13.220.99 有关消防的其他标准 标准查询与下载

ISO/TR 16312-2:2021 火灾危险和风险评估用获取燃烧馏出物毒性数据的物理防火模型有效性评价指南. 第2部分: 评估独立的物理防火模型

Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment - Part 2: Evaluation of individual physical fire models

T/ZBTA 09-2020 建筑施工现场消防安全管理规范

本标准共分8章，主要技术内容包括：1.范围；2.规范性引用文件；3.术语和定义；4.组织管理；5.技术管理；6.设施管理；7.作业管理；8.应急管理。

guidelines for management on fire control and safety in construction site

ANSI/CAN/UL 5800:2020 电池防火产品

1 Scope 1.1 These requirements provide fire test and performance criteria to evaluate fire containment products intended for a battery-powered portable electronic device (PED). 1.2 The containment product may include active fire suppression features without manual intervention beyond arming the suppression agent. 1.3 These requirements cover fire containment products that are intended to be used by a qualified/trained person. 1.4 This standard covers installed and uninstalled lithium ion batteries and cells. 1.5 The fire condition represented by the testing in this standard simulates the ignition of a batterypowered portable electronic device (PED), combustible components, and assemblies associated with the device. 1.6 These requirements cover containment products intended to be used for inhabited aircraft compartments. 1.7 The fire condition represented by this test is limited to devices with electrical energy with a maximum of 300 Wh. 1.8 This standard evaluates the containment product performance from the time that the batterypowered portable electronic device (PED) is inside the containment product which is closed in accordance with the containment product manufacturer’s instructions. 1.9 This standard covers containment products to be used for only one thermal runaway event. 1.10 These requirements do not cover fires caused by non-battery operated devices. 1.11 These requirements cover visible smoke, but do not cover the mitigation of gas (toxic, flammable). 1.12 These requirements do not cover containment products intended to be used for cargo protection. 1.13 These requirements do not cover fire containment products with active fire suppression means requiring manual operation beyond arming the suppression agent, such as utilizing separate handheld fire extinguishers.

Battery Fire Containment Products

CSA ANSI/CAN/UL 5800-2020 电池防火产品

Battery Fire Containment Products

BS 7629-1:2015+A1:2019 电缆 受火影响时烟雾和腐蚀性气体排放量较低的 300/500 V 耐火、屏蔽、固定安装电缆规范 多芯电缆

Electric cables. Specification for 300/500 V fire resistant, screened, fixed installation cables having low emission of smoke and corrosive gases when affected by fire. Multicore cables

XF/T 3011-2020 逃生与救援用车窗玻璃电动击碎装置

Electric window glass breaking device for escape and rescue

XF/T 3001-2020 水域救援作业指南

Water rescue operation guide

DB3304/T 051-2020 小型商业网点消防安全管理

Fire safety management of small commercial outlets

T/SNFPA 001-2020 企业专职消防救援队运营管理规范

主要技术内容涉及到企业专职消防救援队运营管理中的人员配备、岗位职责、管理费用以及执勤管理等方面的具体要求，为全省企业专职消防救援队提高行业整体服务水平，同时也为政府部门的监督管理提供一个科学的依据。起草小组结合国内外先进管理经验，结合我省企业专职消防救援队的实际情况，确定的本标准主要技术内容如下： 1)　人员配备 本标准规定了企业专职消防救援队应设有的必要岗位、人员条件及人员数量的要求。 2)　岗位职责 本标准规定了企业专职消防救援队必要岗位的职责。 3)　管理费用 本标准规定了企业专职消防救援队人员工资待遇及运营费用类别。 4)　执勤管理 本标准规定了企业专职消防救援队在日常管理、执勤训练、灭火救援、称谓和标识中的具体管理措施。

Operation and management specification for full-time enterprise fire brigade

ASTM F3386/F3386M-20 爆震阻火器的默认规范

Standard Specification for Detonation Flame Arresters

ASTM E2886/E2886M-20 用于评估外部通风口抵抗残余物进入和直接火焰冲击的能力的标准测试方法

1.1 This fire-test-response standard prescribes two individual methods to evaluate the ability of a gable end, crawl space (foundation) and other vents that mount on a vertical wall or in the under-eave area to resist the entry through the vent opening of embers and flame. The ability of such vents to completely exclude entry of flames or embers is not evaluated. Roof ridge and off-ridge (field) vents are excluded from this standard. Acceptance criteria are not provided in this standard. NOTE 1—Test Method E2912 records information relevant to evaluate completely excluding the entry of flames through the venting device. 1.2 Ember entry and flame penetration are evaluated separately using different test procedures. A commentary and summary of the development of the ember test apparatus are given in Appendix X1. 1.3 These laboratory tests are used to evaluate the response of vents when subjected to ember and flame exposures under controlled conditions. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.5 Unless otherwise specified, the tolerance for dimensions in figures and text in this document shall be 65 %. 1.6 This test method does not address interior fire spread. 1.7 The standard is used to measure and describe the response of materials, products or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessments of the materials, products or assemblies and other cladding materials under actual fire conditions. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement

T/CEC 373-2020 预制舱式磷酸铁锂电池储能电站消防技术规范

本文件规定了预制舱式磷酸铁锂电池储能电站消防设计、建设、运行维护的技术要求。 本文件适用于新建、扩建、改建户外无人值班的系统容量10MW·h及以上的预制舱式磷酸铁锂电池储能电站。系统容量10MW·h以下的预制舱式磷酸铁锂电池储能电站可参照执行。

Technical specification for fire protection of prefabricated cabin lithium iron phosphate battery energy storage power station

DB12/T 949-2020 消防设施物联网监控系统技术标准

Technical Standards for Internet of Things Monitoring System for Fire-fighting Facilities

DB15/T 1895-2020 建筑消防设施维护保养技术规程

Technical regulations for maintenance of building fire protection facilities

DB15/T 353.2-2020 建筑消防设施检验规程 第2部分：消火栓系统

Inspection regulations for building fire protection installations part 2: fire hydrant system

DB15/T 353.4-2020 建筑消防设施检验规程 第4部分：消防炮灭火系统

Inspection regulations for building fire protection installations part 4: fire monitor fire extinguishing system

DB15/T 353.5-2020 建筑消防设施检验规程 第5部分：干粉灭火系统

Inspection regulations for building fire protection installations part 5: dry powder fire extinguishing system

DB15/T 353.9-2020 建筑消防设施检验规程 第9部分：防火门、防火卷帘系统

Building Fire Protection Installation Inspection Regulations Part 9: Fire Door, Fire Roller Shutter System

DB15/T 353.7-2020 建筑消防设施检验规程 第7部分：气体灭火系统

Inspection regulations for building fire protection installations part 7: gas fire extinguishing system

DB15/T 353.11-2020 建筑消防设施检验规程 第11部分：消防电话系统

Building Fire Protection Installation Inspection Regulations Part 11: Fire Protection Telephone System