13.220.99 有关消防的其他标准 标准查询与下载

BS EN 15882-2:2015 服务设施耐火试验结果的扩展应用. 防火档板

Extended application of results from fire resistance tests for service installations. Fire dampers

EN 15882-2:2015 服务设施耐火试验结果的扩展应用 第2部分：防火阀

This European Standard provides guidance and rules to notified bodies (for fire dampers) to allow them to produce/validate an extended field of application report for fire dampers. This standard identifies the parameters that affect the fire resistance of dampers. It also identifies the factors that need to be considered when deciding whether, or by how much, the parameter can be extended when contemplating the fire resistance performance of an untested, or untestable variation in the construction. This European Standard explains the principles behind how a conclusion on the influence of specific parameters/constructional details relating to the relevant criteria (E,I,S) can be achieved. This European Standard does not cover dampers used for smoke control. This European Standard only applies to extended fields of application based on tests successfully undertaken to EN 1366-2. Only test reports that have a total test time where the criteria are fulfilled that is in excess of the required classification period by a margin of either 10 % or 12 min, whichever is the least, are to be considered. Each classification (E,I,S) is to be considered individually - consequently E (134 min achieved) may be extended, but EI (61 min achieved) may not be extended for a classification of EI60. Additionally, leakage determined during such tests is to be at least 10 % below the leakage limits for E, or for E-S, dependent on classification achieved, given in EN 13501-3 before the EXAP rules can be applied. The 10 % below the leakage limits is to be fulfilled for the extended period in addition to the classification period. By application of this European Standard, it should be possible to identify what specifications should be tested to maximize the field of application. Some information on test programmes is given for guidance purposes.

Extended application of results from fire resistance tests for service installations - Part 2: Fire dampers

GSO ISO 13344:2014 估计液体火灾废物的致命毒性效果

This International Standard provides a means for estimating the lethal toxic potency of the fire effluents produced from a material while exposed to the specific combustion conditions of a physical fire model. The lethal toxic potency values are specifically related to the fire model selected, the exposure scenario and the material evaluated. Lethal toxic potency values associated with 30-min exposures of rats are predicted using calculations which employ combustion atmosphere analytical data for carbon monoxide (CO), carbon dioxide (CO2), oxygen (O2) (vitiation) and, if present, hydrogen cyanide (HCN), hydrogen chloride (HCl), hydrogen bromide (HBr), hydrogen fluoride (HF), sulfur dioxide (SO2), nitrogen dioxide (NO2), acrolein and formaldehyde. If the fire effluent toxic potency cannot be attributed to the toxicants analysed, this is an indication that other toxicants or factors must be considered. This International Standard is applicable to the estimation of the lethal toxic potency of fire effluent atmospheres produced from materials, products or assemblies under controlled laboratory conditions and should not be used in isolation to describe or appraise the toxic hazard or risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire hazard assessment that takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use; see ISO/TS 19706. The intended use of fire safety-engineering calculations is for life-safety prediction for people and is most frequently for time intervals somewhat shorter than 30 min. This extrapolation across species and exposure intervals is outside the scope of this International Standard. This International Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices.

Estimation of the lethal toxic potency of fire effluents

DB64/T 1019-2014 建（构）筑物消防设施维护保养技术规范

Technical specifications for maintenance of fire protection facilities of buildings (structures)

DB22/T 2065-2014 消防安全网格化管理规范

Fire safety grid management specification

DB22/T 370-2014 建筑逃生缓降器设置技术规范

Technical specifications for the setting of building escape and descending devices

DB22/T 2066-2014 小型人员密集场所消防安全管理规范

Code of fire safety management for small densely populated places

GSO ISO/TR 16312-2:2013 用于获取废水毒性数据和评估危害和风险的物理火灾模型有效性评估指南 第2部分：评估单个物理火灾模型

This part of ISO 16312 assesses the utility of physical fire models that have been standardized, are commonly used and/or are cited in national or international standards, for generating fire effluent toxicity data of known accuracy. It does so using the criteria established in ISO 16312-1 and the guidelines established in ISO 19706. The aspects of the models that are considered are the intended application of the model, the combustion principles it manifests, the fire stage(s) that the model attempts to replicate, the types of data generated, the nature and appropriateness of the combustion conditions to which test specimens are exposed and the degree of validity established for the model.

Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment -- Part 2: Evaluation of individual physical fire models

GSO ISO 16312-1:2013 用于获取废水毒性数据和评估危害和风险的物理火灾模型的有效性评估指南 第1部分：标准

This part of ISO 16312 provides technical criteria and guidance for evaluating physical fire models (i.e. laboratory combustion devices and operating protocols) used in effluent toxicity studies for obtaining data on the effluent from products and materials under fire conditions relevant to life safety[2]. Relevant analytical methods, calculation methods, bioassay procedures and prediction of the toxic effects of fire effluents can be referenced in ISO 19701[3], ISO 19702[4], ISO 19703[5], ISO 19706[6], ISO 13344[7], and ISO 13571.

Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment -- Part 1: Criteria

KS F ISO TR 9122-6-2013 火灾废水毒性测试第6部分：监管机构和规范制定者建筑和交通火灾毒性危害评估指南

Toxicity testing of fire effluents－Part 6：Guidance for regulators and specifiers on the assessment of toxic hazard in fires in buildings and transport

DB11/ 1022-2013 简易自动喷水灭火系统设计规程

Code for Design of Simple Automatic Sprinkler System

DB11/ 1026-2013 吸气式感烟火灾探测报警系统设计、施工及验收规范

Code for design, construction and acceptance of aspirating smoke detection and alarm system

DB11/ 1025-2013 自然排烟系统设计、施工及验收规范

Specifications for design, construction and acceptance of natural smoke exhaust system

DB11/ 1023-2013 疏散用门安全控制与报警逃生门锁系统设计、施工及验收规程

Regulations for design, construction and acceptance of evacuation door safety control and alarm escape door lock system

DB50/T 498-2013 消防疏散引导箱

本标准规定了消防疏散引导箱的分类与型号、技术要求、试验方法、检验规则、标识、使用说明书、包装、运输和贮存。 本标准适用于箱体主体材料为金属的引导箱。箱体主体材料为非金属不燃性材料的引导箱可参照使用。

Fire evacuation guide box

GA/T 1040-2013 建筑倒塌事故救援行动规程

本标准规定了建筑倒塌事故救援的术语和定义、总则、救援程序和行动要求。 本标准适用于公安消防部队处置建筑倒塌事故的救援行动。专职消防队等其他专业救援队伍进行建筑倒塌事故救援时可参照执行。

Code of practice for rescue operation of building collapse accident

XF/T 1040-2013 建筑倒塌事故救援行动规程

Building collapse accident rescue operation procedures

ANSI/ASTM E2912:2013 排放结构中非机械防火挡板燃烧试验方法

Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction

XF 1035-2012 消防产品工厂检查通用要求

General requirements for factory inspection of fire protection products

XF/T 1039-2012 消防员心理训练指南

A Guide to Psychological Training for Firefighters