apparatus to humid conditions
CSN 34 6401-1982 Conditions for use prior to and during the testing of solid electrical insulating materials
CSN 80 0056-1981
CSN 01 1616-1989 Noise. Reference sound source. Technical conditions and testing methods
CSN 67 3008-1984 Paints and varnishes Standard conditions for conditioning and testing
CSN ISO 3875:1992 Acceptance conditions for external cylindrical centreless grinding machines — Testing of the accuracy
CSN 35 6507-1982 Electronic measuring instrumenta. Fundamental terms, definitions and generál tesling conditions
CSN 03 8110-1978 Testing of atmospheric corrosion resistance in functional conditiona and on atmospheric test stations
CSN ISO 2772-1:1993 Test conditions for box type vertical drilling machines - Testing of the accuracy - Part 1: Geometrical tests
CSN ISO 2772-2:1993 Test conditions for box type vertical drilling machines - Testing of the accuracy - Part II: Practical test
CSN ISO 2773-1:1994 Test conditions for pillar type vertical drilling machines - Testing of the accuracy - Part 1: Geometrical tests
CSN ISO 2773-2:1994 Test conditions for pillar type vertical drilling machines - Testing of the accuracy Part II: Practical test
CSN 72 5021-1973 Testing of fired ceramic materials. Determination of the modullus of elasticity in tension
CSN 34 5682-1974 Climatic test of electrical devices designed to be used in animal production conditions
CSN 63 1534-2 Z2-1999
CSN 37 0611-1960 Testing of pressure mechanical connections of aluminium oonductors for normal service conditions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Double 85 test conditions

GB/T 14077-1993 Measurement specification for birefractance crystal and polarizer
GB/T 9039-1988 Technical condition for transmission measuring set 10kHz to 18.6MHz
GB/T 14075-2008 Specifications for optical fibre chromatic dispersion measuring set
GB/T 15394-1994 General specification for probe tester
GB/T 13855-1992 Technical conditions for channel transmission automatic test equipment
GB/T 15472-1995 Generic specification and test method for distortion meters
GB/T 10263-2006 Environmental conditions and test procedures for nuclear radiation detectors
GB/T 12624-2009 Protective gloves.General requirements and test methods
GB/T 15471-1995 General specification and test method for logic analyzers
GB 14887-1994 The technical conditions and testing methods for rood traffic signals
GB/T 5262-1985 Measuring methods for agricultural machinery testing conditions--General rules
GB/T 5262-2008 Measuring methods for agricultural machinery testing conditions.General rules
GB/T 15405-2006 Thermal specifications and testing method for passive solar houses
GB/T 25614-2010/ISO 6395:2008 Dynamic test conditions for the determination of sound power levels of earth-moving machinery
GB/T 25614-2010/ISO 6395-2008 Dynamic test conditions for the determination of sound power levels of earth-moving machinery
GB/T 25612-2010/ISO 6393:2008 Determination of sound power level of earth-moving machinery Set-up test conditions
GB/T 25612-2010 Earth-moving machinery.Determination of sound power level.Stationary test conditions
GB/T 25614-2010 Earth-moving machinery.Determination of sound power level.Dynamic test conditions
GB/T 15289-1994 General specification and test method for digital storage oscilloscopes
GB/T 15405-1994 Specifications and testing method of thermal performance for passive solar houses

Danish Standards Foundation, Double 85 test conditions

DS/EN 20187:1993 Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
DS 2191.6:1984 Measurement of noise from woodworking machines. Part 6: Operating conditions for double-end profiling machines
DS/EN 26599-1:1993 Packaging. Sacks. Conditioning for testing. Part 1: Paper sacks
DS/CEN/TS 14405:2004 Characterization of waste - Leaching behaviour tests - Up-flow percolation test (under specified conditions)
DS/EN 321:2002 Wood-based panels - Determination of moisture resistance under cyclic test conditions
DS/EN 13087-1/A1:2002 Protective helmets - Test methods - Part 1: Conditions and conditioning
DS/EN 13087-1:2000 Protective helmets - Test methods - Part 1: Conditions and conditioning
DS/EN 60068-3-11:2007 Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers

ZA-SANS, Double 85 test conditions

SANS 5807:1979 Pesticides: Test rooms, test conditions, test equipment, and test insects and their handling

(U.S.) Ford Automotive Standards, Double 85 test conditions

FORD WZ102-2013 Fastener - Torque/clamp force testing - Standard Conditions

ES-AENOR, Double 85 test conditions

PL-PKN, Double 85 test conditions

PN M43120-1972 Fans noise testing methodes nd conditions
PN E04400-1972 Solid insulating materials Standart conditions prior and during ?he testing
PN H04638-1972 Corrosion protection Corrosion tests in storage conditions
PN H04637-1972 Corrosion protection Corrosion tests in natural atmospheric conditions
PN T06251 ArkusZ05-1974 Broadcasting receivers Test programme conditions and their evaluation
PN T06500 ArkusZ4-1971 Electronic measuring e?uipments Specifying and tests methods for parametefrs and) errors
PN B06050-1968 Earth works in building Specifications for executing and acceptance testing
PN B10241-1971 Roofing Covering with deramic sia?es Conditions for construction and accep?ance ?es?ing

IL-SII, Double 85 test conditions

S.I.535-1964 WASTE PAPER : CONDITIONS OF ACCEPTANCE AND METHODS OF TEST

邮电部, Double 85 test conditions

YD/T 618-1993 139264kbit/s Error Tester Technical Conditions
YD/T 616-1993 2048, 8448, 34368, 139264kbit/s digital transmission tester technical conditions
YD/T 615-1993 64, 2048, 8448, 34368kbit/s phase jitter tester technical conditions

German Institute for Standardization, Double 85 test conditions

DIN 685-100:2022 Round steel link chains, components and accessories, tested - Part 100: Additional terms; Text in German and English
DIN EN 60051-9:2017 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 9: Recommended test methods (IEC 85/577/CD:2017)
DIN ISO 2407:1999-12 Machine tools - Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy (ISO 2407:1997)
DIN 58142:2006 Testing of fibre optic elements - Determination of the resistance against environmental conditions
DIN CEN/TS 16599:2014-07*DIN SPEC 7397:2014-07 Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions; German version CEN/TS 16599:2014
DIN ISO 6545:1997-09 Acceptance conditions for gear hobbing machines - Testing of the accuracy (ISO 6545:1992)
DIN EN ISO 22043:2023-02 Ice-cream freezers - Classification, requirements and test conditions (ISO 22043:2020); German version EN ISO 22043:2020
DIN EN 14405:2017-05 Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions); German version EN 14405:2017
DIN EN 321:2002 Wood-based panels - Determination of moisture resistance under cyclic test conditions; German version EN 321:2001
DIN EN 321:2002-03 Wood-based panels - Determination of moisture resistance under cyclic test conditions; German version EN 321:2001
DIN 65151:2002-08 Aerospace series - Dynamic testing of the locking characteristics of fasteners under transverse loading conditions (vibration test)
DIN 685-100:2022-01 Round steel link chains, components and accessories, tested - Part 100: Additional terms; Text in German and English
DIN EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment (IEC 62052-11:2003); German version EN 62052-11:2003
DIN 51817:2014-08 Testing of lubricants - Determination of oil separation from greases under static conditions
DIN ISO 3408-3:2011-04 Ball screws - Part 3: Acceptance conditions and acceptance tests (ISO 3408-3:2006)
DIN EN 13087-1:2000-06 Protective helmets - Test methods - Part 1: Conditions and conditioning; German version EN 13087-1:2000
DIN 18137-1:2010-07 Soil, investigation and testing - Determination of shear strenght - Part 1: Concepts and general testing conditions
DIN EN 20187:1993 Paper, board and pulps; standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990); German version EN 20187:1993
DIN 19242-3:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: conditional branch

(U.S.) Telecommunications Industries Association , Double 85 test conditions

TIA PN 3-0280-2007 Test source launch condition guidelines for testing installed multimode cabling To be published as TIA TSB-178

TR-TSE, Double 85 test conditions

TS 3073-1978 Ropes - Sampling And Conditioning For Testing
TS 636-1968 METHOD FOR THE CONDITIONING OF PAPER AND BOARD TEST SAMPLES

Professional Standard - Electricity, Double 85 test conditions

DL/T 963-2005 General technical specifications of the transformation ratio tester
DL/T 1953-2018 General technical requirements for capacitance current tester
DL/T 962-2005 General technical specifications of the high voltage dieletric loss detector
DL/T 1221-2013 Universal specification for transformer characteristic tester
DL/T 1305-2013 General technical specification for transformer oils dissipation factor tester
DL/T 1516-2016 General technical conditions for relative dielectric loss and capacitance testers
DL/T 1951-2018 General technical requirements for transformer winding deformation tester
DL/T 1955-2018 General specifications for merging unit testers for metrology
DL/T 846.13-2020 General Specifications for High Voltage Test Equipment Part 13: Arrester Monitor Testers
DL/T 846.12-2016 General Specifications for High Voltage Test Equipment Part 12: Power Capacitance Tester
DL/T 1256-2013 General specification of transformer tester for no-load loss and load loss
DL/T 1399.1-2014 Electric power testing and measuring vehicles.Part 1: General specifications
DL/T 1416-2015 General technical specifications for ultrasonic based partial discharge tester
DL/T 1119-2010 General technical conditions of measuring instruments for power frequency parameters of transmission lines
DL/T 2621-2023

Professional Standard - Traffic, Double 85 test conditions

JT/T 117-1993 Specifications for the strenth tester of the stablized soil
JT/T 692-2007 Test method for colorimetric charactedstics of retrorenectors under nighttime conditions

Professional Standard - Petroleum, Double 85 test conditions

SY/T 5166-2007 Technical specifications of pumping well tester
SY/T 5377-2013 Specifications for drilling fluid testing instruments
SY 5377-2013 Technical conditions of drilling fluid parameter testing equipment
SY/T 6371-1998 General technical standard for geophone tester
SY/T 6371-2012 General technical specification for geophone tester
SY 6371-2012 General specifications for geophone testers

AENOR, Double 85 test conditions

UNE 15321:2003 Internal cylindrical grinding machines with horizontal spindle. Test conditions. Testing of the accuracy.
UNE 15600-2:2005 Machine-tools. Test conditions for die sinking eletro-discharge machines (EDM). Terminology and testing of accuracy. Part 2: Two column machines (slide head type and cross slide table type)
UNE 15410:1997 ACCEPTANCE CONDITIONS FOR GEAR HOBBING MACHINES. TESTING OF THE ACCURACY.
UNE-ISO 6395:2013 Earth-moving machinery. Determination of sound power level. Dynamic test conditions
UNE 15323:2004 Horizontal spindle turret and single spindle automatic lathes. Test conditions. Testing of the accuracy
UNE-EN 14405:2017 Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions)
UNE 15320:2006 Machine tools. Test conditions for external cylindrical centreless grinding machines. Testing of the accuracy
UNE 15450-7:2000 Machine-tools. Test conditions for machining centres. Part 7: Accuracy of a finished test piece.
UNE 15325:1993 CONDITIONS OF ACCEPTANCE FOR HORIZONTAL INTERNAL BROACHING MACHINES. TESTING OF THE ACCURACY.
UNE 28544:1984 AICRAFT. ENVIROMENTAL CONDITIONS AND TEST PROCEDURES FOR AIRBORNE EQUIPMENT.
UNE 15327:1993 ACCEPTANCE CONDITIONS FOR BROACHING MACHINES OF VERTICAL INTERNAL TYPE. TESTING OF THE ACCURACY.
UNE 15326:1993 ACCEPTANCE CONDITIONS FOR VERTICAL SURFACE TYPE BROACHING MACHINES. TESTING OF ACCURACY.
UNE-EN 321:2002 Wood-based panels - Determination of moisture resistance under cyclic test conditions.
UNE 15329:1993 ACCEPTANCE CONDITIONS FOR COPYING ATTACHMENTS, INTEGRAL OR OTHERWISE, FOR LATHES. TESTING OF ACCURACY.
UNE 15330:2008 Underfloor wheel lathe for the reprofiling of railway wheels. Test conditions. Testing of the accuracy.
UNE 15319:2004 External cylindrical and universal grinding machines with a movable table. Test conditions. Testing of the accuracy.
UNE 15328:1992 ACCEPTANCE CONDITIONS OF OPEN FRONT MECHANICAL POWER PRESSES. TESTING OF THE ACCURACY.
UNE-ISO 6393:2009 Earth-moving machinery -- Determination of sound power level -- Stationary test conditions
UNE-EN 13087-1/A1:2002 Protective helmets - Test methods - Part 1: Conditions and conditioning.
UNE-EN 13087-1:2000 PROTECTIVE HELMETS - TEST METHODS - PART 1: CONDITIONS AND CONDITIONING
UNE 15317:2004 Surface grinding machines with two columns. Machines for grinding slideways. Test conditions. Testing of the accuracy.

BR-ABNT, Double 85 test conditions

ABNT NBR ISO 6393:2011 Machinery - Determination of sound power level - static test conditions

American Society for Testing and Materials (ASTM), Double 85 test conditions

ASTM F1181-96(2003) Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM F1181-96 Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM F1181-19 Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM F1181-09(2014) Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM F1181-09 Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM D1349-14 Standard Practice for Rubbermdash;Standard Conditions for Testing
ASTM D6918-09 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
ASTM D6918-09(2014)e1 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
ASTM D6918-09(2022) Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
ASTM E1333-96(2002) Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
ASTM E1333-96 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
ASTM E1333-22 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber

ES-UNE, Double 85 test conditions

UNE 15321:2003 ERRATUM Internal cylindrical grinding machines with horizontal spindle. Test conditions. Testing of the accuracy.
UNE-EN ISO 22043:2022 Ice-cream freezers - Classification, requirements and test conditions (ISO 22043:2020)
UNE-EN ISO 22044:2022 Commercial beverage coolers - Classification, requirements and test conditions (ISO 22044:2021)
UNE-EN 60212:2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials (Endorsed by AENOR in October of 2011.)
IEC 60332:2023 SER Tests on electric and optical fibre cables under fire conditions - ALL PARTS
UNE-EN 62052-31:2016 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests (Endorsed by AENOR in September of 2016.)

Group Standards of the People's Republic of China, Double 85 test conditions

T/CPIA 0019.1-2020 Test method for electrical parameters of double-sided photovoltaic modules Part 1: Double-sided simultaneous illumination method
T/CSEE 0226-2021 Specifications for Insulation Frequency Domain Dielectric Spectrum Test Device
T/CPIA 0019.2-2020 Test methods for electrical parameters of bifacial photovoltaic modules Part 2: Formula method
T/CEC 542.1-2021 General Specifications for Gas Test Instruments for Electric Power Part 1: Gas Humidity Test Instruments

PT-IPQ, Double 85 test conditions

NP 1760-1984

European Committee for Standardization (CEN), Double 85 test conditions

EN 10045-1:1990 Metal Products, Mechanical Tests, Charpy Impact Tests, Test Specimens, Testing Conditions
CEN/TS 16599:2014 Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions
EN 441-4:1994 Refrigerated Display Cabinets - Part 4: General Test Conditions
EN 592:2002 Instructions for Use in Vitro Diagnostic Instruments for Self-Testing
EN 321:2001 Wood-based panels - Determination of moisture resistance under cyclic test conditions
EN 592:1994 In Vitro Diagnostic Systems - Requirements for User Manuals for In Vitro Diagnostic Instruments for Home Use

Indonesia Standards, Double 85 test conditions

SNI 06-0900-1989 Room condition for plastic stabilizing and test
SNI 06-0243-1989 Test method of enamel resistance to weak acid at room temperature
SNI IEC 62052-11:2011 “Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment”

European Committee for Electrotechnical Standardization（CENELEC）, Double 85 test conditions

HD 353-1976 General Test Conditions for Industrial Electro- Heating Equipment
EN 62052-31:2016 Electricity metering equipment (AC) - General requirements@ tests and test conditions - Part 31: Product safety requirements and tests
EN 62670-1:2014 Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standard conditions

US-RTCA, Double 85 test conditions

RTCA DO-160A-1980 Environmental Conditions and Test Procedures for Airborne Equipment
RTCA DO-160D-1997 Environmental Conditions and Test Procedures for Airborne Equipment
RTCA DO-160F-2007 Environmental Conditions and Test Procedures for Airborne Equipment
RTCA DO-160A-1980/0625 Environmental Conditions and Test Procedures for Airborne Equipment

RTCA - RTCA@ Inc., Double 85 test conditions

RTCA DO-160A-2010 Environmental Conditions and Test Procedures for Airborne Equipment
RTCA DO-160G CHG 1-2014 Environmental Conditions and Test Procedures for Airborne Equipment
RTCA DO-160D CHG 3-2002 Environmental Conditions and Test Procedures for Airborne Equipment
RTCA DO-160D CHG 2-2001 Environmental Conditions and Test Procedures for Airborne Equipment
RTCA DO-160B-1984 Environmental Conditions and Test Procedures for Airborne Equipment
RTCA DO-160D CHG 1-2000 Environmental Conditions and Test Procedures for Airborne Equipment

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, Double 85 test conditions

CEPT T/L 02-12 E-1988 Environmental Conditions and Environmental Tests for Telecommunications Equipment

Professional Standard - Chemical Industry, Double 85 test conditions

HG/T 2382-1992 General technical requirements for rubber testing instruments and equipment

Military Standard of the People's Republic of China-General Armament Department, Double 85 test conditions

GJB 9082-2017 Minimum launch conditions for launch vehicle test launch

工业和信息化部/国家能源局, Double 85 test conditions

JB/T 12726-2016 General technical conditions for non-destructive testing instrument samples

HU-MSZT, Double 85 test conditions

IEC - International Electrotechnical Commission, Double 85 test conditions

IEC 60160:1963 Standard Atmospheric Conditions for Test Purposes (Edition 1.0)

Jiangsu Provincial Standard of the People's Republic of China, Double 85 test conditions

DB32/T 3800-2020 General technical conditions and test methods for smart bracelets

未注明发布机构, Double 85 test conditions

BS EN 441-4:1995(1999) Refrigerated display cabinets — Part 4 : General test conditions
BS ISO 6395:2008(2009) Earth - moving machinery — Determination of sound power level — Dynamic test conditions
BS ISO 3408-3:2006(2010) Ball screws — Part 3 : Acceptance conditions and acceptance tests
BS EN 50268-2:2000 Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2: Procedure
VDI VDE 2602 Blatt 3-2012 Surface testing Specification of surface conditions in technical product documentation Surface measurement Specification of surface conditions in technical product documentation
VDI VDE 2602 Blatt 3-2018 Surface testing, specification of surface conditions in technical product documentation, Surface measurement, Specification of surface conditions in technical product documentation

国家能源局, Double 85 test conditions

NB/T 10171-2019 Technical conditions of mining water pump operating parameter tester
NB/T 10170-2019 Technical conditions of mine main ventilator operating parameter tester

AT-ON, Double 85 test conditions

ONORM M 7610-1977 Standard atmospheres for conditioning and/or testing of materials, structural components and equipment
ONORM M 7823 Teil.2-1982 Gas welding rods for Joint welding of unalloyed and low-alloyed steels; test to determine the suitability under manufacturing conditions
ONORM S 3020-1980 Hollow-warefor electric cookers; enamelled hollow-ware ofsheet steel, requirements and fest condltions

CEN - European Committee for Standardization, Double 85 test conditions

PD CEN/TS 14405:2004 Characterization of waste - Leaching behaviour tests - Up-flow percolation test (under specified conditions)
EN 321:1993 Fibreboards - Cyclic Tests in Humid Conditions

BELST, Double 85 test conditions

STB 1641-2019 Road vehicles. Requirements to technical condition accroding to traffic safety terms. Test methods

GOSTR, Double 85 test conditions

GOST ISO 3875-2017 Machine tools. Test conditions for external cylindrical centreless grinding machines. Testing of the accuracy

CL-INN, Double 85 test conditions

INDITECNOR 34-I4ch-1957

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Double 85 test conditions

JEDEC JESD51-8-1999 Integrated Circuit Thermal Test Method Environmental Conditions - Junction-to-Board

Lithuanian Standards Office , Double 85 test conditions

LST EN 321-2002 Wood-based panels - Determination of moisture resistance under cyclic test conditions
LST EN 13087-1-2001 Protective helmets - Test methods - Part 1: Conditions and conditioning
LST EN 13087-1-2001/A1-2002 Protective helmets - Test methods - Part 1: Conditions and conditioning
LST EN 60212-2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials (IEC 60212:2010)

电子工业部, Double 85 test conditions

SJ/T 10293-1991 General technical conditions and test methods for sampling oscilloscopes

Japanese Industrial Standards Committee (JISC), Double 85 test conditions

JIS S 2073:2009 Standard use conditions, standard acceleration mode and test conditions for domestic direct vent type oil burning space heater
JIS A 8317-1:2010 Earth-moving machinery -- Determination of sound power level -- Dynamic test conditions
JIS S 2072:2009 Standard use conditions, standard acceleration mode and test conditions for domestic gas and oil water heater for bathtub

International Electrotechnical Commission (IEC), Double 85 test conditions

IEC 62052-31:2015 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
IEC 62670-1:2013 Concentrator photovoltaic (CPV) performance testing - Part 1: Standard conditions
IEC 60332:2023 Tests on electric and optical fibre cables under fire conditions - ALL PARTS
IEC 60332:2022 Tests on electric and optical fibre cables under fire conditions -？ ALL PARTS

API - American Petroleum Institute, Double 85 test conditions

API PUBL 2529-1975 Measuring@ Sampling@ testing and Base Conditions for Natural Gas Fluids (Third Edition)

PH-BPS, Double 85 test conditions

PNS ISO 6393:2021 Earth-moving machinery - Determination of sound power level - Stationary test conditions
PNS ISO 6395:2021 Earth-moving machinery - Determination of sound power level - Dynamic test conditions

BE-NBN, Double 85 test conditions

Professional Standard - Aerospace, Double 85 test conditions

QJ 1448-1988 雷达

GM Daewoo, Double 85 test conditions

GMKOREA EDS-T-7656-2011

Hebei Provincial Standard of the People's Republic of China, Double 85 test conditions

DB13/T 1829-2013 Environmental performance conditions and environmental test methods for solar greenhouses

Professional Standard - Agriculture, Double 85 test conditions

GB 5262-1985 General provisions on methods for determination of test conditions for agricultural machinery

Canadian General Standards Board （CGSB), Double 85 test conditions

CGSB 9.0 NO. 8-93-CAN/CGSB-1993 Methods of Testing Pulp and Paper Conditioning Paper or Paperboard for Testing in a Standard Atmosphere

Institute of Electrical and Electronics Engineers (IEEE), Double 85 test conditions

IEEE Std 1515-2000 IEEE Recommended Practice for Electronic Power Subsystems: Parameter Definitions, Test Conditions, and Test Methods

CU-NC, Double 85 test conditions

NC 34-47-1987 Agricultural Machinery and Elements. Forestry and Agricultural Machines. Methodology for the Determination of Testing Conditions
NC 34-48-1987 Agricultural Machinery and Elements. Foresty and Agricultural Machines. Energetic Evaluation. Methodology for its Impleraentation

European Telecommunications Standards Institute (ETSI), Double 85 test conditions

ETSI PRETS 300 019-B-1990 Equipment Engineering Environmental Conditions and Environmental Tests for Telecommunications Equipment Part B - Classification of Environmental Conditions (T/TR 02-12)

Professional Standard - Grain, Double 85 test conditions

LS/T 3704-2007 Technical requirements and test method for wheat hardness index tester