ZH
RU
ES

formula and molecular weight

formula and molecular weight, Total:500 items.

In the international standard classification, formula and molecular weight involves: Installations in buildings, Radiation measurements, Hydraulic energy engineering, Measurement of fluid flow, Measurement of volume, mass, density, viscosity, Telecommunication terminal equipment, Protection against electric shock, Electrical engineering in general, Farming and forestry, Radiation protection, Geology. Meteorology. Hydrology, Agricultural machines, implements and equipment, Raw materials for rubber and plastics, Aerospace electric equipment and systems, Analytical chemistry, Spices and condiments. Food additives, Nuclear energy engineering, Quality, Plastics, Non-ferrous metals, Electronic tubes, Crude petroleum, Laboratory medicine, Printed circuits and boards, Interface and interconnection equipment, Welding, brazing and soldering, Petroleum products in general, Fuels, Electricity. Magnetism. Electrical and magnetic measurements, External water conveyance systems, Medical equipment, Power transmission and distribution networks, Equipment for petroleum and natural gas industries, Quantities and units, Physics. Chemistry, Protection against dangerous goods, Edible oils and fats. Oilseeds, Rubber, Pharmaceutics, Waxes, bituminous materials and other petroleum products, Astronomy. Geodesy. Geography, Audio, video and audiovisual engineering, Materials for aerospace construction, Metalliferous minerals, Electronic display devices, Electromechanical components for electronic and telecommunications equipment, Applications of information technology, Information technology (IT) in general, Special purpose vehicles, Telecommunication systems, Machine tool systems, Fluid power systems, Insulation, Vocabularies, Environmental protection, Optics and optical measurements, Transformers. Reactors, Air quality, Internal combustion engines, Microprocessor systems, Rubber and plastics products, Products of the textile industry, Equipment for processing of minerals, Textile fibres, Reinforced plastics, Linear and angular measurements, Screw threads.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, formula and molecular weight

GB/T 31388-2015 Heat cost allocators with electrical energy supply
GB/T 29249-2012 Electronic weighing moisture analyzer of oven drying
GB/T 13161-2015 Radiation protection instrumentation.Measurement of personal dose equivalents H<下标p>(10) and H<下标p>(0.07) for X, gamma,neutron and beta radiations.Direct reading personal dose equivalent meters
GB/T 11828.1-2002 Instruments for stage measurement--Part 1: Float--type stage gauge
GB/T 14318-1993 Portable neutron ambient dose equivalent ratemeters for use in radiation protection
GB/T 4835.2-2013 Radiation protection instrumentation.Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation.Part 2:High range beta and photon dose and dose rate portable instruments for emergency radiation protection purp
GB/T 17282-1998 Method for estimation of molecular weight (relative molecular mass) of petroleum oils from viscosity measurements
GB/T 29787-2013 Radiation protection instrumentation.Mobile instrumentation for the measurement of photon and neutron radiation in the environment
GB 7908-1999 Classification of forest tree seed quality
GB/T 26422-2010 Classification of Azadirachta indica seed quality
GB/T 36214.4-2018 Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 4:High-temperature method
GB/T 13161-2003 Direct reading personal dose equivalent(rate)monitors for X and gamma radiation
GB/T 21864-2008 Standard test method for molecular weight averages and molecular weight distribution of polystyrene.High performance size-exclusion chromatography
GB 3102.8-1993 Quantities and units of physical chemistry and molecular physics
GB 6141-2008 Quality grading of legume seeds
GB/T 26615-2011 Quality grading of the princes-feather(Amaranthus hypochondriacus L.) seeds
GB/T 26614-2011 Quality grading of the Chinese ephedra(Ephedra L.) seeds
GB/T 36214.2-2018 Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 2:Universal calibration method
GB/T 42565-2023 Quantum computing—Terminology and definition
GB/T 26216.1-2010 DC current measuring device for HVDC transmission system.Part 1:Electronic DC current measuring device
GB/T 11465-1989 Temperature profile for electronic measuring instruments
GB 6142-2008 Quality grading of the grass seeds
GB/T 29554-2013 Ultra high molecular weight polyethylene fibre
GB 11465-1989 Thermal Profiles for Electronic Measuring Instruments

Professional Standard - Nuclear Industry, formula and molecular weight

EJ/T 901-1994 Direct-reading personal neutron dose equivalent and dose equivalent rate monitor
EJ/T 1011-1996 Fixed neutron dose equivalent rate meter, alarm device and monitor

Professional Standard - Agriculture, formula and molecular weight

JB/T 51220.1-1994 Compound and specific gravity seed cleaning machine product quality classification and other quality indicators
NY/T 372-2010 Technical specifications of quality evaluation for gravity seed separator
JB/T 51220.2-1994 Test method for product quality classification of compound and specific gravity seed cleaners
NY/T 365-2017 Seed indent cylinder separators.Technical specification of quality evaluation
GB 7908-1989 Forest tree seed quality classification
GB/T 10300.3-1988 Quality Management and Quality Assurance Quality System Quality Assurance Models for Production and Installation
NY/T 373-2011 Technical specification of quality evaluation for wind siene seed separating machine
GB/T 10300.4-1988 Quality Management and Quality Assurance Quality System Final Inspection and Test Quality Assurance Model

British Standards Institution (BSI), formula and molecular weight

BS 3680-8A:1989 Measurement of liquid flow in open channels - Measuring instruments and equipment - Current meters incorporating a rotating element
BS 3680-8C:1980 Measurement of liquid flow in open channels - Measuring instruments and equipment - Calibration of rotating-element current-meters in straight open tanks
BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
BS 3727-14:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of tungsten (gravimetric method)
BS EN 61526:2007 Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters and monitors
BS 3727-1:1966 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of aluminium (photometric method)
BS 3727-2:1968 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of boron (photometric method)
BS 3727-4:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of chromium (photometric method)
BS 3727-5:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of cobalt (photometric method)
BS 3727-6:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of copper (photometric method)
BS 3727-7:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of iron (photometric method)
BS 3727-8:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of manganese (photometric method)
BS 3727-9:1967 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (photometric method)
BS 3727-13:1965 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of titanium (photometric method)
BS 3727-15:1968 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of zinc (photometric method)
BS ISO 16014-2:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Universal calibration method
BS ISO 80000-9:2009 Quantities and units - Physical chemistry and molecular physics
BS ISO 31-8:1992 Quantities and units - Physical chemistry and molecular physics
PD IEC TR 62899-402-4:2021 Printed electronics. Printability. Measurement of qualities. Classification and measurement methods for morphology
BS ISO 16014-4:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
BS EN 62363:2011 Radiation protection instrumentation. Portable photon contamination meters and monitors
BS PD IEC TR 62899-402-4:2021 Printed electronics. Printability. Measurement of qualities. Classification and measurement methods for morphology
BS EN 61526:2013 Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters
BS ISO 16014-1:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. General principles
BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
BS 3727-10:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.020-0.25 per cent (photometric method)
BS 3727-11:1965 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.001-0.020 per cent (photometric method)
BS EN ISO 80000-9:2013+A1:2011 Quantities and units. Physical chemistry and molecular physics
BS EN ISO 80000-9+A1:2009 Quantities and units. Physical chemistry and molecular physics
BS ISO 80000-9:2009+A1:2011 Quantities and units. Physical chemistry and molecular physics
BS EN ISO 80000-9:2019 Quantities and units - Physical chemistry and molecular physics
BS QC 960100:1992 Harmonized system of quality assessment for electronic components - Electromechanical switches for use in electronic equipment - Sectional specification for rotary switches
21/30396799 DC BS ISO 24166-3. Snap-on bottles for metering pumps. Part 3. Plastic
BS IEC 60846-2:2015 Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation. High range beta and photon dose and dose rate portable instruments for emergency radiation protection purposes
BS EN 50193:1997 Closed electrical instantaneous water heaters - Methods for measuring performance
BS QC 960200:1992 Harmonized system of quality assessment for electronic components - Electromechanical switches for use in electronic equipment - Sectional specification for lever (toggle) switches
BS ISO 16014-4:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. High-temperature method
BS ISO 16014-3:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Low-temperature method
BS ISO 15568:1998 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
BS ISO 15568:1999 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations

Professional Standard - Water Conservancy, formula and molecular weight

SL/T 148.2-1995 Grading of products quality for float-type stage gauge
SL/T 148.6-1995 Grading of products quality for tipping bucket rainfall recorder
SL/T 148.7-1995 Grading of products quality for siphon rainfall recorder

Korean Agency for Technology and Standards (KATS), formula and molecular weight

KS B ISO 2537:2014 Liquid flow measurement in open channels-Rotating element current-meters
KS B ISO 2537:2004 Liquid flow measurement in open channels-Rotating element current-meters
KS B 50032-2005(2020) Gas volume meters－Part 3：Rotary pistongas meters and turbine gas meters
KS C IEC 61323:2005 Radiation protection instrumentation-Neutron radiations-Direct reading personal dose equivalent and/or dose equivalent rate monitors
KS C IEC 61323-2005(2015) Radiation protection instrumentation－Neutron radiations－Direct reading personal dose equivalent and/or dose equivalent rate monitors
KS A IEC 61525:2003 Radiation protection instrumentation-X, gamma, high energy beta and neutron radiations-Direct reading personal dose equivalent and/or dose equivalent rate monitors
KS C IEC 61526-2012(2017) Radiation protection instrumentation－Measurement of personal dose equivalents Hp(10) and Hp(0.07) for X, gamma, neutron and beta radiations－Direct reading personal dose equivalent meters
KS A IEC 61525:2016 Radiation protection instrumentation－X, gamma, high energy beta and neutron radiations－Direct reading personal dose equivalent and/or dose equivalent rate monitors
KS B ISO 8655-2:2006 Piston-operated volumetric apparatus－Part 2：Piston pipettes
KS A 4610-2006(2021) Portable photon ambient dose equivalent ratemeters for radiation protection
KS M ISO 16564:2007 Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS C IEC 61526:2012 Radiation protection instrumentation-Measurement of personal dose equivalents Hp(10) and Hp(0.07) for X, gamma, neutron and beta radiations-Direct reading personal dose equivalent meters
KS B ISO 8655-3:2006 Piston-operated volumetric apparatus-Part 3:Piston burettes
KS B ISO 8655-3:2017 Piston-operated volumetric apparatus－Part 3：Piston burettes
KS A ISO 21909-1:2017 Passive personal neutron dosemeters－Performance and test requirements
KS C IEC 60151-0-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 0：Precautions relating to methods of measurement of electronic tubes and valves
KS M ISO 16564-2007(2022) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 16564-2007(2017) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS A IEC 61018-2012(2017) High range beta and photon dose and dose rate portable instruments for emergency radiation protection purposes
KS A IEC 61018-2012(2022) High range beta and photon dose and dose rate portable instruments for emergency radiation protection purposes
KS C IEC 60151-1-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 1：Measurement of electrode current
KS C IEC 62053-31-2003(2018)
KS P ISO 5834-2-2012(2017) Implants for surgery－Ultra-high molecular weight polyethylene－Part 2：Moulded forms
KS P ISO 5834-1:2018 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form
KS A ISO 31-9-2001(2011) Quantities and units－Part 9：Atomic and nuclear physics
KS C IEC 61322:2012 Radiation protection instrumentation－Installed dose equivalent rate meters, warning assemblies and monitors for neutron radiation of energy from thermal to 15 MeV
KS B 50031-2005(2020) Gas volume meters－Part 2：Diaphragm type gas meter
KS C IEC 60151-4-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 4：Methods of measuring noise factor
KS C IEC 60151-3-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 3：Measurement of equivalent input and output admittances
KS A ISO 31-8-2001(2011) Quantities and units－Part 8：Physical chemistry and molecular physics
KS B ISO 8655-5:2006 Piston-operated volumetric apparatus-Part 5:Dispensers
KS B ISO 8655-5:2017 Piston-operated volumetric apparatus－Part 5：Dispensers
KS B ISO 8655-6:2006 Piston-operated volumetric apparatus－Part 6：Gravimetric methods for the determination of measurement error
KS E ISO 5997-2001(2016) Chromium ores and concentrates ― Determination of silicon content ― Molecular absorption spectrometric method and gravimetric method
KS C IEC 60151-16-2003(2008) Measurements of the electrical properties of electronic tubes and valves－Part 16：Methods of measurement for television picture tubes
KS C IEC 60151-2-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 2：Measurement of heater or filament current
KS E ISO 5997:2001 Chromium ores and concentrates－Determination of silicon content－Molecular absorption spectrometric method and gravimetric method
KS E ISO 5997-2001(2021) Chromium ores and concentrates ― Determination of silicon content ― Molecular absorption spectrometric method and gravimetric method
KS A ISO 80000-10:2020 Quantities and units — Part 10: Atomic and nuclear physics
KS A ISO 80000-10:2015 Quantities and units－Part 10：Atomic and nuclear physics
KS B ISO 9825:2003 Measurement of liquid flow in open channels-Field measurement of discharge in large rivers and floods
KS A IEC 61005:2003 Portable neutron ambient dose equivalent ratemeters for use in radiation protection
KS A IEC 61005:2014 Radiation protection instrumentation — Neutron ambient dose equivalent(rate) meters
KS B 6510-1991 Test Methods for Electro-hydraulic Proportional Series Flow Control Valves
KS X 6023-2007 Interactive Electronic Technical Manual(IETM):Quality assurance program
KS X 6023-2013 Interactive Electronic Technical Manual(IETM)：Quality assurance program
KS X 6023-2007(2012) Interactive Electronic Technical Manual(IETM)：Quality assurance program
KS B ISO 3455:2014 Liquid flow measurement in open channels-Calibration of rotating-element current-meters in straight open tanks
KS B ISO 3455:2004 Liquid flow measurement in open channels-Calibration of rotating-element current-meters in straight open tanks
KS A ISO 31-8:2012 Quantities and units－Part 8：Physical chemistry and molecular physics
KS A ISO 80000-9:2020 Quantities and units — Part 9: Physical chemistry and molecular physics
KS R ISO 8178-2:2007 Reciprocating internal combustion engines－Exhaust emission measurement－Part 2：Measurement of gaseous and particulate exhaust emissions at site
KS C IEC 60512-3:2002 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 3:Current-carrying capacity tests
KS C IEC/TR 62725-2017(2022) Analysis of quantification methodologies of greenhouse gas emissions for electrical and electronic products and systems
KS C IEC 60512-3:2014 Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 3：Current－carrying capacity tests

CZ-CSN, formula and molecular weight

CSN ISO 2537:1993 Liquid flow measurement in open channels. Rotating element current-meters
CSN ISO 3455:1994 Liquid flow measurement in open channels. Calibration of rotating-element current meters in straight open tanks

Standard Association of Australia （SAA）, formula and molecular weight

AS 3778.6.1:1992 Measurement of water flow in open channels - Measuring devices, instruments and equipment - Rotating element current-meters
AS 3778.6.3:1992 Measurement of water flow in open channels - Measuring devices, instruments and equipment - Calibration of rotating element current-meters in straight open tanks
AS 2292.2:1987 Methods for the analysis of solders - Determination of silver, bismuth, cadmium, copper, antimony, iron and zinc - Flame atomic absorption spectrometric method
AS 62054.11:2006 Electricity metering (ac) - Tariff and load control - Particular requirements for electronic ripple control receivers
AS ISO 22048:2006 Surface chemical analysis - Information format for static secondary-ion mass spectrometry

YU-JUS, formula and molecular weight

JUS N.A0.391-1987 Detection and measurement of ionizing radiation by electric means. Terms and definitions.
JUS C.A1.545-1990 Eardmetals. Chemical analysis by flame atomic absorption spectrometr?. Determl-nation of cobalt, ircm, manganese, molybdenum, nickel, titanium and vanadium ±n contents from 0,5 to 2 %(m/m)

Professional Standard - Post and Telecommunication, formula and molecular weight

YD/T 678-1994 Quality grading criteria of electronic teleprinters

IN-BIS, formula and molecular weight

Association Francaise de Normalisation, formula and molecular weight

NF C42-600*NF EN 60359:2003 Electrical and electronic measurement equipment - Expression of performance
NF C19-105*NF EN 61526:2013 Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters
FD CEN/TR 17236:2020 Cigarettes électroniques et e-liquides - Composants dont la teneur est à mesurer dans l'aérosol des produits de vapotage
NF S94-060-2*NF ISO 5834-2:2019 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2 : moulded forms
NF C19-107*NF EN 62363:2011 Radiation protection instrumentation - Portable photon contamination meters and monitors.
NF EN 13366:2001 Engrais - Traitement avec une résine échangeuse d'ions cationique pour la détermination de la teneur en oligo-éléments chélatés et de la fraction chélatée des oligo-éléments
NF X02-300-10*NF EN ISO 80000-10:2019 Quantities and units - Part 10 : atomic and nuclear physics
NF EN ISO 80000-10:2019 Grandeurs et unités - Partie 10 : physique atomique et nucléaire
NF B35-655-3*NF EN ISO 8655-3:2003 Piston-operated volumetric apparatus - Part 3 : piston burettes
NF X02-300-9:2013 Quantities and units - Part 9: physical chemistry and molecular physics
NF X02-208:1994 Quantities and units. Part 8 : physical chemistry and molecular physics.
NF EN 61947-2:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 2 : projecteurs à résolution variable
NF EN ISO 16014-5:2019 Plastiques - Détermination de la masse moléculaire moyenne et de la distribution des masses moléculaires de polymères par chromatographie d'exclusion stérique - Partie 5 : méthode par diffusion lumineuse
NF M60-404:1998 Determination of plutonium content in plutonium dioxide (PuO2) of nuclear grade quality. Gravimetric method.
NF X02-300-9*NF EN ISO 80000-9:2019 Quantities and units - Part 9 : physical chemistry and molecular physics
NF EN ISO 80000-9:2019 Grandeurs et unités - Partie 9 : chimie physique et physique moléculaire
NF C19-102-2*NF EN 60846-2:2018 Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 2: High range beta and photon dose and dose rate portable instruments for emergency radiation protection
NF X02-300-10:2013 Quantities and units - Part 10: atomic and nuclear physics
NF EN ISO 665:2020 Graines oléagineuses - Détermination de la teneur en eau et en matières volatiles
NF EN ISO 2871-1:2010 Agents de surface - Détergents - Détermination de la teneur en matière active cationique - Partie 1 : matière active cationique à haute masse moléculaire
FD CEN/TR 16269:2011 Air ambiant - Guide pour le mesurage des anions et des cations dans la fraction PM2,5
NF EN 61988-2-1:2012 Panneaux d'affichage à plasma - Partie 2-1 : méthodes de mesure - Mesures optiques et opto-électriques

Professional Standard - Machinery, formula and molecular weight

JB/T 53251-1999 Product quality classification of rotor type heavy oil pump for oil field
JB/T 53538-1999 Product quality classification of double rotor impact crusher
JB/T 53537-1999 Product quality classification of single rotor impact crusher
JB/T 11536.1-2013 Electronic Weighing Hopper Part 1: Types and Basic Parameters
JB/T 50047-1999 Measuring tools, measuring instruments, product quality grading, electronic plug gauges
JB/T 54265-1999 Measuring tools and measuring instruments Product quality grading buoy pneumatic measuring instruments
JB/T 54283-1999 Measuring tools Measuring instruments Product quality grading Electronic digital calipers
JB/T 50032-1999 Product quality classification of plate-fin oil cooler cores for internal combustion engines
JB/T 54289-1999 Measuring tools, measuring instruments, product quality grading, electronic digital display height calipers
JB/T 54288-1999 Measuring tools, measuring instruments, product quality grading, electronic digital display depth calipers
JB/T 50092-1997 Product quality classification of agricultural wheeled and tracked tractors
JB/T 50148-2000 Measuring tools, measuring instruments, product quality grading, steel ball inner diameter percentage indicator (internal use)
JB/T 50146-2000 Measuring tools, measuring instruments, product quality grading, spring-type inner diameter dial indicator (internal use)
JB/T 9678-1999 External quality of cap and pin type plass insulator body
JB/T 51197-1999 Product quality classification of conventional plow

International Electrotechnical Commission (IEC), formula and molecular weight

IEC 61323:1995 Radiation protection instrumentation - Neutron radiation - Direct reading personal dose equivalent and/or dose equivalent rate monitors
IEC 61018:1991 High range beta and photon dose and dose rate portable instruments for emergency radiation protection purposes
IEC 61526:2010 Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters
IEC 61526:2005 Radiation protection instrumentation - Measurement of personal dose equivalents H<(Index)p>(10) and H<(Index)p>(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters and monitors
IEC TR 62899-402-4:2021 Printed electronics - Part 402-4: Printability - Measurement of qualities - Classification and measurement methods for morphology
IEC 61037:1998 Electricity metering - Tariff and load control - Particular requirements for electronic ripple control receivers
IEC 62363:2008 Radiation protection instrumentation - Portable photon contamination meters and monitors
IEC 62623:2022 RLV Desktop and notebook computers - Measurement of energy consumption
IEC 62623:2022 Desktop and notebook computers - Measurement of energy consumption
IEC 60151-5:1964 Measurements of the electrical properties of electronic tubes. Part 5 : Methods of measuring hiss and hum

German Institute for Standardization, formula and molecular weight

DIN 6800-1:1980 Procedures in dosimetry; principles of photon and electron dosimetry with probe-type detectors
DIN 6130:1980-12 Means of packaging; bottles and hollow bodies made of plastics, general tolerances for weight and brimful volume
DIN 6801-1:2019-09 Procedures of dosimetry with probe-type detectors for proton and ion radiation - Part 1: Ionization chambers
DIN 6809-1:2010-03 Clinical dosimetry - Part 1: Radiation quality of photon and electron radiation
DIN 6800-2:1997 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 2: Ionisation dosimetry
DIN 25456-1:1999 Neutron fluence measurement - Part 1: Fast-neutron fluence determination with activation and fission detectors
DIN 6809-1:2010 Clinical dosimetry - Part 1: Radiation quality of photon and electron radiation
DIN 6800-2 Berichtigung 1:2010 Procedures of dosimetry with probe type detectors for photon and electron radiation - Part 2: Ionization chamber dosimetry of high energy photon and electron radiation, Corrigendum to DIN 6800-2:2008-03
DIN 6800-2:2008 Procedures of dosimetry with probe type detectors for photon and electron radiation - Part 2: Ionization chamber dosimetry of high energy photon and electron radiation
DIN ISO 5834-2:2020-07 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms (ISO 5834-2:2019)
DIN ISO 5834-1:2020-07 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form (ISO 5834-1:2019)
DIN 25456-4:1999 Neutron fluence measurement - Part 4: Fast-neutron fluence determination with niob activation detectors
DIN 25456-2:1999 Neutron fluence measurement - Part 2: Fast-neutron fluence determination with iron activation detectors
DIN 25456-6:1999 Neutron fluence measurement - Part 6: Fast-neutron fluence determination with thorium fission detectors
DIN 25456-5:1999 Neutron fluence measurement - Part 5: Fast-neutron fluence determination with copper activation detectors
DIN 25456-3:1999 Neutron fluence measurement - Part 3: Fast-neutron fluence determination with nickel activation detectors
DIN 25456-1:1999-10 Neutron fluence measurement - Part 1: Fast-neutron fluence determination with activation and fission detectors
DIN 6802-3:2007 Neutron dosimetry - Part 3: Methods for neutron measurement in radiation protection
DIN EN ISO 80000-10:2020-02 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019); German version EN ISO 80000-10:2019
DIN 6800-2:2020-08 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 2: Ionization chamber dosimetry of high energy photon and electron radiation
DIN 25456-4:1999-10 Neutron fluence measurement - Part 4: Fast-neutron fluence determination with niob activation detectors
DIN 25456-2:1999-10 Neutron fluence measurement - Part 2: Fast-neutron fluence determination with iron activation detectors
DIN 25456-6:1999-10 Neutron fluence measurement - Part 6: Fast-neutron fluence determination with thorium fission detectors
DIN 25456-5:1999-10 Neutron fluence measurement - Part 5: Fast-neutron fluence determination with copper activation detectors
DIN 25456-3:1999-10 Neutron fluence measurement - Part 3: Fast-neutron fluence determination with nickel activation detectors
DIN 6802-3:2007-06 Neutron dosimetry - Part 3: Methods for neutron measurement in radiation protection
DIN EN ISO 16014-5:2019-09 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019); German version EN ISO 16014-5:2019
DIN 6800-4:2000-12 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 4: Film dosimetry
DIN EN ISO 80000-9:2020-02 Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2019); German version EN ISO 80000-9:2019
DIN 2276-2:1986 Inclination measuring systems; electronic inclination measuring systems; types and requirements
DIN 6802-3:1988 Neutron dosimetry; methods and devices for neutron measurement in radiation protection; ratings

Professional Standard - Commodity Inspection, formula and molecular weight

SN/T 3002-2011 Determication of relative molecular weight and molecular weight distribution of polyethylene.Gel permeation chromatography method
SN/T 4183-2015 Determination of relative molecular weight and molecular weight distribution of polyolefins.High temperature gel permeation chromatography method

ANS - American Nuclear Society, formula and molecular weight

6.1.1-1991 Neutron and Gamma-Ray Fluence-to-Dose Factors
6.1.1-1977 NEUTRON AND GAMMA-RAY FLUX-TO-DOSE-RATE FACTORS (WITHDRAWN)

Chongqing Provincial Standard of the People's Republic of China, formula and molecular weight

DB50/T 1328-2022 Gardenia seed quality grading
DB50/T 205-2005 Classification of forest tree seed quality
DB50/T 602-2015 Coptis chinensis seed quality grading
DB50/T 596-2015 Quality Grading of Scrophulariae Scrophulariae Buds
DB50/T 655-2015 Artemisia annua seed quality grading
DB50/T 1224-2022 Salvia seed quality grading
DB50/T 1232-2022 Platycodon grandiflorum seed quality grading
DB50/T 1326-2022 Quality Grading of Woody Seeds
DB50/T 644-2015 Quality Grading of Asparagus Seeds
DB50/T 645-2015 Seed quality classification of Taibai Fritillaria

国家市场监督管理总局、中国国家标准化管理委员会, formula and molecular weight

GB/T 11828.1-2019 Instruments for stage measurement—Part 1:Float-type stage gauge
GB/T 36214.1-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles
GB/T 36214.3-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method
GB/T 36214.5-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection
GB/T 26216.1-2019 DC current measuring device for HVDC transmission system—Part 1：Electronic DC current measuring device

Japanese Industrial Standards Committee (JISC), formula and molecular weight

JIS Z 4333:1990 Portable photon ambient dose equivalent ratemeters for radiation protection
JIS Z 4333:2006 Portable photon ambient dose equivalent rate meters for use in radiation protection
JIS Z 4333 AMD 1:2001 Portable photon ambient dose equivalent ratemeters for radiation protection (Amendment 1)
JIS Z 8000-10:2022 Quantities and units -- Part 10: Atomic and nuclear physics
JIS Z 4312:2002 Direct reading personal dose equivalent (rate) meters and monitors for X, gamma, beta and neutron radiations
JIS Z 4312:2013 Direct reading personal dose equivalent meters for X, gamma, beta and neutron radiations
JIS K 7252-1:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
JIS K 7252-3:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
JIS K 7252-4:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
JIS K 7252-3:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
JIS K 7252-4:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
JIS K 7252-1:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
JIS Z 8000-9:2022 Quantities and units -- Part 9: Physical chemistry and molecular physics
JIS Z 8000-9:2015 Quantities and units -- Part 9: Physical chemistry and molecular physics
JIS Z 8202-8:2000 Quantities and units -- Part 8: Physical chemistry and molecular physics
JIS K 7252-2:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
JIS K 7252-2:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method

National Metrological Technical Specifications of the People's Republic of China, formula and molecular weight

JJF 1589-2016 Program of Pattern Evaluation of Float Meters

Gansu Provincial Standard of the People's Republic of China, formula and molecular weight

DB62/T 307-2023 Operation quality of compound seed cleaning machine

RO-ASRO, formula and molecular weight

STAS 10059-1975 ELECTRONICMEASURING INSTRUMENTS Determination and mode of expression of errors
STAS 2849/6-1986 l.ighling RADIANT, UMINOIS AND PHOTON QfANTITIES Tenniiiology
SR ISO 31-9:1995 Quantities and units - Part 9: Atomic and nuclear physics
STAS SR CEI 1018-1995 High range beta and photon dose and dose rate portable instruments for emerpency radiation protection purposes
SR ISO 31-8:1995 Quantities and units - Part 8: Physical chemistry and molecular physics
SR ISO 31-8/C1:1996 Quantities and units - Part 8: Physical chemistry and molecular physics
STAS 4640/1-1971 INDICATING ELECTRICAL MEA- SURING INSTRUMENTS AND THEIR ACCESSORIES Definitions and classification
STAS SR 6124-1-1999 Agricultural seeds Determination of moisture

United States Navy, formula and molecular weight

NAVY QPL-16034-61-2007 METERS, ELECTRICAL-INDICATING (SWITCHBOARD AND PORTABLE TYPES)

European Committee for Standardization (CEN), formula and molecular weight

EN ISO 8655-2:2022 Piston-operated volumetric apparatus - Part 2: Pipettes (ISO 8655-2:2022)
EN ISO 8655-2:2002 Piston-operated volumetric apparatus Part 2: Piston pipettes
EN ISO 8655-3:2022 Piston-operated volumetric apparatus - Part 3: Burettes (ISO 8655-3:2022)
EN ISO 8655-3:2002 Piston-operated volumetric apparatus - Part 3: Piston burettes
EN ISO 659:2009 Oilseeds - Determination of oil content (Reference method) (ISO 659:2009)
EN ISO 80000-10:2019 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019)
EN ISO 80000-10:2013 Quantities and units - Part 10: Atomic and nuclear physics
EN ISO 8655-5:2022 Piston-operated volumetric apparatus - Part 5: Dispensers (ISO 8655-5:2022)
EN ISO 8655-5:2002 Piston-operated volumetric apparatus - Part 5: Dispensers
EN ISO 80000-9:2019 Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2019)
EN ISO 80000-9:2013 Quantities and units - Part 9: Physical chemistry and molecular physics
EN ISO 665:1995 Oilseeds - Determination of Moisture and Volatile Matter Content (ISO 665 : 1977)
EN ISO 665:2020 Oilseeds - Determination of moisture and volatile matter content (ISO 665:2020)
EN 29002:1987 Quality Systems: Model for Quality Assurance in Production and Installation
EN 29003:1987 Quality Systems Part 3 Specification for Final Inspection and Test
EN 29002:1990 Quality systems; model for quality assurance in production and installation
EN 29003:1990 Quality systems; model for quality assurance in final inspection and test

International Organization for Standardization (ISO), formula and molecular weight

ISO 8655-2:2002 Piston-operated volumetric apparatus - Part 2: Piston pipettes
ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
ISO 2537:1974 Title missing - Legacy paper document
ISO 2537:1985 Liquid flow measurement in open channels — Cup-type and propeller-type current-meters
ISO 2537:1988 Liquid flow measurement in open channels; rotating element current-meters
ISO 8655-3:2002 Piston-operated volumetric apparatus - Part 3: Piston burettes
ISO 5834-1:2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form
ISO 31-8:1973 Title missing - Legacy paper document
ISO 31-8:1980 Quantities and units of physical chemistry and molecular physics
ISO 16014-4:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
ISO 16014-4:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
ISO 16014-1:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles
ISO 16564:2004/Amd 1:2006 Rubber, raw natural — Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) — Amendment 1
ISO 80000-10:2009 Quantities and units - Part 10: Atomic and nuclear physics
ISO 8655-5:2002 Piston-operated volumetric apparatus - Part 5: Dispensers
ISO 8655-6:2002 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error
ISO 16014-2:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
ISO 16014-4:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
ISO 16014-3:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
ISO 16014-2:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
ISO 21909-2:2021 Passive neutron dosimetry systems — Part 2: Methodology and criteria for the qualification of personal dosimetry systems in workplaces
ISO 16014-1:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 1: General principles
ISO 16014-5:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 5: Light-scattering method
ISO 80000-9:2009 Quantities and units - Part 9: Physical chemistry and molecular physics
ISO 31-8:1992 Quantities and units; part 8: physical chemistry and molecular physics
ISO 5997:1984 Chromium ores and concentrates; Determination of silicon content; Molecular absorption spectrometric method and gravimetric method
ISO 31-10:1992 Quantities and units; part 10: nuclear reactions and ionizing radiations
ISO 80000-10:2019 Quantities and units — Part 10: Atomic and nuclear physics
ISO/ASTM 51631:2020 Practice for use of calorimetric dosimetry systems for dose measurements and dosimetry system calibration in electron beams
ISO 16014-3:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 16014-3:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 2537:1985/Amd 1:1983 Liquid flow measurement in open channels — Cup-type and propeller-type current-meters — Amendment 1
ISO 15568:1998 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
ISO 8655-6:2022 Piston-operated volumetric apparatus — Part 6: Gravimetric reference measurement procedure for the determination of volume
ISO 80000-9:2019 Quantities and units — Part 9: Physical chemistry and molecular physics
ISO 16014-1:2003 Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
ISO 16014-2:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method

RU-GOST R, formula and molecular weight

GOST R 54352-2011 Food common salt. Determination of a mass fraction of magnesium-ion and calcium-ion by complexonometric method
GOST 4.158-1985 System of product-quality indices. Volumetric, velocity counters, batchmeters and flowmeters. Electromagnetic flowmeters. Vortex flowmeters, batchmeters and metering plants. Nomenclature of indices
GOST R ISO 5834-1-2015 Implants for surgery. Ultrahigh-molecular-weight polyethylene. Part 1. Powder form
GOST R 25645.159-1994 Sporadic electron fluxes in near-earth space. Model of spatial-time and energy distribution
GOST 25645.139-1986 Natural radiation belts of Earth. Model of spatial and energy distribution of electron flux
GOST 33418-2015 Testing of chemicals of environmental hazard. Determination of the Number-Average Molecular Weight and the Molecular Weight Distribution of Polymers using Gel Permeation Chromatography
GOST 8.070-1996 State system for ensuring unisormity of measurements. State verification schedule for means measuring absorbed and equivalent dases and rate of absorbed and equivalent doses of photon and electron radiations
GOST 8.070-1983 State system for ensuring the uniformity measurements. State primary standard of unit of absorbed dose rate of photon ionizing radiation

HU-MSZT, formula and molecular weight

American Society for Testing and Materials (ASTM), formula and molecular weight

ASTM E261-98 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
ASTM D4001-93(2006) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D4001-13 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D2502-04(2009) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2502-92(1996) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2502-12 adjunct(2020) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2502-04 Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D6579-00 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
ASTM D2502-92(2002) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2503-92(2002)e1 Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(2007) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(2012) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D6579-11(2020) Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
ASTM F648-10 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM F648-21 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM D6474-99 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-99(2006) Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-12 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM UOP434-83 Free Water and Volatile Hydrocarbon Content of Molecular Sieves
ASTM D5675-13 Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
ASTM D6579-06 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
ASTM D6579-11 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
ASTM UOP375-86 Calculation of UOP Characterization Factor and Estimation of Molecular Weight of Petroleum Oils
ASTM ISO/ASTM51631-03 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
ASTM ISO/ASTM51631-13 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
ASTM D5296-05 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D2503-82(1987)e1 Standard Test Method for Molecular Weight (Relative Molecular Mass) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM E261-03 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
ASTM D2503-92(1997) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(2016) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D5296-11 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM E261-15 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
ASTM D5675-13(2018) Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
ASTM D5675-13(2023) Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders

U.S. Air Force, formula and molecular weight

AIR FORCE MIL-I-38338 D VALID NOTICE 2-2008 Indicator, Oil Quantity, Continuous Transmission, Nucleonic

KR-KS, formula and molecular weight

KS A ISO 21909-1-2017 Passive personal neutron dosemeters－Performance and test requirements
KS P ISO 5834-1-2018 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form
KS A ISO 80000-10-2020 Quantities and units — Part 10: Atomic and nuclear physics
KS A ISO 80000-9-2020 Quantities and units — Part 9: Physical chemistry and molecular physics

API - American Petroleum Institute, formula and molecular weight

API MPMS 21.2-1998 Manual of Petroleum Measurement Standards Chapter 21-Flow Measurement Using Electronic Metering Systems - Section 2-Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters (First Edition)

国家药监局, formula and molecular weight

YY/T 1795-2021 sperm quality analyzer
YY/T 1678-2019 Method for detecting molecular weight and molecular weight distribution of polylactic acid and its copolymers for surgical implants

Professional Standard - Petrochemical Industry, formula and molecular weight

SH/T 0108-1992 Determination of average molecular weight and molecular weight distribution of certain polymeric additives (Size Exclusion Chromatography)
SH/T 0730-2004 Estimation of molecular weigh (relative molecular mass) of petroleum oils from viscosity measurements
SH/T 0398-2007 Standard test method for molecular weight of petrolemn wax and petrolatum
SH/T 0398-1992 Petroleum Wax and Petroleum Fat Molecular Weight Determination

未注明发布机构, formula and molecular weight

BS ISO 16564:2004(2006) Rubber, raw natural — Determination of averagemolecularmass and molecular - mass distribution by size exclusion chromatography (SEC)
BS ISO 15568:1998(2000) Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations

SE-SIS, formula and molecular weight

SIS SS-IEC 1018:1992 Nuclear instrumentation - High range beta andphoton dose and dose r?te portable instruments for emergency radiation protection purposes
SIS SS IEC 485:1981 Electronic measuring equipment — Digital electronic d.c. voltmeters and d.c. electronic analogue-to-digital converters
SIS SS-IEC 1005:1991 Nuclear instrumentation — Portable neutron ambient dose equivalent ratemeters for use in radiation protection
SIS SS 01 61 78-1978 Quantities and units. Atomic and nuclear physics

International Telecommunication Union (ITU), formula and molecular weight

ITU-T G.671 NOTE-2006 Transmission characteristics of optical components and subsystems
ITU-T G.671-2005 Transmission characteristics of optical components and subsystems SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Transmission media characteristics ?Characteristics of optical components and subsystems Study Group 15
ITU-T Y.3806-2021 Quantum key distribution networks - Requirements for quality of service assurance
ITU-T G.671 AMD 2-2006 Transmission characteristics of optical components and subsystems Amendment 2
ITU-T G.671 AMD 1-2006 Transmission characteristics of optical components and subsystems Amendment 1

Yunnan Provincial Standard of the People's Republic of China, formula and molecular weight

DB53/T 902-2019 Quality classification of Polygonatum yunnanensis seeds and seedlings

Indonesia Standards, formula and molecular weight

SNI 8066-2015 Tata cara pengukuran debit aliran sungai dan saluran terbuka menggunakan alat ukur arus dan pelampung
SNI 19-4177-1996 Specification of sieves for size measurement of grains

American National Standards Institute （ANSI), formula and molecular weight

ANSI/ASTM D6474:1999 Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ANSI/IESNA LM-63-2002 File Format for the Electronic Transfer of Photometric Data and Related Information
ANSI/ASTM D5296:1997 Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography, Test Method of (08.03)

Group Standards of the People's Republic of China, formula and molecular weight

T/CAS ES370112008-2022 Rules for quality grading and evaluating of industrial products—Electronic downhole pressure gauge
T/AGIA 001-2021 Standard for seed quality grading of American ginseng
T/SAIA 002-2021 Standard for seed quality grading of Bupleurum chinense
T/CSTM 00197-2021 Graphene quantum dots — Determination of relative fluorescence quantum efficiency for the blue emission — Molecular fluorescence spectroscopy

TH-TISI, formula and molecular weight

TIS 235.10-2013 Quantities and units.part 10: atomic and nuclear physics
TIS 2250.3-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 3: low.temperature method
TIS 2250.4-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 4: high.temperature method
TIS 2250.1-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 1: general principles
TIS 235.9-2013 Quantities and units.part 9: physical chemistry and molecular physics
TIS 2250.2-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 2: universal calibration method

ETSI - European Telecommunications Standards Institute, formula and molecular weight

GS QKD 014-2019 Quantum Key Distribution (QKD); Protocol and data format of REST-based key delivery API (V1.1.1)
GS QKD 002-2010 Quantum Key Distribution; Use Cases (V1.1.1)
GR QKD 003-2018 Quantum Key Distribution (QKD); Components and Internal Interfaces (V2.1.1)
GS QKD 003-2010 Quantum Key Distribution (QKD); Components and Internal Interfaces (V1.1.1)
GR QKD 007-2018 Quantum Key Distribution (QKD); Vocabulary (V1.1.1)

NL-NEN, formula and molecular weight

NEN 1211-1971 Quantities, SI units and their symbols Atomic and molecular phenomena
NEN 1226-1981 Quantities, SI units and their symbols Atomic and molecular phenomena

Universal Oil Products Company (UOP), formula and molecular weight

UOP 375-2007 CALCULATION OF UOP CHARACTERIZATION FACTOR AND ESTIMATION OF MOLECULAR WEIGHT OF PETROLEUM OILS

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, formula and molecular weight

JEDEC JEP123-1995 Guideline for Measurement of Electronic Package Inductance and Capacitance Model Parameters

PL-PKN, formula and molecular weight

PN E06520-1990 Measuring transducers of electrical quantities Requirements and tests

Professional Standard - Chemical Industry, formula and molecular weight

HG/T 4787-2014 Middle molecular polyisobutylene

Society of Automotive Engineers (SAE), formula and molecular weight

SAE AMS3728-2011 EPOXY CRESOL NOVOLAC RESIN Low Molecular Weight

Inner Mongolia Provincial Standard of the People's Republic of China, formula and molecular weight

DB15/T 1655-2019 Radix Paeoniae Rubra Seed Quality Grading
DB15/T 1297-2017 Platycodon grandiflorum seed quality grading
DB15/T 1299-2017 Seabuckthorn Seed Quality Grading
DB15/T 2181-2021 Isatis indica seed quality grading
DB15/T 2175-2021 Scutellaria baicalensis seed quality grading
DB15/T 2180-2021 Scopolamine seed quality grading
DB15/T 2204-2021 Parsnips Seed Quality Grading
DB15/T 2648-2022 Sophora flavescens seed quality classification
DB15/T 2650-2022 Perilla seed quality grading
DB15/T 1658-2019 Cistanche seed quality classification
DB15/T 1296-2017 Seed quality classification of Bupleurum chinensis
DB15/T 2173-2021 Atractylodes atractylodes seed quality classification
DB15/T 2179-2021 Bluethorn Seed Quality Grading
DB15/T 1656-2019 Seed quality classification of Adenophora japonicus
DB1501/T 0027-2022 Grading of Allium Seed Quality
DB15/T 2652-2022 Elecampane seed quality grading
DB15/T 1298-2017 Seed Quality Grading of Astragalus mongolica

Qinghai Provincial Standard of the People's Republic of China, formula and molecular weight

DB63/T 1061-2012 Laywort seed quality grading
DB63/T 1062-2012 Quality Grading of Thoreau Grass Seeds

Shandong Provincial Standard of the People's Republic of China, formula and molecular weight

DB37/T 176-1993 Forest tree seed quality classification
DB3710/T 191-2023 American ginseng seed quality classification

Hunan Provincial Standard of the People's Republic of China, formula and molecular weight

DB43/T 926-2014 Liquidambar Seed Quality Grading

Shanxi Provincial Standard of the People's Republic of China, formula and molecular weight

DB14/T 137-2018 Forest tree seed quality classification

Liaoning Provincial Standard of the People's Republic of China, formula and molecular weight

DB21/T 1290-2004 Forest tree seed quality grading

Professional Standard - Electron, formula and molecular weight

SJ/T 9509-1993 Granding stander of quility for electronic tuners used in TV broadcasting receivers
SJ/T 9525-1993 Quality grade standard for electronic organ

BE-NBN, formula and molecular weight

NBN X 02-108-1989 Quantifies and units of physical chemistry and molecular physics

国家技术监督局, formula and molecular weight

GB/T 3102.8-1993 Quantities and units of physical chemistry and molecular physics

Danish Standards Foundation, formula and molecular weight

DS/EN ISO 80000-10:2013 Quantities and units - Part 10: Atomic and nuclear physics
DS/EN 62363:2011 Radiation protection instrumentation - Portable photon contamination meters and monitors
DS/ISO 31/8:1984 Quantities and units of physical chemistry and molecular physics
DS/EN ISO 80000-9:2013 Quantities and units - Part 9: Physical chemistry and molecular physics

ES-UNE, formula and molecular weight

UNE-EN ISO 80000-10:2021 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019)
UNE-EN ISO 16014-5:2020 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
UNE-EN ISO 80000-9:2021 Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2019)

(U.S.) Telecommunications Industries Association , formula and molecular weight

TIA TSB-62-3-1995 ITM-3 Mode Power Distribution and Mode Transfer Function Measurement

TIA - Telecommunications Industry Association, formula and molecular weight

TSB-62-3-1995 ITM-3 Mode Power Distribution and Mode Transfer Function Measurement
TSB62-3-1995 ITM-3 Mode Power Distribution and Mode Transfer Function Measurement

VN-TCVN, formula and molecular weight

TCVN 6855-16-2001 Measurements of the electrical properties of electronic tubes and valves.Part 16: Methods of measurement of television picture tubes
TCVN 7870-9-2010 Quantities and units.Part 9: Physical chemistry and molecular physics

European Committee for Electrotechnical Standardization（CENELEC）, formula and molecular weight

EN 62363:2011 Radiation protection instrumentation - Portable photon contamination meters and monitors

Military Standard of the People's Republic of China-General Armament Department, formula and molecular weight

GJB 1965-1994 Determination of molecular weight and molecular weight distribution of hydroxyl-terminated polybutadiene by gel permeation chromatography

U.S. Military Regulations and Norms, formula and molecular weight

ARMY MIL-S-52986 NOTICE 1-1998 SCRAPER, ELEVATING, SELF-PROPELLED, 9 CUBIC YARD MINIMUM HEAPED CAPACITY, SECTIONALIZED AND NON- SECTIONALIZED
ARMY MIL-S-52986-1980 SCRAPER, ELEVATING, SELF-PROPELLED, 9 CUBIC YARD MINIMUM HEAPED CAPACITY, SECTIONALIZED AND NON- SECTIONALIZED

Xinjiang Provincial Standard of the People's Republic of China, formula and molecular weight

DB65/T 3010-2009 Quality grading of the princes.feather(Amaranthus hypochondriacus L.)seeds
DB65/T 3009-2009 Quality grading of the Chinese ephedra(EphedraL.)seeds

ET-QSAE, formula and molecular weight

ES 478-2000

Guangxi Provincial Standard of the People's Republic of China, formula and molecular weight

DB45/T 1728-2018 Grass coral seed quality classification

Hebei Provincial Standard of the People's Republic of China, formula and molecular weight

DB13/T 614-2005 Seedling quality grading Pinus sylvestris

US-FCR, formula and molecular weight

FCR FED HANDBOOK 72-1960 MEASUREMENT OF NEUTRON FLUX AND SPECTRA FOR PHYSICAL AND BIOLOGICAL APPLICATIONS

American Gas Association, formula and molecular weight

AGA GMM-8-1988 Gas Measurement Manual - Part 8: Electronic Flow Computers and Transducers (XQ8805)

Professional Standard - Military and Civilian Products, formula and molecular weight

WJ/Z 239-1988 Height, depth gauge type and size Lever type depth gauge 0~10mm
WJ/Z 240-1988 Height, depth gauge type and size Lever type depth gauge 0.06~0.65mm

工业和信息化部, formula and molecular weight

WJ/Z 239-2014 Height and depth gauge types and sizes Lever type depth gauge 0mm～10mm
WJ/Z 240-2014 Height and depth gauge types and sizes Lever type depth gauge 0.06mm～0.65mm
WJ/Z 228-2014 Height and depth gauge types and sizes Vernier depth gauge L0=1mm～250mm

CENELEC - European Committee for Electrotechnical Standardization, formula and molecular weight

EN 60846-2:2018 Radiation protection instrumentation – Ambient and/ or directional dose equivalent (rate) meters and/or monitors for beta@ X and gamma radiation – Part 2: High range beta and photon dose and dose rate portable instruments for emergency radiation protectio

Sichuan Provincial Standard of the People's Republic of China, formula and molecular weight

DB51/T 2522-2018 Inspection Technology and Quality Grading of Indigo indigo Seeds

农业农村部, formula and molecular weight

NY/T 3252.2-2018 Industrial Hemp Seeds Part 2: Seed Quality
NY/T 1860.35-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 35: Determination of Polymer Molecular Weight and Molecular Weight Distribution (Gel Permeation Chromatography)

Professional Standard - Energy, formula and molecular weight

NB/T 20215-2013 Type test of movable micro-fission chamber for pressurized water reactor nuclear power plants in-core neutron flux measurement

SAE - SAE International, formula and molecular weight

SAE ARP1971B-2003 Aircraft Deicing Vehicle - Self-Propelled@ Large and Small Capacity

Professional Standard - Light Industry, formula and molecular weight

QB/T 2668.2-2017 Ultra-high-molecular-weight polyethylene (PE-UHMW) pipe fittings
QB/T 2668-2004 Ultra-high-molecular-weight polyethylene (PE-UHMW) pipes
QB/T 2668.1-2017 Ultra-high-molecular-weight polyethylene (PE-UHMW) pipes

Professional Standard - Textile, formula and molecular weight

FZ/T 63028-2015 Ultra-high molecular weight polyethylene netting twine
FZ/T 54027-2010 Ultra-high molecular weight polyethylene (UHMWPE) filament yarns
FZ/T 54027-2022 UHMWPE Filament

GM North America, formula and molecular weight

GM GMP.POM.012-1989 Acetal - High Molecular Weight Copolymer
GM GMP.PE.050-1991 Polyethylene - High Density, High Molecular Weight
GM GMP.PE.062-2001 Polyethylene - High Density, High Molecular Weight

Ningxia Provincial Standard of the People's Republic of China, formula and molecular weight

DB64/T 1182-2016 Quality classification of main forest tree seeds

Henan Provincial Standard of the People's Republic of China, formula and molecular weight

DB41/T 893-2014 UHMWPE sheet

ZA-SANS, formula and molecular weight

SANS 1700-2-9:1996 Fasteners Part 2: Screw threads Section 9: ISO general-purpose metric screw threads - Gauges and gauging