13.220.40 材料和制品的可燃性和燃烧性能 标准查询与下载

GB/T 8332-1987 泡沫塑料燃烧性能试验方法 水平燃烧法

本标准适用于实验室条件下评定泡沫塑料（也适用于泡沫橡胶）小试样的相对水平燃烧性能，但不能作为评定实际使用条件下着火危险性的依据。

Test method for flammability of cellular plastics--Horizontal burning method

GB/T 8323-1987 塑料燃烧性能试验方法 烟密度法

本标准适用于测定塑料燃烧时所产生烟雾的比光密度，并以最大比光密度为试验结果。它仅用于评定在规定条件下塑料的发烟性能，不能作为评定实际使用条件下发烟危害性的依据。

Test method for flammability of plastics--Smoke density test

GB/T 7633-1987 门和卷帘的耐火试验方法

本标准适用于建筑用有樘门、无樘门和卷帘的耐火试验，通过试验确定其耐火极限。

Fire resistance test method of door and shutter assemblies

GB/T 5169.3-1985 电工电子产品着火危险试验 电子元件着火危险评定技术要求和试验规范制订导则

在开展电子元件着火危险试验时，应充分考虑到下述各项因素： 各类电子元件是用不同材料制成的，它们安装在各种不同的设备内。电子元件在设备内的排列是比较紧凑的，彼此间的间隔很小，它们在使用中会出现什么样的情况是难以预料的。 电子设备是通过使用电能来维持其正常工作的，某些电子元件（如继电器）在使用时有可能产生火花，但其热损耗通常是很少的。然而，当电子元件出现故障或处在反常的状态下工作时，它们往往会散发出大量的热量。 在设备中使用的电子元件数量往往是很大的，由于它们的功能不同，它们所处的工作状态也不同，这就很难用一个统一的指标来描述它们。并非所有电子元件的着火危险性都一样大，只有某些电子元件特别容易着火，其危害性也特别大。着火危险试验和研究工作正是针对这一部分电子元件来进行的。

Fire hazard testing for electric and electronic products--Guidance for the preparation of requirements and test specifications for assessing fire hazard of electronic components

GB/T 5169.8-1985 电工电子产品着火危险试验 评定试验规程举例和试验结果解释 燃烧特性及其试验方法的评述

燃烧是叙述系统中很多相互作用的过程，相互的关系通常是很复杂的，能被分析仅是局部和概念明确的状态。 着火试验是为测量或评定材料、产品、结构或系统对一种或多种着火方式的反应。着火试验的结果是评定和控制着火危险必须考虑的因素。 本标准等同采用国际标准IEC695-3-1（1984年）第一版。

Fire hazard testing for electric and electronic products--Examples of fire hazard assessment procedures and interpretation of results--Combustion characteristics and survey of test methods for their determination

GB/T 5169.7-1985 电工电子产品着火危险试验 本生灯型火焰试验方法

Fire hazard testing for electric and electronic products--Test method of bunsen type flame

GSO IEC 60695-1-30:2024 火灾危险测试 第1-30部分：电工产品火灾危险评估指南 预选测试过程 一般指南

IEC 60695-1-30:2017 provides guidance for assessing and choosing candidate materials, components or sub-assemblies for making an end product based upon preselection testing. It describes how preselection provides comparative fire hazard test methods to evaluate the performance of a test specimen and how preselection can be used in the selection of materials, parts, components and sub-assemblies during the design stage of an end product. It further describes how standardized test methods may be used as one part in the decision making processes directed to minimize the fire hazards from electrotechnical equipment. It takes into account the desired reaction to fire properties of the end product, and the possible effects of environmental conditions on the behaviour of the end product. This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Reference to IEC 60695-1-12; - Modified Introduction; - Clause 2: updated and additional normative references; - Clause 3: updated and additional terms and definitions; - Clause 4: updated text, with a requirement and normative reference to IEC 60695-1-10, IEC 60695-1-11 and IEC 60695-1-12; - Clause 5: modified text; - Annex A: updated references with additions and deletions; - Annex B: Examples of materials used in attended appliances replaces the previous example of an ITE product and the Bibliographic references updated. It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51. This standard is to be used in conjunction with IEC 60695-1-10:2016 and IEC 60695-1-11:2014. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51.

Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines

GSO EN 71-2:2024 玩具安全 第2部分：易燃性

This European Standard specifies the categories of flammable materials which are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a small source of ignition. The test methods described in Clause 5 are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or materials when subjected to other sources of ignition. This European Standard includes general requirements relating to all toys and specific requirements and methods of test relating to the following toys, which are considered as being those presenting the greatest hazard: — toys to be worn on the head: beards, moustaches, wigs, etc. made from hair, pile or material with similar features; masks; hoods, head-dresses, etc.; flowing elements of toys to be worn on the head, but excluding paper novelty hats of the type usually supplied in party crackers; — toy disguise costumes and toys intended to be worn by a child in play; — toys intended to be entered by a child; — soft-filled toys. NOTE Additional requirements for flammability of electric toys are specified in EN 62115.

Safety of toys - Part 2: Flammability

GSO IEC 60695-9-2:2024 火灾危险测试 第9-2部分：火焰表面蔓延 测试方法总结和相关性

IEC 60695-9-2:2021 presents a summary of published test methods that are used to determine the surface spread of flame of electrotechnical products or materials from which they are formed. It represents the current state of the art of the test methods and, where available, includes special observations on their relevance and use. The list of test methods is not to be considered exhaustive, and test methods that were not developed by the IEC are not to be considered as endorsed by the IEC unless this is specifically stated. This summary cannot be used in place of published standards which are the only valid reference documents. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications. This International Standard is to be used in conjunction with IEC 60695-1. This second edition cancels and replaces the first edition of IEC 60695-9-2 published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Updated introduction b) Updated normative references c) Updated terms and definitions d) New Subclauses 4.1 and 4.2 e) Reference to fire stages as defined in ISO 19706 (Table 1) f) New sub-division of tests into the following subclauses: 4.3 Small-scale fire tests 4.4 Medium and intermediate-scale fire tests 4.5 Intermediate and large-scale fire tests for cables 4.6 Real-scale fire tests for cables g) Updated text in parts of Clause 4 h) Addition of the following test methods: IEC TS 60695-11-21 IEC 60684-2:2011, Clause 26 ISO 3582 ISO 9772 ISO 9773 ISO 12992 ISO 21367 i) New Clause 5 and Table 4 giving an overview of test methods j) Deletion of all the Annexes k) Updated bibliography

Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods

ASTM G72/G72M-24 高压富氧环境中液体和固体自燃温度的标准试验方法

Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment

ASTM F1959/F1959M-24 测定服装材料电弧额定值的标准试验方法

Standard Test Method for Determining the Arc Rating of Materials for Clothing

ASTM E2688-23 评估表面燃烧特性的试样制备和胶带安装的标准实施规程

Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics

ASTM F1959/F1959M-23a 测定服装材料电弧额定值的标准试验方法

Standard Test Method for Determining the Arc Rating of Materials for Clothing

ISO 23948:2023 塑料聚氯乙烯材料和产品的膨胀性能锥形量热计测量膨胀的试验方法

Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter

ASTM E2579-23b 评估表面燃烧特性的木制品样品制备和安装的标准实施规程

Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics

ASTM E1725-23 电气系统部件用耐火屏障系统防火试验的标准试验方法

Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components

ASTM F1959/F1959M-23 测定服装材料电弧额定值的标准试验方法

Standard Test Method for Determining the Arc Rating of Materials for Clothing

IEC 60512-99-003:2023 电气和电子设备用连接器.试验和测量.第99-003部分:耐久性试验一览表.试验99c:在电负载下分离（未配合）的平衡单对连接器的试验一览表

Connectors for electrical and electronic equipment - Tests and measurements - Part 99-003: Endurance test schedules - Test 99c: Test schedule for balanced single-pair connectors separating (unmating)

ASTM D4151-23 毯子易燃性的标准试验方法

Standard Test Method for Flammability of Blankets

XF/T 91-2023 阻燃篷布

Flame retardant tarpaulin